An overview of MXene-Based nanomaterials and their potential applications towards hazardous pollutant adsorption

Remediation of Safranin-O and Acid Fuchsin by Using Ti3C2 MXene /rGo-Cu2O Nanocomposite: Preparation, Characterization, Isotherm, Kinetics and Thermodynamic Studies

In recent years, MXene has become one of the most intriguing two-dimensional layered (2Dl) materials extensively explored for various applications. In this study, a Ti3C2 MXene/rGo-Cu2O Nanocomposite (TGCNCs) was developed to eliminate Safranin-O effectively (SO) and Acid Fuchsin (AF) as cationic dyes from the aquatic environment. Multistep was involved in the preparation of the adsorbent system, including the Preparation of Ti3C2, after that, GO synthesis by the Humer method, followed by rGO production, then added CuSO4 to obtain a final Nanocomposite (NCs) called "TGCNCs". The structure of TGCNCs can be varied in several ways, including FTIR, SEM, TGA, Zeta, EDX, XRD, and BET, to affirm the efficacious preparation of TGCNCs. A novel adsorbent system was developed to remove SO and AF, both cationic dyes. Various adsorption conditions have been optimized through batch adsorption tests, including the pH of the solution (4-12), the effect of dosage (0.003-0.03 g), the impact of the contact time (5-30 min), and the effect of beginning dye concentration (25-250 mg/L). Accordingly, the TGCNCs exhibited excellent fitting for Freundlich isotherm mode, resulting in maximum AF and SO adsorption capacities of 909.09 and 769.23 mg.g-1. This research on adsorption kinetics suggests that a pseudo-second-order (PSO) model would fit well with the experimental data ( = 0.998 and = 0.990). It is evident from the thermodynamic parameters that adsorption is an endothermic process that is spontaneous and favourable. During the adsorption of SO and AF onto NCs, it is hypothesized that these molecules interact intramolecularly through stacking interactions, H-bond interactions, electrostatic interactions, and entrapment within the polymeric Poros structure nanocomposite. Regeneration studies lasting up to five cycles were the most effective for both organic dyes under study.

Ultrasonication-assisted synthesis of transition metal carbide of MXene: an efficient and promising material for photocatalytic organic dyes degradation of rhodamine B and methylene blue in wastewater

Water pollutants of non-biodegradable toxic aromatic dye including Methylene blue (MB) and Rhodamine (RhB) are extremely carcinogenic thiazines used in various industries such as leather industry, paper industry, and the dyeing industry. The presence of dyes in wastewater causes severe threats to human health that are responsible for various harmful chronic or acute diseases and also shows an adverse impact on the environment as it reduces transparency and is harmful to water microorganisms. To overcome severe issues, many traditional techniques have been used to remove toxic pollutants, but these methods are insufficient to remove chemically stable dyes that remain in the treated wastewater. However, the photocatalytic degradation process is an efficient approach to degrade the dye up to the maximum extent with improved efficiency. Therefore, in this work, a new class of two-dimensional (2D) transition metal carbide of Titanium Carbide (Ti3C2Tx) MXene material was used for the organic dyes degradation such as MB and RhB using a photocatalytic process. A layered structure of hexagonal lattice symmetry of Ti3C2Tx MXene was successfully synthesized from the Titanium Aluminum Carbide of Ti3AlC2 bulk phase using an exfoliation process. Further, the XRD spectrum confirms the transformation of bulk MAX phase having (002) plane at 9.2° to Ti3C2Tx MXene of (002) plane at 8.88° confirms the successful removal of Al layer from MAX phase. A smooth, transparent, thin sheet-like morphology of Ti3C2Tx nanosheet size were found to be in the range of 70 to 150 nm evaluated from TEM images. Also, no holes or damages in the thin sheets were found after the treatment with strong hydrofluoric acid confirms the formation Ti3C2Tx layered sheets. The synthesized Ti3C2Tx MXene possesses excellent photocatalytic activity for the degradation of dyes MB, RhB, and mixtures of MB and RhB dyes. MB dye degraded with a degradation percentage efficiency of 99.32% in 30 min, while RhB dye was degraded upto 98.9% in 30 min. Also, experiments were conducted for degradation of mixture of MB and RhB dyes by UV light, and the degradation percentage efficiency were found to be 98.9% and 99.75% for mixture of MB and RhB dye in 45 min, respectively. Moreover, reaction rate constant (k) was determined for each dye of MB, RhB, and mixtures of MB and RhB and was found to be 0.0215 min-1 and 0.0058 min-1, and for mixtures, it was 0.0020 min-1 and 0.009 min-1, respectively.

Enzyme hybrid nanoflowers and enzyme@metal-organic frameworks composites: fascinating hybrid nanobiocatalysts

Hybrid nanomaterials have recently emerged as a new interface of nanobiocatalysis, serving as a host platform for enzyme immobilization. Enzyme immobilization in inorganic crystal nanoflowers and metal-organic frameworks (MOFs) has sparked the bulk of scientific interest due to their superior performances. Many breakthroughs have been achieved recently in the preparation of various types of enzyme@MOF and enzyme-hybrid nanoflower composites. However, it is unfortunate that there are few reviews in the literature related to enzyme@MOF and enzyme-hybrid nanoflower composites and their improved synthesis strategies and their applications in biotechnology. In this review, innovative synthetic strategies for enzyme@MOF composites and enzyme-hybrid nanoflower composites are discussed. Enzyme@MOF composites and enzyme-hybrid nanoflower composites are reviewed in terms of biotechnological applications and potential research directions. We are convinced that a fundamental study and application of enzyme@MOF composites and enzyme-hybrid nanoflower composites will be understood by the reader as a result of this work. The summary of different synthetic strategies for enzyme@MOF composites and enzyme-hybrid nanoflower composites and the improvement of their synthetic strategies will also benefit the readers and provide ideas and thoughts in the future research process.

Unveiling combined ecotoxicity: Interactions and impacts of engineered nanoparticles and PPCPs

Emerging contaminants such as engineered nanoparticles (ENPs), pharmaceuticals and personal care products (PPCPs) are of great concern because of their wide distribution and incomplete removal in conventional wastewater and soil treatment processes. The production and usage of ENPs and PPCPs inevitably result in their coexistence in different environmental media, thus posing various risks to organisms in aquatic and terrestrial ecosystems. However, the existing literature on the physicochemical interactions between ENPs and PPCPs and their effects on organisms is rather limited. Therefore, this paper summarized the ecotoxicity of combined ENPs and PPCPs by discussing: (1) the interactions between ENPs and PPCPs, including processes such as aggregation, adsorption, transformation, and desorption, considering the influence of environmental factors like pH, ionic strength, dissolved organic matter, and temperature; (2) the effects of these interactions on bioaccumulation, bioavailability and biotoxicity in organisms at different trophic levels; (3) the impacted of ENPs and PPCPs on cellular-level biological process. This review elucidated the potential ecological hazards associated with the interaction of ENPs and PPCPs, and serves as a foundation for future investigations into the ecotoxicity and mode of action of ENPs, PPCPs, and their co-occurring metabolites.

Unveiling the contemporary progress of graphene-based nanomaterials with a particular focus on the removal of contaminants from water: a comprehensive review

Water scarcity and pollution pose significant challenges to global environmental sustainability and public health. As these concerns intensify, the quest for innovative and efficient water treatment technologies becomes paramount. In recent years, graphene-based nanomaterials have emerged as frontrunners in this pursuit, showcasing exceptional properties that hold immense promise for addressing water contamination issues. Graphene, a single layer of carbon atoms arranged in a hexagonal lattice, exhibits extraordinary mechanical, electrical, and chemical properties. These inherent characteristics have led to a surge of interest in leveraging graphene derivatives, such as graphene oxide (GO), reduced graphene oxide and functionalized graphene, for water treatment applications. The ability of graphene-based nanomaterials to adsorb, catalyze, and photocatalyze contaminants makes them highly versatile in addressing diverse pollutants present in water sources. This review will delve into the synthesis methods employed for graphene-based nanomaterials and explore the structural modifications and functionalization strategies implemented to increase their pollutant removal performance in water treatment. By offering a critical analysis of existing literature and highlighting recent innovations, it will guide future research toward the rational design and optimization of graphene-based nanomaterials for water decontamination. The exploration of interdisciplinary approaches and cutting-edge technologies underscores the evolving landscape of graphene-based water treatment, fostering a path toward sustainable and scalable solutions. Overall, the authors believe that this review will serve as a valuable resource for researchers, engineers, and policymakers working toward sustainable and effective solutions for water purification.

Preparation of cationic surfactant modified two-dimensional (2D) multi-layered Ti3C2Tx MXene for methyl orange removal from aqueous solution: Kinetic, equilibrium, and adsorption mechanisms

In this study, cetyltrimethylammonium bromide-modified multi-layered Ti3C2Tx MXene (CMM) was produced using a Ti3AlC2 precursor, and its capacity to remove the anionic dye, methyl orange (MO), was investigated in detail. An electrostatic combination between negatively charged Ti3C2Tx nanosheets and cationic surfactant solution (CTAB) produced this adsorbent. This triggered an exposure of the accessible active sites to further boost adsorption effectiveness by increasing the distance between the MXene nanosheets. Prepared adsorbents were characterized using some analytical techniques, including TGA, FESEM, EDX, FTIR, XRD, and N2 adsorption-desorption. Furthermore, some influencing parameters such as contact time, solution of pH, loading adsorbent, and initial dye concentration were evaluated, with findings showing that MO could adsorb CMM to its maximum capacity at an adsorbent dosage of 0.83 g/L, a contact time of 90 min, and a solution pH of 3. Adsorption results were found to be highly linked with both Langmuir isotherm (R2 = 0.9990) and the pseudo-second-order kinetic model (R2 = 0.9924). The maximum adsorption capacity of MO was obtained at approximately 213.00 mg/g. Also, hydrogen bonding, π-cation interactions, and electrostatic adsorption can all be implicated in the mechanism of MO adsorption on CMM. The fabricated CMM is presented as a prospective adsorbent for the removal of dyes from polluted water, demonstrating robust recyclability for up to the fifth iteration. All these outstanding properties indicate that cetyltrimethylammonium bromide-modified multi-layered Ti3C2Tx MXene can be considered as applicable adsorbents for textile pollutants.

Coordination-Driven Heterochiral Self-Assembly: Construction of Cd(II) Coordination Polymers with Sorption Behaviors for Iodine and Dyes

A racemic bispyridyl ligand (L) was synthesized via a Schiff base condensation reaction. Four Cd(II) complexes, {[CdL2Cl2]·2DMF}n (1), [CdLI2]n (2), {[CdL2Br2]·4H2O}n (3), and {[CdL2(H2O)2](NO3)2·2CH3OH·8H2O}n (4), were synthesized and further characterized based on this ligand. Single-crystal structures show that the coordination-driven assembly of the bispyridyl ligand with Cd(II) salts bearing different counteranions can lead to multidimensional coordination polymers via a heterochiral self-discrimination process. Complex 1 exists as a one-dimensional (1D) looped chain polymer, and complex 2 exists as a 1D zigzag chain polymer. Complex 3 is a 2D grid coordination polymer, and complex 4 exists as a 3D framework polymer. Furthermore, the iodine sorption capacities of the four complexes were investigated in the solution of n-hexane and water as well as in the iodine steam. The dye sorption behaviors were investigated in water, which showed that complex 2 exhibited good adsorption for crystal violet (CV), while complex 4 had good adsorption capability toward direct yellow 4 (DY).

Natural oxidation of Ti3C2Tx to construct efficient TiO2/Ti3C2Tx photoactive heterojunctions for advanced photoelectrochemical biosensing of folate-expressing cancer cells

The rapid-charge carrier recombination and low conductivity are critical in devising an efficient photoelectrochemical (PEC) sensor. Herein, we propose partial oxidation of few-layered MXene (Ti₃C₂T_x) to construct a photo-active TiO₂/Ti₃C₂T_x platform that could be configured for PEC sensing of folate receptors (FR), particularly, FR-expressing breast cancer cells (MDA-MB-231). MXene-Ti₃C₂T_x dispersion was oxidized in natural-open air conditions, where continuous exposure for six (06) days allowed for homogeneous in-situ growth of TiO₂ over MXenes nanosheets (MX-06). This exposure enabled partial oxidation of MXene-sheets with a balanced TiO₂ to MXene content that could exhibit improved photoresponsive characteristics owing to the synergism of redox-active TiO₂ and highly conductive underlying Ti₃C₂T_x. The photoelectrode was then adapted for biorecognition by conjugating chitosan and folic acid (FA) networks, which permitted selective detection of FR-expressed cells with significant antifouling capabilities against common proteins such as bovine serum album (BSA), hemoglobin, and immunoglobulin G. (Ig G). The detection mechanism relies on FA's strong affinity for cancer cell folate receptors, which proportionally inhibited the photoelectrodes PEC oxidation response to ascorbic acid (AA)(mediator). The proposed inhibition strategy enabled sensitive detection of FR-expressed MDA-MB-231 cells in the concentration range of 1 × 10² to 2 × 10⁷ cells/mL with a detection limit of 1.01 cells/mL (S/N = 3).

New insights into MXene applications for sustainable environmental remediation

Multiple ecological contaminants in gaseous, liquid, and solid forms are vented into ecosystems due to the huge growth of industrialization, which is today at the forefront of worldwide attention. High-efficiency removal of these environmental pollutants is a must because of the potential harm to public health and biodiversity. The alarming concern has led to the synthesis of improved nanomaterials for removing pollutants. A path to innovative methods for identifying and preventing several obnoxious, hazardous contaminants from entering the environment is grabbing attention. Various applications in diverse industries are seen as a potential directions for researchers. MXene is a new, excellent, and advanced material that has received greater importance related to the environmental application. Due to its unique physicochemical and mechanical properties, high specific surface area, physiological compatibility, strong electrodynamics, and raised specific surface area wettability, its applications are growing. This review paper examines the most recent methods and trends for environmental pollutant removal using advanced 2D Mxene materials. In addition, the history and the development of MXene synthesis were elaborated. Furthermore, an extreme summary of various environmental pollutants removal has been discussed, and the future challenges along with their future perspectives have been illustrated.

Rapid growth of MXene-based membranes for sustainable environmental pollution remediation

Water consumption has grown in recent years due to rising urbanization and industry. As a result, global water stocks are steadily depleting. As a result, it is critical to seek strategies for removing harmful elements from wastewater once it has been cleaned. In recent years, many studies have been conducted to develop new materials and innovative pathways for water purification and environmental remediation. Due to low energy consumption, low operating cost, and integrated facilities, membrane separation has gained significant attention as a potential technique for water treatment. In these directions, MXene which is the advanced 2D material has been explored and many applications were reported. However, research on MXene-based membranes is still in its early stages and reported applications are scatter. This review provides a broad overview of MXenes and their perspectives, including their synthesis, surface chemistry, interlayer tuning, membrane construction, and uses for water purification. Application of MXene based membrane for extracting pollutants such as heavy metals, organic contaminants, and radionuclides from the aqueous water bodies were briefly discussed. Furthermore, the performance of MXene-based separation membranes is compared to that of other nano-based membranes, and outcomes are very promising. In order to shed more light on the advancement of MXene-based membranes and their operational separation applications, significant advances in the fabrication of MXene-based membranes is also encapsulated. Finally, future prospects of MXene-based materials for diverse applications were discussed.

Green and Superior Adsorbents Derived from Natural Plant Gums for Removal of Contaminants: A Review

The ubiquitous presence of contaminants in water poses a major threat to the safety of ecosystems and human health, and so more materials or technologies are urgently needed to eliminate pollutants. Polymer materials have shown significant advantages over most other adsorption materials in the decontamination of wastewater by virtue of their relatively high adsorption capacity and fast adsorption rate. In recent years, "green development" has become the focus of global attention, and the environmental friendliness of materials themselves has been concerned. Therefore, natural polymers-derived materials are favored in the purification of wastewater due to their unique advantages of being renewable, low cost and environmentally friendly. Among them, natural plant gums show great potential in the synthesis of environmentally friendly polymer adsorption materials due to their rich sources, diverse structures and properties, as well as their renewable, non-toxic and biocompatible advantages. Natural plant gums can be easily modified by facile derivatization or a graft polymerization reaction to enhance the inherent properties or introduce new functions, thus obtaining new adsorption materials for the efficient purification of wastewater. This paper summarized the research progress on the fabrication of various gums-based adsorbents and their application in the decontamination of different types of pollutants. The general synthesis mechanism of gums-based adsorbents, and the adsorption mechanism of the adsorbent for different types of pollutants were also discussed. This paper was aimed at providing a reference for the design and development of more cost-effective and environmentally friendly water purification materials.

Application of 2D Materials for Adsorptive Removal of Air Pollutants

Air pollution is on the priority list of global safety issues, with the concern of fatal environmental and public health deterioration. 2D materials are potential adsorbent materials for environmental decontamination, owing to their high surface area, manageable interlayer binding, large surface-to-volume ratio, specific binding capability, and chemical, thermal, and mechanistic stability. Specifically, graphene oxide and reduced graphene oxide have been attracting attention, taking advantage of their low cost synthesis, excessive oxygen containing surface functionalities, and intrinsic aqueous dispersibility, making them desirable for the development of cost-effective, high performance air filters. Many different material designs have been proposed to expand their filtration capability, including the functionalization and integration with other metals and metal oxides, which act not only as binding agents to the target pollutants but also as antimicrobial agents. This review highlights the advantages and drawbacks of 2D materials for air filtration and summarizes the interrelationships among various strategies and the resultant filtration performance in terms of structural engineering, morphology control, and material compositions. Finally, potential future directions are suggested toward the idealized designs of 2D material based air filters.

MXene-Based Photocatalysts in Degradation of Organic and Pharmaceutical Pollutants

These days, explorations have focused on designing two-dimensional (2D) nanomaterials with useful (photo)catalytic and environmental applications. Among them, MXene-based composites have garnered great attention owing to their unique optical, mechanical, thermal, chemical, and electronic properties. Various MXene-based photocatalysts have been inventively constructed for a variety of photocatalytic applications ranging from pollutant degradation to hydrogen evolution. They can be applied as co-catalysts in combination with assorted common photocatalysts such as metal sulfide, metal oxides, metal-organic frameworks, graphene, and graphitic carbon nitride to enhance the function of photocatalytic removal of organic/pharmaceutical pollutants, nitrogen fixation, photocatalytic hydrogen evolution, and carbon dioxide conversion, among others. High electrical conductivity, robust photothermal effects, large surface area, hydrophilicity, and abundant surface functional groups of MXenes render them as attractive candidates for photocatalytic removal of pollutants as well as improvement of photocatalytic performance of semiconductor catalysts. Herein, the most recent developments in photocatalytic degradation of organic and pharmaceutical pollutants using MXene-based composites are deliberated, with a focus on important challenges and future perspectives; techniques for fabrication of these photocatalysts are also covered.

MXenes in Cancer Nanotheranostics

MXenes encompass attractive properties such as a large surface area, unique chemical structures, stability, elastic mechanical strength, excellent electrical conductivity, hydrophilicity, and ease of surface functionalization/modifications, which make them one of the broadly explored two-dimensional materials in the world. MXene-based micro- and nanocomposites/systems with special optical, mechanical, electronic, and excellent targeting/selectivity features have been explored for cancer nanotheranostics. These materials exhibit great diagnostic and therapeutic potential and offer opportunities for cancer photoacoustic imaging along with photodynamic and photothermal therapy. They can be applied to targeted anticancer drug delivery while being deployed for the imaging/diagnosis of tumors/cancers and malignancies. MXene-based systems functionalized with suitable biocompatible or bioactive agents have suitable cellular uptake features with transferring potential from vascular endothelial cells and specific localization, high stability, and auto-fluorescence benefits at different emission-excitation wavelengths, permitting post-transport examination and tracking. The surface engineering of MXenes can improve their biocompatibility, targeting, bioavailability, and biodegradability along with their optical, mechanical, and electrochemical features to develop multifunctional systems with cancer theranostic applications. However, challenges still persist in terms of their environmentally benign fabrication, up-scalability, functionality improvement, optimization conditions, surface functionalization, biocompatibility, biodegradability, clinical translational studies, and pharmacokinetics. This manuscript delineates the recent advancements, opportunities, and important challenges pertaining to the cancer nanotheranostic potential of MXenes and their derivatives.

Construction of Cu(I)-Organic Frameworks with Effective Sorption Behavior for Iodine and Congo Red

The assembly of a tetradentate pyridine-derived ligand with CuX has afforded two isostructural Cu(I)-organic frameworks [Cu₂X₂(TBD)·DMF]_n (X = Cl for 1 and Br for 2) in this work. Structural analysis indicates that the compounds feature hybrid layered architectures, and the three-dimensional supramolecular frameworks are finally fabricated through the alternative stacking of adjacent layers wherein large open channels are simultaneously constructed. The chemical stability has been studied showing the excellent skeleton maintenance of the prepared solids in various solvents and even in water. Moreover, the iodine and dye sorption performance for compound 1 has been further tested. The Cu(I)-based metal-organic framework exhibits outstanding sorption and separation abilities on the targeted species, which could be considered as a promising adsorbent with high efficiency and selectivity.

Synthesis, Toxicity Assessment, Environmental and Biomedical Applications of MXenes: A Review

MXenes are a family of two-dimensional (2D) composite materials based on transition metal carbides, nitrides and carbonitrides that have been attracting attention since 2011. Combination of electrical and mechanical properties with hydrophilicity makes them promising materials for biomedical applications. This review briefly discusses methods for the synthesis of MXenes, their potential applications in medicine, ranging from sensors and antibacterial agents to targeted drug delivery, cancer photo/chemotherapy, tissue engineering, bioimaging, and environmental applications such as sensors and adsorbents. We focus on in vitro and in vivo toxicity and possible mechanisms. We discuss the toxicity analogies of MXenes and other 2D materials such as graphene, mentioning the greater biocompatibility of MXenes. We identify existing barriers that hinder the formation of objective knowledge about the toxicity of MXenes. The most important of these barriers are the differences in the methods of synthesis of MXenes, their composition and structure, including the level of oxidation, the number of layers and flake size; functionalization, test concentrations, duration of exposure, and individual characteristics of biological test objects Finally, we discuss key areas for further research that need to involve new methods of nanotoxicology, including predictive computational methods. Such studies will bring closer the prospect of widespread industrial production and safe use of MXene-based products.