Oily bilge water treatment using indigenous soil bacteria: Implications for recycling the treated sludge in vegetable farming

Advancements in bilge wastewater treatment: A review for current and future trends

Bilge wastewater (BW) from ships poses a significant threat to coastal ecosystems due to its recalcitrant nature. BW is mainly composed of organic hydrocarbons and oils together with surfactants, heavy metals, and other organic compounds but oil is the sole compound regulated by international law with a discharge limit of 15 mg/L. Therefore, BW treatment is a crucial aspect of marine pollution control and environmental protection. In this sense, BW must be treated on board or shipped to treatment plants on land. While conventional methods like gravity separation and adsorption have been used to treat BW, their inability to effectively treat complex mixtures has encouraged researchers to investigate advanced alternatives. Thus, new, cost-efficient, and sustainable technologies to treat BW are required such as those based on biological approaches. Moreover, integrating bio-based methods with existing technologies can provide comprehensive and eco-friendly treatment solutions. This review compiles various documents published regarding the treatment of BW, pointing out the necessity of developing new cost-efficient and environmentally friendly approaches to treat it. To the best knowledge of the authors this is the first comprehensive review on this very latest topic. Therefore, this review will be a significant contribution to the literature in terms of conservation of the environment, reduction in water pollution, and protection of the marine ecosystems.

Bacterial Degradation of Petroleum Hydrocarbons in Saudi Arabia

The Kingdom of Saudi Arabia (KSA) is the leading oil-exploring and -exploiting country in the world. As a result, contamination of the environment by petroleum products (mainly hydrocarbons) is common, necessitating strategies for their removal from the environment. Much work has been conducted on bacterial degradation of hydrocarbons in the KSA. This review comprehensively analyzed 43 research investigation articles on bacterial hydrocarbon degradation, mainly polyaromatic hydrocarbons (PAHs) within the KSA. More than 30 different bacterial genera were identified that were capable of degrading simple and complex PAHs, including benzo[a]pyrene and coronene. Different strategies for selecting and isolating these bacterial strains and their advantages and disadvantages were highlighted. The review also discussed the origins of sample inocula and the contributions of various research groups to this field. PAH metabolites produced by these bacteria were presented, and biochemical pathways of PAH degradation were proposed. More importantly, research gaps that could enrich our understanding of petroleum product biodegradation mechanisms were highlighted. Overall, the information presented in this paper will serve as a baseline for further research on optimizing bioremediation strategies in all petroleum-contaminated environments.

Tannery effluent treatments with mangrove fungi, grass root biomass, and biochar

Tannery effluents contain high amounts of polluting chemicals, such as salts and heavy metals released often to surface waters. New economic and eco-friendly purification methods are needed. Two adsorbing materials and five salt-tolerant fungal isolates from mangrove habitat were studied. Purification experiments were carried out using the pollutant adsorbents biochar and the biomass of vetiver grass (Chrysopogon zizanioides) roots and the fungi Cladosporium cladosporioides, Phomopsis glabrae, Aspergillus niger, Emericellopsis sp., and Scopulariopsis sp., which were isolated from mangrove sediment. They efficacy to reduce pollutants was studied in different combinations. Salinity, turbidity, total dissolved solids, total suspended solids, phenols, nitrogen, ammonia. Biological and chemical oxygen demand (BOD, COD) and several heavy metals were measured. The adsorbents were efficient reducing the pollutants to 15-50% of the original. The efficiency of the combination of biochar and roots was generally at the same level as the adsorbents alone. Some pollutants such as turbidity, COD and ammonium were reduced slightly more by the combination than the adsorbents alone. From all 14 treatments, Emericellopsis sp. with biochar and roots appeared to be the most efficient reducing pollutants to < 10-30%. BOD and COD were reduced to ca 5% of the original. The treatment was efficient in reducing also heavy metals (As, Cd, Cr, Mn Pb, Zn). The fungal species originating from the environment instead of the strains present in the tannery effluent reduced pollutants remarkably and the adsorbents improved the reduction efficiency. However, the method needs development for effluents with high pollutant concentrations to fulfil the environmental regulations.

Improving Tannery Wastewater Treatments Using an Additional Microbial Treatment with a Bacterial-Fungal Consortium

Environmental pollutants such as toxic heavy metals and oxygen-demanding solids are generated by leather manufacturing. In most tanneries, wastewaters are treated with physico-chemical methods but overly high levels of pollutants remain in surface waters. The efficiency of tanning wastewater treatment with conventional techniques was evaluated in four tanneries in Saudi Arabia. It was observed that the wastewaters contained high amounts of pollutants, needing further treatment. We isolated microorganisms from the wastewaters and carried out experiments to treat the effluents with different bacteria, fungi, and their consortia. We hypothesized that a consortium of microorganisms is more efficient than the single microorganisms in the consortium. The efficiency of five single bacterial and five fungal species from different genera was tested. In a consortium experiment, the efficiency of nine bacterial-fungal consortia was studied. The bacterium Corynebacterium glutamicum and the fungus Acremonium sp. were the most efficient in the single-microbe treatment. In the consortium treatment, the consortium of these two was the most efficient at treating the effluent. The factory wastewater treatment reduced total dissolved solids (TDS) from 1885 mg/L to 880 mg/L. C. glutamicum treatment reduced TDS to 150 mg/L and Acremonium sp. to 140 mg/L. The consortium of these two reduced TDS further to 80 mg/L. Moreover, the factory treatment reduced BOD from 943 mg/L to 440 mg/L, C. glutamicum to 75 mg/L, and Acremonium sp. 70 mg/L. The consortium reduced BOD further to 20 mg/L. The total heavy-metal concentration (Cd, Cr, Cu, Mn, and Pb) was reduced by the factory treatment from 43 μg/L to 26 μg/L and by the consortium to 0.2 μg/L. The collagen concentration that was studied using hydroxyproline assay decreased from 120 mg/L to 39 mg/L. It was shown that the consortium of the bacterium C. glutamicum and the fungus Acremonium sp. was more efficient in reducing the pollutants than the single species. The consortium reduced almost all parameters to below the environmental regulation limit for wastewater discharge to the environment in Saudi Arabia. The consortium should be studied further as an additional treatment to the existing conventional tannery wastewater treatments.