Solar light driven degradation of textile dye contaminants for wastewater treatment - studies of novel polycationic selenide photocatalyst and process optimization by response surface methodology desirability factor

Photo-transformation of ofloxacin in natural aquatic conditions: Impact of indirect photolysis on the product profile and transformation mechanism

The natural phototransformation of organic pollutants in the environment depends on several water constituents, including inorganic ions, humic substances, and pH. However, the literature information concerning the influence of various water components on the amount of phototransformation and their impact on the development of various transformation products (TPs) is minimal. This study investigated the phototransformation of ofloxacin (OFL), a fluoroquinolone antibiotic, in the presence of various water components such as cations (K+, Na+, Ca2+, NH4+, Mg2+), anions (NO3-, SO42-, HCO3-, CO32-, PO43-), pH, and humic substances when exposed to natural sunlight. The study reveals that neutral pH levels (0.39374 min⁻1) enhance the phototransformation of OFL in aquatic environments. Carbonate, among anions, shows the highest rate constant (2.89966 min⁻1), significantly influencing OFL phototransformation, while all anions exhibit a notable impact. In aquatic environments, indirect phototransformation of OFL, driven by increased reactive oxygen species, expedites light-induced reactions, potentially enhancing OFL phototransformation. A clear difference was visible in the type of transformation products (TPs) formed during direct and indirect photolysis. The impact of indirect photolysis in the product profile was evaluated by examining the unique properties of TPs in direct and indirect photolysis. The primary transformation products were generated by oxidation and cleavage processes directed towards the ofloxacin piperazinyl, oxazine, and carboxyl groups. The toxicity assessment of TPs derived from OFL revealed that among the 26 identified TPs, TP3 (demethylated product), TP7 and TP8 (decarboxylated products), and TP15 (piperazine ring cleaved product) could potentially have some toxicological effects. These findings suggest that the phototransformation of OFL in the presence of various water components is necessary when assessing this antibiotic's environmental fate.

Developing In2S3 upon modified MgTiO3 anchored on nitrogen-doped CNT for sustainable sensing and removal of toxic insecticide clothianidin

Herein, the study introduces a novel bifunctional In2S3/MgTiO3/TiO2@N-CNT (IMTNC) nanocomposite, which is poised to revolutionize the detection and removal of clothianidin (CLD) from aquatic environments by synergistic adsorption and photodegradation. Confirmation of the material's synthesis was done using structural, optical, morphological, and chemical characterizations. An outstanding sensitivity of 2.168 μA/nM.cm2 with a linear range of 4-100 nM and a LOD of 0.04 nM, along with an exceptional elimination efficiency of 98.06 ± 0.84% for about 10 ppm CLD within 18 min was demonstrated by the IMTNC nanocomposite. Extensive studies were carried out to appraise the material's effectiveness in the presence of various interfering species, such as cations, anions, organic compounds, and different water matrices, and a comprehensive assessment of its stability throughout several cycles was made. Response Surface Methodology (RSM) study was used to determine the ideal removal conditions for improved performance. In addition, the catalytic performance in removing various other pollutants was also analyzed. Adding In2S3 and developing N-doped Carbon Nanotubes (N-CNT) increased conductivity and higher electrochemical sensing skills, improving charge transfer and increasing photocatalytic activity. This research underscores the potential of the IMTNC nanocomposite as a promising candidate for advanced environmental sensing and remediation applications.

Humic substances mediated superior photochemical pollutant conversion on defective TiO2 in environmentally relevant matrices: The key roles of oxygen vacancy in surface interactions, oxidant activation and radical generation

Ubiquitous humic substances usually exhibit strong interfering effects on target pollutant removal in advanced water purification. This work aims to develop a photochemical conversion system on the nonstoichiometric TiO2 for pollutant removal in environmentally relevant matrices. In this synergistic reaction system, the redox-reactive humic substances and defective oxygen vacancies can serve as the organic electron transfer mediator and the key surface reactive sites, respectively. This system achieves a superior pollutant degradation in real surface water at low oxidant concentrations. Reactive oxygen vacancies on the TiO2 surface and sub-surface are of considerable interest for this photochemical reaction system. By engineering defective oxygen vacancies on high-energy {001} polar facet, the surface and electronic interactions between tailored TiO2 and humic substances are greatly strengthened for the promoted electron transfer and oxidant activation. Rendered by the strong surface affinity and molecular activation, defective oxygen vacancies thermodynamically and dynamically promote reactive chain reactions for free radical formation, including the selective O2 reduction to ·O2- and the H2O2 activation to ·OH. Our findings take new insights into environmental geochemistry, and provide an effective strategy to in-situ boost the humic substances-mediated water purification without secondary pollution. ENVIRONMENTAL IMPLICATION: Humic substances are widely distributed in aquatic environment, thus playing important roles in environmental geochemistry. For example, humic substances can achieve good surface adsorption through electrostatic adsorption, ligand exchange and electronic interactions with typical TiO2 to form reactive ligand-metal charge transfer complexes for pollutant degradation. Inspired by the unique properties of surface and sub-surface oxygen vacancies, the defective TiO2 was designed to refine the humic substances-mediated photochemical reactions. A superior reactivity was measured for pollutant degradation. Our findings provide an effective strategy to boost naturally photochemical decontamination in environmentally relevant matrices.

Degradation of Procion brilliant yellow H-E6G using ultrasonic and hydrodynamic cavitation combined with oxidants with demonstration at pilot scale

The current study focuses on the degradation of Procion brilliant yellow H-E6G, an azo dye, using ultrasonic and hydrodynamic cavitation (HC), evaluating the impact of various parameters on the extent of degradation. The use of only ultrasound showed less oxidation capacity as indicated by only 19.1% degradation at an optimized power of 140 W, pH of 2.5, temperature of 40°C, and initial dye concentration of 15 ppm. The effectiveness of hybrid approaches involving US + H2 O2 , US + Fenton, and US + H2 O2  + potassium persulfate (KPS) was subsequently evaluated under optimized conditions. A notable enhancement in decolorization extent was observed for combined operations, including US + H2 O2 , US + Fenton, and US + H2 O2  + KPS (dual oxidant scheme) with the actual decolorization extents as 80.6%, 85%, and 92.2% respectively. An optimized scheme of US + H2 O2  + KPS was also utilized to decolorize the dye at a pilot scale using a US flow cell and also an HC reactor that yielded 91.8% and 88% reductions in initial concentration. The dye decolorization was elucidated to follow first-order kinetics for all the individual and combination approaches. The obtained values of the rate constants were also utilized for the evaluation of the synergistic index. A toxicity analysis was also performed on the dye, both before and following treatment, utilizing two bacterial strains. A comparative analysis of various treatment approaches has been presented focusing on factors such as cavitational yield, operational expenses, and energy requirements. The study elucidated that the combination of US + H2 O2  + KPS effectively removes Procion brilliant yellow H-E6G giving 92.2% as the maximum degradation at an operating cost of 0.1862 $/L. PRACTITIONER POINTS: First depiction of cavitative degradation of Procion brilliant yellow H-E6G Optimizing the equipment operating parameters and chemical oxidants Demonstration of optimized treatment scheme at pilot scale Evaluation of various approaches based on synergy and costs of treatment US + H2 O2  + KPS is the best approach for dye degradation.

Optimization of operational parameters using RSM, ANN, and SVM in membrane integrated with rotating biological contactor

Membrane fouling is a critical bottleneck to the widespread adoption of membrane separation processes. It diminishes the membrane permeability and results in high operational energy costs. The current study presents optimizing the operating parameters of a novel rotating biological contactor (RBC) integrated with an external membrane (RBC + ME) that combines membrane technology with an RBC. In the RBC + ME, the membrane panel is placed external to the bioreactor. Response surface methodology (RSM) is applied to optimize the membrane permeability through three operating parameters (hydraulic retention time (HRT), rotational disk speed, and sludge retention time (SRT)). The artificial neural networks (ANN) and support vector machine (SVM) are implemented to depict the statistical modelling approach using experimental data sets. The results showed that all three operating parameters contribute significantly to the performance of the bioreactor. RSM revealed an optimum value of 40.7 rpm disk rotational speed, 18 h HRT and 12.4 d SRT, respectively. An ANN model with ten hidden layers provides the highest R2 value, while the SVM model with the Bayesian optimizer provides the highest R2. RSM, ANN, and SVM models reveal the highest R-square values of 0.97, 0.99, and 0.99, respectively. Machine learning techniques help predict the model based on the experimental results and training data sets.

Green conversion of waste PET into magnetic Ni0·4Fe2·6O4/(Fe,Ni)@carbon nanostructure for adsorption and separation of dyes from aqueous media

A nanostructured core-shell composite (Ni0·4Fe2·6O4/(Fe,Ni)@carbon, NFC) comprising magnetic nano-cores encapsulated with graphitic shells (≈80 wt%) is prepared by facile and clean mechanochemical-molten salt processing approach using waste PET; providing a specific surface area of 201.9 m2 g-1, well-developed mesopores, and ferromagnetic behavior characterized by the coercivity value of 149 Oe. NFC is utilized as a high-performance adsorbent for the removal of organic dyes from their aqueous solutions. Moreover, the magnetic performance of NFC enables the facile collection of the exhausted adsorbent out of the purified water. Performances of NFC for the removal of crystal violet dye (CV), methyl orange (MO) and rhodamine B (Rh B) from their aqueous solutions are systematically investigated under different environmental conditions including the adsorbent dosage and dye concentration, as well as the solution pH and temperature, where an impressive CV removal capacity of 201.6-243.8 mg g-1 is recorded for a wide pH range of 2-10. Mechanism and kinetics involved in the adsorption process are investigated by studying the adsorption isotherms and thermodynamics. The dye adsorption of the nanocomposite material is confirmed to follow the pseudo-second-order kinetic model combined with the Langmuir isotherm model, exhibiting an excellent spontaneous and exothermic monolayer adsorption capacity of around 153 mg g-1 (for MO) for the fresh adsorbent and around 89 mg g-1 after three adsorption-regeneration cycles.

Synthesis of Pr3+-doped WO3 particles: correlation between photoluminescent and photocatalytic properties

The WO3 and WO3:Pr3+ particles were successfully synthesized by the co-precipitation method. The XRD analysis with Rietveld refinement revealed the formation of a monoclinic phase for WO3 and for doped samples, this result was later confirmed by Raman spectroscopy studies. The presence of Pr3+ in the WO3 crystalline lattice induced structural and optical changes in the particles, increasing the crystallite size, distorting the clusters (shortening of the W-O bonds), favoring the crystallinity and changing the optical gap. The predominant morphology of the particles of WO3 and WO3:Pr3+ obtained was nanocubes constituted by the superposition of plates of nanometric thicknesses. The photoluminescence of WO3 and WO3:Pr3+ was produced by the existence of surface defects in the particles. The increase in the concentration of Pr3+ promoted an increase in the intensity of PL, due to the increase in the rate of recombination of electron/hole charges. The WO3 sample exhibited emission in the white region due to the adjustment of simultaneous electronic transitions in the blue, green and red regions, characteristic of the broadband spectrum. The interval of the 2.65 eV gap band and the high efficiency in the separation of the photogenerated charges (e-/h+) with the low recombination rate contributed to the photocatalytic degradation of Crystal Violet (CV) by the catalyst. The WO3:4% Pr3+ sample showed the best photocatalytic efficiency, degrading 73% of the CV dye in 80 minutes. This result was associated with a reduction in particle size and density of oxygen vacancies on the material surface.

Preparation and characterization of single perovskite microplates and its sunlight assisted photodecolorization activity, validated by response surface methodology

Perovskites overtaking simple metal oxides as solar light harvesting material due to their excellent photocatalytic efficiency and superior stability. An efficient visible light responsive, K₂Ba_0.3Cu_0.7O₃ single perovskites oxides (SPOs) photocatalyst was fabricated by a facile hydrothermal method. The fabricated SPOs was characterized by various techniques. SEM analysis confirm the cubic morphology of SPOs, the average length and diameter of SPOs were 27.84 and 10.06 μm calculated from SEM images. FT-IR analysis confirmed the presence of M-M and M - O bonds. EDX showed prominent peaks of the constituent elements. The average crystallite size of SPOs calculated by Scherrer and Williamson-Hall equation was 14.08 and 18.47 nm respectively. The optical band gap value lies in visible region of spectrum (2.0 eV) determined from the Tauce's plot. The fabricated SPOs was applied for photocatalytic degradation of methylene blue (MB) dye. Maximum degradation 98.09% of MB was achieved at 40 min irradiation time, 0.01 g catalyst dose, 60 mg L^-1 MB concentration and pH 9. The photocatalytic degradation of MB follows first order kinetic. RSM modeling of MB removal was also caried out. Reduce quadratic model was best fitted model having F-value = 300.65, P-value = < 0.0001,R² = 0.9897, predicted R² = 0.9850 and adjusted R² = 0.9864.

Recent advances in synthesis, structural properties, and regulation of nickel sulfide-based heterostructures for environmental water remediation: an insight review

Heterostructured nanomaterials exhibit pronounced potential in environmental science, including the water purification, pollutant monitoring, and environmental remediation. Especially, their application through advanced oxidation processes has been found capable and adaptable in waste water treatment. In semiconductor photocatalysts, metal sulfides are the leading materials. However, for further modifications, the progresses on specific materials need to be overviewed. Among metal sulfides, nickel sulfides are the emerging semiconductors due to relatively narrow band gaps, high thermal and chemical stability, and cost effectiveness. The aim of the present review is to conduct a thorough analysis and summary of recent progress in the application of nickel sulfide-based heterostructures in water decontamination. Initially, the review introduces the emerging needs of the materials for environment following the characteristics features of metal sulfides with emphasis on nickel sulfides. Subsequently, synthesis strategies and structural properties of nickel sulfide (NiS and NiS₂)-based photocatalysts are discussed. Herein, controlled synthesis procedures to influence their active structure, compositions, shape, and size for the enhanced photocatalytic performances are also considered. Furthermore, there is discussion on heterostructures formed by metal modification, metal oxides, and carbon hybridized nanocomposites. In the continuation, the modified characteristics are investigated which favors the photocatalytic processes for degradation of organic contaminations in water. The overall study highlights significant improvements in degradation efficiency of hetero-interfaced NiS and NiS₂ photocatalysts towards organics that are comparable to expensive noble-metal photocatalysts. Finally, we also added a little on prospects for future advancement of nickel sulfide-based photocatalysts for applications in sustainable environmental remediation.