Advancements in visible light responsive MOF composites for photocatalytic decontamination of textile wastewater: A review

Bimetallic MOF-derived three-dimensional nanoflowers PdCoOx as peroxidase mimic activity for determining total antioxidant capacity

Bimetallic MOF derivatives have shown excellent performance as nano-enzymes in the field of catalysis. Herein, PdCo oxide nanoflowers with three-dimensional flower were prepared by a simple pyrolysis method on a precursor of bimetallic PdCo-MOF. PdCoOx showed excellent peroxidase mimic activity, which could significantly promote the oxidation of TMB by H2O2. Compared with CoOx, the peroxidase mimic activity of the optimized PdCoOx-300 increased by 2.41-fold. PdCoOx-300 has high affinity for TMB and H2O2 with Km values of 0.16 mM and 2.11 mM, which are only 57.03% and 36.87% of HRP, respectively. The highly specific peroxidase mimic activity is conducive to the sensitive detection of H2O2, glucose and ascorbic acid with limit of detection of 10, 100 and 10 nM, respectively. Furthermore, the total antioxidant capacity in the actual beverage samples was conducted, which showed good anti-interference ability and recovery rate.

An innovative triple interface reinforced photocatalytic system based on BiOCl/BaTiO3@Co-BDC-MOF composite for the simultaneous detoxification of Cr(VI) and sulfamethoxazole

The development of effective photocatalysts for the reduction of Cr(VI) and the degradation of antibiotics remains a challenge. The present work reports the development of a novel heterojunction composite material, BiOCl/BaTiO3@Co-BDC-MOF (BOC/BTO@Co-MOF), based on solvothermal techniques. To characterize the surface and bulk features of the material, techniques such as FE-SEM, HR-TEM, BET/BJH, XPS, FT-IR, p-XRD, and UV-Vis-DRS were used. Based on the results, the BiOCl/BaTiO3 nanocomposites are uniformly dispersed on the rod-shaped Co-BDC MOF, resulting in a layered texture on the surface. A further advantage of the composite structure is the strong interfacial enhancement facilitating the separation of photoexcited electron-hole pairs. Also, compared to its pristine counterparts, the heterostructure material exhibited excellent surface area and pore properties. The photocatalytic efficiency towards reduction and degradation of Cr(VI)/SMX pollutants were evaluated by optimizing various analytical parameters, such as pH, catalytic loading concentrations, analyte concentration, and scavenger role. The specially designed BOC/BTO@Co-MOF composite achieved a 96.5% Cr(VI) reduction and 98.2% SMX degradation under 60.0-90.0 min of visible light illumination at pH 3.0. This material is highly reusable and has a six-time recycling potential. The findings of this study contribute to a better understanding of the efficient decontamination of inorganic and organic pollutants in water purification systems.

Construction of Pillared-Layer Metal-Organic Frameworks as an All-Visible-Light Switchable Photocatalyst for Aqueous Cr(VI) Reduction

Recently, two-dimensional metal-organic frameworks that are photoactive have shown great potential for efficiently converting solar energy into chemical energy. In this work, we successfully synthesized and designed two M2-MOFs ([Cu(L1)((CH3)2NH)]n (Cu-MOF) and [Zn(L1)(CH3)2NH)]n (Zn-MOF), H2L1 = 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid). Structural analysis suggests that the five-coordinated M(II) ion is surrounded by four oxygen ions from two ligands and one nitrogen atom from one dimethylamine molecule. The ligand spacer acts as a bridge between two SBUs and forms a 2D layer with rhomboid windows. These moieties are arranged in a staggered ABAB pattern, which likely aids in exfoliation. The UV-vis diffuse reflectance spectra (DRS) test shows that when the metal center in the MOF framework is replaced with Cu(II) ions, the light absorption range covers 200-1100 nm, which is much larger than the light absorption range of Zn-MOF. Moreover, the photoelectric current, electrochemical impedance spectra (EIS), and Mott-Schottky tests all indicate that Cu-MOF has better photoelectric properties. When applied to the photocatalytic reduction of Cr(VI), Cu-MOF and Zn-MOF can completely reduce Cr(VI) within 100 min under 450 nm LED light irradiation. Under sunlight irradiation, Cu-MOF can completely reduce Cr(VI) within 40 min, achieving the removal of Cr(VI) ions, which is much faster than the rate of Cr(VI) removal by Zn-MOF.

Enhanced water stability and catalytic activity of Fe-based metal-organic frameworks with co-ligands for 2,4-dichlorophenol degradation

Fe-based metal-organic frameworks (MOFs) have good photocatalytic performance, environmental friendliness, low cost, and abundance. However, their applications are limited by low water stability, particularly in the presence of light irradiation and oxidizing agents. In this study, we present a MIL-53(Fe)-based MOF using 1,4-naphthalene dicarboxylic (1,4-NDC) and 1,4-benzenedicarboxylic (H2BDC) acid co-ligands, denoted MIL-53(Fe)-Nx, where Nx represents the ratio of 1,4-NDC. This MOF exhibits high water stability and good photocatalytic activity because of the hydrophobicity of naphthalene. The removal and mineralization rates for 100 mg/L 2,4-dichlorophenol reached 100% and 22%, respectively, within 60 min. After three cycles of use, the Fe leached into the solution from the catalysts was significantly lower than the maximum permissible limit indicated in the European Union standard. Of note, 1,4-NDC can be used to make a rigid MOF, thereby improving the crystallinity, porosity, and hydrophobicity of the resultant materials. It also significantly reduced the bandgap energy and improved the charge separation efficiency of the catalysts. This study provides a route to enhance the water stability of Fe-based MOFs via a mixed-ligand strategy to expand their applications in pollutant control.

A review on development and modification strategies of MOFs Z-scheme heterojunction for photocatalytic wastewater treatment, water splitting, and DFT calculations

Increasing water pollution and decreasing energy reserves have emerged as growing concerns for the environment. These pollution are due to the dangerous effects of numerous pollutants on humans and aquatic organisms, such as hydrocarbons, biphenyls, pesticides, dyes, pharmaceuticals, and metal ions. On the other hand, the need for a clean environment, finding alternatives to fossil and renewable fuels is very important. Hydrogen (H2) is regarded as a viable and promising substitute for fossil fuels, and a range of methodologies have been devised to generate this particular source of energy. Metal-organic frameworks (MOFs) are a new generation of nanoporous coordination polymers whose crystal structure is composed of the juxtaposition of organic and inorganic constituent units. Due to their flexible nature, regular structure, and high surface area, these materials have attracted much attention for removing various pollutants from water and wastewater, and water splitting. MOFs Z-scheme heterojunctions have been identified as an economical and eco-friendly method for eliminating pollutants from wastewater systems, and producing H2. Their low-cost synthesis and unique properties increase their application in various energy and environment fields. The heterojunctions possess diverse properties, such as exceptional surface area, making them ideal for degradation and separation. The development and formulation of Z-scheme heterojunctions photocatalytic systems using MOFs, which possess stable and potent redox capability, have emerged as a successful approach for addressing environmental pollution and energy shortages in recent times. Through the utilization of the benefits offered by MOFs Z-scheme heterojunctions photocatalysts, such as efficient separation and migration of charge carriers, extensive spectrum of light absorption, among other advantages, notable enhancements can be attained. This review encompasses the synthesis techniques, structure, and properties of MOFs Z-scheme heterojunctions, and their extensive use in treating various wastewaters, including dyes, pharmaceuticals, and heavy metals, and water splitting. Also, it provides an overview of the mechanisms, pathways, and various theoretical and practical aspects for MOFs Z-scheme heterojunctions. Finally, it thoroughly assesses existing challenges and suggests further research on the promising applications of MOFs Z-scheme in industrial-scale wastewater treatment.

Effect of pyrolysis temperature on characteristics and chloramphenicol adsorption performance of NH2-MIL-53(Al)-derived amine-functionalized porous carbons

Several activities such as aquaculture, human and feedstock therapies can directly release antibiotics into water. Due to high stability, low hydrolysis and non-biodegradation, they can accumulate in the aqueous environment and transport to aquatic species. Here, we synthesized amine-functionalized porous carbons (ANC) by a direct-pyrolysis process of NH2-MIL-53(Al) as a sacrificial template at between 600 and 900 °C and utilized them to eliminate chloramphenicol antibiotic from water. The NH2-MIL-53(Al)-derived porous carbons obtained high surface areas (304.7-1600 m2 g-1) and chloramphenicol adsorption capacities (148.3-261.5 mg g-1). Several factors such as hydrogen bonding, Yoshida hydrogen bonding, and π-π interaction, hydrophobic interaction possibly controlled adsorption mechanisms. The ANC800 could be reused four cycles along with high stability in structure. As a result, NH2-MIL-53(Al)-derived porous carbons are recommended as recyclable and efficient adsorbents to the treatment of antibiotics in water.

Imine-Decorated Copper-Based Metal-Organic Framework for the Photodegradation of Methylene Blue

A low cost imine-decorated linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid was utilized for the preparation of copper-based metal-organic framework (MOF) denoted as Cu-L via a solvothermal technique. The synthesized MOF material has been fully characterized by different analytical techniques such as Fourier-transform infrared (FT-IR) spectroscopy, powder X-Ray diffraction (PXRD), scanning electron microscopy (SEM), energy dispersive X-Ray spectroscopy (EDX), nitrogen adsorption-desorption isotherm analysis, and thermogravimetric analysis (TGA). It has been found that the coordination of Cu2+ with L considerably reduced the band gap of the L of nearly about 1 eV, which is approximately 26% decline in total. Notably, a narrow band gap of the photocatalyst is an essential requirement for the proficient photodegradation of organic contaminants. An excellent optical properties and narrow band gap of (2.8 eV) of Cu-L ensure their suitability as a photocatalyst for the degradation of methylene blue (MB) dye. In the presence of Cu-L photocatalyst, 84.22% degradation of MB dye was observed after 150 min under sunlight exposure. It is the first time that imine-functionalized MOF was utilized for the degradation of MB dye under sunlight irradiation. For understanding the photodegradation of MB dye by the Cu-L photocatalyst, all the plausible mechanistic studies have been carried out in detail. Both theoretical (with the help of density functional theory (DFT) calculations) as well as experimental studies have been conducted to justify the possible mechanisms for the photodegradation of MB dye by Cu-L. The current work may open a new opportunity to construct a cheap MOF-based photocatalysts for fast degradation of dye contaminants.

Novel Cu(II)-based metal-organic framework STAM-1 as a sulfur host for Li-S batteries

Due to the increasing demand for energy storage devices, the development of high-energy density batteries is very necessary. Lithium-sulfur (Li-S) batteries have gained wide interest due to their particularly high-energy density. However, even this type of battery still needs to be improved. Novel Cu(II)-based metal-organic framework STAM-1 was synthesized and applied as a composite cathode material as a sulfur host in the lithium-sulfur battery with the aim of regulating the redox kinetics of sulfur cathodes. Prepared STAM-1 was characterized by infrared spectroscopy at ambient temperature and after in-situ heating, elemental analysis, X-ray photoelectron spectroscopy and textural properties by nitrogen and carbon dioxide adsorption at - 196 and 0 °C, respectively. Results of the SEM showed that crystals of STAM-1 created a flake-like structure, the surface was uniform and porous enough for electrolyte and sulfur infiltration. Subsequently, STAM-1 was used as a sulfur carrier in the cathode construction of a Li-S battery. The charge/discharge measurements of the novel S/STAM-1/Super P/PVDF cathode demonstrated the initial discharge capacity of 452 mAh g-1 at 0.5 C and after 100 cycles of 430 mAh g-1, with Coulombic efficiency of 97% during the whole cycling procedure at 0.5 C. It was confirmed that novel Cu-based STAM-1 flakes could accelerate the conversion of sulfur species in the cathode material.

The luminescent principle and sensing mechanism of metal-organic framework for bioanalysis and bioimaging

Metal-organic frameworks (MOFs) porous material have obtained more and more attention during the past decade. Among various MOFs materials, luminescent MOFs with specific chemical characteristics and excellent optical properties have been regarded as promising candidates in the research of cancer biomarkers detection and bioimaging. Therefore, the latest advances and the principal biosensing and imaging strategies based on the luminescent MOFs were discussed in this review. The effective synthesis methods of luminescent MOFs were emphasized firstly. Subsequently, the luminescent principle of MOFs has been summarized. Furthermore, the luminescent MOF-based sensing mechanisms have been highlighted to provide insights into the design of biosensors. The designability of LMOFs was suitable for different needs of biorecognition, detection, and imaging. Typical examples of luminescent MOF in the various cancer biomarkers detection and bioimaging were emphatically introduced. Finally, the future outlooks and challenges of luminescent MOF-based biosensing systems were proposed for clinical cancer diagnosis.

Decoration of viscose fibers with silver nanoparticle-based titanium-organic framework for use in environmental applications

To effectively remove pharmaceuticals, nitroaromatic compounds, and dyes from wastewater, an efficient multifunctional material was created based on silver nanoparticles (Ag) and MIL-125-NH2 (MOF) immobilized on viscose fibers (VF) as a support substrate. Firstly, silver nanoparticles (Ag) were immobilized on the surface of viscose fibers (VF) via in situ synthesis using trisodium citrate (TSC) as a reducing agent to create (VF-Ag). Then, VF and VF-Ag were decorated with the titanium metal-organic framework MIL-125-NH2 (MOF) to create VF-MOF and VF-Ag-MOF. The influence of VF-Ag, VF-MOF, and VF-Ag-MOF on the sonocatalytic or sonophotocatalytic degradation of sulfa drugs was investigated. The results show that VF-Ag-MOF showed excellent sonocatalytic and sonophotocatalytic activity towards the degradation of sulfa drugs compared to VF-Ag and VF-MOF. Furthermore, sonophotodegradation showed a dramatic enhancement in the efficiency of degradation of sulfa drugs compared to sonodegradation. The sonophotodegradation degradation percentage of sulfanilamide, sulfadiazine, and sulfamethazine drugs in the presence of VF-Ag-MOF was 65, 90, and 95 after 45 min of ultrasonic and visible light irradiation. The catalytic activity of VF-Ag, VF-MOF, and VF-Ag-MOF was evaluated through the conversion of p-nitrophenol (4-NP) to p-aminophenol (4-AP). The results demonstrate that VF-Ag-MOF had the highest catalytic activity, followed by VF-Ag and VF-MOF. The conversion percentage of 4-NP to 4-AP was 69%. The catalytic or photocatalytic effects of VF-Ag, VF-MOF, and VF-Ag-MOF on the elimination of methylene blue (MB) dye were investigated. The results demonstrate that VF-Ag-MOF showed high efficiency in removing the MB dye through the reduction (65%) or photodegradation (71%) after 60 min. VF-Ag-MOF composites structure-activity relationships represent that doping within silver NPs enhanced the photocatalytic activity of MIL-125-NH2, which could be explained as follows: (i) Due to the formation of a Schottky barrier at the junction between MIL-125-NH2 and Ag NPs, the photogenerated electrons in the conduction band of MIL-125-NH2 were supposed to be quickly transferred to the valence band of the Ag NPs, and subsequently, the electrons were transferred to the conduction band of Ag NPs. This considerable electron transferring process, which is reported as Z scheme heterojunction, can efficiently suppress the recombination of electron/hole pairs in VF-Ag-MIL-125-NH2 composites. (ii) Sufficient separation between the photogenerated charge carriers (holes and electrons) and avoiding their recombination enhanced the photocatalytic activity of composites.

Effective photocatalytic degradation of amphotericin B and naproxen from aqueous solutions using carbon quantum dots combined in MIL-88B(Fe) under visible light

A photocatalytic adsorbent composed of carbon dots (CD) embedded in a metal-organic framework (MOF) of MIL-88 B(Fe) was prepared by solvothermal technique. The synthesized CD@MIL-88 B(Fe) was characterized by different X-ray-based microscopic and spectroscopic methods, as well as electrochemical impedance spectroscopy, UV-Vis, FT-IR, DRS, TGA, and photoluminescence (PL) analysis. The prepared adsorbent showed a remarkable photocatalytic activity for eliminating amphotericin B (AmB) and naproxen (Nap) from aqueous solutions under visible light, reaching up to 92% and 90% removal, respectively, with an RSD value of around 5%. The parameters affecting the degradation process of pharmaceuticals were investigated. The optimal conditions for the degradation process were determined, including pH values (3 and 4 for AmB and Nap), photocatalyst concentration (0.2 g L-1), and H2O2 concentration (40-50 mM). Reactive oxidative species were also identified (·OH, ·O2) by examination of different scavengers. The adsorption isotherm and kinetic studies reveal that the synthesized photocatalyst exhibits dual functionality as an effective adsorbent (with maximum adsorption capacities of 42.5 and 121.5 mg g-1 for AmB and Nap) and a photocatalytic agent for removal purposes.

Graphene-based photocatalysts for degradation of organic pollution

Compared with the traditional wastewater treatment technology, semiconductor photocatalysis is a rapidly emerging environment-friendly and efficient Advanced Oxidation Process for degradation of refractory organic contaminants. Single-component semiconductor photocatalysts exhibit poor photocatalytic performance and cannot meet the requirements of wastewater treatment. The combination of semiconductor photocatalysts and Graphene can effectively improve the photocatalytic activity and stability of semiconductor photocatalysts. This review focuses on the synergistic effect of several types of semiconductors with Graphene for photocatalytic degradation of organic pollutants. After a brief introduction of the photodegradation mechanism of semiconductor materials and the basic description of Graphene, the synthesis, characterization and degradation performance of various Graphene-based semiconductor photocatalysts are emphatically introduced.

Recent Advances in Metal-Organic Framework (MOF)-Based Photocatalysts: Design Strategies and Applications in Heavy Metal Control

The heavy metal contamination of water systems has become a major environmental concern worldwide. Photocatalysis using metal-organic frameworks (MOFs) has emerged as a promising approach for heavy metal remediation, owing to the ability of MOFs to fully degrade contaminants through redox reactions that are driven by photogenerated charge carriers. This review provides a comprehensive analysis of recent developments in MOF-based photocatalysts for removing and decontaminating heavy metals from water. The tunable nature of MOFs allows the rational design of composition and features to enhance light harvesting, charge separation, pollutant absorptivity, and photocatalytic activities. Key strategies employed include metal coordination tuning, organic ligand functionalization, heteroatom doping, plasmonic nanoparticle incorporation, defect engineering, and morphology control. The mechanisms involved in the interactions between MOF photocatalysts and heavy metal contaminants are discussed, including light absorption, charge carrier separation, metal ion adsorption, and photocatalytic redox reactions. The review highlights diverse applications of MOF photocatalysts in treating heavy metals such as lead, mercury, chromium, cadmium, silver, arsenic, nickel, etc. in water remediation. Kinetic modeling provides vital insights into the complex interplay between coupled processes such as adsorption and photocatalytic degradation that influence treatment efficiency. Life cycle assessment (LCA) is also crucial for evaluating the sustainability of MOF-based technologies. By elucidating the latest advances, current challenges, and future opportunities, this review provides insights into the potential of MOF-based photocatalysts as a sustainable technology for addressing the critical issue of heavy metal pollution in water systems. Ongoing efforts are needed to address the issues of stability, recyclability, scalable synthesis, and practical reactor engineering.

Advantages of Bimetallic Organic Frameworks in the Adsorption, Catalysis and Detection for Water Contaminants

The binary metal organic framework (MOF) is composed of two heterometallic ions bonded to an organic ligand. Compared with monometallic MOFs, bimetallic MOFs have greatly improved in terms of structure, porosity, active site, adsorption, selectivity, and stability, which has attracted wide attention. At present, many effective strategies have been designed for the synthesis of bimetallic MOF-based nanomaterials with specific morphology, structure, and function. The results show that bimetallic MOF-based nanocomposites could achieve multiple synergistic effects, which will greatly improve their research in the fields of adsorption, catalysis, energy storage, sensing, and so on. In this review, the main preparation methods of bimetallic MOFs-based materials are summarized, with emphasis on their applications in adsorption, catalysis, and detection of target pollutants in water environments, and perspectives on the future development of bimetallic MOFs-based nanomaterials in the field of water are presented.

Core-Shell Composite MIL-101(Cr)@TiO2 for Organic Dye Pollutants and Vehicle Exhaust

MIL-101(Cr)@TiO₂ core-shell composite material was synthesized via the hydrothermal method, where MIL-101(Cr) served as the core and TiO₂ acted as the shell. SEM results revealed that the metal-organic framework core effectively prevented the aggregation of TiO₂ nanoparticles and facilitated their dispersion. Characterization techniques such as XRD, XPS, and TGA were utilized to confirm the successful loading of TiO₂ onto MIL-101(Cr) and its excellent thermal stability. MIL-101(Cr)@TiO₂ was employed in photocatalytic degradation of dye pollutants and vehicle exhaust, and the potential degradation mechanisms were investigated in detail. The results showed that MIL-101(Cr)@TiO₂ exhibited excellent photocatalytic degradation performance towards dye pollutants, with degradation efficiencies of 91.7% and 67.8% achieved for MB and RhB, respectively, under visible light irradiation for 90 min. Furthermore, the photocatalytic degradation of automobile exhaust revealed that the MIL-101(Cr)@TiO₂ composite material also exhibited degradation effects on NO_x, CO, and HC. The degradation efficiency for NO reached 24.2%, indicating its broader applicability.

Ag3PO4-anchored La2Ti2O7 nanorod as a Z-Scheme heterostructure composite with boosted photogenerated carrier separation and enhanced photocatalytic performance under natural sunlight

Developing wide spectra-responsive photocatalysts has attracted considerable attention in the photocatalytic technology to achieve excellent catalytic activity. Ag₃PO₄, with strong response to light spectra shorter than 530 nm, shows extremely outstanding photocatalytic oxidation ability. Unfortunately, the photocorrosion of Ag₃PO₄ is still the biggest obstacle to its application. Herein, the La₂Ti₂O₇ nanorod was used to anchor Ag₃PO₄ nanoparticles in this study, and a novel Z-Scheme La₂Ti₂O₇/Ag₃PO₄ heterostructure composite was constructed. Remarkably, the composite showed strong responsive to most of the spectra in natural sunlight. The Ag⁰ formed in-situ acted as the recombination center of photogenerated carriers, which promoted their efficient separation and contributed to the improved photocatalytic performance of the heterostructure. When the mass ratio of Ag₃PO₄ in the La₂Ti₂O₇/Ag₃PO₄ catalyst was 50%, the degradation rate constant of Rhodamine B (RhB), methyl orange (MO), chloroquine phosphate (CQ), tetracycline (TC), and phenol under natural sunlight irradiation were 0.5923, 0.4463, 0.1399, 0.0493, and 0.0096 min^-1, respectively. Furthermore, the photocorrosion of the composite was greatly inhibited, 76.49% of CQ and 83.96% of RhB were still degraded after four cycles. Besides, the holes and O₂^•- played a significant role in RhB degradation, and it included multiple mechanisms of deethylation, deamination, decarboxylation, and cleavage of ring-structures. Moreover, the treated solution can also show safety to the water receiving environment. Overall, the synthesized Z-Scheme La₂Ti₂O₇/Ag₃PO₄ composite exhibited immense potential for removing various organic pollutants through photocatalytic technology under natural sunlight irradiation.

The optimized Fenton-like activity of Fe single-atom sites by Fe atomic clusters-mediated electronic configuration modulation

The performance optimization of isolated atomically dispersed metal active sites is critical but challenging. Here, TiO2@Fe species-N-C catalysts with Fe atomic clusters (ACs) and satellite Fe-N4 active sites were fabricated to initiate peroxymonosulfate (PMS) oxidation reaction. The AC-induced charge redistribution of single atoms (SAs) was verified, thus strengthening the interaction between SAs and PMS. In detail, the incorporation of ACs optimized the HSO5- oxidation and SO5·- desorption steps, accelerating the reaction progress. As a result, the Vis/TiFeAS/PMS system rapidly eliminated 90.81% of 45 mg/L tetracycline (TC) in 10 min. The reaction process characterization suggested that PMS as an electron donor would transfer electron to Fe species in TiFeAS, generating 1O2. Subsequently, the hVB+ can induce the generation of electron-deficient Fe species, promoting the reaction circulation. This work provides a strategy to construct catalysts with multiple atom assembly-enabled composite active sites for high-efficiency PMS-based advanced oxidation processes (AOPs).

Recent advances in nanomaterials based sustainable approaches for mitigation of emerging organic pollutants

Emerging organic pollutants (EOPs) are a category of pollutants that are relatively new to the environment and recently garnered a lot of attention. The majority of EOPs includes endocrine-disrupting chemicals (EDCs), antibiotic resistance genes (ARGs), pesticides, dyes and pharmaceutical and personal care products (PPCPs). Exposure to contaminated water has been linked to an increase in incidences of malnutrition, intrauterine growth retardation, respiratory illnesses, liver malfunctions, eye and skin diseases, and fatalities. Consequently, there is a critical need for wastewater remediation technologies which are effective, reliable, and economical. Conventional wastewater treatment methods have several shortcomings that can be addressed with the help of nanotechnology. Unique characteristics of nanomaterials (NMs) make them intriguing and efficient alternative in wastewater treatment strategies. This review emphasis on the occurrence of divers emerging organic pollutants (EOPs) in water and their effective elimination via different NMs based methods with in-depth mechanisms. Furthermore, it also delves the toxicity assessment of NMs and critical challenges, which are crucial steps for practical implementations.

Development of MOF Based Recyclable Photocatalyst for the Removal of Different Organic Dye Pollutants

The preparation of metal organic frameworks (MOFs) has come to the forefront in recent years because of their outstanding physical and chemical properties. Many MOFs such as Zn, Co, Ni, Fe, and Ag, etc., have been successfully synthesized. In this work, we followed the solvothermal assisted route to synthesize Ag-MOF (abbreviated as AMOF) nanosheets and then applied them as a photocatalyst to remove different organic pollutants, namely methyl orange (MO), crystal violet (CV), and methylene blue (MB). Chemical composition, optical properties, morphology, and microstructural analysis were analyzed using XPS, UV-visible spectrophotometer, FESEM, TEM, and EDS, respectively. The structural properties of AMOF nanosheets were studied by X-ray diffraction (XRD). Nitrogen adsorption and desorption isotherm analysis were utilized to evaluate the specific surface area and pore size of the AMOF nanosheets. Further, AMOF nanosheets showed notable photocatalytic performance for various dye pollutants degradation. The results confirmed 74.5, 85.5, and 90.7% of MO, CV, and MB dye pollutants removal after 120 min of irradiation with the rate constants (k) of 0.0123, 0.0153, and 0.0158 min^-1, respectively. The effect of superoxide radicals (O₂^-) and photogenerated holes (h⁺) on the organic dye pollutants removal was investigated using radical scavenger trapping studies. Moreover, the stability study also confirmed the recyclability of the photocatalyst. Therefore, the findings of this research present a realizable method to grow AMOF photocatalyst for successful degradation of various dye pollutants.

In-situ construction of Zr-based metal-organic framework core-shell heterostructure for photocatalytic degradation of organic pollutants

Photocatalysis is an eco-friendly promising approach to the degradation of textile dyes. The majority of reported studies involved remediation of dyes with an initial concentration ≤50 mg/L, which was away from the existing values in textile wastewater. Herein, a simple solvothermal route was utilized to synthesize CoFe2O4@UiO-66 core-shell heterojunction photocatalyst for the first time. The photocatalytic performance of the as-synthesized catalysts was assessed through the photodegradation of methylene blue (MB) and methyl orange (MO) dyes at an initial concentration (100 mg/L). Under simulated solar irradiation, improved photocatalytic performance was accomplished by as-obtained CoFe2O4@UiO-66 heterojunction compared to bare UiO-66 and CoFe2O4. The overall removal efficiency of dyes (100 mg/L) over CoFe2O4@UiO-66 (50 mg/L) reached >60% within 180 min. The optical and photoelectrochemical measurements showed an enhanced visible light absorption capacity as well as effective interfacial charge separation and transfer over CoFe2O4@UiO-66, emphasizing the successful construction of heterojunction. The degradation mechanism was further explored, which revealed the contribution of holes (h+), superoxide (•O2 -), and hydroxyl (•OH) radicals in the degradation process, however, h+ were the predominant reactive species. This work might open up new insights for designing MOF-based core-shell heterostructured photocatalysts for the remediation of industrial organic pollutants.

Saiz P, Reizabal A, Wuttke S, Celaya-Azcoaga L, Valverde A, Fernández de Luis R. A State-of-the-Art of Metal-Organic Frameworks for Chromium Photoreduction vs. Photocatalytic Water Remediation

Hexavalent chromium (Cr(VI)) is a highly mobile cancerogenic and teratogenic heavy metal ion. Among the varied technologies applied today to address chromium water pollution, photocatalysis offers a rapid reduction of Cr(VI) to the less toxic Cr(III). In contrast to classic photocatalysts, Metal-Organic frameworks (MOFs) are porous semiconductors that can couple the Cr(VI) to Cr(III) photoreduction to the chromium species immobilization. In this minireview, we wish to discuss and analyze the state-of-the-art of MOFs for Cr(VI) detoxification and contextualizing it to the most recent advances and strategies of MOFs for photocatalysis purposes. The minireview has been structured in three sections: (i) a detailed discussion of the specific experimental techniques employed to characterize MOF photocatalysts, (ii) a description and identification of the key characteristics of MOFs for Cr(VI) photoreduction, and (iii) an outlook and perspective section in order to identify future trends.

Recent Progress of Metal-Organic Frameworks and Metal-Organic Frameworks-Based Heterostructures as Photocatalysts

In the field of photocatalysis, metal-organic frameworks (MOFs) have drawn a lot of attention. MOFs have a number of advantages over conventional semiconductors, including high specific surface area, large number of active sites, and an easily tunable porous structure. In this perspective review, different synthesis methods used to prepare MOFs and MOFs-based heterostructures have been discussed. Apart from this, the application of MOFs and MOFs-based heterostructures as photocatalysts for photocatalytic degradation of different types of pollutants have been compiled. This paper also highlights the different strategies that have been developed to modify and regulate pristine MOFs for improved photocatalytic performance. The MOFs modifications may result in better visible light absorption, effective photo-generated charge carriers (e-/h+), separation and transfer as well as improved recyclability. Despite that, there are still many obstacles and challenges that need to be addressed. In order to meet the requirements of using MOFs and MOFs-based heterostructures in photocatalysis for low-cost practical applications, future development and prospects have also been discussed.

Efficient photodegradation of dyes by a new 3D Cd(II) MOF with rare fsh topology

Metal–organic frameworks (MOFs) can be regarded as 3D coordination polymers that adopt ordered porous structures and possess abundant active sites, which make them promising photocatalysts for the degradation of organic...