Anti-bacterial assay of doped membrane by zero valent Fe nanoparticle via in-situ and ex-situ aspect

Nanostructure-manipulated filtration performance in nanocomposite membranes: A comprehensive investigation for water and wastewater treatment

The main objective of this article is to examine one of the most important challenges facing researchers in the field of nanocomposite membranes: what is the most suitable arrangement (unmodified, functionalized, coated, or composite) and the most suitable loading site for the nanostructure? In the review articles published on nanocomposite membranes in recent years, the focus has been either on a specific application area (such as nanofiltration or desalination), or on a specific type of polymeric materials (such as polyamide), or on a specific feature of the membrane (such as antibacterial, antimicrobial, or antifouling). However, none of them have targeted the aforementioned objectives on the efficacy of improving filtration performance (IFP). Through IFP calculation, the results will be repeatable and generalizable in this field. The novelty of the current research lies in examining and assessing the impact of the loading site and the type of nanostructure modification on enhancing IFP. Based on the performed review results, for the researchers who tend to use nanocomposite membranes for treatment of organic, textile, brine and pharmaceutical wastewaters as well as membrane bioreactors, thePES NH 2 - PDA - Fe 3 O 4 M ,PAN Fe 3 O 4 / ZrO 2 M ,PVDF CMC - ZnO M ,AA AA - CuS PSf M andPVDF OCMCS / Fe 3 O 4 M with IFP equal to 132.27, 15, 423.6, 16.025 and 5, were proposed, respectively.

A review on hazards and treatment methods of released antibiotics in hospitals wastewater during the COVID-19 pandemic

Drugs and related goods are widely used in order to promote public health and the quality of life. One of the most serious environmental challenges affecting public health is the ongoing presence of antibiotics in the effluents generated by pharmaceutical industries and hospitals. Antibiotics cannot be entirely removed from wastewater using the traditional wastewater treatment methods. Unmetabolized antibiotics generated by humans can be found in urban and livestock effluent. The antibiotic present in effluent contributes to issues with resistance to antibiotics and the creation of superbugs. Over the recent 2 years, the coronavirus disease 2019 pandemic has substantially boosted hospital waste volume. In this situation, a detailed literature review was conducted to highlight the harmful effects of untreated hospital waste and outline the best approaches to manage it. Approximately 50 to 70% of the emerging contaminants prevalent in the hospital wastewater can be removed using traditional treatment strategies. This paper emphasizes the numerous treatment approaches for effectively eliminating emerging contaminants and antibiotics from hospital wastewater and provides an overview of global hospital wastewater legislation and guidelines on hospital wastewater administration. Around 90% of ECs might be eliminated by biological or physical treatment techniques when used in conjunction with modern oxidation techniques. According to this research, hybrid methods are the best approach for removing antibiotics and ECs from hospital wastewater. The document outlines the many features of effective hospital waste management and might be helpful during and after the coronavirus disease 2019 outbreak, when waste creation on all hospitals throughout the globe has considerably increased.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

Membrane Surface Modification via In Situ Grafting of GO/Pt Nanoparticles for Nitrate Removal with Anti-Biofouling Properties

Nanofiltration processes for the removal of emerging contaminants such as nitrate are a focus of attention of research works as an efficient technique for providing drinking water for people. Polysulfone (PSF) nanofiltration membranes containing graphene oxide (GO)/Pt (0, 0.25, 0.5, 0.75, 1 wt%) nanoparticles were generated with the phase inversion pathway. The as-synthesized samples were characterized by FTIR, SEM, AFM, and contact angle tests to study the effect of GO/Pt on hydrophilicity and antibacterial characteristics. The results conveyed that insertion of GO/Pt dramatically improved the biofouling resistance of the membranes. Permeation experiments indicated that PSF membrane embracing 0.75 wt% GO/Pt nanoparticles had the highest nitrate flux and rejection ability. The membrane's configuration was simulated using OPEN-MX simulating software indicating membranes maintaining 0.75 wt% of GO/Pt nanoparticles revealed the highest stability, which is well in accordance with experimental outcomes.

Preparation of Polyvinylidene Fluoride Nano-Filtration Membranes Modified with Functionalized Graphene Oxide for Textile Dye Removal

Water scarcity has become one of the most significant problems globally. Membrane technology has gained considerable attention in water treatment technologies. Polymeric nanocomposite membranes are based on several properties, with enhanced water flux, high hydrophilicity and anti-biofouling behavior, improving the membrane performance, flexibility, cost-effectiveness and excellent separation properties. In this study, aminated graphene oxide (NH₂-GO)-based PVDF membranes were fabricated using a phase-inversion method for textile dye removal. These fabricated membranes showed the highest water flux at about 170.2 (J/L.h⁻¹.m⁻²) and 98.2% BSA rejection. Moreover, these membranes removed about 96.6% and 88.5% of methylene blue and methyl orange, respectively. Aminated graphene oxide-based polyvinylidene fluoride (PVDF) membranes emerge as a good membrane material that enhances the membrane performance.

Preparation and characterization of nano-filtration and its photocatalytic abilities via pre-coated and self-forming dynamic membranes developed by ZnO, PAC and chitosan

In the current work, novel dynamic membranes (DM) were tested and introduced for cheese whey wastewater treatment based on resistant and inexpensive materials, polyesters, and chitosan. For the investigation of dynamic membrane (pre-coated and self-forming) characterizations, polyester as a low-cost and natural material with chitosan were chosen to provide the support of the target membrane. The inherent antifouling character of chitosan accompanied by its high hydrophilicity have made this polymer known as an attractive agent for membrane-based wastewater treatment operations. Zinc oxide (ZnO) and powdered activated carbon (PAC) were employed as the dynamic layer. Neat polyester had a chemical oxygen demand (COD) rejection ratio of about 57.61%, but the flux declined sharply. The higher removal efficiency was for the self-forming type: total phosphate (94%) and citrate (95.5%). Fouled dynamic membranes were backwashed by sodium dodecyl-sulphate (SDS), warm water, and distilled water. Results demonstrated that the pre-coated was reduced and fouling increased the flux recovery rate (FRR) (9.1%) while use of the self-forming DM exhibited an aggravation of fouling by decreasing of support FRR (11.1%). It was found that by substitution of deionized water and hot water with SDS, FRR was enhanced. In the following, the photocatalytic ability of the product was investigated. The UV light source increased the removal ratio and FRR. For example, self-forming COD rejection was enhanced (6.63%).

Hexavalent chromium removal by multilayer membrane assisted by photocatalytic couple nanoparticle from both permeate and retentate

In this study, a novel photocatalytic thin film nanocomposite (TFC) membrane was prepared for removal of hexavalent chromium (Cr(VI)) from aqueous solution. In this regards, a TFC membrane was modified by a layer of chitosan as an adsorbent and then was coated with a layer of synthesized photocatalytic nanoscale zerovalent iron@titanium dioxide (nZVI@TiO₂) nanoparticles via layer-by-layer (LBL) technology. Prepared membranes were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and contact angle analysis. The Cr(VI) removal efficiency of the membranes was evaluated by batch removal and dynamic filtration tests. The water flux was increased from 26.2 to 39.7l/m²h as a consequence of improved hydrophilicity which was approved by contact angle analysis. The modified TFC membrane has shown the significant removal of Cr(VI) in retentate as well as the permeate stream. Further, the Cr(VI) removal of retentate flow decreased with increasing pH and feed concentration whereas the Cr(VI) removal of permeate was enhanced with increasing initial feed concentration. Increasing the flux recovery from 62% (for neat TFC) to 87% (for modified TFC membrane) demonstrated that the modification of membrane improved the anti-fouling property of the modified membrane.

Highly permeable PVDF membrane with PS/ZnO nanocomposite incorporated for distillation process

In order to enhance the flux and wetting resistance of PVDF membranes for MD applications, we have developed a novel PVDF blend nanocomposite membrane using a polystyrene/ZnO (PS/ZnO) hybrid nanocomposite. The PS/ZnO nanocomposite was synthesized by free radical polymerization of styrene in the presence of vinyltrimethoxysilane (VTMS) grafted on the surface of ZnO nanoparticles. The blend nanocomposite membrane is fabricated via the phase inversion method and we examined the effects of the PS/ZnO nanocomposite on porosity, mechanical properties, hydrophobicity, LEPw, morphology, surface roughness and MD performance. It was found that the addition of the PS/ZnO hybrid nanocomposite (0.25, 0.5 and 0.75%) resulted in an increase in porosity (>70%), which is attributed to increased pore size and reduction of the spongy layer thickness. Furthermore, the addition of the nanocomposite also improved the surface roughness and contact angle. Comparison between the neat and modified membrane shows that with incorporation of the PS/ZnO nanocomposite, the desalination flux of 30 g L⁻¹ saline aqueous solution significantly increased and rejection reached 99.99%. Meanwhile, during 100 hours continuous desalination process, the membranes composed of 0.75% PS/ZnO hybrid nanocomposite exhibited high performance stability (15.79 kg m⁻² h⁻¹) compared with the neat PVDF membrane.

In order to enhance the flux and wetting resistance of PVDF membranes for MD applications, we have developed a novel PVDF blend nanocomposite membrane using a polystyrene/ZnO (PS/ZnO) hybrid nanocomposite.