Determination of phthalates in water samples using polyaniline-based solid-phase microextraction coupled with gas chromatography

A Hybrid Stainless-Steel SPME Microneedle Electrode Sensor for Dual Electrochemical and GC-MS Analysis

A mechanically robust in-tube stainless steel microneedle solid phase microextraction (SPME) platform for dual electrochemical and chromatographic detection has been demonstrated. The SPME microneedle was fabricated by layer-by-layer (LbL) in-tube coating, consisting of carbon nanotube (CNT)/cellulose nanocrystal (CNC) film layered with an electrically conductive polyaniline (PANI) hydrogel layer (PANI@CNT/CNC SPME microneedle (MN)). The PANI@CNT/CNC SPME MN showed effective analysis of caffeine by GC-MS with an LOD of 26 mg/L and excellent precision across the dynamic range. Additionally, the PANI@CNT/CNC SPME MN demonstrated a 67% increase in sensitivity compared to a commercial SPME fiber, while being highly robust for repeated use without loss in performance. For electrochemical detection, the PANI@CNT/CNC SPME MN showed excellent performance for the detection of 3-caffeoylquinic acid (3-CQA). The dynamic range and limits of detection (LOD) for 3-CQA analysis were 75-448 mg/L and 11 mg/L, respectively. The PANI@CNT/CNC SPME MN was demonstrated to accurately determine the caffeine content and 3-CQA in tea samples and dark roast coffee, respectively. The PANI@CNT/CNC SPME MN was used for semiquantitative antioxidant determination and composition analysis in kiwi fruit using electrochemistry and SPME-coupled GC-MS, respectively.

Polyaniline and Polyaniline-Based Materials as Sorbents in Solid-Phase Extraction Techniques

Polyaniline (PANI) is one of the best known and widely studied conducting polymers with multiple applications and unique physicochemical properties. Due to its porous structure and relatively high surface area as well as the affinity toward many analytes related to the ability to establish different types of interactions, PANI has a great potential as a sorbent in sample pretreatment before instrumental analyses. This study provides an overview of the applications of polyaniline and polyaniline composites as sorbents in sample preparation techniques based on solid-phase extraction, including conventional solid-phase extraction (SPE) and its modifications, solid-phase microextraction (SPME), dispersive solid-phase extraction (dSPE), magnetic solid-phase extraction (MSPE) and stir-bar sorptive extraction (SBSE). The utility of PANI-based sorbents in chromatography was also summarized. It has been shown that polyaniline is willingly combined with other components and PANI-based materials may be formed in a variety of shapes. Polyaniline alone and PANI-based composites were successfully applied for sample preparation before determination of various analytes, both metal ions and organic compounds, in different matrices such as environmental samples, food, human plasma, urine, and blood.

Ionic liquid-functionalized poly-N-phenylpyrrole coated on a NiTi alloy substrate for highly efficient solid-phase microextraction

TiO2–NiO composite nanoflakes were in situ grown, followed by electrochemical polymerization of [C4MIM]PF6@PPPy as a fiber coating for solid phase microextraction.

Competitive adsorption of Dibutyl phthalate (DBP) and Di(2-ethylhexyl) phthalate (DEHP) onto fresh and oxidized corncob biochar

Phthalates (PAEs) often exist simultaneously in contaminated soil and wastewater systems, and their adsorption to biochar might impact their behavior in the environment. So far, the competitive adsorption of PAEs to biochar has not been reported. In this study, the competitive adsorption of Dibutyl phthalate (DBP) and Di(2-ethylhexyl) phthalate (DEHP) on corncob biochar (fresh and oxidized) was investigated, and experiments of kinetics, isotherms, and thermodynamics were conducted. Langmuir and Freundlich models, pseudo-first-order and second-order kinetic models were used to simulate the experimental data. In the mono PAEs component systems, the biochar showed significantly greater adsorption capacity for DEHP (11.8-16.16 mg g^-1) than for DBP (9.86-13.2 mg g^-1). The oxidized biochar has higher adsorption capacities than the fresh one. Moreover, a fast adsorption rate for DBP was observed, which can be attributed to the smaller size and shorter carbon chains in the DBP molecule, resulting in faster diffusion into the biochar pores. In the binary PAEs component systems, competition between DEHP and DBP in their adsorption to the biochars was observed, and DEHP (11.7-15.0 mg g^-1) was preferred over DBP (3.4-7.9 mg g^-1). The stronger adsorption of DEHP can be explained by stronger hydrophobic interaction with biochar. Compared to DBP, DEHP has a high octanol-water partition coefficient (logK_ow) and low water solubility. The positive entropy (ΔS⁰) and enthalpy(ΔH⁰) values for the adsorption of both DEHP and DBP further indicated that hydrophobic interaction played an important role, even though H-bonds and π-π interactions could also be involved.

Occurrence, removal, and environmental risk of phthalates in wastewaters, landfill leachates, and groundwater in Poland

Phthalates or phthalic acid esters (PAEs) are chemical compounds whose use is exceptionally widespread in everyday materials but, at the same time, have been proven to have harmful effects on living organisms. Effluents from municipal wastewater treatment plants (WWTP) and leachates from municipal solid waste (MSW) landfills are important sources of phthalates with respect to naturally occurring waters. The main aim of this research was determination, mass loads, removal rates and ecological risk assessment of eight phthalates in municipal wastewaters, landfill leachates and groundwater from Polish WWTPs and MSW landfills. Solid-phase microextraction and gas chromatography with mass spectrometry were used for the extraction and determination of analytes. Summed up concentrations of eight phthalates ranged from below LOD to 596 μg/L in influent wastewater with the highest concentration found for bis-2-ethylhexyl phthalate (DEHP) (143 μg/L). The average degree of phthalate removal varies depending on the capacity of a given treatment plant with larger treatment plants coping better than smaller ones. The highest treatment efficiency for all tested treatment plants, over 90%, was reported for dimethyl phthalate (DMP) and diethyl phthalate (DEP). Overall concentrations of phthalates in leachates ranged from below LOD to 303 μg/L while the highest maximum concentration was registered for DEHP (249 μg/L). Overall concentrations of phthalic acid esters in groundwater from upstream monitoring wells ranged from below LOD to 1.8 μg/L and from LOD to 27.9 μg/L in samples from wells downstream of MSW landfills. The obtained data shows that diisobutyl phthalate (DIBP), dibutyl phthalate (DBP), DEHP, and diisononyl phthalate (DINP) pose a high risk for all trophic levels being considered in effluent wastewaters. In the case of groundwater high environmental risk was recorded for DBP and DEHP for all tested trophic levels. Phthalates, in concentrations that pose a high environmental risk, are present in Polish municipal after-treatment wastewater as well as in groundwater under municipal solid waste landfills.

Electrochemically Fabricated Solid Phase Microextraction Fibers and Their Applications in Food, Environmental and Clinical Analysis

Background:

Designing an analytical methodology for complicated matrices, such as biological and environmental samples, is difficult since the sample preparation procedure is the most demanding step affecting the whole analytical process. Nowadays, this step has become more challenging by the legislations and environmental concerns since it is a prerequisite to eliminate or minimize the use of hazardous substances in traditional procedures by replacing with green techniques suitable for the sample matrix.

Methods:

In addition to the matrix, the nature of the analyte also influence the ease of creating green analytical techniques. Recent developments in the chemical analysis provide us new methodologies introducing microextraction techniques and among them, solid phase microextraction (SPME) has emerged as a simple, fast, low cost, reliable and portable sample preparation technique that minimizes solvent consumption.

Results:

The use of home-made fibers is popular in the last two decades since the selectivity can be tuned by changing the surface characteristics through chemical and electrochemical modifications. Latter technique is preferred since the electroactive polymers can be coated onto the fiber under controlled electrochemical conditions and the film thicknesses can be adjusted by simply changing the deposition parameters. Thermal resistance and mechanical strength can be readily increased by incorporating different dopant ions into the polymeric structure and selectivity can be tuned by inserting functional groups and nanostructures. A vast number of analytes with wide range of polarities extracted by this means can be determined with a suitable chromatographic detector coupled to the system. Therefore, the main task is to improve the physicochemical properties of the fiber along with the extraction efficiency and selectivity towards the various analytes by adjusting the electrochemical preparation conditions.

Conclusion:

This review covers the fine tuning conditions practiced in electrochemical preparation of SPME fibers and in-tube systems and their applications in environmental, food and clinical analysis.

Assessment of Concentrations of Heavy Metals and Phthalates in Two Urban Rivers of the Northeast of Puerto Rico

Urbanization adjacent to rivers has increased in recent years and is considered a source of environmental contamination. The resulting increase in number of urban rivers in highly populated areas, such as the Caribbean island of Puerto Rico, has led to the appearance of synthetic as well as naturally occurring chemicals not previously observed nor regularly monitored in freshwater habitats. Some of these chemicals, such as heavy metals and plasticizers, have been shown to affect endocrine, respiratory, and nervous system function in animals and humans, even at relatively low concentrations. The purpose of this study was to measure concentrations of such emergent contaminants on rivers of urbanized areas on the northeast of Puerto Rico, as one element in the assessment of the impact of urbanism on water quality in these communities. To accomplish this, we used Inductively Coupled Plasma and Gas Chromatography Mass Spectrometry to measure amounts of heavy metals and phthalates, respectively, in superficial water of three rivers of Puerto Rico: Mameyes (non-urban), Río Piedras (urban river without a dam), and La Plata (urban river with a dam). The urban rivers had significantly higher concentrations of heavy metals arsenic, barium, cadmium, manganese, and antimony, when compared with the reference non-urban river. Manganese was the only metal found in concentrations higher than limits established by the EPA for drinking water. Of eight phthalates amenable to measurement with the chosen protocol and instrumentation, only dibutyl phthalate was detected, only in the La Plata river, and at concentrations ranging from 3 to 8 parts-per-billion. These findings suggest that urbanism close to rivers of Puerto Rico is likely having an impact on water quality and thus further study to identify the potential sources, as well as the inclusion of these emergent contaminants on the list of chemicals regularly monitored by government agencies is justified.

Phenols, flame retardants and phthalates in water and wastewater - a global problem

Organic pollutants in water and wastewater have been causing serious environmental problems. The arbitrary discharge of wastewater by industries, and handling, use, and disposal constitute a means by which phenols, flame retardants (FRs), phthalates (PAEs) and other toxic organic pollutants enter the ecosystem. Moreover, these organic pollutants are not completely removed during treatment processes and might be degraded into highly toxic derivatives, which has led to their occurrence in the environment. Phenols, FRs and PAEs are thus highly toxic, carcinogenic and mutagenic, and are capable of disrupting the endocrine system. Therefore, investigation to understand the sources, pathways, behavior, toxicity and exposure to phenols, FRs and PAEs in the environment is necessary. Formation of different by-products makes it difficult to compare the efficacy of the treatment processes, most especially when other organic matters are present. Hence, high levels of phenols, FRs and PAEs removal could be attained with in-line combined treatment processes.

Estimation of the presence of unmetabolized dialkyl phthalates in untreated human urine by an on-line miniaturized reliable method

At present, human exposure to dialkyl phthalates is assessed through urinary measurement of their metabolites due mainly to contamination in their analysis by their ubiquitous presence. An on-line miniaturized method and the processing of the untreated urine samples have been the key factors for minimizing contamination and achieving unbiased results. Di(2-ethylhexyl) (DEHP), diethyl (DEP), dibutyl (DBP) and mono-ethylhexyl (MEHP) phthalates in urine samples have been included in the study; MEHP as metabolite of the main dialkyl phthalate such as DEHP. On-line in-tube solid-phase microextraction (IT-SPME)-capillary liquid chromatography (CapLC) with diode array detection (DAD) is employed. The detection limits (LODs) achieved in urine were between 0.5 and 1.5 μg/L. Eighteen urines were processed. DBP and DEHP were found in nine and five samples, respectively and DEP in three of them. MEHP was only detected in one of the eighteen samples analyzed.

Chlorophenol's ultra-trace analysis in environmental samples by chitosan-zinc oxide nanorod composite as a novel coating for solid phase micro-extraction combined with high performance liquid chromatography

In this study, a simple, novel, and efficient preconcentration method has been developed for the determination of some chlorophenols (4-chlorophenol, 2,5-dichlorophenol, 2,3-dichlorophenol, and 2,4,6-trichlorophenol) using a direct solid phase microextraction (D-SPME) based on chitosan-ZnO nanorod composite combined with high performance liquid chromatography (HPLC). A one step-novel hydrothermal method was demonstrated on the fabrication of ZnO nanorods arrayed on the fused silica fiber in the chitosan hydrogel solution (CZNC) as a new coating of SPME fiber. The coating was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) instruments. The CZNC coating has combined the merits of both ZnO nanorods and chitosan hydrogel; it has several improvements such as increased extraction efficiency of chlorophenols and longer life time (over 80 cycles of D-SPME-HPLC operation). Experimental design method was used for optimization of extraction conditions and determination of four chlorophenols in water samples by SPME-HPLC-UV method. The calibration curves were linear from 5 to 1000 µg L(-1) for analytes, and the limits of detection were between 0.1 and 2 µg L(-1). Single fiber repeatability and fiber-to-fiber reproducibility were in the range of 5.8-10.2% and 8.8-14.5%, respectively. The spiked recoveries at 50 µg L(-1) for environmental water sample were in the range of 93-102%.

Reliable quantification of phthalates in environmental matrices (air, water, sludge, sediment and soil): a review

Because of their widespread application, phthalates or phthalic acid esters (PAEs) are ubiquitous in the environment. Their presence has attracted considerable attention due to their potential impacts on ecosystem functioning and on public health, so their quantification has become a necessity. Various extraction procedures as well as gas/liquid chromatography and mass spectrometry detection techniques are found as suitable for reliable detection of such compounds. However, PAEs are ubiquitous in the laboratory environment including ambient air, reagents, sampling equipment, and various analytical devices, that induces difficult analysis of real samples with a low PAE background. Therefore, accurate PAE analysis in environmental matrices is a challenging task. This paper reviews the extensive literature data on the techniques for PAE quantification in natural media. Sampling, sample extraction/pretreatment and detection for quantifying PAEs in different environmental matrices (air, water, sludge, sediment and soil) have been reviewed and compared. The concept of "green analytical chemistry" for PAE determination is also discussed. Moreover useful information about the material preparation and the procedures of quality control and quality assurance are presented to overcome the problem of sample contamination and these encountered due to matrix effects in order to avoid overestimating PAE concentrations in the environment.

Online in-tube microextractor coupled with UV-Vis spectrophotometer for bisphenol A detection

A simple and high extraction efficiency online in-tube microextractor (ITME) was developed for bisphenol A (BPA) detection in water samples. The ITME was fabricated by a stepwise electrodeposition of polyaniline, polyethylene glycol and polydimethylsiloxane composite (CPANI) inside a silico-steel tube. The obtained ITME coupled with UV-Vis detection at 278 nm was investigated. By this method, the extraction and pre-concentration of BPA in water were carried out in a single step. Under optimum conditions, the system provided a linear dynamic range of 0.1 to 100 μM with a limit of detection of 20 nM (S/N ≥3). A single in-tube microextractor had a good stability of more than 60 consecutive injections for 10.0 μM BPA with a relative standard deviation of less than 4%. Moreover, a good tube-to-tube reproducibility and precision were obtained. The system was applied to detect BPA in water samples from six brands of baby bottles and the results showed good agreement with those obtained from the conventional GC-MS method. Acceptable percentage recoveries from the spiked water samples were obtained, ranging from 83-102% for this new method compared with 73-107% for the GC-MS standard method. This new in-tube CPANI microextractor provided an excellent extraction efficiency and a good reproducibility. In addition, it can also be easily applied for the analysis of other polar organic compounds contaminated in water sample.

Determination of selected phthalate esters compounds in water and sediments by capillary gas chromatography and flame ionization detector

The presence of phthalate esters (PAEs) in the environment is not desirable and therefore, needs to be monitored. This study reports the first data on the concentration levels of PAEs in water and sediments of the Jukskei River catchment area, South Africa. The study was conducted during the summer and winter seasons of 2005. Liquid-liquid extraction (LLE) and Soxhlet extraction (SE) methods were optimized, evaluated and used to determine PAEs of interest in water (unfiltered and filtered) and sediments samples, respectively. Mean percentage recoveries in spiked doubly distilled water ranged from 100 ± 5.32 dimethyl phthalate (DMP) - 122 ± 0.46 di-2-ethylhexyl phthalate (DEHP) and 91.6 ± 1.93 diethyl phthalate (DEP) - 117 ± 4.80 dibutyl phthalate (DBP) in sediments. The concentration levels of PAEs studied in unfiltered environmental water samples were in the range of 0.04(± 0.00) (DMP) - 9.76(± 00.1) ng mL(-1)(DEHP) for PAEs and from 0.09 (± 0.01) (DMP) - 4.38 (± 0.06) ng mL(-1)(DEHP) for filtered environmental water samples. Concentration levels obtained in sediments were from 0.05 (0.00) (DMP) - 4910 (0.36) ng/gdw (DEHP). PAEs adsorbed on the sample bottle gave concentration levels of up to 0.10 (± 0.03) ng mL(-1)for some samples and no analyte was detected (ND) in some cases Generally, concentrations obtained were below the water quality guideline values of United States Environmental Protection Agency (USEPA).

Synthesis, Structural and Gas Sensing Properties of Nano-Branched Coaxial Polyaniline Fibers by Electrospinning

Polyaniline (PANI) is a promising functional polymer in the field of toxic gas detection. In this paper, nano-branched coaxial PANI fibers were grown on electrospun poly(methyl methacrylate) (PMMA) nanofibers by an in situ chemical oxidative polymerization method. The resultant PANI/PMMA fibers were characterized by scanning electronic microscopy and Raman spectrum analysis. The conductivity of an individual coaxial PANI/PMMA fiber is about 2.123 S/cm and that of the conducting PANI coating layer is about 21.8 S/cm. The ammonia sensing properties of the samples were tested by means of impedance analysis. The nano-branched PANI fibers can response significantly to low concentration of ammonia due to large specific surface area, and the sensitivity shows good linear relationship to the ammonia concentration of ppm level. These results indicate that nano-branched coaxial PANI fibers are promising candidate for detection of toxic ammonia gas.

Determination of 16 polycyclic aromatic hydrocarbons in water using fluorinated polyaniline-based solid-phase microextraction coupled with gas chromatography

The study on the performance of a fluorinated polyaniline (PANI) as a fiber coating for solid-phase microextraction (SPME) had been reported and 16 polycyclic aromatic hydrocarbons (PAHs) were selected to evaluate the performance of this fiber. Various parameters including sample volume, extraction temperature, time of desorption and extraction, pH and ionic strength were investigated intensively. A direct comparison between PANI-SPME fiber and commercial fiber was conducted. The results showed that the PANI-SPME coating had high affinity towards target compounds and the proposed method was successfully applied for the detection of real samples: rainfall and Taihu Lake water collected from Southern China. The whole PANI-SPME-GC method offers acceptable accuracy, precision and sensitivity and low detection limits, which is applicable to monitor trace levels of PAHs in real water bodies.