Application of tetraoxadiaza-crown ether derivatives as chiral selector modifiers in capillary electrophoresis

Past, present, and future developments in enantioselective analysis using capillary electromigration techniques

Enantioseparation of chiral products has become increasingly important in a large diversity of academic and industrial applications. The separation of chiral compounds is inherently challenging and thus requires a suitable analytical technique that can achieve high resolution and sensitivity. In this context, CE has shown remarkable results so far. Chiral CE offers an orthogonal enantioselectivity and is typically considered less costly than chromatographic techniques, since only minute amounts of chiral selectors are needed. Several CE approaches have been developed for chiral analysis, including chiral EKC and chiral CEC. Enantioseparations by EKC benefit from the wide variety of possible pseudostationary phases that can be employed. Chiral CEC, on the other hand, combines chromatographic separation principles with the bulk fluid movement of CE, benefitting from reduced band broadening as compared to pressure-driven systems. Although UV detection is conventionally used for these approaches, MS can also be considered. CE-MS represents a promising alternative due to the increased sensitivity and selectivity, enabling the chiral analysis of complex samples. The potential contamination of the MS ion source in EKC-MS can be overcome using partial-filling and counter-migration techniques. However, chiral analysis using monolithic and open-tubular CEC-MS awaits additional method validation and a dedicated commercial interface. Further efforts in chiral CE are expected toward the improvement of existing techniques, the development of novel pseudostationary phases, and establishing the use of chiral ionic liquids, molecular imprinted polymers, and metal-organic frameworks. These developments will certainly foster the adoption of CE(-MS) as a well-established technique in routine chiral analysis.

Study on clarithromycin lactobionate based dual selector systems for the enantioseparation of basic drugs in capillary electrophoresis

In this paper, the use of clarithromycin lactobionate, a kind of antibiotic chiral selector, in combination with four neutral cyclodextrin derivatives (glucose-β-cyclodextrin, hydroxyethyl-β-cyclodextrin, methyl-β-cyclodextrin and hydroxypropyl-β-cyclodextrin) was reported for the first time. As a result, these dual systems gave much better resolution of nefopam (the Rs increased to 3.58, 2.72, 1.49 and 1.42, respectively) compared to the single systems. The effects of buffer pH and selector concentration on the separation of nefopam were also investigated. Additionally, some other basic drugs including metoprolol, atenolol, propranolol, bisoprolol, esmolol and ritodrine were tested for the investigation and evaluation of the enantiorecognition capability of the four dual systems. As expected, the synergistic effect was observed in four systems. Different results of these dual systems were also summarized.

Capillary electrophoresis separation of peptide diastereomers that contain methionine sulfoxide by dual cyclodextrin-crown ether systems

A dual-selector system employing achiral crown ethers in combination with cyclodextrins has been developed for the separation of peptide diastereomers that contain methionine sulfoxide. The combinations of the crown ethers 15-crown-5, 18-crown-6, Kryptofix® 21 and Kryptofix® 22 and β-cyclodextrin, carboxymethyl-β-cyclodextrin, and sulfated β-cyclodextrin were screened at pH 2.5 and pH 8.0 using a 40/50.2 cm, 50 μm id fused-silica capillary and a separation voltage of 25 kV. No diastereomer separation was observed in the sole presence of crown ethers, while only sulfated β-cyclodextrin was able to resolve some peptide diastereomers at pH 8.0. Depending on the amino acid sequence of the peptide and the applied cyclodextrin, the addition of crown ethers, especially the Krpytofix® diaza-crown ethers, resulted in significantly enhanced chiral recognition. Keeping one selector of the dual system constant, increasing concentrations of the second selector resulted in increased peak resolution and analyte migration time for peptide-crown ether-cyclodextrin combinations. The simultaneous diastereomer separation of three structurally related peptides was achieved using the dual selector system.

Capillary electrophoresis for pharmaceutical analysis

This chapter describes the application of capillary electrophoresis (CE) to pharmaceutical analysis. The areas of pharmaceutical analysis covered are enantiomer separation, analysis of small molecules such as amino acids or drug counter-ions, pharmaceutical assay, related substances determinations, and physiochemical measurements such as log P and pKa of compounds. The different electrophoretic modes available and their advantages for pharmaceutical analysis are described. Recent applications of CE for each subject area are tabulated with electrolyte details. Information on electrolyte choice and method optimization to obtain optimal separations is included.

Chemometric experimental design based optimization techniques in capillary electrophoresis: a critical review of modern applications

A critical review of recent developments in the use of chemometric experimental design based optimization techniques in capillary electrophoresis applications is presented. Current advances have led to enhanced separation capabilities of a wide range of analytes in such areas as biological, environmental, food technology, pharmaceutical, and medical analysis. Significant developments in design, detection methodology and applications from the last 5 years (2002-2007) are reported. Furthermore, future perspectives in the use of chemometric methodology in capillary electrophoresis are considered.

Influence of microemulsion chirality on chromatographic figures of merit in EKC: Results with novel three-chiral-component microemulsions and comparison with one- and two-chiral-component microemulsions

Novel microemulsion formulations containing all chiral components are described for the enantioseparation of six pairs of pharmaceutical enantiomers (atenolol, ephedrine, metoprolol, N-methyl ephedrine, pseudoephedrine, and synephrine). The chiral surfactant dodecoxycarbonylvaline (DDCV, R- and S-), the chiral cosurfactant S-2-hexanol, and the chiral oil diethyl tartrate (R- and S-) were combined to create four different chiral microemulsions, three of which were stable. Results obtained for enantioselectivity, efficiency, and resolution were compared for the triple-chirality systems and the single-chirality system that contained chiral surfactant only. Improvements in enantioselectivity and resolution were achieved by simultaneously incorporating three chiral components into the aggregate. The one-chiral-component microemulsion provided better efficiencies. Enantioselective synergies were identified for the three-chiral-component nanodroplets using a thermodynamic model. Additionally, two types of dual-chirality systems, chiral surfactant/chiral cosurfactant and chiral surfactant/chiral oil, were examined in terms of chromatographic figures of merit, with the former providing much better resolution. The two varieties of two-chiral-component microemulsions gave similar values for enantioselectivity and efficiency. Lastly, the microemulsion formulations were divided into categories based on the number of chiral microemulsion reagents and the average results for each pair of enantiomers were analyzed for trends. In general, enantioselectivity and resolution were enhanced while efficiency was decreased as more chiral components were used to create the pseudostationary phase (PSP).

Two-chiral component microemulsion EKC – chiral surfactant and chiral oil. Part 2: Diethyl tartrate

In this second study on dual-chirality microemulsions containing a chiral surfactant and a chiral oil, a less hydrophobic and lower interfacial tension chiral oil, diethyl tartrate, is employed (Part 1, Foley, J. P. et al.., Electrophoresis, DOI: 10.1002/elps.200600551). Six stereochemical combinations of dodecoxycarbonylvaline (DDCV: R, S, or racemic, 2.00% w/v), racemic 2-hexanol (1.65% v/v), and diethyl tartrate (D, L, or racemic, 0.88% v/v) were examined as pseudostationary phases (PSPs) for the enantioseparation of six chiral pharmaceutical compounds: pseudoephedrine, ephedrine, N-methyl ephedrine, metoprolol, synephrine, and atenolol. Average efficiencies increased with the addition of a chiral oil to R-DDCV PSP formulations. Modest improvements in resolution and enantioselectivity (alpha(enant)) were achieved with two-chiral-component systems over the one-chiral-component microemulsion. Slight enantioselective synergies were confirmed using a thermodynamic model. Results obtained in this study are compared to those obtained in Part 1 as well as those obtained with chiral MEEKC using an achiral, low-interfacial-tension oil (ethyl acetate). Dual-chirality microemulsions with the more hydrophobic oil dibutyl tartrate yielded, relative to diethyl tartrate, higher efficiencies (100,000-134,000 vs. 80,800-94,300), but lower resolution (1.64-1.91 vs. 2.08-2.21) due to lower enantioselectivities (1.060-1.067 vs. 1.078-1.081). Atenolol enantiomers could not be separated with the dibutyl tartrate-based microemulsions but were partially resolved using diethyl tartrate microemulsions. A comparable single-chirality microemulsion based on the achiral oil ethyl acetate yielded, relative to diethyl tartrate, lower efficiency (78 300 vs. 91 600), higher resolution (1.99 vs. 1.83), and similar enantioselectivities.

Investigation of β-CD-derivatized erythromycin as chiral selector in CE

A novel water-soluble beta-CD-derivatized erythromycin (EM) was synthesized and used as an effective chiral selector for the resolution of chiral compounds in CZE. The purpose of substitution at the primary hydroxyl site of beta-CD with 1-oxygen-2,3-epoxypropane is to produce a compound having functions of both beta-CD and EM. beta-CD-derivatized EM exhibited excellent enantioselectivities compared with single beta-CD and EM for chiral separation in CE. We also investigated the influence of pH and concentration of BGE, concentration of chiral selector, applied potential, and organic modifier on chiral compounds' separation.

Quantification of very low enantiomeric impurity of efaroxan using a dual cyclodextrin system by capillary electrophoresis

A rapid method for the enantiomeric purity determination of efaroxan has been developed by capillary electrophoresis (CE) using a dual cyclodextrin (CD) system. The influence of the nature and the concentration of CDs on separation parameters has been studied. High resolution (R(s)=7) and peak efficiency (104,000-121,000 theoretical plates) values were obtained for efaroxan enantiomers by adding two cyclodextrins, one neutral (7.5 mM DM-beta-CD) and the other negatively charged (3 mM CM-beta-CD) to the running buffer composed of 100 mM phosphoric acid-triethanolamine (pH 3). These resolution and peak efficiencies values allowed the quantitation of the (S)-enantiomer of efaroxan at very low enantiomeric excess even if the minor component migrates after the major one. This method was fully validated for the enantiomeric impurity determination of the (S)-form of efaroxan at the 0.05% level. Calibration curve, expressed by the peak areas ratio versus the enantiomeric purity was linear over the 0.05-1% enantiomeric impurity range (r2=0.9996). Limits of detection (LOD) and quantification (LOQ), expressed in term of (S)-enantiomer impurity were 0.02% and 0.05%, respectively. The accuracy of the method at 0.12%, 0.50% and 0.80% enantiomeric impurity levels for the (S)-form were determined. Recoveries were in 94-102% range for each quality control sample and were determined with good precision (intra-day R.S.D.=3.54%, inter-day R.S.D.=5.33%).

Chiral separations by capillary electrophoresis: Recent developments and applications

This paper provides an overview of the different classes of chiral selectors that are used in CE. The main properties of every class are described, together with the mechanism of enantioseparation. Newly introduced selectors are also discussed. Pharmaceutical and biomedical applications published from January 2004 till March 2005 are summarized.

Newly synthesized tetraoxa-diaza crown ether derivatives versus commercialized crown ethers in the separation of positional isomers with capillary electrophoresis

Three new tetraoxa-diaza derivatives of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane (R-1, R-2 and R-3) and three commercially available crown ethers, 18-crown-6 (18C6), (+)-18-crown-6-tetracarboxilic acid (18C6H4) and 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane, were investigated to separate the positional isomers of aminophenol, aminobenzoic acid and aminocresol. The running electrolyte, in which the crown ethers were dissolved, was a 50 mM Tris solution adjusted to pH 2.0 with hydrochloric acid. Using 50 mM H3PO4 buffer, whose pH was adjusted to 2.0 with Tris, or only hydrochloric acid solution with the same pH, did not allow good separations for the tested components. The effect of the crown ether concentration on the separation of the 11 positional isomers was studied in the concentration range of 10-50 mM. The best separations were achieved using the 18C6 and the 18C6H4 crown ethers: 9 isomers out of 11 could be separated within one run. The m- and p-aminophenol isomers could not be separated under the investigated experimental conditions. The newly synthesized tetraoxa-diaza crown ether derivatives were only found suitable for the separation of aminobenzoic acid positional isomers. The macrocyclic ring of the tetraoxa-diaza crown ethers was not able to form a stable inclusion complex with the tested positional isomers. Consequently, the aminophenol and aminocresol isomers were not separated, the isomers migrated with the same or very similar velocities.

Recent advances in pharmaceutical applications of chiral capillary electrophoresis

This review article summarizes developments and applications of chiral capillary electrophoresis (CE) in the pharmaceutical field published from January 2004 to June 2005. Due to the tremendous number of publications, this article is aimed to focus on major developments in chiral separations and some selected applications rather than to provide a descriptive overview of all published papers. Valuable information is also collected from several excellent reviews published during this period. Developments are classified according to CE modes, namely capillary zone electrophoresis (CZE), micellar electrokinetic capillary chromatography (MEKC), microemulsion electrokinetic chromatography (MEEKC). In the CZE section, different types of chiral selectors including cyclodextrins, oligo- and polysaccharides, crown ethers, macrocyclic antibiotics, ligand exchange systems and proteins are described. Nonaqueous capillary electrophoresis is also included in this section. Coupling CE to MS is discussed in a separate part, followed by a summary of selected pharmaceutical applications of enantioselective CE. Finally, some conclusions are drawn and prospects of CE in chiral analysis are also drafted.

Recent advances in amino acid analysis by capillary electrophoresis

This paper describes a number of articles that have been published on amino acid analysis using CE during the period from June 2003 to May 2005. This review article follows the previous ones of Smith (Electrophoresis 1999, 20, 3078-3083), Prata et al. (Electrophoresis 2001, 22, 4129-4138), and Poinsot et al. (Electrophoresis 2003, 24, 4047-4062). Several new developments in amino acid analysis with CE are reported concerning UV detection, LIF, MS, and NMR. In addition, we describe articles concerning clinical and pharmaceutical studies, neuroclinical applications, and agricultural and food analysis.

Recent advances in chiral separation principles in capillary electrophoresis and capillary electrochromatography

This review summarizes recent developments in chiral separation in capillary zone electrophoresis (CZE), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC) covering literature published since the year 2000. New chiral selectors and innovative approaches for CE and CEC are introduced. Recent progress in column technology for CEC is highlighted and the development of new chiral stationary phases is discussed. This review is not dedicated to list applications but will focus on new developments.

Enantioselective capillary electrophoretic separation of tryptophane- and tyrosine-methylesters in a dual system with a tetra-oxadiaza-crown-ether derivative and a cyclodextrin

Different dual selector systems containing a cyclodextrin derivative (methyl-beta-cyclodextrin and dimethyl-beta-cyclodextrin) and a new diaza-crown-ether derivative (N-[2-(1,4,10,13-tetraoxa-7,16-diazacyclooctadecan-7-yl)propanoyl]glycine) were studied in the enantioselective separation of tryptophan-methylester and tyrosine-methylester enantiomers. This paper deals with the systematic study of the effects of changing the composition of the background electrolyte on the resolution of the d- and l- forms using an experimental design approach. It was found that the dual systems allowed a better chiral separation of the amino acid derivatives. The experimental design approach also allowed improving the separation compared to the starting conditions (center point of the design), which were adopted from a previous study.