Novel strategies for 2,8-dichlorodibenzo-p-dioxin degradation using ternary Au-modified iron doped TiO2 catalysts under UV-vis light illumination

Bifunctional photocatalyst/hydrogel composites: Synergistic effects and degradation mechanisms for the degradation of benzo(a)pyrene in smoked sausages

Benzo(a)pyrene (B(a)P) is a structurally stable and carcinogenic compound, and B(a)P deposition and transport from smoking environment particulates to smoked meat products is a global challenge. In this study, a novel photosensitive bifunctional composite gel (ST/SiO2-Mn) was successfully synthesized as a reliable material for reducing PM2.5-B(a)P in the smoke environment. B(a)P removal experiments demonstrated that the adsorption and filtration properties of the gel effectively reduced the emission of PM2.5-B(a)P in smoke environment. The ST/SiO2-Mn gel removed 88.5 % of PM2.5-B(a)P in 240 min, which further led to a 59.7 % decrease in B(a)P on the sausage surface. In addition, photocatalytic experiments demonstrated that the ST/SiO2-Mn composite could effectively remove B(a)P, and 50 μg/mL B(a)P could be completely degraded within 20 min. Free radical trapping experiments showed that superoxide radicals (•O2-) contributed significantly to the degradation process. In conclusion, this study provides valuable insights for effective PM2.5-B(a)P degradation without increasing economic burden.

Toxicity assessment of dioxins and their transformation by-products from inferred degradation pathways

Due to the significant POPs characteristics, dioxins caused concern in public health and environmental protection. Evaluating the toxicity risk of dioxin degradation pathways is critical. OCDD, 1,2,3,4,6,7,8-HpCDD, and 1,2,3,4,6,7,8-HpCDF, which are highly abundant in the environment and have strong biodegradation capabilities, were selected as precursor molecules in this study. Firstly, their transformation pathways were deduced during the metabolism of biometabolism, microbial aerobic, microbial anaerobic, and photodegradation pathways, and density function theory (DFT) was used to calculate the Gibbs free energy to infer the possibility of the occurrence of the transformation pathway. Secondly, the carcinogenic potential of the precursors and their degradation products was evaluated using the TOPKAT modeling method. With the help of the positive indicator (0-1) normalization method and heat map analysis, a significant increase in the toxic effect of some of the transformation products was found, and it was inferred that it was related to the structure of the transformation products. Meanwhile, the strength of the endocrine disrupting effect of dioxin transformation products was quantitatively assessed using molecular docking and subjective assignment methods, and it was found that dioxin transformation products with a higher content of chlorine atoms and molecules similar to those of thyroid hormones exhibited a higher risk of endocrine disruption. Finally, the environmental health risks caused by each degradation pathway were comprehensively assessed with the help of the negative indicator (1-2) standardization method, which provides a theoretical basis for avoiding the toxicity risks caused by dioxin degradation transformation. In addition, the 3D-QSAR model was used to verify the necessity and rationality of this study. This paper provides theoretical support and reference significance for the toxicity assessment of dioxin degradation by-products from inferred degradation pathways.

Antimicrobial Transformation Products in the Aquatic Environment: Global Occurrence, Ecotoxicological Risks, and Potential of Antibiotic Resistance

The global spread of antimicrobial resistance (AMR) is concerning for the health of humans, animals, and the environment in a One Health perspective. Assessments of AMR and associated environmental hazards mostly focus on antimicrobial parent compounds, while largely overlooking their transformation products (TPs). This review lists antimicrobial TPs identified in surface water environments and examines their potential for AMR promotion, ecological risk, as well as human health and environmental hazards using in silico models. Our review also summarizes the key transformation compartments of TPs, related pathways for TPs reaching surface waters and methodologies for studying the fate of TPs. The 56 antimicrobial TPs covered by the review were prioritized via scoring and ranking of various risk and hazard parameters. Most data on occurrences to date have been reported in Europe, while little is known about antibiotic TPs in Africa, Central and South America, Asia, and Oceania. Occurrence data on antiviral TPs and other antibacterial TPs are even scarcer. We propose evaluation of structural similarity between parent compounds and TPs for TP risk assessment. We predicted a risk of AMR for 13 TPs, especially TPs of tetracyclines and macrolides. We estimated the ecotoxicological effect concentrations of TPs from the experimental effect data of the parent chemical for bacteria, algae and water fleas, scaled by potency differences predicted by quantitative structure-activity relationships (QSARs) for baseline toxicity and a scaling factor for structural similarity. Inclusion of TPs in mixtures with their parent increased the ecological risk quotient over the threshold of one for 7 of the 24 antimicrobials included in this analysis, while only one parent had a risk quotient above one. Thirteen TPs, from which 6 were macrolide TPs, posed a risk to at least one of the three tested species. There were 12/21 TPs identified that are likely to exhibit a similar or higher level of mutagenicity/carcinogenicity, respectively, than their parent compound, with tetracycline TPs often showing increased mutagenicity. Most TPs with increased carcinogenicity belonged to sulfonamides. Most of the TPs were predicted to be mobile but not bioaccumulative, and 14 were predicted to be persistent. The six highest-priority TPs originated from the tetracycline antibiotic family and antivirals. This review, and in particular our ranking of antimicrobial TPs of concern, can support authorities in planning related intervention strategies and source mitigation of antimicrobials toward a sustainable future.

Enhanced photocatalytic degradation of tetracycline hydrochloride over Au-doped BiOBr nanosheets under visible light irradiation

Bismuth(III) oxybromide (BiOBr) is a typical photocatalyst with a unique layered structure. However, the response of BiOBr to visible light is not strong enough for practical application. Moreover, the charge separation efficiency of BiOBr still needs to be improved. In this study, series of Au-doped BiOBr photocatalysts was prepared through a facile one-step hydrothermal method. The as-prepared Au0.3-BiOBr nanosheets exhibited an excellent electrochemical performance. The charge separation efficiency of Au0.3-BiOBr nanosheets was enhanced by 18.5 times compared with that of BiOBr. The intrinsic photocatalytic activity of Au0.3-BiOBr nanosheets in the degradation of tetracycline hydrochloride was approximately twice higher than that of BiOBr under visible light irradiation. In addition, three pathways were identified for the photocatalytic degradation and mineralization of tetracycline hydrochloride, which involve four reactions: hydroxylation, demethylation, ring opening and mineralization. Accordingly, this study proposes a feasible and effective Au-doped BiOBr photocatalyst, and describes a promising strategy for the design and synthesis of high-performance photocatalysts.

Photochemical degradation of persistent organic pollutants (PCDD/FS, PCBS, PBDES, DDTS and HCB) in hexane and fish oil

This study has investigated the photochemical degradation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polybrominated diphenylethers (PBDEs) and some organochlorine pesticides, such as hexachlorobenzene (HCB) or dichloro-diphenyl-trichloroethane (DDT) in hexane under UV irradiation at 254 nm. All pollutants were completely degraded after 3.5 h of exposition to the UV light. Moreover, this technique was applied to remove persistent organic pollutants from fish oil, with eliminations of a 34% for PCDD/Fs, 53% for PCBs, 59% for HCB, 67% for PBDEs and 73% for DDTs after 12 h of exposition to the UV light (254 nm). Dioxin-like PCBs increased their concentration after the treatment, probably due to the dehalogenation of other more chlorinated congeners. The fatty acids analysis of the fish oil revealed that the most important ω-3 fatty acids -EPA and DHA-were degraded to 67 and 70% of their initial content respectively. For these reasons elimination of persistent organic pollutants with photochemical treatment has limited applications for oils with food-purposes. However, it still can be a useful technique for decontamination of industrial oils.