Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid phase microextraction coupled to high performance liquid chromatography and analysis of amphetamines in urine samples

Carboxyl hybrid monolithic column in-tube solid-phase microextraction coupled with UPLC-QTRAP MS/MS for the determination of amphetamine-type stimulants

A carboxyl functionalized organic-inorganic hybrid monolithic column (TMOS-co-CES) was applied as in-tube solid-phase microextraction (SPME) sorbent combining with ultra-performance liquid chromatography-triple quadrupole/linear ion trap mass spectrometer for separation and analyzation of seven typical amphetamine-type stimulants (ATSs), including amphetamine (AM), methamphetamine (MAM), cathinone, methcathinone, 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine and 3,4-methylenedioxyethylamphetamine. The application potential of TMOS-co-CES material to ATSs was preliminarily confirmed by computational simulation by using cathinone as a representative. The influences of various SPME parameters and analytical performance were investigated systematically. As matched with the results of computational simulation, TMOS-co-CES column could capture ATSs under milder near neutral pH condition with high extraction efficiency basing on the adsorption mechanism explained as a mixed mode of electrostatic and hydrophobic interactions. Seven target trace ATSs in spiked sewage, pond water and urine could be rapidly and conveniently separated and enriched by the proposed TMOS-co-CES in-tube SPME method under the optimized conditions with good accuracy, repeatability and resistance to matrix interference. Moreover, AM and MAM had been successfully detected in real urines of suspected drug abusers by TMOS-co-CES in-tube SPME method, which indicated that the proposed method had good application feasibility for drug monitoring. The mild extraction condition and ideal method performance further made the TMOS-co-CES in-tube SPME method more potential in applications for forensic analysis and drug abuse.

Quantitative determination of amphetamine-type stimulants in sewage and urine by hybrid monolithic column solid-phase microextraction coupled with UPLC-QTRAP MS/MS

A needle-solid-phase microextraction (SPME) method based on hybrid monolithic column (HMC) was proposed for simultaneous separation and extraction of seven amphetamine-type stimulants (ATSs) (amphetamine, methamphetamine, cathinone, methcathinone, 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine, and 3,4-methylenedioxyethylamphetamine), combining with ultra-performance liquid chromatography-triple quadrupole/linear ion trap mass spectrometer (UPLC-QTRAP MS/MS). Thiol functionalized HMC (T-HMC) showed high extraction efficiency and excellent elution results towards target analytes, among three kinds of single/bi-functionalized HMCs. Various parameters of SPME operation and analytical performance were investigated systematically. The adsorption mechanism of T-HMC to ATSs was also discussed and explained as a mixed mode of electrostatic and hydrophobic interactions. Under the optimum experimental conditions, the proposed T-HMC needle-SPME-UPLC-QTRAP MS/MS method was rapid and convenient with good accuracy, low sample consumption, high sensitivity and strong anti-interference ability. This method was successfully applied to quantitative determination of seven trace ATSs in complex sewage and urine samples. In view of abundant types of HMCs, the needle-SPME based on functional HMC also had the potential to selectively separating and enriching other tract new psychoactive substances in complex matrices, and could provide a reliable tool for drug monitoring, especially in applications for forensic analysis and drug abuse.

Enrichment of psychotropic drugs using rhamnolipid bioaggregates after electromembrane extraction based on an agarose gel using a rotating electrode as a green and organic solvent-free strategy

We here present an efficient approach for the tandem extraction of psychotropic drugs using biodegradable materials. In this regard, gel electromembrane extraction (G-EME) was combined with the emulsification-based microextraction (ME) technique by rhamnolipid bioaggregates as a green extraction approach. The tandem extraction technique consists of two stages: (i) extraction of psychotropic drugs from human urine samples to the acceptor phase situated on the other side of the agarose gel membrane, and (ii) transfer of analytes from the acceptor phase into a colloidal phase of rhamnolipid biosurfactants. The colloidal phase was formed by adding rhamnolipid biosurfactants to the extracted phase of the first step. The colloidal phase was finally injected into a liquid chromatographic system for quantitative analysis. G-EME mechanism is based on electrokinetic migration of charged species toward oppositely charged electrode located in the acceptor solution under the influence of the electric field. After extraction, the analytes were trapped in an emulsion phase floating on the surface of the solution and at the end were injected into the liquid chromatographic system. The method provided good linearity in the ranges of 5-100 and 10-100 μg. L^-1 for methamphetamine and amphetamine, respectively with (r² > 0.992). Also, the detection limits (LODs) were 1 and 5 μg. L^-1 for methamphetamine and amphetamine, respectively. The mean extraction recoveries by G-EME-ME for real samples at three spiked concentrations were in the range 95.9-101.1% and complete analytical workflow within only 18 min.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Stir bar sorptive extraction and its application

Recent progress of stir bar sorptive extraction (SBSE) in the past six years is reviewed. The preparation methods including electrodeposition, self-assembly, solvent exchange, physical magnetic adsorption and electrostatic spinning, for the coated stir bar are summarized and compared, specifically for a specific material for coatings fabrication, e.g., carbon-based materials and metal organic frameworks. The emerging materials (e.g., graphene, graphene oxide, carbon nanotubes, monolith, metal-organic frameworks and porous organic polymers) applied for coated stir bar fabrication are one of the focus of this review, along with their respective advantages in extraction process and application in trace analysis. The development and application of extraction apparatus of SBSE are also involved. Based on these information, the development status and prospects of SBSE as an efficient sample pretreatment technique in real sample analysis are discussed.

Bioanalytical HPLC Applications of In-Tube Solid Phase Microextraction: A Two-Decade Overview

In-tube solid phase microextraction is a cutting-edge sample treatment technique offering significant advantages in terms of miniaturization, green character, automation, and preconcentration prior to analysis. During the past years, there has been a considerable increase in the reported publications, as well as in the research groups focusing their activities on this technique. In the present review article, HPLC bioanalytical applications of in-tube SPME are discussed, covering a wide time frame of twenty years of research reports. Instrumental aspects towards the coupling of in-tube SPME and HPLC are also discussed, and detailed information on materials/coatings and applications in biological samples are provided.

Electrospun polyamide/graphene oxide/polypyrrole composite nanofibers: an efficient sorbent for headspace solid phase microextraction of methamphetamine in urine samples followed by GC-MS analysis

A novel polyamide/graphene oxide/polypyrrole nanofiber was fabricated with the aid of the electrospinning technique and applied in headspace solid phase microextraction.

Homogeneous and high-density gold unit implanted optical labels for robust and sensitive point-of-care drug detection

Controllable integration of gold building blocks into mesoscopic architecture produces improved optical signals with preferable stability for biological sensing. Here, we developed novel optical labels with homogeneous and high-density implanted hydrophobic gold nanoparticles (AuNPs) throughout three-dimensional silica scaffolds. The dendritic silica supports with an extra-large pore size and highly accessible central-radial channels were employed as metal-affinity templates, for anchoring with AuNPs directly from the organic phase. The nano-assemblies exhibited a high unit loading capacity while maintaining the intrinsic optical characteristics of AuNPs. After phase transfer by the alkylsilane intermediate layer and exterior silica shell encapsulation, the nanocomposites revealed an amplified plasmonic absorption signal, excellent colloidal/optical stability and convenient surface functionalization. By integrating the silica labels into the lateral flow immunoassay strip for signal enhancement, the sensitive point-of-care detection of methamphetamine in urine was established. The limit of detection achieved 0.026 ng mL-1, with a detection range from 0.023 to 375 ng mL-1 in a 10 min assay, allows both visual and on-site quantitative analysis. Encouragingly, the potential interfering drugs in the sample matrix showed a negligible influence on the results, validating the superior specificity of the current immunoassay. The newly developed gold-implanted optical labels show prospects for point-of-care testing in a complex biological matrix with the desirable stability and signal amplification.

Butyl Methacrylate-Co-Ethylene Glycol Dimethacrylate Monolith for Online in-Tube SPME-UHPLC-MS/MS to Determine Chlopromazine, Clozapine, Quetiapine, Olanzapine, and Their Metabolites in Plasma Samples

This manuscript describes a sensitive, selective, and online in-tube solid-phase microextraction coupled with an ultrahigh performance liquid chromatography-tandem mass spectrometry (in-tube SPME-UHPLC-MS/MS) method to determine chlopromazine, clozapine, quetiapine, olanzapine, and their metabolites in plasma samples from schizophrenic patients. Organic poly(butyl methacrylate-co-ethylene glycol dimethacrylate) monolith was synthesized on the internal surface of a fused silica capillary (covalent bonds) for in-tube SPME. Analyte extraction and analysis was conducted by connecting the monolithic capillary to an UHPLC-MS/MS system. The monolith was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectrometry (FTIR). The developed method presented adequate linearity for all the target antipsychotics: R² was higher than 0.9975, lack-of-fit ranged from 0.115 to 0.955, precision had variation coefficients lower than 14.2%, and accuracy had relative standard error values ranging from -13.5% to 14.6%, with the exception of the lower limit of quantification (LLOQ). The LLOQ values in plasma samples were 10 ng mL^-1 for all analytes. The developed method was successfully applied to determine antipsychotics and their metabolites in plasma samples from schizophrenic patients.

Development of a new pH assisted homogeneous liquid-liquid microextraction by a solvent with switchable hydrophilicity: Application for GC-MS determination of methamphetamine

In this study, a new method based on homogeneous liquid-phase microextraction was developed for the determination of methamphetamine (MA) in urine samples. Dipropylamine (DPA), as a solvent with switchable hydrophilicity, was used as the extraction solvent and can be miscible/immiscible based on variable pH values of the aqueous sample solution. The effects of operational extraction parameters such as DPA volume, temperature, the amount of added acid and base solutions, and NaCl content of the sample were investigated. Under optimal conditions the preconcentration factor, limit of detection and linearity of the method were achieved in the ranges of 98.8, 1.5 µgL^-1 and 5-1500 µgL^-1, respectively. Also, within-run precision, between-run precision and robustness of the method were investigated. Finally, the proposed method was successfully applied to the analysis of MA in urine sample.

Determination of formylated DNA and RNA by chemical labeling combined with mass spectrometry analysis

Nucleic acids carry diverse chemical modifications that exert critical influences in a variety of cellular processes in living organisms. In addition to methylation, the emerging DNA and RNA formylation has been reported to play functional roles in various physiological processes. However, the amounts of formylated DNA and RNA are extremely low and detection of DNA and RNA formylation is therefore a challenging task. To address this issue, we developed a strategy by chemical labeling combined with in-tube solid-phase microextraction - ultra high performance liquid chromatography - electrospray ionization - tandem mass spectrometry (in-tube SPME-UPLC-ESI-MS/MS) analysis for the sensitive determination of DNA and RNA formylation. Using the developed method, we were able to simultaneously measure six formylated nucleosides, including 5-formyl-2'-deoxycytidine (5-fodC), 5-formylcytidine (5-forC), 5-formyl-2'-deoxyuridine (5-fodU), 5-formyluridine (5-forU), 2'-O-methyl-5-formylcytidine (5-forCm) and 2'-O-methyl-5- formyluridine (5-forUm), from DNA and RNA of cultured human cells and multiple mammalian tissues. The detection limits of these formylated nucleosides improved by 307-884 folds using Girard's P (GirP) labeling coupled with in-tube SPME-UPLC-ESI-MS/MS analysis. It was worth noting that 5-forU, 5-forCm and 5-forUm which have not been detected in human sample before, were discovered in cultured human cells and tissues in the current study. In addition, we observed significant increase of 5-forC and 5-forU in RNA (p = 0.027 for 5-forC; p = 0.028 for 5-forU) and 5-fodU in DNA (p = 0.002) in human thyroid carcinoma tissues compared to normal tissues adjacent to the tumor using synthesized stable isotope GirP (d₅-GirP)-assisted quantification. Our results indicated that aberrant DNA and RNA formylation may contribute to the tumor formation and development. In addition, monitoring of DNA and RNA formylation may also serve as indicator for cancer diagnostics. Taken together, the developed chemical labeling combined with in-tube SPME-UPLC-ESI-MS/MS analysis can facilitate the in-depth functional study of DNA and RNA formylation.

Combination of counter current salting-out homogenous liquid-liquid extraction and dispersive liquid-liquid microextraction as a novel microextraction of drugs in urine samples

The counter current salting-out homogenous liquid-liquid extraction (CCSHLLE) joined with the dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) has been developed as a high preconcentration technique for the determination of different drugs in urine samples. Amphetamines were employed as model compounds to assess the extraction procedure and were determined by high performance liquid chromatography-ultraviolet detection (HPLC-UV). In this method, initially, NaCl as a separation reagent is filled into a small column and a mixture of urine and acetonitrile is passed through the column. By passing the mixture, NaCl is dissolved and the fine droplets of acetonitrile are formed due to salting-out effect. The produced droplets go up through the remained mixture and collect as a separated layer. Then, the collected acetonitrile is removed with a syringe and mixed with 30.0μL 1-undecanol (extraction solvent). In the second step, the 5.00mLK2CO3 solution (2% w/v) is rapidly injected into the above mixture placed in a test tube for further DLLME-SFO. Under the optimum conditions, calibration curves are linear in the range of 1-3000μgL(-1) and limit of detections (LODs) are in the range of 0.5-2μgL(-1). The extraction recoveries and enrichment factors ranged from 78 to 84% and 157 to 168, respectively. Repeatability (intra-day) and reproducibility (inter-day) of method based on seven replicate measurements of 100μgL(-1) of amphetamines were in the range of 3.5-4.5% and 4-5%, respectively. The method was successfully applied for the determination of amphetamines in the actual urine samples. The relative recoveries of urine samples spiked with amphetamine and methamphetamine are 90-108%.

Determination of amphetamines in biological samples using electro enhanced solid-phase microextraction-gas chromatography

In this work, an ordered mesoporous carbon (OMC)/Nafion coated fiber for solid-phase microextraction (SPME) was prepared and used as the working electrode for electro-enhanced SPME (EE-SPME) of amphetamines. The EE-SPME strategy is primarily based on the electro-migration and complementary charge interaction between fiber coating and ionic compounds. Compared with traditional SPME, EE-SPME exhibited excellent extraction efficiency for amphetamine (AP) and methamphetamine (MA) with an enhancement factor of 7.8 and 12.1, respectively. The present strategy exhibited good linearity for the determination of AP and MA in urine samples in the range of 10-1000ngmL(-1) and 20-1000ngmL(-1), respectively. The detection limits were found to be 1.2ngmL(-1) for AP and 4.8ngmL(-1) for MA. The relative standard deviations were calculated to be 6.2% and 8.5% for AP and MA, respectively. Moreover, the practical application of the proposed method was demonstrated by analyzing the amphetamines in urine and serum samples with satisfactory results.

A new strategy to eliminate sample mixing during in-tube solid phase microextraction

During in-tube solid phase microextraction, sample mixing with mobile phase contained in the autosampler tubing during extraction may result in some amount of sample becoming entrained in the mobile phase rather than returning to the sample vial or being directed to waste after extraction. In cases where target analytes have relatively low affinity for the sorbent on the wall of the capillary, mixing can impact data quality. Where the sample contains components that may interfere with either the separation (e.g. proteins) or detection (e.g. ions with MS detection), additional difficulties can arise. In the current research, the magnitude of the sample mixing effect was illustrated by analyzing ranitidine and a series of polycyclic aromatic hydrocarbons (PAH). The sample volume equivalent of mixing was calculated as 37 μL for ranitidine and 20 μL for PAHs using the same inner diameter of capillary. To address this issue, a novel approach involving adding a switching valve located between the metering pump and the capillary was developed. Capillary flush conditions, draw/eject speed and extraction time were optimized for ranitidine with the result that in the final method, no mixing of sample with mobile phase was apparent in the detected amounts. To provide information on a compound class with intermediate polarity, two -blockers were also extracted using the optimized washing conditions respectively. The results indicated that the issue of sample mixing had been resolved for these as well. Finally, in-tube SPME calibration of these three analyte classes was shown to be highly linear, providing further indication that sample mixing was not impacting data quality. Available literature on the subject was surveyed, and a discussion on the rational selection of conditions to guide method development was also provided.

Rapid extraction and determination of amphetamines in human urine samples using dispersive liquid-liquid microextraction and solidification of floating organic drop followed by high performance liquid chromatography

A novel, rapid, simple and sensitive dispersive liquid-liquid microextraction method based on the solidification of floating organic drop (DLLME-SFO) combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) was used to determine amphetamine and methamphetamine in urine samples. The factors affecting the extraction efficiency of DLLME-SFO such as the kind and volume of the extraction and the disperser solvents, effect of concentration of K2CO3 and extraction time were investigated and the optimal extraction conditions were established. Under the optimum conditions (extraction solvent: 30.0μl 1-undecanol; disperser solvent: 300μl acetonitrile; buffer concentration: 2% (w/v) K2CO3 and extraction time: 1min), calibration curves are linear in the range of 10-3000μgl(-1) and limit of detections (LODs) are in the range of 2-8μgl(-1). The relative standard deviations (RSDs) for 100μgl(-1) of amphetamine and methamphetamine in diluted urine are in the range of 6.2-7.8% (n=7). The method was successfully applied for the determination of amphetamine and methamphetamine in the actual urine samples. The relative recoveries of urine samples spiked with amphetamine and methamphetamine are 87.8-113.2%. The obtained results show that DLLME-SFO combined with HPLC-UV is a fast and simple method for the determination of amphetamine and methamphetamine in urine.

Highly sensitive and quantitative profiling of acidic phytohormones using derivatization approach coupled with nano-LC-ESI-Q-TOF-MS analysis

In current study, we developed a highly sensitive method for the quantitative profiling of acidic phytohormones. Tandem solid-phase extraction (SPE) and liquid-liquid extraction (LLE) was employed to efficiently purify acidic phytohormones, which were further derived by 3-bromoactonyltrimethylammonium bromide (BTA) to increase the ionization efficiency in electrospray ionization-mass spectrometry detection. Additionally, fifteen BTA-derived acidic phytohormones, including ten gibberellins (GAs), were well separated with a salt gradient on poly(methacrylic acid-co-ethylene glycol dimethacrylate) (MAA-co-EDMA) monolithic column. By employing online trapping system, the signal intensities of the analytes were significantly improved. The limits of detection (LODs, Signal/Noise=3) of targeted phytohormones ranged from 1.05 to 122.4 pg/mL, which allowed the highly sensitive determination of low abundant acidic phytohormones with tiny amount plant sample. Good reproducibility was obtained by evaluating the intra- and inter-day precisions with relative standard deviations (RSDs) less than 10.9 and 11.9%, respectively. Recoveries of the target analytes from spiked rice leave samples ranged from 88.3 to 104.3%. By employing the method developed here, we were able to simultaneously determine 11 endogenous acidic phytohormones from only 5mg of rice leave sample, which dramatically decreased the required sample amount (three orders of magnitude lower) for the profiling of low abundant acidic phytohormones compared to previous reports. Taken together, the method provided a good solution for the highly sensitive and quantitative profiling of endogenous acidic phytohormones.

Role of microextraction sampling procedures in forensic toxicology

The last two decades have provided analysts with more sensitive technology, enabling scientists from all analytical fields to see what they were not able to see just a few years ago. This increased sensitivity has allowed drug detection at very low concentrations and testing in unconventional samples (e.g., hair, oral fluid and sweat), where despite having low analyte concentrations has also led to a reduction in sample size. Along with this reduction, and as a result of the use of excessive amounts of potentially toxic organic solvents (with the subsequent environmental pollution and costs associated with their proper disposal), there has been a growing tendency to use miniaturized sampling techniques. Those sampling procedures allow reducing organic solvent consumption to a minimum and at the same time provide a rapid, simple and cost-effective approach. In addition, it is possible to get at least some degree of automation when using these techniques, which will enhance sample throughput. Those miniaturized sample preparation techniques may be roughly categorized in solid-phase and liquid-phase microextraction, depending on the nature of the analyte. This paper reviews recently published literature on the use of microextraction sampling procedures, with a special focus on the field of forensic toxicology.

High-throughput polymer monolith in-tip SPME fiber preparation and application in drug analysis

Background: A simple, low-cost and reproducible automated procedure has been developed to prepare in-tip solid-phase microextraction (SPME) fibers coated with polymer monoliths using a photopolymerization technique. Up to 96 fibers were prepared at one time using a polymerization mixture consisting of ethylene glycol dimethacrylate, dimethoxy-α-phenylacetophenone and 1-decanol. Results: The optimization procedures that affected polymer morphology, such as compositions of the crosslinkers and porogens, polymerization time and fiber thickness as well as extraction efficiency of the immobilized Oasis hydrophilic-lipophilic-balanced extraction sorbent were investigated. Also, the reproducibility of automated in-tip SPME fiber preparation, as well as sample process parameters, such as sample extraction and desorption volumes, are discussed. Conclusion: The performance of the polymer monoliths in-tip SPME assessed with a model drug compound from clinical studies and a head-to-head comparison using in-tip SPME and conventional SPE clearly demonstrated that the SPME is a feasible approach for routine drug analysis in the pharmaceutical industry.

Novel strategies for sample preparation in forensic toxicology

This paper provides a review of novel strategies for sample preparation in forensic toxicology. The review initially outlines the principle of each technique, followed by sections addressing each class of abused drugs separately. The novel strategies currently reviewed focus on the preparation of various biological samples for the subsequent determination of opiates, benzodiazepines, amphetamines, cocaine, hallucinogens, tricyclic antidepressants, antipsychotics and cannabinoids. According to our experience, these analytes are the most frequently responsible for intoxications in Greece. The applications of techniques such as disposable pipette extraction, microextraction by packed sorbent, matrix solid-phase dispersion, solid-phase microextraction, polymer monolith microextraction, stir bar sorptive extraction and others, which are rapidly gaining acceptance in the field of toxicology, are currently reviewed.