Hierarchical porous structure formation mechanism in food waste component derived N-doped biochar: Application in VOCs removal

Seafood waste derived carbon nanomaterials for removal and detection of food safety hazards

Nanobiotechnology and the engineering of nanomaterials are currently the main focus of many researches. Seafood waste carbon nanomaterials (SWCNs) are a renewable resource with large surface area, porous structure, high reactivity, and abundant active sites. They efficiently adsorb food contaminants through π-π conjugated, ion exchange, and electrostatic interaction. Furthermore, SWCNs prepared from seafood waste are rich in N and O functional groups. They have high quantum yield (QY) and excellent fluorescence properties, making them promising materials for the removal and detection of pollutants. It provides an opportunity by which solutions to the long-term challenges of the food industry in assessing food safety, maintaining food quality, detecting contaminants and pretreating samples can be found. In addition, carbon nanomaterials can be used as adsorbents to reduce environmental pollutants and prevent food safety problems from the source. In this paper, the types of SWCNs are reviewed; the synthesis, properties and applications of SWCNs are reviewed and the raw material selection, preparation methods, reaction conditions and formation mechanisms of biomass-based carbon materials are studied in depth. Finally, the advantages of seafood waste carbon and its composite materials in pollutant removal and detection were discussed, and existing problems were pointed out, which provided ideas for the future development and research directions of this interesting and versatile material. Based on the concept of waste pricing and a recycling economy, the aim of this paper is to outline current trends and the future potential to transform residues from the seafood waste sector into valuable biological (nano) materials, and to apply them to food safety.

Performance and mechanism of benzene adsorption on ZnCl2 one-step modified corn cob biochar

Utilizing cost-effective corn cob, zinc chloride-modified biochar was synthesized through one-step method for benzene adsorption from air. Study on impregnation ratio impact showed optimal benzene adsorption at ZnCl2:CC ratio of 1.5:1, with capacity reaching 170.53 mg g-1. Characterization using BET, SEM, FTIR, and XPS was conducted. BET results indicated specific surface area of Zn1.5BC at 1260.63 m2 g-1 and maximum pore volume of 0.546 m3 g-1. SEM analysis revealed microporous-mesoporous structure in Zn1.5BC, marking significant improvement over original biomass. DFT pore size distribution and FTIR analysis suggested post-modification dehydration and elimination reactions, leading to volatile compound release, functional group reduction, and pore widening. XPS analysis showed decrease in O = C-OH content with increased impregnation ratio, enhancing biochar's π-π electron diffusion for benzene. Langmuir isotherm and pseudo-second-order kinetic models effectively described experimental data, indicating multilayer benzene adsorption on biochar controlled by complex physicochemical adsorption and pore diffusion. Adsorption condition assessment, including adsorption temperature (20-120 ℃) and benzene concentration in inlet phase (159.73-383.36 mg L-1), was performed. Yoon-Nelson model fitting indicated adsorption site loss at higher temperatures and reduced capture ability due to increased adsorbate molecule kinetic energy. Higher adsorbate concentrations aided adsorption molecule diffusion to biochar surface and internal pores, increasing adsorption rate and shortening equilibrium time. Overall, zinc chloride-modified biochar facilitates benzene adsorption through pore filling and π-π interactions, with pore filling as primary mechanism. Produced biochar shows excellent regeneration properties and reusability.

A new attempt to control volatile organic compounds (VOCs) pollution - Modification technology of biomass for adsorption of VOCs gas

The detrimental impact of volatile organic compounds on the surroundings is widely acknowledged, and effective solutions must be sought to mitigate their pollution. Adsorption treatment is a cost-effective, energy-saving, and flexible solution that has gained popularity. Biomass is an inexpensive, naturally porous material with exceptional adsorbent properties. This article examines current research on volatile organic compounds adsorption using biomass, including the composition of these compounds and the physical (van der Waals) and chemical mechanisms (Chemical bonding) by which porous materials adsorb them. Specifically, the strategic modification of the surface chemical functional groups and pore structure is explored to facilitate optimal adsorption, including pyrolysis, activation, heteroatom doping and other methods. It is worth noting that biomass adsorbents are emerging as a highly promising strategy for green treatment of volatile organic compounds pollution in the future. Overall, the findings signify that biomass modification represents a viable and competent approach for eliminating volatile organic compounds from the environment.

Preparation of a Novel Straw-Sludge Activated Biochar and Its Adsorption Mechanisms for Removal of VOCs

To simultaneously achieve the objectives of waste resource utilization and clean production, a novel approach involving the utilization of corn straw-sludge hybrid biochar was proposed for the adsorption of VOCs emitted from biomass power plants. This study analyzed the effect of straw-sludge biochar on the adsorption characteristics of VOCs (toluene, isopentane, and ethylene) under different preparation conditions (raw material ratio, activation temperature, and activation time). The findings revealed that the adsorption efficiency of the mixed biochar was significantly superior to that of individual corn straw biochar and sludge biochar. The adsorption of methylbenzene, isopentane, and ethylene was 78.32, 40.81, and 41.18% higher, respectively, compared to the control groups consisting of pure sludge biochar and pure corn straw biochar. Moreover, the adsorption performance of the activated biochar followed the sequence of ethylene < isopentane < methylbenzene in terms of both saturation time and adsorption capacity. The adsorption capacity of VOCs on straw biochar-sludge biochar demonstrated a consistent correlation with the boiling point and molecular weight of the adsorbate, with higher adsorption capacities observed for adsorbates with larger boiling points and molecular weights, specifically methylbenzene > isopentane > ethylene.

Management of typical VOCs in air with adsorbents: status and challenges

The serious harm of volatile organic compounds (VOCs) to the ecological environment and human health has attracted widespread attention worldwide. With economic growth and accelerated industrialization, the anthropogenic emissions of VOCs have continued to increase. The most crucial aspect is to choose the appropriate adsorbent, which is very important for the VOCs removal. The search for environmentally friendly VOCs treatment technologies is urgent. The adsorption method is one of the most promising VOCs emission reduction technologies with the advantages of high cost-effectiveness, simple operation, and low energy consumption. One of the most critical aspects is the selection of the appropriate adsorbent, which is very important for the removal of VOCs. This work provides an overview of the sources and hazards of VOCs, focusing on recent research advances in VOCs adsorption materials and the key factors controlling the VOCs adsorption process. A summary of the key challenges and opportunities for each adsorbent is also provided. The adsorption capacity for VOCs is enhanced by an abundant specific surface area; the most efficient adsorption process is achieved when the pore size is slightly larger than the molecular diameter of VOCs; the increase in the number of chemical functional groups contributes to the increase in adsorption capacity. In addition, methods of activation and surface modification to improve the adsorption capacity for VOCs are discussed to guide the design of more advanced adsorbents.

Chicken Cartilage-Derived Carbon for Efficient Xylene Removal

Chicken cartilage was used for the first time as a raw material for the microwave-assisted synthesis of biochar and activated carbon. Various microwave absorbers, i.e., commercial active carbon, scrap tyres, silicon carbide, and chicken bone-derived biochar, as well as various microwave powers, were tested for their effect on the rate of pyrolysis and the type of products formed. Biochars synthesised under 400 W in the presence of scrap tyres and chicken bone-derived biochar were activated with KOH and K₂CO₃ with detergent to produce activated carbon with a highly developed porous structure that would be able to effectively adsorb xylene vapours. All carbons were thoroughly characterised (infrared spectroscopy, X-ray fluorescence spectrometry, nitrogen adsorption/desorption, Raman spectroscopy, proximate and ultimate analysis) and tested as xylene sorbents in dynamic systems. It was found that the activation causes an increase of up to 1042 m²·g^-1 in the specific surface area, which ensures the sorption capacity of xylene about 300 mg·g^-1. Studies of the composition of biogas emitted during pyrolysis revealed that particularly valuable gaseous products are formed when pyrolysis is carried out in the presence of silicon carbide as a microwave absorber.

Biomass Derived, Hierarchically Porous, Activated Starbons® as Adsorbents for Volatile Organic Compounds

The use of potassium hydroxide activated Starbons® derived from starch and alginic acid as adsorbents for 29 volatile organic compounds (VOCs) was investigated. In every case, the alginic acid derived Starbon (A800K2) was found to be the optimal adsorbent, significantly outperforming both commercial activated carbon and starch derived, activated Starbon (S800K2). The saturated adsorption capacity of A800K2 depends on both the size of the VOC and the functional groups it contains. The highest saturated adsorption capacities were obtained with small VOCs. For VOC's of similar size, the presence of polarizable electrons in lone pairs or π-bonds within non-polar VOCs was beneficial. Analysis of porosimetry data suggests that the VOC's are being adsorbed within the pore structure of A800K2 rather than just on its surface. The adsorption was completely reversible by thermal treatment of the saturated Starbon under vacuum.

Adsorption of multicomponent VOCs on various biomass-derived hierarchical porous carbon: A study on adsorption mechanism and competitive effect

Biomass-derived porous carbon materials are potential adsorbents for VOCs. In this work, biomass-derived nitrogen-doped hierarchical porous carbons (NHPCs) were synthesized by a one-step pyrolysis activation combined with nitrogen doping method from several biomass wastes (corn straw, wheat stalk, bamboo, pine, and corncob). NHPCs have a hierarchical porous structure with micro-meso-macropores distribution, nitrogen doping, large specific surface area, and pore volume. The corncob derived carbon (NHPC-CC) has the best activation result as analyses showed that a lower ash content and higher total cellulose composition content of the biomass result in a better pore activation effect. Single and multi-component dynamic adsorption tests of typical VOCs (benzene, toluene, and chlorobenzene) were conducted on NHPCs in laboratory conditions (∼500 ppm). Promising VOC adsorption capacity and great adsorption kinetics with low mass transfer resistance were found on NHPCs. Correlation analysis showed that the high VOC adsorption capacity and great adsorption kinetics can be attributed to the large surface area of micro-mesopores and the mass transfer channels provided by meso-macropores respectively. The competitive dynamic adsorption tests revealed that the VOC with lower saturated vapor pressure has more adsorption sites on the surface of micro-mesopores and stronger adsorption force, which results in the higher adsorption capacity and desorption caused by substitution reaction in VOCs competitive adsorption process. In detail, the process of toluene and chlorobenzene competitive adsorption was described. Besides, well recyclability of NHPC-CC was revealed as the VOCs adsorption capacity reductions were less than 10% after four adsorption-desorption cycles. All studies showed that the NHPC-CC could be potential adsorbent for VOCs in industrial process.

On-Line Thermally Induced Evolved Gas Analysis: An Update-Part 2: EGA-FTIR

The on-line thermally induced evolved gas analysis (OLTI-EGA) is widely applied in many different fields. Aimed to update the applications, our group has systematically collected and published examples of EGA characterizations. Following the recently published review on EGA-MS applications, this second part reviews the latest applications of Evolved Gas Analysis performed by on-line coupling heating devices to infrared spectrometers (EGA-FTIR). The selected 2019, 2020, 2021 and early 2022 references are collected and briefly described in this review; these are useful to help researchers to easily find applications that are sometimes difficult to locate.

Mechanisms of biochar enhanced Cu2O photocatalysts in the visible-light photodegradation of sulfamethoxazole

Cu₂O nanoparticles are decorated with biochars derived from spent coffee grounds (denoted as Cu₂O/SCG) and applied as visible-light-active photocatalysts in the sulfamethoxazole (SMX) degradation. The physicochemical properties of Cu₂O/SCG are identified by various spectral analysis, electrochemical and photochemical techniques. As a result, the Cu₂O/SCG exhibits the higher removal efficiency of SMX than the pristine Cu₂O under visible light irradiation. We can observe that Cu₂O could be incorporated onto the SCG biochars with rich oxygen vacancies/adsorbed hydroxyl groups. In addition, the Cu₂O/SCG has the lower charge transfer resistance, faster interfacial electron transfer kinetics, decreased recombination of charge carriers and superior absorbance of visible light. The construction of band diagrams for Cu₂O/SCG and pristine Cu₂O via UV-vis spectra and Mott-Schottky plots suggest that the band energy shifts and higher carrier density of Cu₂O/SCG may be responsible for the photocatalytic activity enhancements. From the radical scavenger experiments and electron paramagnetic resonance spectra, the aforementioned energy shifts could decrease the energy requirement of transferring photoinduced electrons to the potential for the formation of active superoxide radicals (·O₂^-) via one and two-electron reduction routes in the photocatalytic reaction. A proposed degradation pathway shows that ·O₂^- and h⁺ are two main active species which can efficiently degrade SMX into reaction intermediates by oxidation, hydroxylation, and ring opening. This research demonstrates the alternative replacement of conventional carbon materials for the preparation of biochar-assisted Cu₂O photocatalysts which are applied in the environmental decontamination by using solar energy.

Agro-residual biomass and disposable protective face mask: a merger for converting waste to plastic-fiber fuel via an integrative carbonization-pelletization framework

Incineration and landfilling offer possibilities for addressing high-rate management of COVID-waste streams. However, they can be costly and environmentally unsustainable. In addition, they do not allow to convert them to fuels and chemicals as waste-to-energy and waste-to-product technologies. Therefore, we analyzed whether integrating hydrothermal carbonization (HTC) and pelletization can allow converting the surgical face mask (SFM) and biomass to composite plastic-fiber fuel (CPFF). We blended the plastic material and corncob, peanut shell, or sugarcane bagasse at the proportion of 50:50 (%, dry mass basis) for HTC. We performed the thermal pretreatment of blends in an autoclaving reactor at 180 °C and 1.5 MPa. Then we pelletized the hydrochars in a presser machine at 200 MPa and 125 °C. By analyzing the evidence from our study, we recognized the viability of combining the SFM and agricultural residues for CPFF from comparable technical features of our products to standards for premium-grade wood pellets. For instance, the elemental composition of their low-meltable ash was not stoichiometrically sufficient to severely produce slagging and fouling in the equipment for thermal conversion. Although they contained synthetic polymers in their structures, such as polyethylene from filter layers and nylon from the earloop, they emitted CO and NOx below the critical limits of 200 and 500 mg m-3, respectively, for occupational safety. Therefore, we extended the knowledge on waste-to-energy pathways to transform SFM into high-quality hybrid fuel by carbonization and pelletization. Our framework can provide stakeholders opportunities to address plastic and biogenic waste in the context of a circular economy.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13399-022-03285-4.

Hydroxyapatite tailored hierarchical porous biochar composite immobilized Cd(II) and Pb(II) and mitigated their hazardous effects in contaminated water and soil

A novel composite of hydroxyapatite tailored hierarchical porous biochar (HA-HPB) was synthesized and used for the adsorptive immobilization of Cd(II) and Pb(II) in water and soil. The hierarchical porous biochar (HPB) was prepared from rice husk through a molten-salt-assisted pyrolysis approach; then, a series of HA-HPB (with 0.5, 1, 2, 3, and 4 g of HPB) was prepared with co-precipitation procedure. All HA-HPBs, particularly HA-3HPB, revealed significantly higher removal efficiency of Cd(II) and Pb(II) (≥99.5%) in water than pristine biochar (5.79 - 24.12%). The immobilization efficiency of HA-3HPB for Cd(II) and Pb(II) was slightly inhibited by the ionic strength and co-existing cations. The Langmuir adsorption capacities of Cd(II) and Pb(II) were 88.1 and 110.2 mg/g, respectively. Ion exchange, complexation, cation-π interaction, and precipitation were the key mechanisms involved in the immobilization of Cd(II) and Pb(II) using HA-3HPB. The HA-3HPB reduced the availability of soil Cd (63.5 - 87.8%) and Pb (64.6 - 92.9%) compared to the unamended soil, and thus reduced their content in the Chinese cabbage shoots by 69.3 -95.4% for Cd and 66.5 -97.2% for Pb. These findings demonstrate the effectiveness of HA-HPB for remediation of Cd(II) and Pb(II) contaminated water and soil and mitigating the potential risks.