Influence of temperature on dynamic surface properties of spread DPPC monolayers in a broad range of surface pressures

Spontaneous nanotube formation of an asymmetric glycolipid

Over the past decades, advances in lipid nanotechnology have shown that self-assembled lipid structures providing ease of preparation, chemical stability, and biocompatibility represent a landmark on the development of multidisciplinary technologies. Lipid nanotubes (LNTs) are a unique class of lipid self-assembled structures, bearing unique properties such as high-aspect ratio, tunable diameter size, and precise molecular recognition. They can be obtained either by the action of external factors to already formed vesicles or spontaneously, the latter depending strongly on subtle molecular features. Here, we report on the spontaneous formation of supported lipid nanotubes of a particular type of glycolipid, ohmline, whose hydrophobic core displays remarkable asymmetry. The combination of bulk and surface-sensitive techniques indicates that below its main transition, ohmline displays an interdigitated gel phase, likely driven by the unique asymmetry in its hydrophobic core. Enhanced order packing by interdigitation favors the formation of ohmline nanotubes in agreement with chiral-based models of nanotube formation. The findings presented in this work call for additional studies to link lipid molecular structure-assembly relationships, whose understanding is relevant for the controlled design of lipid nanotubes networks in particular and controlled design of soft-matter nanomaterials in general.

Structural changes in layers of lipid mixtures at low surface tensions

Layers of pulmonary lipids on an aqueous substrate at non-equilibrium conditions can decrease the surface tension of water to quite low values. This is connected with different relaxation processes occurring at the interface and the associated changes in the surface layer structure. Results of measurements by the combination of methods like surface rheology, ellipsometry, Brewster angle microscopy, and IRRAS for spread layers of lipid mixtures open a possibility to specify the dynamics of structural changes at conditions close to the physiological state. At sufficiently low surface tension values (below 5 mN/m) significant changes in the ellipsometric signal were observed for pure DPPC layers, which can be related to a transition from 2D to 3D structures caused by the layer folding. The addition of other lipids can accelerate the relaxation processes connected with squeezing-out of molecules or multilayer stacks formation hampering thereby a decrease of surface tension down to low values corresponding to the folding of the monolayer.

Unraveling Complex Hysteresis Phenomenon in 1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine Monolayer: Insight into Factors Influencing Surface Dynamics

This study explores the hysteresis phenomenon in DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) monolayers, considering several variables, including temperature, compression and expansion rates, residence time, and subphase content. The investigation focuses on analyzing the influence of these variables on key indicators such as the π-A isotherm curve, loop area, and compression modulus. By employing the Langmuir-Blodgett technique, the findings reveal that all the examined factors significantly affect the aforementioned parameters. Notably, the hysteresis loop, representing dissipated energy, provides valuable insights into the monolayer's viscoelasticity, molecular packing, phase transition changes, and resistance during the isocycle process. These findings contribute to a comprehensive understanding of the structural and dynamic properties of DPPC monolayers, offering insights into their behavior under varying conditions. Moreover, the knowledge gained from this study can aid in the development of precise models and strategies for controlling and manipulating monolayer properties, with potential applications in drug delivery systems, surface coatings, as well as further investigation into air penetration into alveoli and the blinking mechanism.

Interfacial Dynamics of Adsorption Layers as Supports for Biomedical Research and Diagnostics

The input of chemical and physical sciences to life sciences is increasingly important. Surface science as a complex multidisciplinary research area provides many relevant practical tools to support research in medicine. The tensiometry and surface rheology of human biological liquids as diagnostic tools have been very successfully applied. Additionally, for the characterization of pulmonary surfactants, this methodology is essential to deepen the insights into the functionality of the lungs and for the most efficient administration of certain drugs. Problems in ophthalmology can be addressed using surface science methods, such as the stability of the wetting films and the development of artificial tears. The serious problem of obesity is fast-developing in many industrial countries and must be better understood, while therapies for its treatment must also be developed. Finally, the application of fullerenes as a suitable system for detecting cancer in humans is discussed.

Impact of Polymer Nanoparticles on DPPC Monolayer Properties

The application of surface rheology and Brewster angle microscopy on mixed monolayers of DPPC and polymeric nanoparticles (cationic and anionic) showed that the sign of the particle charge affects the dynamic properties of the monolayers less than the nanoparticles’ ability to aggregate. Under almost physiological conditions, the effect of nanoparticles on the elasticity of DPPC monolayer is insignificant. However, the particles prevent the surface tension from decreasing to extremely low values. This effect could affect the functionality of pulmonary surfactants.

Interaction between polyene antifungal drug and saturated phospholipid monolayer regulated by calcium ions at the air-water interface

Amphotericin B (AmB) is a polyene antifungal drug, which could directly form pores on the sterol-free phospholipid monolayers. The interaction between AmB and phospholipid can be affected by calcium ions, but the mechanism is still unclear. DPPC is a saturated phospholipid with -PC group, which is often used to simulate the outer cell membrane leaflet. And DPPC is also the main constituent of pulmonary surfactants. In this work, the DPPC monolayer was used as a model membrane to study the effect of calcium ions on the interaction between AmB and phospholipid. The influence of different concentration of calcium ions on the elastic modulus, mean molecular area increment, excess Gibbs free energy and stability of the AmB/DPPC mixed monolayer has been researched at the surface pressure of 7.5 mN/m, 12.5 mN/m and 22.5 mN/m. The AmB/DPPC monolayers at the air-water interface have been observed in real-time by Brewster angle microscope and the microstructure of the Langmuir-Blodgett monolayer films transferred onto the mica have been researched by scanning electron microscope and atomic force microscope. The results showed that calcium ions had a significant influence on the elastic modulus, mean molecular area increment, excess Gibbs free energy, stability and microstructure of the AmB/DPPC monolayer. It has been indicated that the influence of calcium ions on the interaction between AmB and DPPC molecules mainly depended on the effect of calcium ions on the orientation of AmB molecules. The calcium ions could regulate the effect of AmB to the stability of the DPPC monolayer. This regulatory role changed with the different concentrations of calcium ions and the different phase states of the monolayer. This work provides useful information to further understand the influence mechanism of calcium ions on the interaction between AmB and saturated phospholipid with -PC group, which is helpful to find out the effect mechanism of calcium ion on the interaction between AmB and the outer layer of cell membrane or pulmonary surfactants in different phase states and to understand the toxicity mechanism of AmB on the cell membrane or lungs.

Molecular and biophysical mechanisms behind the enhancement of lung surfactant function during controlled therapeutic hypothermia

Therapeutic hypothermia (TH) enhances pulmonary surfactant performance in vivo by molecular mechanisms still unknown. Here, the interfacial structure and the composition of lung surfactant films have been analysed in vitro under TH as well as the molecular basis of its improved performance both under physiological and inhibitory conditions. The biophysical activity of a purified porcine surfactant was tested under slow and breathing-like dynamics by constrained drop surfactometry (CDS) and in the captive bubble surfactometer (CBS) at both 33 and 37 °C. Additionally, the temperature-dependent surfactant activity was also analysed upon inhibition by plasma and subsequent restoration by further surfactant supplementation. Interfacial performance was correlated with lateral structure and lipid composition of films made of native surfactant. Lipid/protein mixtures designed as models to mimic different surfactant contexts were also studied. The capability of surfactant to drastically reduce surface tension was enhanced at 33 °C. Larger DPPC-enriched domains and lower percentages of less active lipids were detected in surfactant films exposed to TH-like conditions. Surfactant resistance to plasma inhibition was boosted and restoration therapies were more effective at 33 °C. This may explain the improved respiratory outcomes observed in cooled patients with acute respiratory distress syndrome and opens new opportunities in the treatment of acute lung injury.

Phase-Dependent Surfactant Transport on the Microscale: Interfacial Tension and Droplet Coalescence

Liquid-liquid emulsion systems are usually stabilized by additives, known as surfactants, which can be observed in various environments and applications such as oily bilgewater, water-entrained diesel fuel, oil production, food processing, cosmetics, and pharmaceuticals. One important factor that stabilizes emulsions is the lowered interfacial tension (IFT) between the fluid phases due to surfactants, inhibiting the coalescence. Many studies have investigated the surfactant transport behavior that leads to corresponding time-dependent lowering of the IFT. For example, the rate of IFT decay depends on the phase in which the surfactant is added (dispersed vs continuous) due in part to differences in the near-surface depletion depth. Other key factors, such as the viscosity ratio between the dispersed and continuous phases and Marangoni stress, will also have an impact on surfactant transport and therefore the coalescence and emulsion stability. In this feature article, the measurement techniques for dynamic IFT are first reviewed due to their importance in characterizing surfactant transport, with a specific focus on macroscale versus microscale techniques. Next, equilibrium isotherm models as well as dynamic diffusion and kinetic equations are discussed to characterize the surfactant and the time scale of the surfactant transport. Furthermore, recent studies are highlighted showing the different IFT decay rates and its long-time equilibrium value depending on the phase into which the surfactant is added, particularly on the microscale. Finally, recent experiments using a hydrodynamic Stokes trap to investigate the impact of interfacial surfactant transport, or "mobility", and the phase containing the surfactant on film drainage and droplet coalescence will be presented.

In honor to Ramón G. Rubio on the occasion of his 65th birthday

This Honorary Note is dedicated to the 65th birthday of Ramón G. Rubio and summarizes some of his contributions to the current knowledge in the science and technology of colloids and interfaces. Since 1995, Ramón González Rubio is Full Professor at the Complutense University of Madrid (Spain) where he has developed an extensive research activity in different scientific and technological aspects related to colloidal systems and interfacial phenomena: from particle-laden interfaces to polyelectrolyte multilayers, including the kinetics of simultaneous spreading and evaporation of solutions (and dispersions) and interfacial rheology. This broad research activity has contributed to some of the most recent advances in colloid and interface science, which is reflected in more than 200 papers in peer-reviewed journals and more than 4000 citations according to the Web of Science.

Interaction of Particles with Langmuir Monolayers of 1,2-Dipalmitoyl-Sn-Glycero-3-Phosphocholine: A Matter of Chemistry?

Lipid layers are considered among the first protective barriers of the human body against pollutants, e.g., skin, lung surfactant, or tear film. This makes it necessary to explore the physico-chemical bases underlying the interaction of pollutants and lipid layers. This work evaluates using a pool of surface-sensitive techniques, the impact of carbon black and fumed silica particles on the behavior of Langmuir monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). The results show that the incorporation of particles into the lipid monolayers affects the surface pressure–area isotherm of the DPPC, modifying both the phase behavior and the collapse conditions. This is explained considering that particles occupy a part of the area available for lipid organization, which affects the lateral organization of the lipid molecules, and consequently the cohesion interactions within the monolayer. Furthermore, particles incorporation worsens the mechanical performance of lipid layers, which may impact negatively in different processes presenting biological relevance. The modification induced by the particles has been found to be dependent on their specific chemical nature. This work tries to shed light on some of the most fundamental physico-chemical bases governing the interaction of pollutants with lipid layers, which plays an essential role on the design of strategies for preventing the potential health hazards associated with pollution.

Influence of Carbon Nanosheets on the Behavior of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine Langmuir Monolayers

Carbon nanomaterials are widespread in the atmospheric aerosol as a result of the combustion processes and their extensive industrial use. This has raised many question about the potential toxicity associated with the inhalation of such nanoparticles, and its incorporation into the lung surfactant layer. In order to shed light on the main physical bases underlying the incorporation of carbon nanomaterials into lung surfactant layers, this work has studied the interaction at the water/vapor interface of carbon nanosheets (CN) with Langmuir monolayers of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), with this lipid being the main component of lung surfactant layers and responsible of some of the most relevant features of such film. The incorporation of CN into DPPC Langmuir monolayers modifies the lateral organization of the DPPC at the interface, which is explained on the basis of two different effects: (i) particles occupy part of the interfacial area, and (ii) impoverishment of the lipid composition of the interface due to lipid adsorption onto the CN surface. This results in a worsening of the mechanical performance of the monolayers which may present a negative impact in the physiological performance of lung surfactant. It would be expected that the results obtained here can be useful as a step toward the understanding of the most fundamental physico-chemical bases associated with the effect of inhaled particles in the respiratory cycle.

Colloids at Fluid Interfaces

Over the last two decades, understanding of the attachment of colloids to fluid interfaces has attracted the interest of researchers from different fields. This is explained by considering the ubiquity of colloidal and interfacial systems in nature and technology. However, to date, the control and tuning of the assembly of colloids at fluid interfaces remain a challenge. This review discusses some of the most fundamental aspects governing the organization of colloidal objects at fluid interfaces, paying special attention to spherical particles. This requires a description of different physicochemical aspects, from the driving force involved in the assembly to its thermodynamic description, and from the interactions involved in the assembly to the dynamics and rheological behavior of particle-laden interfaces.