Photocatalytic degradation of dyes by novel electrospun nanofibers: A review

Advanced photocatalysis as a viable and sustainable wastewater treatment process: A comprehensive review

In our era, water pollution not only poses a serious threat to human, animal, and biotic life but also causes serious damage to infrastructure and the ecosystem. A set of physical, chemical, and biological technologies have been exploited to decontaminate and/or disinfect water pollutants, toxins, microbes, and contaminants, but none of these could be ranked as sustainable and scalable wastewater technology. The photocatalytic process can harmonize the sunlight to degrade certain toxins, chemicals, microbes, and antibiotics, present in water. For example, transition metal oxides (ZnO, SnO2, TiO2, etc.), when integrated into an organic framework of graphene or nitrides, can bring about more than 90% removal of dyes, microbial load, pesticides, and antibiotics. Similarly, a modified network of graphitic carbon nitride can completely decontaminate petrochemicals. The present review will primarily highlight the mechanistic aspects for the removal and/or degradation of highly concerned contaminants, factors affecting photocatalysis, engineering designs of photoreactors, and pros and cons of various wastewater treatment technologies already in practice. The photocatalytic reactor can be a more viable and sustainable wastewater treatment opportunity. We hope the researcher will find a handful of information regarding the advanced oxidation process accomplished via photocatalysis and the benefits associated with the photocatalytic-type degradation of water pollutants and contaminants.

Engineering a staggered type-II Bi2WO6/WO3 heterojunction with improved photocatalytic activity in wastewater treatment

In recent years, the removal organic pollutants from wastewater by advanced oxidation processes, especially photocatalysis, has become a meaningful approach due to its eco-friendliness and low cost. Herein, staggered type-II Bi2WO6/WO3 heterojunction photocatalysts were prepared by a facile hydrothermal route and investigated by modern physicochemical methods (X-ray diffraction, scanning electron microscopy, low-temperature nitrogen adsorption-desorption, and diffuse reflectance spectroscopy). The optimized BWOW-5 photocatalyst exhibited a H2O2-assisted photocatalytic methylene blue removal efficiency of 94.1% (k = 0.01414 min-1) within 180 min under optimal reaction conditions, which is much higher than that of unmodified Bi2WO6 and WO3 due to efficient separation of the photogenerated charge carriers. The trapping experiments demonstrated that photogenerated hydroxyl radicals and holes play a key role in the photodegradation reaction. Moreover, the optimized BWOW-5 heterojunction photocatalyst exhibited excellent activity in the H2O2-assisted degradation of other pollutants, namely phenol, isoniazid, levofloxacin, and dibenzothiophene with the removal rate of 63.1, 73.6, 95.0, and 72.4%, respectively. This investigation offers a design strategy for Bi2WO6-based multifunctional photocatalytic composites with improved activity for organic pollutant degradation.

Controlled solvothermal synthesis of self-assembled SrTiO3 microstructures for expeditious solar-driven photocatalysis dye effluents degradation

In this work, the self-assembled SrTiO3 (STO) microstructures were synthesized via a facile one-step solvothermal method. As the solvothermal temperature increased from 140 °C to 200 °C, the STO changed from a flower-like architecture to finally an irregularly aggregated flake-like morphology. The photocatalytic performance of as-synthesized samples was assessed through the degradation of rhodamine B (RhB) and malachite green (MG) under simulated solar irradiation. The results indicated that the photocatalytic performance of STO samples depended on their morphology, in which the hierarchical flower-like STO synthesized at 160 °C demonstrated the highest photoactivities. The photocatalytic enhancement of STO-160 was benefited from its large surface area and mesoporous configuration, hence facilitating the presence of more reactive species and accelerating the charge separation. Moreover, the real-world practicality of STO-160 photocatalysis was examined via the real printed ink wastewater-containing RhB and MG treatment. The phytotoxicity analyses demonstrated that the photocatalytically treated wastewater increased the germination of mung bean seeds, and the good reusability of synthesized STO-160 in photodegradation reaction also promoted its application in practical scenarios. This work highlights the promising potential of tailored STO microstructures for effective environmental remediation applications.

Heterostructure g-C3N4/Bi2MoO6 PVDF nanofiber composite membrane for the photodegradation of steroid hormone micropollutants

Photocatalytic membrane reactors (PMRs) are a promising technology for micropollutant removal. Sunlight utilization and catalyst surface sites limit photodegradation. A poly(vinylidene fluoride) (PVDF) nanofiber composite membrane (NCM) with immobilized visible-light-responsive g-C3N4/Bi2MoO6 (BMCN) were developed. Photodegradation of steroid hormones with the PVDF-BMCN NCM was investigated with varying catalyst properties, operating conditions, and relevant solution chemistry under solar irradiation. Increasing CN ratio (0-65 %) enhanced estradiol (E2) degradation from 20 ± 10 to 75 ± 7 % due to improved sunlight utilization and photon lifetime. PVDF nanofibers reduced self-aggregation of catalysts. Hydraulic residence time and light intensity enhanced the photodegradation. With the increasing pH value, the E2 removal decreased from 84 ± 4 to 67 ± 7 % owing to electrical repulsion and thus reduced adsorption between catalysts and E2. A removal of 96 % can be attained at environmentally relevant feed concentration (100 ng.L-1) with a flux of 60 L.m-2.h-1, irradiance of 100 mW.cm-2, and 1 mg.cm-2 BMCN65 loading. This confirmed that heterojunction photocatalysts can enhance micropollutants degradation in PMRs.

Effects of cation types in persulfate on physicochemical and adsorptive properties of biochar prepared from persulfate-pretreated bamboo

The adsorption behaviors of biochar are largely impacted by biomassfeedstock. In this study, two biochars were prepared from torrefaction of ammonium persulfate- and potassium persulfate-pretreated bamboo and then activated by cold alkali, which are named as ASBC and KSBC, respectively. The two biochars were characterized by different instruments, and their adsorption properties over cationic methylene blue (MB) were compared. The type of persulfates little affected the specific surface areas, but significantly impacted O (29.54 % vs. 35.113 %) and N (12.13 % vs. 3.74 %) contents, functional groups, and zeta potentials of biochars. MB adsorption onto ASBC/KSBC is a single-layer chemical endothermic process and ASBC/KSBC exhibit high adsorption capacity over MB (475/881 mg·g-1) at 303 K. Obviously, the sorption capacity of MB onto KSBC much surpasses that of MB onto ASBC. These results indicate biomass pre-treatment is a cheap and convenient method to prepare biochars with unique physicochemical and adsorptive properties.

Magnetically separable Co0.6Fe2.4O4/MIL-101-NH2 adsorbent for Congo red efficient removal

The development of effective and practical adsorbents for eliminating pollutants still remains a significant challenge. Herein, we synthesized a novel magnetically separable composite, Co0.6Fe2.4O4/MIL-101-NH2, through the in-situ growth of MIL-101-NH2 on magnetic nanoparticles, designed specifically for the removal of Congo red (CR) from aqueous solutions. MIL-101-NH2 possessed high BET surface area (240.485 m2•g-1) and facile magnetic separation function and can be swiftly separated (within 30 s) through an external magnetic field post-adsorption. The investigation systematically explored the influence of crucial parameters, including adsorbent dosage, pH, adsorption duration, temperature, and the presence of interfering ions, on CR adsorption performance. Findings indicate that CR adsorption adheres to the pseudo-second-order (PSO) kinetic model and the Langmuir isotherm model. Thermodynamic analysis reveals the spontaneity, endothermic nature, and orderly progression of the adsorption process. Remarkably, the adsorbent with 0.1 g•L-1 boasts an impressive maximum adsorption capacity of 1756.19 mg•g-1 for CR at 298.15 K, establishing its competitive advantage. The reuse of the adsorbent over 5 cycles remains 78% of the initial adsorption. The CR adsorption mechanisms were elucidated, emphasizing the roles of π-π interactions, electrostatic forces, hydrogen bonding, and metal coordination. Comparison with other dyes, such as methylene blue (MB) and methyl orange (MO), and exploration of adsorption performance in binary dye systems, demonstrates the superior capacity and selectivity of this adsorbent for CR. In conclusion, our magnetically separable metal-organic framework (MOF)based composite presents a versatile and effective solution for CR removal, with promising applications in water treatment and environmental remediation.

Efficient Photocatalytic Degradation of Congo Red Dye Using Facilely Synthesized and Characterized MgAl2O4 Nanoparticles

The discharge of congo red dye into water sources by factories has been associated with a range of health concerns, such as cancer, redness, skin irritation, and allergic reactions. As a result, this research focused on the cost-effective and straightforward production of MgAl2O4 nanoparticles by using the Pechini sol-gel process. Subsequently, these nanoparticles were employed for the successful photocatalytic decomposition of congo red dye. Moreover, extensive characterization of the fabricated MgAl2O4 nanoparticles was conducted through diverse methodologies, which included Fourier-transform infrared spectroscopy, ultraviolet-visible spectrophotometry, high-resolution transmission electron microscopy (HR-TEM), field-emission scanning electron microscopy (FE-SEM), and powder X-ray diffraction (XRD). Furthermore, the XRD analysis disclosed that the average crystal size of the produced MgAl2O4 nanoparticles is 10.36 nm, and their optical energy gap was determined to be 3.71 eV. The FE-SEM examination unveiled a combination of spherical and disorganized structures with a 0.14 μm average grain size. HR-TEM analysis, in turn, revealed that the fabricated MgAl2O4 nanoparticles were composed of minuscule spherical particles with an average diameter of 8.75 nm. The maximum degradation of 50 mL of congo red dye at a concentration of 25 mg/L reached 99.27% within 80 min at a pH of 3. Additionally, the findings confirmed the consistent decomposition activity toward congo red dye even after four cycles, thereby validating the effectiveness and reusability of the MgAl2O4 nanoparticles that were developed in this study.

A comprehensive review on the application of semiconducting materials in the degradation of effluents and water splitting

In this comprehensive review article, we delve into the critical intersection of environmental science and materials science. The introduction sets the stage by emphasizing the global water shortage crisis and the dire consequences of untreated effluents on ecosystems and human health. As we progress into the second section, we embark on an intricate exploration of piezoelectric and photocatalytic principles, illuminating their significance in wastewater treatment and sustainable energy production. The heart of our review is dedicated to a detailed analysis of the detrimental impacts of effluents on human health, underscoring the urgency of effective treatment methods. We dissected three key materials in the realm of piezo-photocatalysis: ZnO-based materials, BaTiO3-based materials, and bismuth-doped materials. Each material is scrutinized for its unique properties and applications in the removal of pollutants from wastewater, offering a comprehensive understanding of their potential to address this critical issue. Furthermore, our exploration extends to the realm of hydrogen production, where we discuss various types of hydrogen and the role of piezo-photocatalysis in generating clean and sustainable hydrogen. By illuminating the synergistic potential of these advanced materials and technologies, we pave the way for innovative solutions to the pressing challenges of water pollution and renewable energy production. This review article not only serves as a valuable resource for researchers and scholars in the fields of material science and environmental engineering but also underscores the pivotal role of interdisciplinary approaches in addressing complex global issues.

Microbial biodegradation of recalcitrant synthetic dyes from textile-enriched wastewater by Fusarium oxysporum

The present study reported the improvement of biological treatment for the removal of recalcitrant dyes including aniline blue, reactive black 5, orange II, and crystal violet in contaminated water. The biodegradation efficiency of Fusarium oxysporum was significantly enhanced by the addition of mediators and by adjusting the biomass density and nutrient composition. A supplementation of 1% glucose in culture medium improved the biodegradation efficiency of aniline blue, reactive black 5, orange II, and crystal violet by 2.24, 1.51, 4.46, and 2.1 folds, respectively. Meanwhile, the addition of mediators to culture medium significantly increased the percentages of total removal for aniline blue, reactive black 5, orange II, and crystal violet, reaching 86.07%, 68.29%, 76.35%, and 95.3%, respectively. Interestingly, the fungal culture supplemented with 1% remazol brilliant blue R boosted the biodegradation up to 97.06%, 89.86%, 91.38%, and 86.67% for aniline blue, reactive black 5, orange II, and crystal violet, respectively. Under optimal culture conditions, the fungal culture could degrade these synthetic dyes concentration up to 10⁴ mg/L. The present study demonstrated that different recalcitrant dye types can be efficiently degraded using microorganism such as F. oxysporum.

Characterization and photocatalytic activity of CoCr2O4/g-C3N4 nanocomposite for water treatment

One of the materials that has recently been used to remove environmental pollution from industrial effluents with photocatalytic technology is cobalt chromate (CoCr₂O₄) nanoparticles. An effective way to improve the photocatalytic properties of materials is to composite them with other photocatalysts to prevent recombination of electron-holes and accelerate the transfer of oxidation/reduction agents. Graphitic carbon nitride (g-C₃N₄) is an excellent choice due to its unique properties. In this research, CoCr₂O₄ and its composite with g-C₃N₄ (5, 10, and 15%) were synthesized by polyacrylamide gel method and characterized by X-ray diffraction, scanning electron microscopy, FTIR, UV-Vis spectroscopy techniques. The photocatalytic behavior of synthesized nanoparticles was investigated in the degradation process of methylene blue dye. The results showed that the composite samples have higher efficiency in photocatalytic activity than the pure CoCr₂O₄ sample. Using CoCr₂O₄-15 wt%g-C₃N₄ nanocomposite, after 80 min, methylene blue was completely degraded. The mechanism of degradation by CoCr₂O₄-g-C₃N₄ nanocomposite was the superoxide radical produced by the reaction of electrons with oxygen absorbed on the catalyst surface, as well as optically produced holes directly.

Carbon-Based Nanomaterials for Catalytic Wastewater Treatment: A Review

Carbon-based nanomaterials (CBM) have shown great potential for various environmental applications because of their physical and chemical properties. The unique hybridization properties of CBMs allow for the tailored manipulation of their structures and morphologies. However, owing to poor solar light absorption, and the rapid recombination of photogenerated electron-hole pairs, pristine carbon materials typically have unsatisfactory photocatalytic performances and practical applications. The main challenge in this field is the design of economical, environmentally friendly, and effective photocatalysts. Combining carbonaceous materials with carbonaceous semiconductors of different structures results in unique properties in carbon-based catalysts, which offers a promising approach to achieving efficient application. Here, we review the contribution of CBMs with different dimensions, to the catalytic removal of organic pollutants from wastewater by catalyzing the Fenton reaction and photocatalytic processes. This review, therefore, aims to provide an appropriate direction for empowering improvements in ongoing research work, which will boost future applications and contribute to overcoming the existing limitations in this field.