Synthesis of bifunctional NiFe layered double hydroxides (LDH)/Mo-doped g-C3N4 electrocatalyst for efficient methanol oxidation and seawater splitting

The fate of intracellular and extracellular antibiotic resistance genes during ultrafiltration-ultraviolet-chlorination in a full-scale wastewater tretament plant

Effluent from wastewater treatment plants (WWTPs) is recognized as a significant source of antibiotic resistance genes (ARGs) in the environment. Advanced treatment processes such as ultrafiltration (UF), ultraviolet (UV) light disinfection, and chlorination have emerged as promising approaches for ARG removal. However, the efficacy of sequential disinfection processes, such as UF-UV-chlorination on intracellular (iARGs) and extracellular ARGs (eARGs), remains largely unknown. This study investigates the impact of this sequential disinfection process on the fate of iARGs, eARGs, and a crucial mobile genetic element (intI1) within a full-scale WWTP. Our findings revealed that the UF-UV-chlorination process effectively reduced the overall absolute abundance of detected ARGs in the effluent by 1.93 log, and intI1 by 0.86 log, compared to secondary effluent. The majority of these removals was achieved due to the UF and UV disinfection, while chlorination showed negligible impact on the absolute abundance of ARGs in the final effluent. Notably, five genera were identified as potential hosts for intI1 and eight iARGs, including aac(6')-Ib-cr, drfA1, sul1, sul2, ermB, mefA, tetA, and tetX, suggesting a high potential for horizontal gene transfer involving these ARGs. Overall, this study demonstrated that UF-UV-chlorination is a highly effective method for reducing ARGs in effluent from WWTPs.

Strontium doped Fe-based porous carbon for highly efficient electrocatalytic ORR and MOR reactions

The catalytic activity improvement of Fe-based active sites derived from metal organic frameworks toward oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) remains a major challenge. In this study, the growth of strontium decorated 2-methylimidazole zinc salt (Sr/ZIF-8) is prepared as a carrier to vapor deposited iron formation Sr doped Fe-based nitrogen-doped carbon framework (named as Sr/FeNC). After high-temperature pyrolysis and vapor deposition, strontium carbonate nanocrystals are evenly dispersed on the shrunk dodecahedron carbon frame and multitudinous Fe-based active catalytic sites are embedded in carbon skeleton. The optimal Sr/FeNC-2 catalyst demonstrates the outstanding ORR performance in terms of a half-wave potential of 0.851 V and an onset potential of 0.90 V, while Sr/FeNC-2 exhibits a high current density of 18.2 mA cm-2 and a lower Tafel slope of 21 mV dec-1 in MOR. The exceptional catalytic activity could be ascribed to the synergistic coupling effect of strontium compounds with Fe-based catalytic sites (Fe-Nx, Fe, and iron oxide). In particular, the formation of SrCO3 affects the bonding configuration of the iron species sites, leading to an optimization of the electronic structure within the multihole carbon matrix. The synthetic approach presents a prospective strategy for future endeavors in developing innovative and advanced bifunctional catalysts for ORR and MOR.

Tuning the interface of MIMII(OH)F@MIMII1-xS (MⅠ: Ni, Co; MⅡ: Co, Fe) by atomic replacement strategy toward high performance overall water splitting

Constructing heterostructure is considered as one of the most promising strategies to reveal high efficiency hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance. Nevertheless, it is highly challenging to obtain stable interfaces and sufficient active sites via conventional method. In addition, Ni, Co and Fe elements share the valence electron structures of 3d6-84s2, the appropriate integration of these metals to induce synergistic effect in multicomponent electrocatalysts can enhance electrochemical activity. Herein, in this work, the MIMII(OH)F@MIMII1-xS (NiFe(OH)F@NiFe1-xS, NiCo(OH)F@NiCo1-xS, CoFe(OH)F@CoFe1-xS) autogenous heterostructure on nickel foam are constructed. As a result, NiFe(OH)F@NiFe1-xS-0.05, NiCo(OH)F@NiCo1-xS-0.05, and CoFe(OH)F@CoFe1-xS-0.05 demonstrate outstanding overpotential for HER (70 mV, 90 mV, 81 mV at -10 mA cm-2) and OER (370 mV, 470 mV, 370 mV at 10 mA cm-2) in alkaline electrolyte, while the overpotential for HER is 176 mV, 189 mV, 167 mV at -10 mA cm-2 and corresponding OER is 290 mV, 390 mV, 300 mV at 10 mA cm-2 in simulated seawater, respectively. In addition, the NiFe, NiCo, CoFe-based electrolyzer acquire favorable overall water splitting activity in alkaline (1.72 V, 1.87 V, 1.66 V) and simulated seawater (1.73 V, 1.75 V, 1.69 V) at 10 mA cm-2. Overall, the above results authenticate the feasibility of developing autogenous heterostructure electrocatalysts for providing hydrogen and oxygen in alkaline and simulated seawater.

Binary Ni-Fe layered double hydroxide on flexible nickel foam for the wide-range voltammetric detection of fibrinogen in simulated body fluid

Fibrinogen, a circulating glycoprotein in the blood, is a potential biomarker of various health conditions. This work reports a flexible electrochemical sensor based on Ni-Fe layered double hydroxide (Ni-Fe LDH) coated on Nickel foam (Ni-Fe LDH/NF) to detect fibrinogen in simulated human body fluid (or blood plasma). The nanoflakes like morphology and hexagonal crystal structure of LDH, synthesized via urea hydrolysis assisted precipitation technique, are revealed by scanning electron microscopy (SEM) and powder x-ray diffraction (PXRD) techniques, respectively. The fabricated sensor exhibits linearity in a wide dynamic range covering the physiological concentration, from 1 ng ml-1to 10 mg ml-1, with a sensitivity of 0.0914 mA (ng/ml)-1(cm)-2. This LDH-based sensor is found to have a limit of detection (LOD) of 0.097 ng ml-1and a limit of quantification (LOQ) of 0.294 ng ml-1(S/N = 3.3). The higher selectivity of the sensor towards fibrinogen protein is verified in the presence of various interfering analytes such as dopamine, epinephrine, serotonin, glucose, potassium, chloride, and magnesium ions. The sensor is successful in the trace-level detection of fibrinogen in simulated body fluid with excellent recovery percentages ranging from 99.5% to 102.5%, proving the synergetic combination of 2D Ni-Fe layered double hydroxide and 3D nickel foam as a promising platform for electrochemical sensing that has immense potential in clinical applications.

What is the role of interface in the catalytic elimination of multi-carbon air pollutants?

Multi-carbon air pollutants pose serious hazards to the environment and health, especially soot and volatile organic compounds (VOCs). Catalytic oxidation is one of the most effective technologies for eliminating them. The oxidation of soot and most hydrocarbon VOCs begins with C-H (or edge-CH) activation, so this commonality can be targeted to design active sites. Rationally designed interface nanostructures optimize metal-support interactions (MSIs), providing suitable active sites for C-H activation. Meanwhile, the interfacial reactant spillover facilitates the further decomposition of activated intermediates. Thus, rationally exploiting interfacial effects is critical to enhancing catalytic activity. In this review, we analyzed recent advances in the following aspects: I. Understanding of the interface effects and design; II. Optimization of the catalyst-reactant contact, metal-support interface, and MSIs; III. Design of the interfacial composition and perimeter. Based on the analysis of the advances and current status, we provided challenges and opportunities for the rational design of interface nanostructures and interface-related stability. Meanwhile, a critical outlook was given on the interfacial sites of single-atom catalysts (SACs) for specific activation and catalytic selectivity.

Hierarchical N-doped carbon nanofiber-loaded NiCo alloy nanocrystals with enhanced methanol electrooxidation for alkaline direct methanol fuel cells

The high catalytic activity of non-precious metals in alkaline media opens a new direction for the development of alkaline direct methanol fuel cell (ADMFC) electrocatalysts. Herein, a highly dispersed N-doped carbon nanofibers (CNFs) -loaded NiCo non-precious metal alloy electrocatalyst based on metal-organic frameworks (MOFs) was prepared, which conferred excellent methanol oxidation activity and resistance to carbon monoxide (CO) poisoning through a surface electronic structure modulation strategy. The porous electrospun polyacrylonitrile (PAN) nanofibers and the P-electron conjugated structure of polyaniline chains provide fast charge transfer channels, enabling electrocatalysts with abundant active sites and efficient electron transfer. The optimized NiCo/N-CNFs@800 was tested as an anode catalyst for ADMFC single cell and exhibited a power density of 29.15 mW cm^-2. Due to the fast charge transfer and mass transfer brought by its one-dimensional porous structure and the synergistic effect between NiCo alloy, NiCo/N-CNFs@800 is expected to be an economical, efficient and CO-resistant methanol oxidation reaction (MOR) electrocatalyst.