Integrated adsorption and photocatalytic degradation based removal of ciprofloxacin and sulfamethoxazole antibiotics using Fc@rGO-ZnO nanocomposite in aqueous systems

Understanding the variations in degradation pathways and generated by-products of antibiotics in modified TiO2 and ZnO photodegradation systems: A comprehensive review

This review examines various modification techniques, including metal doping, non-metal doping, multi doping, mixed doping, and the construction of heterojunction photocatalysts, for enhancing the performance of pure TiO2 and ZnO in the photodegradation of antibiotics. The study finds that mixed and multi doping approaches are more effective in improving photodegradation performance compared to single doping. Furthermore, the selection of suitable semiconductors for constructing heterojunction photocatalysts is crucial for achieving an efficient charge carrier separation. The environmental impacts, recent research, and real application of photocatalysis process have been discussed. The review also investigates the impact of operating parameters on the degradation pathways and the generation of by-products for different antibiotics. Additionally, the toxicity of the by-products resulting from the photodegradation of antibiotics using modified ZnO and TiO2 photocatalysts is explored, revealing that these by-products may exhibit higher toxicity than the original antibiotics. Consequently, to enable the widespread implementation of photodegradation systems, researchers should focus on optimizing degradation systems to control the conversion pathways of by-products, developing innovative photoreactors, and evaluating toxicity in real wastewater matrices.

Light-driven photocatalysis as an effective tool for degradation of antibiotics

Antibiotic contamination has become a severe issue and a dangerous concern to the environment because of large release of antibiotic effluent into terrestrial and aquatic ecosystems. To try and solve these issues, a plethora of research on antibiotic withdrawal has been carried out. Recently photocatalysis has received tremendous attention due to its ability to remove antibiotics from aqueous solutions in a cost-effective and environmentally friendly manner with few drawbacks compared to traditional photocatalysts. Considerable attention has been focused on developing advanced visible light-driven photocatalysts in order to address these problems. This review provides an overview of recent developments in the field of photocatalytic degradation of antibiotics, including the doping of metals and non-metals into ultraviolet light-driven photocatalysts, the formation of new semiconductor photocatalysts, the advancement of heterojunction photocatalysts, and the building of surface plasmon resonance-enhanced photocatalytic systems.

Recent progresses in synthesis and modification of g-C3N4 for improving visible-light-driven photocatalytic degradation of antibiotics

Graphitic carbon nitride (g-C3N4) is a widely studied visible-light-active photocatalyst for low cost, non-toxicity, and facile synthesis. Nonetheless, its photocatalytic efficiency is below par, due to fast recombination of charge carriers, low surface area, and insufficient visible light absorption. Thus, the research on the modification of g-C3N4 targeting at enhanced photocatalytic performance has attracted extensive interest. A considerable amount of review articles have been published on the modification of g-C3N4 for applications. However, limited effort has been specially contributed to providing an overview and comparison on available modification strategies for improved photocatalytic activity of g-C3N4-based catalysts in antibiotics removal. There has been no attempt on the comparison of photocatalytic performances in antibiotics removal between modified g-C3N4 and other known catalysts. To address these, our study reviewed strategies that have been reported to modify g-C3N4, including metal/non-metal doping, defect tuning, structural engineering, heterostructure formation, etc. as well as compared their performances for antibiotics removal. The heterostructure formation was the most widely studied and promising route to modify g-C3N4 with superior activity. As compared to other known photocatalysts, the heterojunction g-C3N4 showed competitive performances in degradation of selected antibiotics. Related mechanisms were discussed, and finally, we revealed current challenges in practical application.

Sandwich-type immunosensor based on aminated 3D-rGOF-NH2 and CMK-3-Fc-MgAl-LDH multilayer nanocomposites for detection of CA125

Cancer antigen 125 (CA125)1 is the most important biological screening indicator used to monitor epithelial ovarian cancers, and it plays a vital role in distinguishing ovarian cancers from benign diseases. Biosensors show great potential in the analysis and detection of disease markers. In this study, we designed electrochemical sensors based on three-dimensional amino-functionalized reduced graphene oxide (3D-rGOF-NH2),2 MgAl layered double hydroxide nanocomposites containing ordered mesoporous carbon (CMK-3),3 and ferrocene carboxylic acids（Fc-COOH）4for the detection of CA125. 3D-rGOF-NH2 possesses good conductivity, a large surface area, and high porosity, enabling more immobilized nanoparticles to be deposited on its surface with excellent stability. CMK-3@Fc@MgAl-LDH nanocomposite was used as a carrier to enhance the immobilization of antibodies and the loading of Fc, conductors to enhance conductivity, and enhancers to gradually amplify the signal of Fc. The surface morphology, elemental composition, and surface groups of the materials were characterized using scanning electron microscopy (SEM),5 transmission electron microscopy (TEM),6 and X-ray diffraction (XRD)7 techniques. The response signal of the electrochemical sensor was measured by DPV. Under the optimal conditions, the electrochemical sensor obtained a linear detection range of 0.01 U/mL-100 U/mL with a detection limit of 0.00417 U/mL.

ZnO-Ti3C2TX composites supported on polyacrylic acid/chitosan hydrogels as high-efficiency and recyclable photocatalysts for norfloxacin degradation

Photocatalysts immobilized on hydrogels is a win-win mode, which not only improves photocatalysis but also successfully prevents catalyst loss, making it easy to separate and reuse during catalytic process. Here, ZnO-Ti3C2TX photocatalysts are loaded into the chitosan/polyacrylic acid hydrogel networks, realizing the efficiently photocatalytic degradation of norfloxacin. The chitosan-based composite hydrogel features rich functional groups and a dense pore structure, which is beneficial to antibiotic enrichment and photocatalytic degradation. The effects of different catalyst ratios, dosage, initial concentrations and pH on the degradation efficiency are investigated. The norfloxacin degradation rate constant is 0.012 min-1 and its degradation efficiency reaches up to 90 % after 240 min. Importantly, the photocatalytic composite hydrogel still retains 85 % degradation efficiency after 6 cycles. Moreover, e- plays a significant role in the degradation process. This work converts the traditional powder photocatalysts into bulk photocatalysts (photocatalytic hydrogels) to accomplish efficient degradation and rapid recycling for contaminant removal.

ZnO-based heterojunction catalysts for the photocatalytic degradation of methyl orange dye

In this study, a variety of ZnO-based heterojunctions with disparate wt.% doping of WO3 and BiOI have been prepared for the photodestruction of methyl orange (MO) dye in aqueous solution. The composites were analysed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, optical studies, and nitrogen adsorption-desorption isotherms. The SEM images revealed non-uniform surfaces of the ZnO-BiOI based composites while mostly nodular morphology was observed for all three samples of ZnO-WO3. As the WO3 loading increased, more clustering was detected. The analysed samples exhibited characteristic peaks representative of the triclinic phase of WO3 and the hexagonal wurtzite structure of ZnO, while the diffractogram observed from the materials displayed distinct peaks corresponding to the crystalline phases of both BiOI and ZnO in their pure forms. Further evidence of the samples' characteristics includes the presence of distinct crystalline patterns without any impurity peaks, a red shift in the absorption spectra of the heterostructure, the detection of only the reference elements, and mostly Type IV isotherm adsorption. This study identified the ZnO-[10%]BiOI and ZnO-[10%]WO3 heterojunctions as the best performing photocatalysts, as MO was completely destroyed in 120 and 90 min, respectively. Thus, confirming 10% wt. as the optimal doping concentration for the best photo-activity in this study. The impact of varying process parameters demonstrates that at an elevated photocatalyst mass of 40 mg, both heterojunctions effectively degraded MO. The photodegradation efficiency of MO was more pronounced in strong acidic conditions (pH 2) when compared to high alkaline conditions (pH 11) for the ZnO-[10%]BiOI heterostructure. However, a decrease in performance was observed for both strong acidic and high alkaline pH values when the ZnO-[10%]WO3 heterostructure was applied. The kinetic analysis of the photodegradation study reveals that all the photodegradation experiments can be represented by the pseudo-first-order kinetic model. The findings from this investigation propose that the ZnO-[10%]BiOI heterojunction photocatalyst holds significant potential for the effective treatment of dye-contaminated wastewater.

Ultrasound-based advanced oxidation processes for landfill leachate treatment: Energy consumption, influences, mechanisms and perspectives

Advanced oxidation processes (AOPs) based on ultrasound (US) have attracted considerable attention in recent years due to its advantages in the degradation of landfill leachate. The review summarizes the existing treatment methods of leachate from lab-scale, compares their advantages and disadvantages by focusing on the degradation of emerging contaminants (ECs) in the leachate. Then the US-based AOPs are introduced emphatically, including their degradation mechanisms, influencing factors, energy consumption, further optimization methods as well as the possibility of field-scale application are systematically described. Moreover, this review also expounds on the advantages of dual-frequency US (DFUS) technology compared with single-frequency US, and a theoretically feasible DFUS process is proposed to treat ECs in the leachate. Finally, suggestions and prospects for US technologies in treating landfill leachate are put forward to aid future research on landfill leachate treatment. Meaningfully, this manuscript will provide reference values of US-based technologies in landfill leachate treatment for the practical use, facilitating the development of US-based AOPs in landfill leachate management and disposal.