The lipid composition affects Trastuzumab adsorption at monolayers at the air-water interface

Surface Chemistry of Cytosporone-B Incorporated in Models for Microbial Biomembranes as Langmuir Monolayers

Cytosporone-B, a polyketide renowned for its antimicrobial properties, was integrated into Langmuir monolayers composed of dipalmitoylphosphoethanolamine (DPPE) and dioleoylphosphoethanolamine (DOPE) lipids, effectively emulating microbial cytoplasmic membranes. This compound exhibited an expansive influence on DPPE monolayers while inducing condensation in DOPE monolayers. This led to a notable reduction in the compressibility modulus for both lipids, with a more pronounced effect observed for DPPE. The heightened destabilization observed in DOPE monolayers subjected to biologically relevant pressures was particularly noteworthy, as evidenced by surface pressure-time curves at constant area. In-depth analysis using infrared spectroscopy at the air-water interface unveiled alterations in the alkyl chains of the lipids induced by cytosporone-B. This was further corroborated by surface potential measurements, indicating a heightened tilt in the acyl chains upon drug incorporation. Notably, these observed effects did not indicate an aggregating process induced by the drug. Overall, the distinctive impact of cytosporone-B on each lipid underscores the importance of understanding the nuanced effects of microbial drugs on membranes, whether in condensed or fluid states.

Effects induced by η6-p-cymene ruthenium(II) complexes on Langmuir monolayers mimicking cancer and healthy cell membranes do not correlate with their toxicity

The mechanism of chemotherapeutic action of Ru-based drugs involves plasma membrane disruption and valuable insights into this process may be gained using cell membrane models. The interactions of a series of cytotoxic η6-p-cymene ruthenium(II) complexes, [Ru(η6-p-cymene)P(3,5-C(CH3)3-C6H3)3Cl2] (1), [Ru(η6-p-cymene)P(3,5-CH3-C6H3)3Cl2] (2), [Ru(η6-p-cymene)P(4-CH3O-3,5-CH3-C6H2)3Cl2] (3), and [Ru(η6-p-cymene)P(4-CH3O-C6H4)3Cl2] (4), were examined using Langmuir monolayers as simplified healthy and cancerous outer leaflet plasma membrane models. The cancerous membrane (CM1 and CM2) models contained either 40 % 1,2- dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) or 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 30 % cholesterol (Chol), 20 % 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), and 10 % 1,2-dipalmitoyl-sn-glycero-3-phospho-l-serine (DPPS). Meanwhile, the healthy membrane (HM1 and HM2) models were composed of 60 % DPPC or DOPC, 30 % Chol and 10 % DPPE. The complexes affected surface pressure isotherms and decreased compressional moduli of cancerous and healthy membrane models, interacting with the monolayers headgroup and tails according to data from polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). However, the effects did not correlate with the toxicity of the complexes to cancerous and healthy cells. Multidimensional projection technique showed that the complex (1) induced significant changes in the CM1 and HM1 monolayers, though it had the lowest cytotoxicity against cancer cells and is not toxic to healthy cells. Moreover, the most toxic complexes (2) and (4) were those that least affected CM2 and HM2 monolayers. The findings here support that the ruthenium complexes interact with lipids and cholesterol in cell membrane models, and their cytotoxic activities involve a multifaceted mode of action beyond membrane disruption.

Interaction of sakuranetin with unsaturated lipids forming Langmuir monolayers at the air-water interface: A biomembrane model

This study investigates the interaction between sakuranetin, a versatile pharmaceutical flavonoid, and monolayers composed of unsaturated phospholipids, serving as a surrogate for cell membranes. The phospholipids were 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE). We conducted a series of experiments to comprehensively investigate this interaction, including surface pressure assessments, Brewster angle microscopy (BAM), and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). Our findings unequivocally demonstrate that sakuranetin interacts with these phospholipids, expanding the monomolecular films. Notably, regarding POPC, the presence of sakuranetin led to a reduction in stability and a decline in surface elasticity, which can likely be attributed to intricate molecular rearrangements at the interface. The visual evidence of aggregations in BAM images reinforces the interactions substantiated by PM-IRRAS, highlighting sakuranetin's interaction with the polar and nonpolar regions of POPC. However, it is worth noting that these aggregations do not appear to contribute significantly to the viscosity of the mixed film, and our investigations did not reveal any substantial hysteresis. In contrast, when examining POPE, we observed a minor reduction in thermodynamic stability, indicative of fewer rearrangements within the monolayer. This notion was further reinforced by the limited presence of aggregations in the BAM images. Sakuranetin also increased the rigidity of the lipid monolayer; nevertheless, the monolayer remained predominantly elastic, facilitating easy re-spreading on the surface, especially for the first lipid. PM-IRRAS analysis unveiled interactions between sakuranetin and POPE's polar and nonpolar segments, compellingly explaining the observed monolayer expansion. Taken together, our data suggest that sakuranetin was more effectively incorporated into the monomolecular layer of POPE, indicating that membranes comprised of POPC might exhibit a greater degree of interaction in the presence of this pharmacologically active compound.

Barbellatanic acid, a new antitrypanosomal pseudo-disesquiterpenoid isolated from Nectandra barbellata, displayed interaction with protozoan cell membrane

As part of our ongoing studies involving the discovery of new natural prototypes with antiprotozoal activity against Trypanosoma cruzi from Brazilian plant species, the chromatographic fractionation of hexane extract from leaves of Nectandra barbellata afforded one new pseudo-disesquiterpenoid, barbellatanic acid. The structure of this compound was elucidated by NMR and HR-ESIMS data analysis. Barbellatanic acid displayed a trypanocidal effect with IC50 of 13.2 μM to trypomastigotes and no toxicity against NCTC cells (CC50 > 200 μM), resulting in an SI value higher than 15.1. The investigation of the lethal mechanism of barbellatanic acid in trypomastigotes, using both fluorescence microscopy and spectrofluorimetric analysis, revealed a time-dependent permeation of the plasma membrane. Based on these results, this compound was incorporated in cellular membrane models built with lipid Langmuir monolayers. The interaction of barbellatanic acid with the models was inferred by tensiometric, rheological, spectroscopical, and morphological techniques, which showed that this compound altered the thermodynamic, viscoelastic, structural, and morphological properties of the film. Taking together, these results could be employed when this prodrug interacts with lipidic interfaces, such as protozoa membranes or liposomes for drug delivery systems.

Unveiling the mechanisms underlying photothermal efficiency of gold shell-isolated nanoparticles (AuSHINs) on ductal mammary carcinoma cells (BT-474)

Gold nanoparticles are valuable photothermal agents owing to their efficient photothermal conversion, photobleaching resistance, and potential surface functionalization. Herein, we combined bioinspired membranes with in vitro assays to elicit the molecular mechanisms of gold shell-isolated nanoparticles (AuSHINs) on ductal mammary carcinoma cells (BT-474). Langmuir and Langmuir-Schaefer (LS) films were handled to build biomembranes from BT-474 lipid extract. AuSHINs incorporation led to surface pressure-area (π-A) isotherms expansion, increasing membrane flexibility. Fourier-transform infrared spectroscopy (FTIR) of LS multilayers revealed electrostatic AuSHINs interaction with head portions of BT-474 lipid extract, causing lipid chain disorganization. Limited AuSHINs insertion into monolayer contributed to hydroperoxidation of the unsaturated lipids upon irradiation, consistently with the surface area increments of ca. 2.0%. In fact, membrane disruption of irradiated BT-474 cells containing AuSHINs was confirmed by confocal microscopy and LDH leakage, with greater damage at 2.2 × 1013 AuSHINs/mL. Furthermore, the decrease in nuclei dimensions indicates cell death through photoinduced damage.

Effect of Trastuzumab on the thermodynamic behavior and roughness of fluid membrane using unsaturated phospholipid/cholesterol mixed monolayer model

The microenvironment near the receptor on biological membrane plays an important role in regulating drug-receptor interaction, and the interaction between drugs and lipids on membrane can also affect the microenvironment of membrane, which may affect drugs' efficacy or cause the drug resistance. Trastuzumab (Tmab) is a monoclonal antibody, used to treat early breast cancer associated with the overexpression of Human Epidermal growth factor Receptor 2 (HER2). But its effectiveness is limited due to its tendency to make tumor cells resistant to the drug. In this work, the monolayer mixed by unsaturated phospholipids (DOPC, DOPE and DOPS) and cholesterol were used as a model to simulate the fluid membrane region on biological membrane. The phospholipid/cholesterol mixed monolayers in molar ratio 7:3 and 1:1, were respectively used to simulate the one layer of simplified normal cell membrane and tumor cell membrane. The influence of this drug on the phase behavior, elastic modulus, intermolecular force, relaxation and the surface roughness of the unsaturated phospholipid/cholesterol monolayer was investigated. The results show that at 30 mN/m the increase or decrease of the elastic modulus and surface roughness of the mixed monolayer caused by Tamb depends on the type of phospholipid, but the intensity of the effect depends on the content of cholesterol, and the intensity of influence is more significant at the presence of 50% cholesterol. However, the effect of Tmab on the ordering of the DOPC/cholesterol or DOPS/cholesterol mixed monolayer is stronger when the content of cholesterol is 30%, but it was stronger for the DOPE/cholesterol mixed monolayer when the content of cholesterol is 50%. This study is helpful to understand the effects of anticancer drugs on microenvironment of cell membrane, and it has a certain reference value for the design of drug delivery system and drug target identification.

Interactions between curcumin and cell membrane models by Langmuir monolayers

Studying interactions between potential anticancer drugs and cell membrane models is of great interest to explore the capability of novel drugs in the development of anticancer treatments. Lipid membrane models are useful to understand cellular interactions and to discern drug mechanism action. Here, the interactions of curcumin, as a bioactive natural compound with anti-cancer properties, with both healthy and cancerous or tumor cell membrane models, based on Langmuir monolayers, have been studied. The healthy-cell membrane model is composed of cholesterol 67%, and saturated lipid dipalmitoylphosphatidylcholine 33%. The cancerous-cell-membrane-model is composed of a lower proportion of cholesterol, 25%, and unsaturated lipid sphingomyelin 75%. To compare their interaction with curcumin we report the compression isotherms registered for both lipid membrane models and curcumin in different proportions, their compression moduli and the thermodynamic interaction parameters. From this analysis, we evidence a destabilizing interaction between curcumin and the cancerous cell membrane model in comparison with the healthy one. This interaction is further visualized by micro-Brewster Angle and Atomic Force Microscopies. Our experiments show that the drug enhances cohesion in the healthy membrane model whereas it fluidifies the cancerous cell membrane model causing thermodynamic destabilization. These are useful results to improve the selectivity of the drug avoiding adverse side effects of most current anticancer therapies.

Atmospheric chemical processes of microcystin-LR at the interface of sea spray aerosol

Microcystins are the most toxic toxins released by cyanobacteria and they have adverse effects on aquatic ecosystems and even human health. Although the removal and detoxification of microcystins in various water bodies have been extensively studied, the interaction mechanism and reaction process of microcystins once they enter the atmosphere are largely unknown, especially at the organic-enriched sea spray aerosol (SSA) interface. Herein, using the surface technique of Langmuir trough coupled in-situ infrared reflection-absorption spectra, we studied the interfacial behavior of microcystin-LR (MC-LR) in artificial seawater containing humic acid and typical surfactants in the presence or absence of UV-irradiation. Zwitterionic 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and anionic stearic acid (SA) were chosen as typical film-forming species, results obtained from the surface pressure-area isotherms showed that MC-LR caused greater expansion of the DSPC monolayer. The comparable results of MC-LR in DSPC/SA-containing systems indicated that the interaction ability was closely related to the monolayer molecular structure and was regulated by electrostatic interaction. Furthermore, the presence of humic acid (HA) could enhance the interaction between microcystin and monolayer molecules. UV-irradiation experiments showed that the photosensitized reaction greatly promoted the removal of microcystin embedded in the SSA surface compared with the direct photolysis effect in the absence of HA. These findings highlight that the toxic effects of microcystins after entering the atmosphere may be weakened by photochemical reactions.

Revealing local molecular distribution, orientation, phase separation, and formation of domains in artificial lipid layers: Towards comprehensive characterization of biological membranes

Lipids, together with molecules such as DNA and proteins, are one of the most relevant systems responsible for the existence of life. Selected lipids are able to assembly into various organized structures, such as lipid membranes. The unique properties of lipid membranes determine their complex functions, not only to separate biological environments, but also to participate in regulatory functions, absorption of nutrients, cell-cell communication, endocytosis, cell signaling, and many others. Despite numerous scientific efforts, still little is known about the reason underlying the variability within lipid membranes, and its biochemical significance. In this review, we discuss the structural complexity of lipid membranes, as well as the importance to simplify studied systems in order to understand phenomena occurring in natural, complex membranes. Such systems require a model interface to be analyzed. Therefore, here we focused on analytical studies of artificial systems at various interfaces. The molecular structure of lipid membranes, specifically the nanometric thickens of molecular bilayer, limits in a major extent the choice of highly sensitive methods suitable to study such structures. Therefore, we focused on methods that combine high sensitivity, and/or chemical selectivity, and/or nanometric spatial resolution, such as atomic force microscopy, nanospectroscopy (tip-enhanced Raman spectroscopy, infrared nanospectroscopy), phase modulation infrared reflection-absorption spectroscopy, sum-frequency generation spectroscopy. We summarized experimental and theoretical approaches providing information about molecular structure and composition, lipid spatial distribution (phase separation), organization (domain shape, molecular orientation) of lipid membranes, and real-time visualization of the influence of various molecules (proteins, drugs) on their integrity. An integral part of this review discusses the latest achievements in the field of lipid layer-based biosensors.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Plasma membrane permeabilization to explain erythrosine B phototoxicity on in vitro breast cancer cell models

Lipid oxidation is ubiquitous in cell life under oxygen and essential for photodynamic therapy (PDT) of carcinomas. However, the mechanisms underlying lipid oxidation in rather complex systems such as plasma membranes remain elusive. Herein, Langmuir monolayers were assembled with the lipid extract of glandular breast cancer (MCF7) cells and used to probe the molecular interactions allowing adsorption of the photosensitizer (PS) erythrosine B and subsequent photooxidation outcomes. Surface pressure (π) versus area (cm²/mL) isotherms of MCF7 lipid extract shifted to larger areas upon erythrosine incorporation, driven by secondary interactions that affected the orientation of the carbonyl groups and lipid chain organization. Light-irradiation increased the surface area of the MCF7 lipid extract monolayer containing erythrosine owing to the lipid hydroperoxidation, which may further undergo decomposition, resulting in the chain cleavage of phospholipids and membrane permeabilization. Incorporation of erythrosine by MCF7 cells induced slight toxic effects on in vitro assays, differently of the severe phototoxicity caused by light-irradiation, which significantly decreased cell viability by more than 75% at 2.5 × 10^-6 mol/L of erythrosine incubated for 3 and 24 h, reaching nearly 90% at 48 h of incubation. The origin of the phototoxic effects is in the rupture of the plasma membrane shown by the frontal (FSC) and side (SSC) light scattering of flow cytometry. Consistent with hydroperoxide decomposition, membrane permeabilization was also confirmed by cleaved lipids detected in mass spectrometry and subsidizes the necrotic pathway of cell death.

25-hydroxycholesterol interacts differently with lipids of the inner and outer membrane leaflet - The Langmuir monolayer study complemented with theoretical calculations

25-hydroxycholesterol (25-OH), a molecule with unusual behavior at the air/water interface, being anchored to the water surface alternatively with a hydroxyl group at C(3) or C(25), has been investigated in mixtures with main membrane phospholipids (phosphatidylcholines - PCs, and phosphatidylethanolamines - PEs), characteristic of the outer and inner membrane leaflet, respectively. To achieve this goal, the classical Langmuir monolayer approach based on thermodynamic analysis of interactions was conducted in addition to microscopic imaging of films (in situ with BAM and after transfer onto mica with AFM), surface-sensitive spectroscopy (PM-IRRAS), as well as theoretical calculations. Our results show that the strength of interactions is primarily determined by the kind of polar group (strong, attractive interactions leading to surface complexes formation were found to occur with PCs while weak or repulsive ones with PEs). Subsequently, the saturation of phosphatidylcholines apolar chain(s) was found to be crucial for the structure of the formed complexes. Namely, saturated PC (DPPC) does not have preferences regarding the orientation of 25-OH molecule in surface complexes (which results in the two possible 25-OH arrangements), while unsaturated PC (DOPC) enforces one specific orientation of oxysterol (with C(3)-OH group). Our findings suggest that the transport of 25-OH between inner and outer membrane leaflet can proceed without orientation changes, which is thermodynamically advantageous. This explains results found in real systems showing significant differences in the rate of transmembrane transport of 25-OH and the other chain-oxidized oxysterols compared to their ring-oxidized analogues or cholesterol.

Nanoencapsulation of lutein within lipid-based delivery systems: Characterization and comparison of zein peptide stabilized nano-emulsion, solid lipid nanoparticle, and nano-structured lipid carrier

Three lipid-based carriers encapsulating lutein, nano-emulsion (NE), solid lipid nanoparticle (SLN), and nano-structured lipid carrier (NLC), were developed from zein peptides hydrolyzed by trypsin (TZP) and flavourzyme (FZP) as stabilizers. The physiochemical properties of FZP and TZP were evaluated. The particle size, potential, microstructure, environmental stability, rheological properties, in vitro digestion stability, and bioavailability of the lutein-loaded NE, SLN, and NLC were compared. The results showed that the surface hydrophobicity of TZP was higher than that of FZP. Except for the SLN, most samples were stable against droplet aggregation during storage, and carriers stabilized by TZP exhibited more favorable storage stabilities than those prepared from FZP. All the samples presented characteristics of fluid with good fluidity. The bioavailability of lutein was between 42.61% and 62.81%. In summary, these results provide valuable insights into the design of lipid-based delivery systems for fat-soluble biologically active compounds using zein peptides as stabilizers.

Don't Forget Langmuir-Blodgett Films 2020: Interfacial Nanoarchitectonics with Molecules, Materials, and Living Objects

Designing interfacial structures with nanoscale (or molecular) components is one of the important tasks in the nanoarchitectonics concept. In particular, the Langmuir-Blodgett (LB) method can become a promising and powerful strategy in interfacial nanoarchitectonics. From this viewpoint, the status of LB films in 2020 will be discussed in this feature article. After one section on the basics of interfacial nanoarchitectonics with the LB technique, various recent research examples of LB films are introduced according to classifications of (i) growing research, (ii) emerging research, and (iii) future research. In recent LB research, various materials other than traditional lipids and typical amphiphiles can be used as film components of the LB techniques. Two-dimensional materials, supramolecular structures such as metal organic frameworks, and biomaterials such as DNA origami pieces are capable of working as functional components in the LB assemblies. Possible working areas of the LB methods would cover emerging demands, including energy, environmental, and biomedical applications with a wide range of functional materials. In addition, forefront research such as molecular manipulation and cell fate control is conducted in LB-related interfacial science. The LB technique is a traditional and well-develop methodology for molecular films with a ca. 100 year history. However, there is plenty of room at the interfaces, as shown in LB research examples described in this feature article. It is hoped that the continuous development of the science and technology of the LB method make this technique an unforgettable methodology.

Structure of DPPC Monolayers at the Air/Buffer Interface: A Neutron Reflectometry and Ellipsometry Study

Langmuir monolayers of 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine, known as DPPC, at the air/water interface are extensively used as model systems of biomembranes and pulmonary surfactant. The properties of these monolayers have been mainly investigated by surface pressure–area isotherms coupled with different complementary techniques such as Brewster angle microscopy, for example. Several attempts using neutron reflectometry (NR) or ellipsometry have also appeared in the literature. Here, we report structural information obtained by using NR and ellipsometry on DPPC monolayers in the liquid condensed phase. On one side, NR can resolve the thickness of the aliphatic tails and the degree of hydration of the polar headgroups. On the other side, ellipsometry gives information on the refractive index and, therefore, on the physical state of the monolayer. The thickness and surface excess obtained by multiple-angle-of-incidence ellipsometry (MAIE) is compared with the results from NR measurements yielding a good agreement. Besides, a novel approach is reported to calculate the optical anisotropy of the DPPC monolayer that depends on the orientation of the aliphatic chains. The results from both NR and ellipsometry are also discussed in the context of the existing results for DPPC monolayers at the air/water interface. The differences observed are rationalized by the presence of buffer molecules interacting with phospholipids.