Recent developments in photocatalysis of industrial effluents ։ A review and example of phenolic compounds degradation

Advances in molecularly imprinted materials for selective adsorption of phenolic pollutants from the water environment: Synthesis, applications, and improvement

The application of molecularly imprinted material (MIM) is widely employed as a material for removing phenolic pollutants from the water environment, owing to its exceptional capacity for selective adsorption and high sensitivity. In this paper, the preparation principle, bonding types, and preparation methods of MIM have been comprehensively introduced. Meanwhile, according to the binding type of MIM with phenolic pollutants, three categories of hydroxyl bonding, hydroxyl carboxyl bonding, and hydroxyl nitro bonding were carried out to explain its application to phenolic pollutants. Strategies for addressing the challenges of selective instability, high regeneration costs, and template leakage in MIM applications were summarized. These strategies encompassed the introduction of superior carriers, enhancements in preparation processes, and the utilization of molecular dynamics simulation-assisted technology. Finally, the prospects in the three aspects of material preparation, process coupling, and recycling. In summary, this paper has demonstrated the potential of utilizing MIM for the selective treatment of phenolic pollutants from the water environment.

Attuning doped ZnO-based composites for an effective light-driven mineralization of pharmaceuticals via PMS activation

Water treatment technologies need to go beyond the current control of organic contaminants and ensure access to potable water. However, existing methods are still costly and often inadequate. In this context, novel catalysts that improve the mineralization degree of a wider range of pharmaceuticals through more benign and less consuming methodologies are highly sought after. ZnO, especially when doped, is a well-known semiconductor that also excels in the photocatalytic removal of persistent organic pollutants. In this study, we investigated the effect of doping ZnO nanoparticles with either copper, gallium or indium on the structure, morphology, photophysical properties and photocatalytic mineralization of pharmaceuticals. Their architecture was further improved through the fabrication of composites, pairing the best performing doped ZnO with either BaFe12O19 or nickel nanoparticles. Their suitability was tested on a complex 60-ppm multi-pollutant solution (tetracycline, levofloxacin and lansoprazole). The activation strategy combined photocatalysis with peroxymonosulfate (PMS) as an environmentally friendly source of highly oxidative sulfate radicals. The alliance of doped ZnO and BaFe12O19 was particularly successful, resulting in magnetic microcroquette-shaped composites with excellent inter-component synergy. In fact, indium outperformed the other proposed metal dopants, exceeding 97% mineralization after 1 h and achieving complete elimination after 3 h. All composites excelled in terms of reusability, with no catalytic loss after 10 consecutive cycles and minimal leakage of metal ions, highlighting their applicability in water remediation.

A novel laccase-like Cu-MOF for colorimetric differentiation and detection of phenolic compounds

The development of convenient, fast, and cost-effective methods for differentiating and detecting common organic pollutant phenols has become increasingly important for environmental and food safety. In this study, a copper metal-organic framework (Cu-MOF) with flower-like morphology was synthesized using 2-methylimidazole (2-MI) as ligands. The Cu-MOF was designed to mimic the natural laccase active site and proved demonstrated excellent mimicry of enzyme-like activity. Leveraging the superior properties of the constructed Cu-MOF, a colorimetric method was developed for analyzing phenolic compounds. This method exhibited a wide linear range from 0.1 to 100 μM with a low limit of detection (LOD) of 0.068 μM. Besides, by employing principal component analysis (PCA), nine kinds of phenols was successfully distinguished and identified. Moreover, the combination of smartphones with RGB profiling enabled real-time, quantitative, and high-throughput detection of phenols. Therefore, this work presents a paradigm and offers guidance for the differentiation and detection of phenolic pollutants in the environment.

A Comprehensive Review on Modification of Titanium Dioxide-Based Catalysts in Advanced Oxidation Processes for Water Treatment

It has become necessary to develop effective strategies to prevent and reduce water pollution as a result of the increase in dangerous pollutants in water reservoirs. Consequently, there is a need to design new catalyst materials to promote the efficiency of advanced oxidation processes (AOPs) in the field of wastewater treatment plant to ensure the mineralization of trace organic contaminants. A notable approach gaining attention involves the coupling of sulfate radicals-based AOPs to photocatalysis or electrocatalysis processes, aiming to achieve the complete removal of refractory contaminants into water and carbon dioxide. Titanium dioxide as metal oxide has received great attention for its catalytic application in water purification. TiO2 catalysts offer a multitude of advantages in AOPs. They are characterized by their high photocatalytic activity under both ultraviolet and visible light, making them environmentally friendly due to the absence of toxic byproducts during oxidation. Their versatility is remarkable, finding utility in various AOPs, from photocatalysis to photo-Fenton processes. TiO2's durability ensures long-lasting catalytic activity, which is crucial for continuous treatment processes, and their cost-effectiveness is particularly advantageous. Furthermore, their chemical stability allows it to withstand varying pH conditions. However, the large band gap energy and low electrical conductivity hinder the catalytic reaction effectiveness. This review aims to examine various approaches to enhance the catalytic performance of titanium dioxide, with the objective of enabling more efficient water purification methods.

In Situ Monitoring of the Polymerization Kinetics of Organic Pollutants during Persulfate-Based Advanced Oxidation Processes Using Plasmonic Colorimetry

Using sulfate radicals to initiate polymer production in persulfate-based advanced oxidation processes (AOPs) is an emerging strategy for organics removal. However, our understanding of this process remains limited due to a dearth of efficient methods for in situ and real time monitoring of polymerization kinetics. This study leverages plasmonic colorimetry to monitor the polymerization kinetics of an array of aromatic pollutants in the presence of sulfate radicals. We observed that the formation of polymer shells on the surfaces of gold nanoparticles (AuNPs) led to an increase and red shift in their localized surface plasmon resonance (LSPR) band as a result of an increased refractive index surrounding the AuNP surfaces. This observation aligns with Mie theory simulations and transmission electron microscopy-electron energy loss spectroscopy characterizations. Our study demonstrated that the polymerization kinetics exhibits a significant reliance on the electrophilicity and quantity of benzene rings, the concentration of aromatic pollutants, and the dosage of oxidants. In addition, we found that changes in LSPR band wavelength fit well into a pseudo-first-order kinetic model, providing a comprehensive and quantitative insight into the polymerization kinetics involving diverse organic compounds. This technique holds the potential for optimizing AOP-based water treatment by facilitating the polymerization of aromatic pollutants.

A Series of Polymer-Supported Polyoxometalates as Heterogeneous Photocatalysts for Degradation of Organic Dye

Photocatalytic degradation technology has developed rapidly in the treatment of organic pollutants due to its high efficiency, mild reaction conditions and easy control. In this paper, a series of heterogeneous photocatalysts, BWZ-en-R (BWZ = [BW₁₁Z(H₂O)O₃₉]^7-, Z = Zn, Cd, Mn, en = ethylenediamine, R = Merrifield resin), were prepared by using ethanediamine as a linker to immobilize Keggin-type transition elements substituting tungstoborates on Merrifield resin and characterized by Fourier transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The photocatalytic properties of BWZ-en-R (Z = Zn, Cd, Mn) for the degradation of methyl red (MR) were investigated. The results show that the BWZ-en-R (Z = Zn, Cd, Mn) photocatalysts exhibited high photodegradation ability for MR under the irradiation of ultraviolet light, and were easily separated from the reaction media. The maximum degradation rate (%) of MR (40 mL, 25 μM, pH = 2) reached 96.4% for the BWMn-en-R photocatalyst (40 mg) after being irradiated for 30 min, making this a promising photocatalyst candidate for dye degradation. Moreover, the influences of some factors, such as the Z-substituted elements in the BWZ, the BWZ-en-R dosage and the MR initial concentration, on the photocatalytic degradation rate of MR were also examined.

CdS nanocrystallites sensitized ZnO nanosheets for visible light induced sonophotocatalytic/photocatalytic degradation of tetracycline: From experimental results to a generalized model based on machine learning methods

CdS/ZnO nanosheets heterostructures ((x)CdS/ZNs) with different mole ratios of Cd/Zn ((x) = 0.2, 0.4, and 0.6) were synthesized by the impregnation-calcination method. PXRD patterns showed that the (100) diffraction of ZNs was the most significant in the (x)CdS/ZNs heterostructures, and it confirmed that CdS nanoparticles (in cubic phase) occupied the (101) and (002) crystal facets of ZNs with hexagonal wurtzite crystal phase. UV-Vis DRS results indicated that CdS nanoparticles decreased the band gap energy of ZNs (2.80-2.11 eV) and extended the photoactivity of ZNs to the visible light region. The vibrations of ZNs were not observed clearly in the Raman spectra of (x)CdS/ZNs due to the extensive coverage of CdS nanoparticles shielding the deeper-laying ZNs from Raman response. The photocurrent of (0.4) CdS/ZNs photoelectrode reached 33 μA, about 82 times higher than that for ZNs (0.4 μA, 0.1 V vs Ag/AgCl). The formation of an n-n junction at the (0.4) CdS/ZNs reduced the recombination of electron-hole pairs and increased the degradation performance of the as-prepared (0.4) CdS/ZNs heterostructure. The highest percentage removal of tetracycline (TC) in the sonophotocatalytic/photocatalytic processes was obtained by (0.4) CdS/ZNs under visible light. The quenching tests showed that O₂^•-, h⁺, and OH^• were the main active species in the degradation process. The degradation percentage decreased negligibly in the sonophotocatalytic (84%-79%) compared to the photocatalytic (90%-72%) process after four re-using runs due to the presence of ultrasonic waves. For the estimation of degradation behavior, two machine learning methods were applied. The comparison between the ANN and GBRT models evidenced that both models had high prediction accuracy and could be used for predicting and fitting the experimental data of the %removal of TC. The excellent sonophotocatalytic/photocatalytic performance and stability of the fabricated (x)CdS/ZNs catalysts made them promising candidates for wastewater purification.

Recent advances in advanced oxidation processes (AOPs) for the treatment of nitro- and alkyl-phenolic compounds

The presence of phenolic compounds in the aquatic environment has posed severe risks due to their toxicity. Among the phenolic families, nitro- and alkyl-phenolic compounds have been categorized as precedence contaminants by the United States Environmental Protection Agency (US EPA). Therefore, efficient treatment methods for wastewater containing nitro- and alkyl-phenolic compounds are urgently needed. Due to the advantages of creating reactive species and generating efficient degradation of hazardous contaminants in wastewater, advanced oxidation processes (AOPs) are well-known in the field of treating toxic contaminants. In this review paper, the recent directions in AOPs, catalysts, mechanisms, and kinetics of AOPs are comprehensively reviewed. Furthermore, the conclusion summarizes the research findings, future prospects, and opportunities for this study. The main direction of AOPs lies on the optimization of catalyst and operating parameters, with industrial applications remain as the main challenge. This review article is expected to present a summary and in-depth understanding of AOPs development; and thus, inspiring scientists to accelerate the evolution of AOPs in industrial applications.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Direct One-Step Seedless Hydrothermal Growth of ZnO Nanostructures on Zinc: Primary Study for Photocatalytic Roof Development for Rainwater Purification

To shift towards the greener city, photocatalytic urban infrastructures have emerged as a promising solution for pollution remediation. To reach this goal, the large bandgap semiconductors, such as nontoxic Zinc Oxide (ZnO), already proved their excellent photocatalytic performances. However, integrating and developing cost-effective and greener photocatalytic surfaces with an easily scaled-up synthesis method and without energy and chemical product overconsumption is still challenging. Therefore, this work proposes to develop a depolluting Zinc (Zn) roof covered by ZnO nanostructures (NSs) using a one-step seedless hydrothermal growth method in 2 h. The feasibility of this synthesis was firstly studied on small areas of Zn (1.25 cm2) before being scaled up to medium-sized areas (25 cm2). The efficiency of this functionalization route for ZnO NSs grown without seed layer was attributed to the presence of Zn2+ sites and the native oxide film on the Zn surface. Their photocatalytic efficiency was demonstrated by removing in less than 3 h the Methylene Blue (MB) and Acid Red 14 (AR14) in both DI water and rainwater under UV-light. Promising results were also recorded under solar light. Therefore, the photocatalytic Zn roof functionalized by ZnO NSs is a promising route for rainwater purification by photocatalysis.

Titanium-Porphyrin Metal-Organic Frameworks as Visible-Light-Driven Catalysts for Highly Efficient Sonophotocatalytic Reduction of Cr(VI)

In this work, we synthesized and characterized four titanium-porphyrin metal-organic frameworks (MOFs) [DGIST-1(M), M = Co(II), Fe(III), Zn(II), and H₂] and used them as visible-light-driven catalysts for sonophotocatalytic Cr(VI) reduction. DGIST-1(M) exhibited open-framework, broad light absorption stemmed from ligand and sensitive photocurrent responses owing to the integration of one-dimensional Ti-oxo chains and 4-connected conjugated TCPP ligand (TCPP = tetrakis(4-carboxyphenyl)-porphyrin). DGIST-1(M) presented efficient reduction of Cr(VI) to Cr(III) in aqueous solution when used as sonophotocatalytic catalysts. The average reduction rates upon Cr(VI) were 0.920, 0.476, 0.377, and 0.194 mg·L^-1·min^-1 for DGIST-1(H₂), DGIST-1(Zn), DGIST-1(Co), and DGIST-1(Fe), which are 1.15-2.45 times higher than those in photocatalysis. Sonophotocatalytic experiments and electron paramagnetic resonance measurement proved that Ti-oxo chain units and porphyrin ligand in the structures of DGIST-1(M) existed as catalytic active centers for sonophotocatalytic reduction of Cr(VI). Photoluminescence and UV absorption spectra revealed that the unity of photocatalysis and sonochemistry strengthened the migration of photogenerated electrons from DGIST-1(M) to Cr(VI), which improved the activities of catalysts. This study suggested that the association of titanium-porphyrin MOFs and sonophotocatalytic technology is an impactful program for enhancing MOF-based photocatalytic systems.

Efficient Adsorption-Photocatalytic Removal of Tetracycline Hydrochloride over Octahedral MnS

To disclose the effect of crystal plane on the adsorption-photocatalytic activity of MnS, octahedral MnS was prepared via the hydrothermal route to enhance the adsorption and photocatalytic efficiencies of tetracycline hydrochloride (TCH) in visible light region. The optimal MnS treated at 433 K for 16 h could remove 94.83% TCH solution of 260 mg L⁻¹ within 180 min, and its adsorption-photocatalytic efficiency declined to 89.68% after five cycles. Its excellent adsorption-photocatalytic activity and durability were ascribed to the sufficient vacant sites of octahedral structure for TCH adsorption and the feasible band-gap structure for visible-light response. In addition, the band gap structure (1.37 eV) of MnS with a conduction band value of −0.58 eV and a valence band value of 0.79 eV was favorable for the generation of O²⁻, while unsuitable for the formation of OH. Hence, octahedral MnS was a potential material for the removal of antibiotics from wastewater.