Synergetic Enhancement of Light Harvesting and Charge Separation over Surface-Disorder-Engineered TiO 2 Photonic Crystals

Photonic crystal-assisted sub-bandgap photocatalysis via triplet-triplet annihilation upconversion for the degradation of environmental organic pollutants

This study explores novel approaches to enhance photocatalysis efficiency by introducing a photonic crystal (PC)-enhanced, multi-layered sub-bandgap photocatalytic reactor. The design aims to effectively utilize sub-bandgap photons that might otherwise go unused. The device consists of three types of layers: (1) two polymeric triplet-triplet annihilation upconversion (TTA-UC) layers converting low-energy green photons (λEx = 532 nm, 2.33 eV) to high-energy blue photons (λEm = 425 nm, 2.92 eV), (2) a platinum-decorated WO3 layer (Eg = 2.8 eV) serving as a visible-light photocatalyst, and (3) a PC layer optimizing both TTA-UC and photocatalysis. The integration of the PC layer resulted in a 1.9-fold increase in UC emission and a 7.9-fold enhancement in hydroxyl radical (•OH) generation, achieved under low-intensity sub-bandgap irradiation (17.6 mW cm-2). Consequently, the combined layered structure of TTA/Pt-WO3/TTA/PC achieved a remarkable 38.8-fold improvement in •OH production, leading to outstanding degradation capability for various organic pollutants (e.g., 4-chlorophenol, bisphenol A, and methylene blue). This multi-layered sub-bandgap photocatalytic structure, which uniquely combines TTA-UC and PC layers, offers valuable insights into designing efficient photocatalytic systems for future solar-driven environmental remediation.

Graphene Quantum Dots Nanoantibiotic-Sensitized TiO2- x Heterojunctions for Sonodynamic-Nanocatalytic Therapy of Multidrug-Resistant Bacterial Infections

The exploration of sonodynamic therapy (SDT) as a possible replacement for antibiotics by creating reactive oxygen species (ROS) is suggested as a non-drug-resistant theranostic method. However, the low-efficiency ROS generation and complex tumor microenvironment which can deplete ROS and promote tumor growth will cause the compromised antibacterial efficacy of SDT. Herein, through an oxygen vacancy engineering strategy, TiO2- x microspheres with an abundance of Ti3+ are synthesized using a straightforward reductant co-assembly approach. The narrow bandgaps and Ti3+/Ti4+-mediated multiple-enzyme catalytic activities of the obtained TiO2- x microspheres make them suitable for use as sonosensitizers and nanozymes. When graphene quantum dot (GQD) nanoantibiotics are deposited on TiO2- x microspheres, the resulting GQD/TiO2- x shows an increased production of ROS, which can be ascribed to the accelerated separation of electron-hole pairs, as well as the peroxidase-like catalytic activity mediated by Ti3+, and the depletion of glutathione mediated by Ti4+. Moreover, the catalytic activities of TiO2- x microspheres are amplified by the heterojunctions-accelerated carrier transfer. In addition, GQDs can inhibit Topo I, displaying strong antibacterial activity and further enhancing the antibacterial activity. Collectively, the combination of GQD/TiO2- x-mediated SDT/NCT with nanoantibiotics can result in a synergistic effect, allowing for multimodal antibacterial treatment that effectively promotes wound healing.

Facile Synthesis of Organic-Inorganic Hybrid Heterojunctions of Glycolated Conjugated Polymer-TiO2-X for Efficient Photocatalytic Hydrogen Evolution

The utilization of the organic-inorganic hybrid photocatalysts for water splitting has gained significant attention due to their ability to combine the advantages of both materials and generate synergistic effects. However, they are still far from practical application due to the limited understanding of the interactions between these two components and the complexity of their preparation process. Herein, a facial approach by combining a glycolated conjugated polymer with a TiO2-X mesoporous sphere to prepare high-efficiency hybrid photocatalysts is presented. The functionalization of conjugated polymers with hydrophilic oligo (ethylene glycol) side chains can not only facilitate the dispersion of conjugated polymers in water but also promote the interaction with TiO2-X forming stable heterojunction nanoparticles. An apparent quantum yield of 53.3% at 365 nm and a hydrogen evolution rate of 35.7 mmol h-1 g-1 is achieved by the photocatalyst in the presence of Pt co-catalyst. Advanced photophysical studies based on femtosecond transient absorption spectroscopy and in situ, XPS analyses reveal the charge transfer mechanism at type II heterojunction interfaces. This work shows the promising prospect of glycolated polymers in the construction of hybrid heterojunctions for photocatalytic hydrogen production and offers a deep understanding of high photocatalytic performance by such heterojunction photocatalysts.

Photon Management Enabled by Opal and Inverse Opal Photonic Crystals: from Photocatalysis to Photoluminescence Regulation

Light is a promising renewable energy source and can be converted into heat, electricity, and chemical energy. However, the efficiency of light-energy conversion is largely hindered by limited light-absorption coefficients and the low quantum yield of current-generation materials. Photonic crystals (PCs) can adjust the propagation and distribution of photons because of their unique periodic structures, which offers a compelling platform for photon management. The periodicity of materials with an alternating refractive index can be used to manipulate the dispersion of photons to generate the photonic bandgap (PBG), in which light is reflected. The slow photon effect, i. e., photon propagation at a reduced group velocity near the edges of the PBG, is widely regarded as another valuable optical property for manipulating light. Furthermore, multiple light scattering can increase the optical path, which is a vital optical property for PCs. Recently, the light reflected by PBG, the slow photon effect, and multiple light scattering have been exploited to improve light utilization efficiency in photoelectrochemistry, materials chemistry, and biomedicine to enhance light-energy conversion efficiency. In this review, the fabrication of opal or inverse opal PCs and the theory for improving the light utilization efficiency of photocatalysis, solar cells, and photoluminescence regulation are discussed. We envision photon management of opal or inverse opal PCs may provide a promising avenue for light-assisted applications to improve light-energy-conversion efficiency.

In-situ and wavelength-dependent photocatalytic strain evolution of a single Au nanoparticle on a TiO2 film

Photocatalysis is a promising technique due to its capacity to efficiently harvest solar energy and its potential to address the global energy crisis. However, the structure-activity relationships of photocatalyst during wavelength-dependent photocatalytic reactions remains largely unexplored because it is difficult to measure under operating conditions. Here we show the photocatalytic strain evolution of a single Au nanoparticle (AuNP) supported on a TiO2 film by combining three-dimensional (3D) Bragg coherent X-ray diffraction imaging with an external light source. The wavelength-dependent generation of reactive oxygen species (ROS) has significant effects on the structural deformation of the AuNP, leading to its strain evolution. Density functional theory (DFT) calculations are employed to rationalize the induced strain caused by the adsorption of ROS on the AuNP surface. These observations provide insights of how the photocatalytic activity impacts on the structural deformation of AuNP, contributing to the general understanding of the atomic-level catalytic adsorption process.

Highly Dispersed Ni-Pt Bimetallic Cocatalyst: The Synergetic Effect Yields Pt-Like Activity in Photocatalytic Hydrogen Evolution

Achieving high photocatalytic activity with the lowest possible platinum (Pt) consumption is crucial for reducing the cost of Pt-based cocatalysts and enabling large-scale applications. Bimetallic Ni-Pt cocatalysts exhibit excellent photocatalytic performance and are considered one of the most promising photocatalysts capable of replacing pure Pt for hydrogen evolution reaction (HER). However, the synergistic photocatalytic mechanism between bimetallic Ni-Pt cocatalysts needs to be further investigated. Herein, we deposit highly dispersed Ni-Pt bimetallic cocatalysts on the surface of TiO2 by radiolytic reduction. We study the dynamics of photogenerated charge carriers of the Ni-Pt-comodified TiO2 and propose their underlying electron transfer mechanisms, in which Pt acts as an electron trap, whereas Ni serves as an electron supplier. The synergistic effect is Ni/Pt ratio-dependent and can confer bimetallic Ni-Pt to pure Pt-like photocatalytic activity in HER. The Ni2-Pt1-comodified TiO2 is optimized to be the most cost-effective photocatalyst with robust stability, which exhibits about 40-fold higher performance than bare TiO2.

Ordered porous nitrogen-vacancy carbon nitride for efficient visible-light hydrogen evolution

Photocatalytic H₂ evolution is a promising technology which could be instrumental in producing clean hydrogen energy. In regard to the photocatalyst, its band structure, morphology and light utilization have a significant influence on the H₂ evolution rate and stability. Herein, a three-dimensional ordered macroporous nitrogen-vacancy carbon nitride (3DOM V-CN) photocatalyst was developed by combining vacancies with 3DOM structure for visible-light photocatalytic H₂ evolution. This strategy preserved the structural properties of 3DOM to improve the light utilization and the specific surface area of the photocatalysts. Moreover, constructing suitable vacancies could trap electrons to facilitate the separation of photogenerated carriers, and extend the light absorption region of the photocatalysts by adjusting band structure, thus improving photocatalytic activity. Compared with CN (0.3 mmol h^-1 g^-1), 3DOM V-CN demonstrated a superior photocatalytic H₂ evolution rate of 2.3 mmol h^-1 g^-1 (λ ≥ 420 nm) while possessing excellent stability. This work provides an effective and low-cost strategy for the design of the photocatalysts with high activity and stability by simultaneously tuning the band structure and morphology.

Superexchange-induced Pt-O-Ti3+ site on single photocatalyst for efficient H2 production with organics degradation in wastewater

Efficient photocatalytic H2 production from wastewater instead of pure water is a dual solution to the environmental and energy crisis, but due to the rapid recombination of photoinduced charge in the photocatalyst and inevitable electron depletion caused by organic pollutants, a significant challenge of dual-functional photocatalysis (simultaneous oxidative and reductive reactions) in single catalyst is designing spatial separation path for photogenerated charges at atomic level. Here, we designed a Pt-doped BaTiO3 single catalyst with oxygen vacancies (BTPOv) that features Pt-O-Ti3+ short charge separation site, which enables excellent H2 production performance (1519 μmol·g-1·h-1) while oxidizing moxifloxacin (k = 0.048 min-1), almost 43 and 98 times than that of pristine BaTiO3 (35 μmol·g-1·h-1 and k = 0.00049 min-1). The efficient charge separation path is demonstrated that the oxygen vacancies extract photoinduced charge from photocatalyst to catalytic surface, and the adjacent Ti3+ defects allow rapid migration of electrons to Pt atoms through the superexchange effect for H* adsorption and reduction, while the holes will be confined in Ti3+ defects for oxidation of moxifloxacin. Impressively, the BTPOv shows an exceptional atomic economy and potential for practical applications, a best H2 production TOF (370.4 h-1) among the recent reported dual-functional photocatalysts and exhibiting excellent H2 production activity in multiple types of wastewaters.

Functionalized Regulation of Metal Defects in ln2S3 of p-n Homojunctions

The introduction of metal vacancies into n-type semiconductors could efficiently construct intimate contact interface p-n homojunctions to accelerate the separation of photogenerated carriers. In this work, a cationic surfactant occupancy method was developed to synthesize an indium-vacancy (V_In)-enriched p-n amorphous/crystal homojunction of indium sulfide (A/C-IS) for sodium lignosulfonate (SL) degradation. The amount of V_In in the A/C-IS could be regulated by varying the content of added cetyltrimethylammonium bromide (CTAB). Meanwhile, the steric hindrance of CTAB produced mesopores and macropores, providing transfer channels for SL. The degradation rates of A/C-IS to SL were 8.3 and 20.9 times higher than those of crystalline In₂S₃ and commercial photocatalyst (P25), respectively. The presence of unsaturated dangling bonds formed by V_In reduced the formation energy of superoxide radicals (^•O₂^-). In addition, the inner electric field between the intimate contact interface p-n A/C-IS promoted the migration of electron-hole pairs. A reasonable degradation pathway of SL by A/C-IS was proposed based on the above mechanism. Moreover, the proposed method could also be applicable for the preparation of p-n homojunctions with metal vacancies from other sulfides.

Build-in electric field in CuWO4/covalent organic frameworks S-scheme photocatalysts steer boosting charge transfer for photocatalytic CO2 reduction

Covalent organic frameworks (COFs) are crystalline porous materials with enormous potential for realizing solar-driven CO₂-to-fuel conversion, yet the sluggish transfer/separation of photoinduced electrons and holes remains a compelling challenge. Herein, a step (S)-scheme heterojunction photocatalyst (CuWO₄-COF) was rationally fabricated by a thermal annealing method for boosting CO₂ conversion to CO. The optimal CuWO₄/COF composite sample, integrating 10 wt% CuWO₄ with an olefin (C═C) linked COF (TTCOF), achieved a remarkable gas-solid phase CO yield as high as 7.17 ± 0.35 μmol g^-1h^-1 under visible light irradiation, which was significantly higher than the pure COF (1.6 ± 0.29 μmol g^-1h^-1). The enhanced CO₂ conversion rate could be attributable to the interface engineering effect and the formation of internal electric field (IEF) directing from TTCOF to CuWO₄ according to the theoretical calculation and experimental results, which also proves the electrons transfer from TTCOF to CuWO₄ upon hybridization. In addition, driven by the IEF, the photoinduced electrons can be steered from CuWO₄ to TTCOF under visible light irradiation as well-elucidated by in-situ irradiated X-ray photoelectron spectroscopy, verifying the S-scheme charge transfer pathway over CuWO₄/COF composite heterojunctions, which greatly foster the photoreduction activity of CO₂. The preparation technique of the S-scheme heterojunction photocatalyst in this study provides a paradigmatic protocol for photocatalytic solar fuel generation.

Highly efficient visible light active doped metal oxide photocatalyst and SERS substrate for water treatment

The development of efficient nanomaterials with promising optical and surface properties for multifunctional applications has always been a subject of novel research. In this work, the study of highly efficient TiO₂ nanorods (NRs) and Ta-doped TiO₂ NRs (Ta-TiO₂ NRs) synthesized by alkaline hydrothermal treatment followed by soaking treatment has been reported. NRs were investigated for their potential applications as recyclable/reproducible visible light active photocatalysts and surface-enhanced Raman scattering (SERS) substrates in wastewater treatment. NRs were characterized by various microscopic (scanning and transmission electron microscopy), spectroscopic (X-ray diffraction, X-ray photoelectron, UV-visible, photoluminescence, and Raman spectroscopy), and surface (Brunauer-Emmett-Teller) techniques. The NRs exhibited promising optical properties with a band gap of 2.95 eV (TiO₂ NRs) and 2.58 eV (Ta-TiO₂ NRs) showing excellent photo-degradation activities for methylene blue (MB) dye molecules under natural sunlight. Particularly, Ta-TiO₂ NRs showed enhanced response as visible light active photocatalysts in normal sunlight and also as SERS substrate attributed to the additional defects introduced by Ta doping. It could be explained by the combined effect of doping-induced enhanced visible light absorption and charge transfer (CT) properties of Ta-TiO₂ NRs. Furthermore, Ta-TiO₂ NRs were investigated for their long-term stability, reproducibility of the data, and recyclability in view of their potential applications in water treatment.

Recent Advances in Black TiO2 Nanomaterials for Solar Energy Conversion

Titanium dioxide (TiO₂) nanomaterials have been widely used in photocatalytic energy conversion and environmental remediation due to their advantages of low cost, chemical stability, and relatively high photo-activity. However, applications of TiO₂ have been restricted in the ultraviolet range because of the wide band gap. Broadening the light absorption of TiO₂ nanomaterials is an efficient way to improve the photocatalytic activity. Thus, black TiO₂ with extended light response range in the visible light and even near infrared light has been extensively exploited as efficient photocatalysts in the last decade. This review represents an attempt to conclude the recent developments in black TiO₂ nanomaterials synthesized by modified treatment, which presented different structure, morphological features, reduced band gap, and enhanced solar energy harvesting efficiency. Special emphasis has been given to the newly developed synthetic methods, porous black TiO₂, and the approaches for further improving the photocatalytic activity of black TiO₂. Various black TiO₂, doped black TiO₂, metal-loaded black TiO₂ and black TiO₂ heterojunction photocatalysts, and their photocatalytic applications and mechanisms in the field of energy and environment are summarized in this review, to provide useful insights and new ideas in the related field.

Vacancy-Modulated of CuS for Highly Antibacterial Efficiency via Photothermal/Photodynamic Synergetic Therapy

Cu-based nanomaterials have been developed to alleviate the problem of antibiotic resistance due to their superior properties and good biocompatibility. Defects in nanomaterials have a major role in improving photocatalytic performance. Herein, two CuS nanospheres with predominant V_CuSCu and V_CuSS vacancy (abbreviated as CuS and CuS-T150, respectively) characterized by positron annihilation spectra are synthesized. The combination of experimental and theoretical calculation results demonstrates that CuS-T150 exhibits excellent antibacterial, achieving bactericidal rates of 99.9% against to Escherichia coli (E. coli) under 808 nm laser irradiation. Compared with CuS, the superior antimicrobial activity of CuS-T150 is mainly attributed to its stronger ability to adsorb oxygen molecules, more easily bind with surface of E. coli, and higher photothermal conversion efficiency (PTCE). This work provides a deeper understanding of nanomaterials with vacancy modulated the antibacterial efficiency by synergistic effect of photodynamic and photothermal therapy.

Recent Advances in TiO2-based Photoanodes for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting has attracted a great attention in the past several decades which holds great promise to address global energy and environmental issues by converting solar energy into hydrogen. However, its low solar-to-hydrogen (STH) conversion efficiency remains a bottleneck for practical application. Developing efficient photoelectrocatalysts with high stability and high STH conversion efficiency is one of the key challenges. As a typical n-type semiconductor, titanium dioxide (TiO 2 ) exhibits high PEC water splitting performance, especially high chemical and photo stability. But, TiO 2 has also disadvantages such as wide band gap and fast electron-hole recombination rate, which seriously hinder its PEC performance. This review focuses on recent development in TiO 2 -based photoanodes as well as some key fundamentals. The corresponding mechanisms and key factors for high STH, and controllable synthesis and modification strategies are highlighted in this review. We conclude finally with an outlook providing a critical perspective on future trends on TiO 2 -based photoanodes for PEC water splitting.

Synergistic Integration of AuCu Co-Catalyst with Oxygen Vacancies on TiO2 for Efficient Photocatalytic Conversion of CO2 to CH4

Photocatalytic reduction of CO₂ toward eight-electron CH₄ product with simultaneously high conversion efficiency and selectivity remains great challenging owing to the sluggish charge separation and transfer kinetics and lack of active sites for the adsorption and activation of reactants. Herein, a defective TiO₂ nanosheet photocatalyst simultaneously equipped with AuCu alloy co-catalyst and oxygen vacancies (AuCu-TiO_2-x NSs) was rationally designed and fabricated for the selective conversion of CO₂ into CH₄. The experimental results demonstrated that the AuCu alloy co-catalyst not only effectively promotes the separation of photogenerated electron-hole pairs but also acts as synergistic active sites for the reduction of CO₂. The oxygen vacancies in TiO₂ contribute to the separation of charge carriers and, more importantly, promote the oxidation of H₂O, thus providing rich protons to promote the deep reduction of CO₂ to CH₄. Consequently, the optimal AuCu-TiO_2-x nanosheets (NSs) photocatalyst achieves a CO₂ reduction selectivity toward CH₄ up to 90.55%, significantly higher than those of TiO_2-x NSs (31.82%), Au-TiO_2-x NSs (38.74%), and Cu-TiO_2-x NSs (66.11%). Furthermore, the CH₄ evolution rate over the AuCu-TiO_2-x NSs reaches 22.47 μmol·g^-1·h^-1, which is nearly twice that of AuCu-TiO₂ NSs (12.10 μmol·g^-1·h^-1). This research presents a unique insight into the design and synthesis of photocatalyst with oxygen vacancies and alloy metals as the co-catalyst for the highly selective deep reduction of CO₂.

Rich oxygen vacancies, mesoporous TiO2 derived from MIL-125 for highly efficient photocatalytic hydrogen evolution

Here we report a mesoporous TiO₂ with a large specific surface area and rich oxygen vacancies using a Ti-based MOF (MIL-125) as a precursor through high-temperature annealing. Such integration of a unique mesoporous structure and oxygen vacancies provides effective carrier transport channels, increases surface active sites, and enhances photocatalytic activity for the hydrogen evolution reaction.

Ordered Macroporous Carbonous Frameworks Implanted with CdS Quantum Dots for Efficient Photocatalytic CO2 Reduction

Solar-driven photocatalytic CO₂ reduction is regarded as a promising way to simultaneously mitigate the energy crisis and CO₂ pollution. However, achieving high efficiency of photocatalytic CO₂ reduction, especially without the assistance of sacrifice reagents or extra alkaline additives, remains a critical issue. Herein, a photocatalyst of 3D ordered macroporous N-doped carbon (NC) supported CdS quantum dots (3DOM CdSQD/NC) is successfully fabricated toward photocatalytic CO₂ reduction via an in situ transformation strategy. Additionally, an amines oxidation reaction is introduced to replace the H₂ O oxidation process to further boost the photocatalytic CO₂ reduction efficiency. Impressively, 3DOM CdSQD/NC exhibits superior activity and selectivity in photocatalytic CO₂ reduction coupled with amines oxidation, affording a CO production rate as high as 5210 µmol g^-1 h^-1 in the absence of any sacrificial agents and alkaline additives. Moreover, 3DOM CdSQD/NC achieves an apparent quantum efficiency of 2.9% at 450 nm. Mechanism studies indicate that the 3D ordered macropores in the NC matrix are beneficial to the transfer of photogenerated carriers. Furthermore, the highly dispersed CdS QDs on the NC skeleton are able to significantly promote the adsorption of both CO₂ and amine molecules and depress the CO₂ activation energy barriers by stabilizing the *COOH intermediate, directly contributing to the high activity.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Photonic crystal light trapping for photocatalysis

The Achilles heel of wide-band photocatalysts such as TiO₂ is the insufficient photogeneration in the visible range under sunlight. This has been a longstanding impediment to large-scale, real-world deployment of titania-based photocatalysis applications. Instead of traditional band engineering through heavy-doping, we suggest enhancing photocatalytic efficiency of lightly-doped TiO₂ using photonic crystal (PC) structures. This strongly increases solar photogeneration through novel wave-interference-based light trapping. Four photocatalyst structures - simple cubic woodpile (wdp), square lattice nanorod (nrPC), slanted conical-pore (scPore), and face-centered cubic inverse opal (invop) - are optimized and compared for light harvesting in the sub- and above-gap (282 to 550 nm) regions of weakly absorbing TiO₂, with the imaginary part of the dielectric constant 0.01 in the visible range. The optimized lattice constants for the first three, and opal center-to-center distance for invop, are ∼300 - 350 nm. For fixed PC thickness, the ranking of visible light harvesting capability is: scPore > wdp ∼ nrPC > invop. The scPore PC deposited on highly reflective substrate is ideal for photocatalysis given its combination of enhanced light trapping and superior charge transport.

Red Phosphorus Decorated TiO2 Nanorod Mediated Photodynamic and Photothermal Therapy for Renal Cell Carcinoma

Clear cell renal cell carcinoma (ccRCC) is a serious and tenacious disease. Photodynamic therapy (PDT) and photothermal therapy (PTT) are effective means of cancer treatment. However, PDT combined with PTT has been rarely reported in ccRCC treatment. In the present study, by developing the core-shell structured TiO₂ @red phosphorus nanorods (TiO₂ @RP NRs) as a photosensitizer, the feasibility and effectiveness of synchronous PDT and PTT treatments for ccRCC are demonstrated. The core-shell structured TiO₂ @RP NRs are synthesized to drive the PDT and PTT for ccRCC, in which the RP shell is the sensitizer even in the near-infrared (NIR) region. The optimized TiO₂ @RP NRs can respond to NIR and produce local heat under irradiation. The NRs are estimated in ccRCC treatments via cell counting kit-8 assay, propidium iodide staining, qRT-PCR, and reactive oxygen species (ROS) probes in vitro, while terminal deoxynucleotidyl transferase dUTP nick-end labeling is conducted in vivo. After NIR irradiation, TiO₂ @RP NRs can efficiently kill ccRCC cells by producing local heat and ROS and cause low injury to normal kidney cells. Furthermore, treatment with TiO₂ @RP NRs and NIR can kill significant numbers of deep-tissue ccRCC cells in vivo. This work highlights a promising photo-driven therapy for kidney cancer.

Amorphous Domains in Black Titanium Dioxide

Although oxygen vacancies (O_v s) play a critical role for many applications of metal oxides, a controllable synthetic strategy for anisotropic O_v s remains a great challenge. Here, a novel strategy is proposed to achieve the regional dual structure with anisotropic O_v s at both the surface and in the interior of TiO₂ by constructing amorphous domains. The as-prepared black TiO₂ with amorphous domains exhibits superior activity in degrading rhodamine B (RhB) solutions, which can instantly decompose RhB with just a shake. First-principle simulations reveal that subsurface O_v s in TiO₂ are energetically favored, resulting in the formation of amorphous domains in the interior region via diffusion of surface-formed O_v s into the subsurface. The stable O_v -induced amorphous domains in TiO₂ with enhanced catalytic performances provide a scalable strategy to practical O_v engineering in functional metal oxides.

Central-collapsed structure of CoFeAl layered double hydroxides and its photocatalytic performance

Layered double hydroxides (LDHs) has been regarded as one of the most potential photocatalysts for degradation of the pollutants, due to the tunable elements in the laminates, high surface area and exposed active sites. Developing a photocatalyst with a visible light activity and fast charge separation efficiency is a main research focus. In this work, a central-collapsed CoFeAl-LDHs was formed via the selective etching Al³⁺ in the laminates, which relied on the function of OH^- produced by urea hydrolysis. The Central-collapsed structure of CoFeAl-LDHs exhibited enhanced adsorption activity and photocatalytic efficiency. The results show that the pseudo-second-order kinetic model and the Langmuir model are suitable for adsorption behavior. This etching cavity is beneficial to the adsorption of MB and provides a better platform for the direct interaction between MB and CoFeAl-LDHs. The morphology and photoelectrochemical properties of the central-collapsed structure of LDHs were characterized and used to explore the relationship between the etching degree and photocatalytic activity. The photocatalytic properties of all the samples under visible light irradiation were evaluated, and LDH-6 has the best photocatalytic activity. This work provides a novel approach for the fabrication of central-collapsed structure of layered double hydroxides photocatalysts to meet environmental and energy requirements.

Morphology and surface analyses for CH3NH3PbI3 perovskite thin films treated with versatile solvent-antisolvent vapors

Organometal halide perovskite (CH3NH3PbI3) semiconductors have been promising candidates as a photoactive layer for photovoltaics. Especially for high performance devices, the crystal structure and morphology of this perovskite layer should be optimized. In this experiment, by employing solvent-antisolvent vapor techniques during a modified sequential deposition of PbI2-CH3NH3I layers, the morphology engineering was carried out as a function of antisolvent species such as: chloroform, chlorobenzene, dichlorobenzene, toluene, and diethyl ether. Then, the optical, morphological, structural, and surface properties were characterized. When dimethyl sulfoxide (DMSO, solvent) and diethyl ether (antisolvent) vapors were employed, the CH3NH3PbI3 layer exhibited relatively desirable crystal structures and morphologies, resulting in an optical bandgap (E g) of 1.61 eV, crystallite size (t) of 89.5 nm, and high photoluminescence (PL) intensity. Finally, the stability of perovskite films toward water was found to be dependent on the morphologies with defects such as grain boundaries, which was evaluated through contact angle measurement.

Synergetic enhancement of surface reactions and charge separation over holey C3N4/TiO2 2D heterojunctions

Efficient charge separation and rapid interfacial reaction kinetics are crucial factors that determine the efficiency of photocatalytic hydrogen evolution. Herein, a fascinating 2D heterojunction photocatalyst with superior photocatalytic hydrogen evolution performance - holey C₃N₄ nanosheets nested with TiO₂ nanocrystals (denoted as HCN/TiO₂) - is designed and fabricated via an in situ exfoliation and conversion strategy. The HCN/TiO₂ is found to exhibit an ultrathin 2D heteroarchitecture with intimate interfacial contact, highly porous structures and ultrasmall TiO₂ nanocrystals, leading to drastically improved charge carrier separation, maximized active sites and the promotion of mass transport for photocatalysis. Consequently, the HCN/TiO₂ delivers an impressive hydrogen production rate of 282.3 μmol h^-1 per 10 mg under AM 1.5 illumination and an apparent quantum efficiency of 13.4% at a wavelength of 420 nm due to the synergetic enhancement of surface reactions and charge separation. The present work provides a promising strategy for developing high-performance 2D heterojunctions for clean energy applications.

Facile one-pot synthesis of defect-engineered step-scheme WO3/g-C3N4 heterojunctions for efficient photocatalytic hydrogen production

Defect-engineered step-scheme WO₃/g-C₃N₄ heterojunctions synthesized by a facile one-pot method greatly improve the photocatalytic activity for hydrogen evolution.

A defective g-C3N4/RGO/TiO2 composite from hydrogen treatment for enhanced visible-light photocatalytic H2 production

Photocatalytic H2 evolution is a clean technology to alleviate energy and environmental issues. The limited light absorption and the separation efficiency of photogenerated charge carriers are the major hurdles constraining the application of numerous photocatalysts. Herein, we report a simple and effective strategy, a multistep heat-treatment method, to synthesise a defective g-C3N4/RGO/TiO2 composite to increase its rate of activity for H2 production. The defects, nitrogen and oxygen vacancies, are simultaneously introduced on the surface of the g-C3N4/RGO/TiO2 composite. The vacancy defects essentially endow g-C3N4/RGO/TiO2 with a boosted photocatalytic H2 evolution rate (4760 μmol h-1 g-1) under visible-light irradiation, which is higher than that of the most of g-C3N4/TiO2 composites. This is attributed to the improved visible-light absorption as well as the separation and transfer rate of photogenerated charge carriers arising from vacancy defects. This study may provide an avenue for preparing defective photocatalysts for efficient H2 evolution.

Color Centers on Hydrogenated TiO2 Facets Unlock Fluorescence Imaging

Hydrogenation of TiO₂ provides a promising strategy to realize fluorescence imaging. The fluorescence of hydrogenated TiO₂ arises from photoluminescence (PL) from the color centers. Color centers changed the surface electronic states to shorten fluorescence lifetimes, to unlock the intrinsic fluorescence of hydrogenated TiO₂. Specifically, the formation of color centers and their role in determining electronic states are highly facet-dependent. Color centers corresponding to surface oxygen vacancies (Vo) on {201} and {101} facets, surface Ti³⁺ on {001} facets, and subsurface Vo on {100} facets were discerned, following distinct Vo formation pathways and diffusion behaviors, as well as electron localization. The electronic states in the color centers are contributed by Ti 3d orbitals with different energy levels. Distinct electronic states on each facet give rise to TiO₂ coloration from white to dark gray, and the energy levels in color centers trigger unique PL emissions, enabling dark-gray hydrogenated {201} TiO₂ to emit bright intrinsic fluorescence.

A Microorganism Bred TiO2/Au/TiO2 Heterostructure for Whispering Gallery Mode Resonance Assisted Plasmonic Photocatalysis

The TiO₂/Au nanostructure has been acknowledged as one of the most classic visible-light active photocatalysts due to the surface plasmon resonance (SPR) of Au nanoparticles. In many cases, the SPR effect only features weak visible light absorption in conventional TiO₂/Au nanostructures. Here, we demonstrate a design of TiO₂/Au/TiO₂ with a combination of whispering gallery mode (WGM) resonances and SPR for efficient visible-light-driven photocatalysis. Escherichia coli (E. coli) were used as natural reactants as well as a template to construct an E. coli-like TiO₂/Au/TiO₂ nanostructure. Using numerical simulations, we show that the E. coli-like TiO₂ capsule acts as the WGM resonator to interplay with the SPR effect of the Au NPs on TiO₂ surface, which leads to a significant increase of visible light absorption and the local field enhancement at the Au-TiO₂ interface. Accordingly, with the synergistic effect of WGM and SPR, the E. coli-like TiO₂/Au/TiO₂ nanostructure exhibits enhanced photocatalytic activity in the visible range. Our work reveals a promising bioapproach to a design highly visible light active plasmonic photocatalyst.

Function-switchable metal/semiconductor junction enables efficient photocatalytic overall water splitting with selective water oxidation products

A novel metal/semiconductor photocatalyst, Cu nanoparticles (NPs) modified TiO₂ hollow spheres (Cu/TiO₂), was designed for efficient photocatalytic overall water splitting (POWS) under both ultraviolet (UV) and visible (Vis) light. This Cu/TiO₂ photocatalyst possesses excellent POWS performance under Vis light at the highest level among the reported TiO₂-based photocatalysts. Interestingly, the metal/semiconductor junction formed between Cu and TiO₂ enables controlled water-oxidation product selectivity (H₂O₂ or O₂) via different reaction pathways regulated by irradiation wavelengths. Under UV light, the electrons excited in TiO₂ are captured by Cu NPs through the Cu/TiO₂ Schottky interface for H₂ production, with the photoholes in TiO₂ producing H₂O₂ through a two-electron process; whilst under Vis light, Cu NPs act as plasmon to inject hot electrons to TiO₂ for H₂ production, while O₂ is produced by hot holes on Cu NPs via a four-electron process. This rational design of function-switchable metal/semiconductor junction may be helpful to understand the mechanisms for POWS with desired gas/liquid water-oxidation products.

Photonic Crystals for Plasmonic Photocatalysis

Noble metal (NM)-modified wide-bandgap semiconductors with activity under visible light (Vis) irradiation, due to localized surface plasmon resonance (LSPR), known as plasmonic photocatalysts, have been intensively studied over the last few years. Despite the novelty of the topic, a large number of reports have already been published, discussing the optimal properties, synthesis methods and mechanism clarification. It has been proposed that both efficient light harvesting and charge carriers’ migration are detrimental for high and stable activity under Vis irradiation. Accordingly, photonic crystals (PCs) with photonic bandgap (PBG) and slow photon effects seem to be highly attractive for efficient use of incident photons. Therefore, the study on PCs-based plasmonic photocatalysts has been conducted, mainly on titania inverse opal (IO) modified with nanoparticles (NPs) of NM. Although, the research is quite new and only several reports have been published, it might be concluded that the matching between LSPR and PBG (especially at red edge) by tuning of NMNPs size and IO-void diameter, respectively, is the most crucial for the photocatalytic activity.

Photocatalytic and Photoelectrochemical Systems: Similarities and Differences

Photocatalytic and photoelectrochemical processes are two key systems in harvesting sunlight for energy and environmental applications. As both systems are employing photoactive semiconductors as the major active component, strategies have been formulated to improve the properties of the semiconductors for better performances. However, requirements to yield excellent performances are different in these two distinctive systems. Although there are universal strategies applicable to improve the performance of photoactive semiconductors, similarities and differences exist when the semiconductors are to be used differently. Here, considerations on selected typical factors governing the performances in photocatalytic and photoelectrochemical systems, even though the same type of semiconductor is used, are provided. Understanding of the underlying mechanisms in relation to their photoactivities is of fundamental importance for rational design of high-performing photoactive materials, which may serve as a general guideline for the fabrication of good photocatalysts or photoelectrodes toward sustainable solar fuel generation.

Recent advances in the synthesis of hierarchically mesoporous TiO2 materials for energy and environmental applications

Because of their low cost, natural abundance, environmental benignity, plentiful polymorphs, good chemical stability and excellent optical properties, TiO₂ materials are of great importance in the areas of physics, chemistry and material science. Much effort has been devoted to the synthesis of TiO₂ nanomaterials for various applications. Among them, mesoporous TiO₂ materials, especially with hierarchically porous structures, show great potential owing to their extraordinarily high surface areas, large pore volumes, tunable pore structures and morphologies, and nanoscale effects. This review aims to provide an overview of the synthesis and applications of hierarchically mesoporous TiO₂ materials. In the first section, the general synthetic strategies for hierarchically mesoporous TiO₂ materials are reviewed. After that, we summarize the architectures of hierarchically mesoporous TiO₂ materials, including nanofibers, nanosheets, microparticles, films, spheres, core-shell and multi-level structures. At the same time, the corresponding mechanisms and the key factors for the controllable synthesis are highlighted. Following this, the applications of hierarchically mesoporous TiO₂ materials in terms of energy storage and environmental protection, including photocatalytic degradation of pollutants, photocatalytic fuel generation, photoelectrochemical water splitting, catalyst support, lithium-ion batteries and sodium-ion batteries, are discussed. Finally, we outline the challenges and future directions of research and development in this area.