A recent advancement on nanomaterials for electrochemical sensing of sulfamethaoxole and its futuristic approach

Biochar derived carbonaceous material for various environmental applications: Systematic review

Biochar is the solid material produced from the carbonization of organic feedstock biomass. This material has several unique characteristics such as greater carbon content, good electrical conductivity, high stability and large surface area, which can be applied in several research areas such as generation of power and wastewater treatment. In connection with this, recently, the investigations on biochar significantly focus on the removal of toxic heavy metals since the biochar material is easily available and environmentally friendly. According to an environmental analytical device, biochar-derived carbonaceous material has been additionally applied to the synthesis of an effective, sensitive, and low-cost electrochemical sensor. Biochar with an assessment of electrochemical properties has engaged with different redox reactions in water. In this survey, electrochemical ways of behaving of biochar in light of the electrochemical structures were analytically compiled as well as the impact from biomass sources and manufacturing process including carbonization strategies, pre-treatment/changed techniques. This review emphasizes the various synthesis methods of biochar form organic feedstock, properties and different modulations of biochar for the bioremediation of heavy metals. This review study emphasizes the utilization of biochar as sensing platform and supercapacitor for electrode fabrication in electrochemical biosensor to enhance the remediation of toxic contaminants from water streams and by switching the less ecological traditional materials. Brief information on the techniques employed for packaging biochar as carbon electrode is summarized. Scope in the aspect of environmental concern of biochar, future challenges and prospects are proposed in detail.

Green synthesis of curcumin-silver nanoparticle and its modified electrode assisted amperometric sensor for the determination of paracetamol

Contamination of paracetamol, a primary analgesic was wide spread in the water system that affects the eco-system. High-dosage of paracetamol to humans cause organ damages and showed adverse effect. It is important to monitor the paracetamol concentration in environmental and human samples periodically. Conventional methods associated with chromatography is found to be high-cost, time consuming and requires high-end instrumentation, Herein, we investigated the role of curcumin during bio-synthesis of silver nanoparticles. The curcumin functionalized silver nanoparticles were further chemically modifying on the electrode surface and the resulting modified electrode was applied for electrocatalytic oxidation of paracetamol. The experimental finding proved that the modified electrode is capable of sensing paracetamol by applying oxidation potential 0.4 V. Both the synthesised material and modified electrode surface were characterized for its physic-chemical properties using spectroscopy and microscopy techniques. The HR-TEM, FESEM and AFM results showed that the distribution of nanoparticle with the size range from 25 to 70 nm and the UV-Vis and Raman spectrophotometer characterization confirms the coordination between SNP and curcumin. Under optimized condition, in 0.1 M NH₄Cl (pH 7) at the scan rate of 50 mVs^-1. The modified electrode enhanced the sensitivity towards the detection of paracetamol in trace level. The modified electrode is capable of sensing paracetamol in a linear range between 0.59 × 10^-6 and 342.1 × 10^-6 M, with LOD of 0.29 μM, and linear regression equation of y = 0.092x+502.6 with a correlation coefficient of R² = 0.996.

Static and dynamic analysis of sulfamethoxazole using GO/ZnO modified glassy carbon electrode by differential pulse voltammetry and amperometry techniques

Surface water contamination of sulfamethoxazole (SMX) has tremendously affected the ecosystem. A primary study was performed to develop an electrochemical sensor for the determination of SMX. Overcoming the demerit associated with the conventional techniques, an electrochemical method was developed using GO/ZnO nanocomposite modified electrode to detect SMX in 0.1 M phosphate buffer (pH-5.5) buffer solution. The GO, ZnO and GO/ZnO nanocomposite were prepared using modified Hummer's, precipitation and sonochemical methods, respectively. Physico-chemical properties of all the materials and its modified electrode were analysed. Comparison was made by studying the SMX sensing performance of electrodes modified with GO, ZnO and GO/ZnO nanocomposites. Out of which GO/ZnO nanocomposite exhibited excellent sensing performance with the concentration range from 0.10 × 10^-6 to 1.5 × 10^-6 M with the limit of detection (LOD) 28.9 nM. The parameters such as electrolyte, effect of pH, scan rate were optimized for effective sensing performance. From the optimized results 0.1 M phosphate buffer was found to be a suitable electrolyte and the pH 5.5 was found to be appropriate to sense SMX at the scan rate 50 mVs^-1. Under optimized condition, the Differential Pulse Voltammetry (DPV) and Amperometry techniques were adopted for electrochemical sensing of SMX under static and hydrodynamic condition. The developed method was successfully tested for real time analysis for the samples collected from waste water treatment plant.

Investigation of Nafion coated GO-ZnO nanocomposite behaviour for sulfamethoxazole detection using cyclic voltammetry

The electrochemical behavior of sulfamethoxazole (SMX) was investigated on the surface of the glassy carbon electrode with Nafion coated GO, ZnO, GO-ZnO nanocomposites using cyclic voltammetry (CV). The results of voltammetric studies exhibited a considerable increase in background current on SMX detection at nafion coated GO-ZnO nanocomposite GC electrodes. However, the adopted fabrication procedure for GC electrodes was reported previously but only difference is nafion was drop casted over the fabricated nanocomposite electrode. In order to investigate the electrochemical performance behavior of GO/GCE, ZnO/GCE, GO-ZnO/GCE, variation on ZnO amounts with Nafion coated and uncoated GO/GC electrodes were involved and it was analyzed using cyclic voltammetry in 5 mM K₂FeCN₆ using 0.1 M KCl solution electrolyte medium. In GO-ZnO/GC electrode, peak currents got reduced when compared with GO/GC electrode but their potential voltage difference (peak-to-peak) separation was increased. Similar results was observed for nafion coated GO-ZnO/GC electrode. On comparing the electrochemical process, the importance of nafion coated GO-ZnO nanocomposites were studied and proceeded with optimized amounts of modifier on the electrode surface for SMX detection. Thus Nf/GO-ZnO with different ZnO ratios performance showed significant response on determining SMX, resulting to progress as electrode sensor for health-care applications.

Development of lab-on-chip biosensor for the detection of toxic heavy metals: A review

Recently, a decrease in water availability and quality has been raised due to rapid industrialization, unsustainable agricultural activities and anthropogenic activities. Heavy metals are considered significant pollutants in the water environment, cause environmental hazards and health effects to humans. For monitoring water contaminants utilized different conventional techniques. Still, they have some drawbacks, such as cost expensive, ecological issues, and processing time, requiring technicians and researchers to operate them effectively. Biosensors have become reasonable devices for screening and identifying environmental contaminants because of their different benefits contrasted with other detecting techniques. This review summarizes the toxic effect of heavy metal and their source, occurrence. A detailed discussion is provided on the heavy metal recognition materials for detecting heavy metals in wastewater. Lab on chip (LOC) is an emerging micro-electrical mechanical system (MEMS) device that intakes liquid and makes it move through the micro-channels, to accomplish fast, cost-effective and profoundly sensitive analysis with significant yield. LOC also provided a discussion on numerous laboratory functions on a single platform. This article attempts to discuss the detection of heavy metals using lab on a chip by suitable recognition materials. Further, the design and fabrication mechanism and their recognition abilities of LOC were also reviewed. The review mainly focuses on the application of LOC biosensors, pros, and cons, and suggests a roadmap towards future development to enhance the practical use in pollutant monitoring.

Electrochemical sensing system for the analysis of emerging contaminants in aquatic environment: A review

This survey distinguishes understudied spaces of arising impurity research in wastewaters and the habitat, and suggests bearing for future checking. Thinking about the impeding effect of toxins on human wellbeing and biological system, their discovery in various media including water is fundamental. This review sums up and assesses the latest advances in the electrochemical detecting of emerging contaminants (ECs). This survey is expected to add to the advancement in electrochemical applications towards the ECs. Different electrochemical insightful procedures like Amperometry, Voltammetry has been examined in this overview. The improvement of cutting edge nanomaterial-based electrochemical sensors and biosensors for the discovery of drug compounds has accumulated monstrous consideration because of their benefits, like high affectability and selectivity, continuous observing, and convenience has been reviewed in this survey. This survey likewise features the diverse electrochemical treatment procedures accessible for the removal of ECs.