Liquid-phase microextraction with porous hollow fibers, a miniaturized and highly flexible format for liquid–liquid extraction

Application of capillary electrophoresis with capacitively contactless conductivity detection for biomedical analysis

The coupling of capillary electrophoresis (CE) with capacitively coupled contactless conductivity detection (C4 D) has become convenient analytical method for determination of small molecules that do not possess chromogenic or fluorogenic group. The implementations of CE with C4 D in the determination of inorganic and organic ions and amino acids in biomedical field are demonstrated. Attention on background electrolyte composition, sample treatment procedures, and the utilize of multi-detection systems are described. A number of tables summarizing highly developed CE-C4 D methods and the figures of merit attained are involved. Lastly, concluding remarks and perspectives are argued.

Comparison of the applicability of electromembrane extraction and liquid-phase microextraction for extraction of non-polar basic drugs from different biological samples: Using clozapine as the model analyte

Understanding and comparing the applicability of electromembrane extraction (EME) and liquid-phase microextraction (LPME) is crucial for selecting an appropriate microextraction approach. In this work, EME and LPME based on supported liquid membranes were compared using biological samples, including whole blood, urine, saliva, and liver tissue. After optimization, efficient EME and LPME of clozapine from four biological samples were achieved. EME provided higher recovery and faster mass transfer for blood and liver tissue than LPME. These advantages were attributed to the electric field disrupting clozapine binding to interfering substances. For urine and saliva, EME demonstrated similar recoveries while achieving faster mass transfer rates. Finally, efficient EME and LPME were validated and evaluated combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS). The coefficient of determination of all methods was greater than 0.999, and all methods showed acceptable reproducibility (≤14%), accuracy (90%-110%), and matrix effect (85%-112%). For liver and blood with high viscosity and complex matrices, EME-LC-MS/MS provided better sensitivity than LPME-LC-MS/MS. The above results indicated that both EME and LPME could be used to isolate non-polar basic drugs from different biological samples, although EME demonstrated higher recovery rates for liver tissue and blood.

Head Space Single Drop Micro Extraction Gas Chromatography Flame Ionization Detection (HS-SDME-GC-FID) Method for the Analysis of Common Fatty Acids

Objectives

Post-marketing/surveillance studies show that most of the many vegetable oils that are sold with health-promoting claims or statements with high nutritional values and are beneficial against diseases are off-limits of related monographs/criteria. Defining the oil with a fast, cheap, and efficient analytical method is needed to express fatty acids in any herbal product to authenticate, trace, specify, and classify the content.The majority of the after marketing/surveillance studies shows that most of the many vegetable oils that are sold with health-promoting claims or statements with high nutritional values and are beneficial against diseases are off-limits of related monographs/criteria. Defining the oil with fast, cheap and efficient analytical method to express fatty acids in any herbal product, to authenticate, trace, specify and classify the content is needed.

Materials and Methods

Here, we define a new simple tool with a headspace single drop microextraction (HS-SDME) method coupled with a gas chromatography-flame ionization detector (GC-FID) for the analysis of common fatty acids (FAs) in oils. Linolenic acid, γ-linolenic acid, and linoleic acid in olive oil, thyme oil, and fish oil were determined. Derivatization was performed with 0.2 mL of 2 mol/L KOH in methanol to transfer the FAs of oils into their methyl esters (FAMEs). Then, FAMEs were extracted using a head space single drop, which is 2.0 μL of sodium dodecyl sulfate:1-butanol (1:3, v/v) mixture.

Results

The most suitable extraction condition was that 360 μL of the FAMEs, 2.0 mL vial, 0.07 g NaCl as a salting-out effect, 45 °C extraction temperature, and 35 min extraction time. The precision of the method was below 12%, with accuracy validated by the GC-FID reference method.The most suitable extraction condition was that 360 μL of the fatty acid methyl esters (FAMEs), 2.0 mL vial, 0.07 g NaCl as a salting-out effect, 45 °C extraction temperature, and 35 min extraction time. The precision of the method was below 12% with an accuracy validated by the GC-FID reference method.

Conclusion

The HS-SDME can be used effectively for extracting FAs from oils for improved analysis of other FAs. The method is of direct importance and relevance for the herbal, pharmaceutical, and cosmetics industries.The HS-SDME can be used for effectively for extracting fatty acids from oils for improved analysis of other fatty acids while the method is direct importance and relevance for herbal, pharmaceutical, cosmetics industry.

Research progress in human biological monitoring of aromatic hydrocarbon with emphasis on the analytical technology of biomarkers

Aromatic hydrocarbons are unsaturated compounds containing carbon and hydrogen that form single aromatic ring, or double, triple, or multiple fused rings. This review focuses on the research progress of aromatic hydrocarbons represented by polycyclic aromatic hydrocarbons (including halogenated polycyclic aromatic hydrocarbons), benzene and its derivatives including toluene, ethylbenzene, xylenes (o-, m- and p-), styrene, nitrobenzene, and aniline. Due to the toxicity, widespread coexistence, and persistence of aromatic hydrocarbons in the environment, accurate assessment of exposure to aromatic hydrocarbons is essential to protect human health. The effects of aromatic hydrocarbons on human health are mainly derived from three aspects: different routes of exposure, the duration and relative toxicity of aromatic hydrocarbons, and the concentration of aromatic hydrocarbons which should be below the biological exposure limit. Therefore, this review discusses the primary exposure routes, toxic effects on humans, and key populations, in particular. This review briefly summarizes the different biomarker indicators of main aromatic hydrocarbons in urine, since most aromatic hydrocarbon metabolites are excreted via urine, which is more feasible, convenient, and non-invasive. In this review, the pretreatment and analytical techniques are compiled systematically for the qualitative and quantitative assessments of aromatic hydrocarbons metabolites such as gas chromatography and high-performance liquid chromatography with multiple detectors. This review aims to identify and monitor the co-exposure of aromatic hydrocarbons that provides a basis for the formulation of corresponding health risk control measures and guide the adjustment of the exposure dose of pollutants to the population.

Electrochemical sensor based on a ZnO-doped graphitized carbon for the electrocatalytic detection of the antibiotic hydroxychloroquine. Application: tap water and human urine

Abstract

In December 2019, the world experienced a new coronavirus, SARS-CoV-2, causing coronavirus disease 2019 originating from Wuhan.The virus has crossed national borders and now affects more than 200 countries and territories. Hydroxychloroquine has been considered as a drug capable of treating COVID-19. The objective of this work is to establish a simple platform for electrocatalytic detection of hydroxychloroquine in human urine samples and pharmaceutical samples (tablets) using a ZnO@CPE sensor constructed by simple and inexpensive hydrothermal methods using a square wave voltammetry method. The best results are obtained in a PBS electrolyte with irreversible behavior of the hydroxychloroquine complement and controlled by diffusion coupled with absorption phenomena. The ZnO@CPE shifts the oxidation potential of hydroxychloroquine with the formation of a single very intense peak at the position of Epa = 0.5 V/(vs Ag/AgCl) with a shift is ΔEp = 0.1 V(vs Ag/AgCl) compared to the unmodified electrode. The obtained ZnO@CPE hybrid nanocomposite was characterized by different techniques and showed excellent electrocatalytic activity and higher active surface area compared to the bare carbon paste electrode. Under the optimized experimental conditions, the ZnO@CPE sensor showed good analytical performance for the determination of trace amounts of hydroxychloroquine, a wide linearity range from 10^-3 M to 0.8 × 10^-6 M with a very low detection limit in the range of 1.33 × 10^-7 M, satisfactory selectivity, acceptable repeatability and reproducibility. The calculated recovery and coefficient of variation for the two samples analyzed are very satisfactory, ranging from 97.6 to 102% and 1.2 to 2.3% respectively. The proposed applied method and the fabricated sensor offer the possibility to analyze traces of hydroxychloroquine in real human urine and water samples.

Graphical abstract

Strategy for the electro-oxidation reaction of hydroxychloroquine on the electro-catalytic surface of the ZnO@Carbon graphite electrode and real-time detection of hydroxychloroquine.

Amphetamine, methamphetamine, and MDMA in hair samples from a rehabilitation facility: Validation and applicability of HF-LPME-GC-MS

INTRODUCTION

It is known that drug abuse jeopardizes economic and social development. Toxicological analyses can guide prevention and treatment strategies in rehabilitation facilities. The current greatest challenge is finding easily adaptable and less costly sensitive methods that meet the principles of green chemistry. Hair, as a biological matrix, has several advantages, and its ability to detect consumption for longer periods keeping the matrix stable and unaltered stands out. This manuscript addresses the use of a miniaturized technique in an alternative matrix, by making use of a reduced amount of solvents to quantify amphetamines, aiming to guide prevention and treatment strategies in rehabilitation facilities.

METHODS

A Hollow Fiber Liquid-phase Microextraction (HF-LPME) technique for extracting amphetamines from hair samples with Gas Chromatography-Mass Spectrometry (CG-MS) was validated, adapted, and applied to ten samples from patients of a rehabilitation facility.

RESULTS

The technique proved to be sensitive, accurate, precise, and not affected by interference from the biological matrix and the linear range for the analytes was 0.2 to 20 ng mg ^-1. The three analytes were quantified in the samples analyzed. It is worth stressing that the patients were young.

CONCLUSION

The HF-LPME-GC-MS technique complied with the principles of green chemistry, and proved to be a sensitive technique, adaptable to the routine of common laboratories. Validation in the analysis phase with authentic samples, thus, showed that it can be an important tool for preventing and controlling drug addiction.

Hollow Fibre-Supported Liquid Membrane for the Determination of Sulfonamide Residues in Egg Samples

In this study, a three-phase hollow fibre-supported liquid membrane (HF-SLM) technique incorporated with high-performance liquid chromatography (HPLC) coupled with diode array detection (DAD) was developed for the extraction, clean-up, and determination of fifteen sulfonamide residues in chicken egg samples. The residues were extracted from the 5 mL sample solution of pH 2.5 into a thin layer of organic phase (1-octanol with 10% TOPO) immobilised in hollow fibre pores and then back-extracted into approximately 6 μL of aqueous phase (pH 13) located in the lumen of the hollow fibre. After extraction, 6 μL of the acceptor phase was injected into an HPLC instrument for subsequent analysis. Under optimum conditions, the limit of detection (LOD) and limit of quantification (LOQ) values ranged from 0.8–7.9 μg·kg−1 and from 2.4–21.0 μg·kg−1, respectively, linearity in the range of 5 1 000 μg·kg−1, and intra- and inter-day precision (%RSD) values at three concentration levels (50, 100, and 500 μg·L−1) ranged from 6.2–15.7%, 7.3–15.0%, and 7.3–14.6%; and 6.4–17.4%, 4.3–16.2%, and 8.3–16.5%, respectively, were obtained. The accuracy of the method, expressed as percentage recovery, was in the range of 71.0–98.7%, with corresponding %RSD (n = 6) values ranging from 1.9–9.9% being obtained. The developed method provided enrichment factors in the range of 17.1 to 541.4. The applicability of the proposed method was also evaluated by analysing egg samples, which were randomly collected from local supermarkets located in Gauteng Province, South Africa. The results obtained revealed that the developed method has the potential to be used as an alternative method for the determination of sulfonamide residues in egg and related complex samples.

Multiclass determination of endocrine disruptors in urine by hollow fiber microporous membrane and liquid chromatography

A simple and rapid methodology was developed using hollow fiber membrane microporous and a 96-well plate system for a high throughput multiclass determination of endocrine disruptors in human urine (diclofenac, diazepam, carbamazepine, ibuprofen, naproxen, carbofuran, methyl parathion, 17-α-ethynyl estradiol, bisphenol A and benzophenone). The quantification and detection of the chemicals were carried out by an HPLC-diode array detector. The fixed conditions for carrying out the method optimization were 1.5 mL of sample and 300 μL of solvent desorption. Multivariate and univariate models were applied to optimize the parameters of the method, achieving the following conditions: 20% diluted urine, 1-octanol of extraction solvent impregnated in the microporous membrane, 70 min extraction in pH 3.0 and 30 min with a mixture of 75% methanol and 25% acetonitrile (v/v) for the desorption. The R² were ≤ 0.9973 for ibuprofen. The LOD ranged from 3.3 to 16.7 ng mL^-1 and the LOQ from 10 to 50 ng mL^-1. Relative recoveries ranged from 71% to 126%. The repeatability (n = 3) ranged from 0.22% to 12.01%, and the intermediate precision (n = 9) ranged from 0.13% to 17.76%. The method presents a good alternative for the determination of different classes of compounds in human urine.

Successive liquid-phase microextraction of acidic and basic analytes

Practical biological and environmental samples always contain both acidic and basic substances, and the samples are always precious. Thus, separation of analytes with different nature from the same sample was of great significance. Successive liquid phase microextraction (sLPME) of acidic and basic analytes under optimal extraction conditions was therefore proposed for the first time. The concept of sLPME was proved by using three acidic analytes (naproxen, flurbiprofen and diclofenac) and three basic analytes (haloperidol, fluoxetine and sertraline) as model analytes, and using polypropylene glycol with an average molecular weight of 4000 (PPG4000) as SLM. The recoveries of all target analytes by sLPME were similar to that by individual LPME due to good affinity of PPG4000 to both acidic and basic analytes. Under optimal extraction conditions, the recoveries for all analytes by sLPME from urine samples were in the range of 62%-95%. Moreover, combined with LC-MS/MS, such sLPME approach was also evaluated with urine samples. The matrix effect of sLPME-LC-MS/MS at different levels for all analytes ranged from -14.1%-13.2%. The linear ranges with R² > 0.996 were 5-1000 ng mL^-1 for basic analytes, and 20-1000 ng mL^-1 for acidic analytes except diclofenac (1-1000 ng mL^-1). The repeatability and accuracy at four levels were in the range of 3%-10% and 86%-120%, respectively. The limit of detection (LOD, S/N = 3) and limit of quantification (LOQ, S/N = 10) were found to be 0.07-0.49 ng mL^-1 and 0.25-1.63 ng mL^-1, respectively. Finally, the strategy for constructing a sLPME system was further confirmed with urine, plasma and saliva using another two versatile SLM solvents possessing high affinity to both acidic and basic analytes. Successive LPME enabled separation of acidic and basic analytes from the same sample under optimum extraction conditions for all target analytes. Thus, we believe that the sLPME system will become a potent platform for forensic toxicology analysis, food science, environmental analysis and epidemiology study.

Parallel artificial liquid membrane extraction of organophosphorus nerve agent degradation products from environmental samples

An emerging miniaturized high-throughput microextraction technique named Parallel artificial liquid membrane extraction (PALME) was, for the first time, investigated for the extraction of polar alkyl methylphosphonic acids (AMPAs) that are the degradation products of organophosphorus nerve agents. The effect of the key-parameters of the extraction method (nature of the membrane, of the extraction solvent, of the pH values of both donor and acceptor phases, agitation speed, extraction time, temperature and ionic strength) on the extraction recoveries was studied in spiked pure water samples. This led to extraction recoveries in the range of 25-102% for the 5 targeted analytes from water with enrichment factors in the range of 4.50-42.75. The developed PALME-LC-MS/MS method was first evaluated with spiked pure water. LOQs (S/N ≥ 10) were in the range of 0.009-1.141 ng mL^-1, linearity above 0.9973 for all the AMPAs and with RSD values below 11%. This method was then applied on simulated waste water, river water and aqueous soil extracts. The achieved LOQs were in the range of 0.011-1.210, 0.013-1.196 and 0.016-6.810 ng mL^-1, respectively. A detailed comparison of the performances of this PALME method with those of a previously developed hollow fiber liquid-phase microextraction methods already applied to AMPAs was done thus allowing to demonstrate the easy transfer of methods from HF-LPME to PALME. Moreover, the high-throughput potential of PALME was revealed since 192 samples were processed in parallel during 120 min (37.5 s/sample).

Sensitive determination of illicit drugs in wastewater using enrichment bag-based liquid-phase microextraction and liquid-chromatography tandem mass spectrometry

To concentrate trace level of analytes in complex wastewater, sample preparation is necessary prior to instrumental analysis. In this work, an enrichment bag-based liquid-phase microextraction (EB-LPME) system was therefore proposed for the first time to isolate and enrich the illicit drugs (amphetamine, methamphetamine, 3,4-methylenedioxymethamphetamine (MDMA), ketamine, codeine and fentanyl) from wastewater. Under the optimum EB-LPME conditions, the recoveries of the model illicit drugs were 40-93% with enrichment factors up to 93. The optimized EB-LPME was compared to hollow fiber-LPME (HF-LPME) in terms of the thickness of the supported liquid membrane (SLM), the effective SLM area, extraction recovery and mass transfer flux. Compared with HF-LPME, EB-LPME possesses larger effective SLM area, and provided higher extraction recovery. In addition, EB-LPME provided larger mass transfer flux than HF-LPME, which was mainly due to the differences in SLM thickness. Therefore, SLM thickness was identified as the main mass transfer flux-determining factor experimentally. The matrix effect of EB-LPME was evaluated using liquid chromatography-tandem mass spectrometry (LC-MS/MS), and excellent sample clean-up was confirmed. Subsequently, EB-LPME-LC-MS/MS was validated with satisfactory results, and the detection of limit of the proposed method was in the range of 0.3-8.7 ng/L. Finally, with standard addition method, EB-LPME-LC-MS/MS was successfully applied for the determination of the model drugs in a local hospital wastewater from Wuhan, China. This study clearly showed that EB-LPME displayed great potential as an efficient sample preparation method for isolation and enrichment of the drugs/pollutants from complex environmental samples for wastewater-based epidemiology in the near future.

Sample preparation and instrumental methods for illicit drugs in environmental and biological samples: A review

Detection of illicit drugs in the environmental samples has been challenged as the consumption increases globally. Current review examines the recent developments and applications of sample preparation techniques for illicit drugs in solid, liquid, and gas samples. For solid samples, traditional sample preparation methods such as liquid-phase extraction, solid-phase extraction, and the ones with external energy including microwave-assisted, ultrasonic-assisted, and pressurized liquid extraction were commonly used. The sample preparation methods mainly applied for liquid samples were microextraction techniques including solid-phase microextraction, microextraction by packed sorbent, dispersive solid-phase extraction, dispersive liquid-liquid microextraction, hollow fiber-based liquid-phase microextraction, and so on. Capillary microextraction of volatiles and airborne particulate sampling were primarily utilized to extract illicit drugs from gas samples. Besides, the paper introduced recently developed instrumental techniques applied to detect illicit drugs. Liquid chromatograph mass spectrometry and gas chromatograph mass spectrometry were the most widely used methods for illicit drugs samples. In addition, the development of ambient mass spectrometry techniques, such as desorption electrospray ionization mass spectrometry and paper spray mass spectrometry, created potential for rapid in-situ analysis.

Multi-residue analysis of pesticides in blood plasma using hollow fiber solvent bar microextraction and gas chromatography with a flame ionization detector

The challenges faced on pesticide extraction from biological samples are finding a method that allows a multi-residue extraction, pre-concentration, clean-up, and isolation of analytes in just one step. In this sense, the hollow fiber - liquid phase microextraction method (HF- LPME) in the "solvent bar" mode was used to optimize and validate a method for pesticide multi-residue analysis in blood plasma at trace levels, through gas chromatography coupled with a flame ionization detector (GC-FID). Hollow fiber solvent bar microextraction HF-SBME was carried out with octanol immobilized into the pores of hydrophobic polypropylene fiber and disposed within a matrix of blood plasma, spiked with a mixture of pesticides (monocrotophos, lindane, aldrin, methyl parathion, endosulfan, dieldrin, DDD, DDT, and endrin). The optimization parameters evaluated were: extraction temperature and time, stirring speed, and salt concentration. A principal component analysis was performed to visualize the analytes' behaviour based on their explained variance, and then, a Box-Behnken analysis was generated to identify the optimum parameters. According to the PCA, all pesticides showed similar responses to the extraction method and the response of dieldrin exhibit the lowest variance. Moreover, the stationary points selected from the Box-Behnken analysis were 25.5 °C for the extraction temperature, 870 rpm for stirring speed, 16 min for extraction time, and 8.3 % w/v of salt concentration. Moreover, the validation results proved that HF-SBME is an alternative technique for pesticide multi-residue extraction in blood plasma. The analytes were able to concentrate, reaching 46 fold enrichment. The solvent type, sample and solvent volume were narrowed down without changing the method's precision or accuracy. The relative standard deviation was under 10 %, and the recovery was between 55 % and 105 % for the different analytes excepting lindane, which had lower recovery (27 %). The detection limits were 0.02 until 0.13 μg mL^-1 for most of the pesticides used. Finally, HF-SBME is a good alternative for pesticide multi-residue extraction in complex matrices like plasma.

Composable microfluidic spinning platforms for facile production of biomimetic perfusable hydrogel microtubes

Microtissues with specific structures and integrated vessels play a key role in maintaining organ functions. To recapitulate the in vivo environment for tissue engineering and organ-on-a-chip purposes, it is essential to develop perfusable biomimetic microscaffolds. We developed facile all-aqueous microfluidic approaches for producing perfusable hydrogel microtubes with diverse biomimetic sizes and shapes. Here, we provide a detailed protocol describing the construction of the microtube spinning platforms, the assembly of microfluidic devices, and the fabrication and characterization of various perfusable hydrogel microtubes. The hydrogel microtubes can be continuously generated from microfluidic devices due to the crosslinking of alginate by calcium in the coaxial flows and collecting bath. Owing to the mild all-aqueous spinning process, cells can be loaded into the alginate prepolymer for microtube spinning, which enables the direct production of cell-laden hydrogel microtubes. By manipulating the fluid dynamics at the microscale, the composable microfluidic devices and platforms can be used for the facile generation of six types of biomimetic perfusable microtubes. The microfluidic platforms and devices can be set up within 3 h from commonly available and inexpensive materials. After 10-20 min required to adjust the platform and fluids, perfusable hydrogel microtubes can be generated continuously. We describe how to characterize the microtubes using scanning electron or confocal microscopy. As an example application, we describe how the microtubes can be used for the preparation of a vascular lumen and how to perform barrier permeability tests of the vascular lumen.

Modern microextraction techniques for natural products

Natural product analysis has gained wide attention in recent years, especially for herbal medicines, which contain complex ingredients and play a significant clinical role in the therapy of numerous diseases. The constituents of natural products are usually found at low concentrations, and the matrices are complex. Thus, the extraction of target compounds from natural products before analysis by analytical instruments is very significant for human health and its wide application. The commonly used traditional extraction methods are time-consuming, using large amounts of sample and organic solvents, as well as expensive and inefficient. Recently, microextraction techniques have been used for natural product extraction to overcome the disadvantages of conventional extraction methods. In this paper, the successful applications of and recent developments in microextraction techniques including solvent-based and sorbent-based microextraction methods, in natural product analysis in recent years, especially in the last 5 years, are reviewed for the first time. Their features, advantages, disadvantages, and future development trends are also discussed.

Review: Microextraction Technique Based New Trends in Food Analysis

Food chemistry is the study and classification of the quality and origin of foods. The identification of definite biomarkers and the determination of residue contaminants such as toxins, pesticides, metals, human and veterinary drugs, which are a very common source of food-borne diseases. The food analysis is continuously demanding the improvement of more robust, sensitive, highly efficient, and economically beneficial analytical approaches to promise the traceability, safety, and quality of foods in the acquiescence with the consumers and legislation demands. The traditional methods have been used at the starting of the 20th century based on wet chemical methods. Now it existing the powerful analytical techniques used in food analysis and safety. This development has led to substantial enhancements in the analytical accuracy, precision, sensitivity, selectivity, thereby mounting the applied range of food applications. In the present decade, microextraction (micro-scale extraction) pays more attention due to its futures such as low consumption of solvent and sample, throughput analysis easy to operate, greener, robotics, and miniaturization, different adsorbents have been used in the microextraction process with unique nature recognized with wide range applications.

Application of Hollow Fibre-Liquid Phase Microextraction Technique for Isolation and Pre-Concentration of Pharmaceuticals in Water

In this article, a comprehensive review of applications of the hollow fibre-liquid phase microextraction (HF-LPME) for the isolation and pre-concentration of pharmaceuticals in water samples is presented. HF-LPME is simple, affordable, selective, and sensitive with high enrichment factors of up to 27,000-fold reported for pharmaceutical analysis. Both configurations (two- and three-phase extraction systems) of HF-LPME have been applied in the extraction of pharmaceuticals from water, with the three-phase system being more prominent. When compared to most common sample preparation techniques such as solid phase extraction, HF-LPME is a greener analytical chemistry process due to reduced solvent consumption, miniaturization, and the ability to automate. However, the automation comes at an added cost related to instrumental set-up, but a reduced cost is associated with lower reagent consumption as well as shortened overall workload and time. Currently, many researchers are investigating ionic liquids and deep eutectic solvents as environmentally friendly chemicals that could lead to full classification of HF-LPME as a green analytical procedure.

Accurate and simple determination of oxcarbazepine in human plasma and urine samples using switchable-hydrophilicity solvent in GC-MS

This work presents a sensitive and rapid analytical method for the determination of oxcarbazepine in human plasma and urine samples. A vortex-assisted switchable hydrophilicity solvent-based liquid phase microextraction (VA-SHS-LPME) was used to preconcentrate oxcarbazepine from the samples before the determination by gas chromatography mass spectrometry. The switchable hydrophilicity solvent was synthesized by protonating N,N-dimethylbenzylamine with carbon dioxide to make it totally miscible with an equivalent volume of water. Parameters of the VA-SHS-LPME method including volume of switchable hydrophilicity solvent, concentration/volume of sodium hydroxide and vortex period were systematically optimized. Under the optimum conditions, good linearity ranging from 27.03 to 353.47 μg/kg was obtained for the analyte. Limit of detection and quantitation values were found to be 6.2 and 21 μg/kg (mass base), respectively. The relative standard deviation was calculated as 6.9% for six replicate measurements of the lowest concentration of the calibration plot. Satisfactory recovery results were calculated in the range of 97-100% for human plasma and urine samples spiked at five different concentrations.

Optimized Vortex-Assisted Dispersive Liquid–Liquid Microextraction Coupled with Spectrofluorimetry for Determination of Aspirin in Human Urine: Response Surface Methodology

Background:

A Vortex-assisted dispersive liquid-liquid microextraction (VA-DLLME) method is presented for the determination of aspirin (acetylsalicylic acid) in human urine by spectrofluorimetry.

Objective:

To determine trace levels of aspirin in biologic samples by using green and low-cost method development.

Methods:

For the microextraction procedure, chloroform and acetonitrile were used as extraction and disperser solvent, respectively. The factors affecting the efficiency of extraction such as volume of chloroform, volumes of acetonitrile, ionic strength, sample pH, centrifuging time, and extraction time were investigated. Then significant variables were optimized by the response surface method using the Box- Behnken design.

Results:

Under the optimum extraction conditions, a linear calibration curve in the range of 0.1 to 130 ng mL-1 with a correlation coefficient of R2 = 0.998 was obtained. The limits of detection (LOD) and limits of quantification (LOQ) were 0.031 and 0.103 ng mL-1, respectively. The relative standard deviations (RSD) were less than 4%.

Conclusion:

Enrichment factor and recoveries were achieved for the extraction of aspirin in human urine. This method gives a rapid, simple, sensitive and environmentally friendly for the measurement of trace amount aspirin.

Hollow-fibre liquid-phase microextraction and gas chromatography-mass spectrometric determination of amphetamines in whole blood

Here, we present a fully validated method using a hollow-fibre liquid-phase microextraction technique for the determination by gas chromatography-mass spectrometry (GC-MS) of amphetamine (AMP), methamphetamine (MET), fenproporex (FEN), 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA) and 3,4-methylenedioxyethylamphetamine (MDEA) in whole blood. The validation parameters presented successful values within those recommended by the Scientific Working Group for Forensic Toxicology (SWGTox) in the Standard Practices for Method Validation in Forensic Toxicology. The limits of detection ranged from 1 to 3 ng/mL, and the limits of quantification ranged from 2 to 5 ng/mL. The determination coefficients (r²) ranged from 0.990 to 0.997, and the method presented good intraday and interday accuracy (from 90.4% to 97.2%) and satisfactory recovery (from 68% to 110%). No carryover was observed. The heteroscedasticity was tested, and only AMP presented homoscedasticity. Weighting factors were applied to correct the linearity of MET (1/x²), MDA (1/x), FEN (1/x^1/2), MDMA (1/x²) and MDEA (1/y). Dilution integrity was tested at ratios of 1:2, 1:5 and 1:10, and all maintained intraday precision (from 94.9% to 99.3%) and interday precision (from 89.4% to 94.9%). The validated method was applied to six real whole blood samples from individuals suspected of consuming ecstasy, and MDMA, MDA and amphetamine were successfully identified and quantified.

Robotic-assisted dynamic large drop microextraction

By proper design of an innovative extraction device, a lab-made multipurpose autosampler was exploited in the automated performance of the dynamic large drops based microextraction. The pluses of this new analytical strategy were demonstrated in the determination of sulfonamides and fluoroquinolones in surface water samples, by direct immersion single drop microextraction (SDME) and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) analysis. Operational autosampler features and critical experimental factors influencing SDME, including the extraction mode (static or dynamic), extraction, stirring rate, salt addition, drop size, number of cycles and drop exposition time, were comprehensively investigated using both univariate and multivariate optimization. The lab-made autosampler allowed to performance challenging dynamic and static large drop based SDMEs in an automated and effortless way and with minimal requirements of hardware and software. Large stable drops provided high surface area, enhancing the phase ratio and in consequence increasing the analytes uptake. The best extraction efficiencies were obtained as a result of the synergic interaction between the use of large drops and the automated dynamic mode of extraction. The developed method proved to be a reliable, sensitive, and robust analytical tool, with intraday RSDs ranging between 4.0 and 7.6% (n = 6), and interday RSDs between 4.8 and 9.3% (n = 6), and, LOD and LOQ in the range of 15-50 and 35-100 ng L^-1, respectively.

Radionuclide generator-based production of therapeutic 177Lu from its long-lived isomer 177mLu

Background

In this work, a lutetium-177 (¹⁷⁷Lu) production method based on the separation of nuclear isomers, ^177mLu & ¹⁷⁷Lu, is reported. The ^177mLu-¹⁷⁷Lu separation is performed by combining the use of DOTA & DOTA-labelled peptide (DOTATATE) and liquid-liquid extraction.

Methods

The ^177mLu cations were complexed with DOTA & DOTATATE and kept at 77 K for periods of time to allow ¹⁷⁷Lu production. The freed ¹⁷⁷Lu ions produced via internal conversion of ^177mLu were then extracted in dihexyl ether using 0.01 M di-(2-ethylhexyl) phosphoric acid (DEHPA) at room temperature. The liquid-liquid extractions were performed periodically for a period up to 35 days.

Results

A maximum ¹⁷⁷Lu/^177mLu activity ratio of 3500 ± 500 was achieved with [^177mLu]Lu-DOTA complex, in comparison to ¹⁷⁷Lu/^177mLu activity ratios of 1086 ± 40 realized using [^177mLu]Lu-DOTATATE complex. The ¹⁷⁷Lu-^177mLu separation was found to be affected by the molar ratio of lutetium and DOTA. A ¹⁷⁷Lu/^177mLu activity ratio up to 3500 ± 500 was achieved with excess DOTA in comparison to ¹⁷⁷Lu/^177mLu activity ratio 1500 ± 600 obtained when lutetium and DOTA were present in molar ratio of 1:1. Further, the ¹⁷⁷Lu ion extraction efficiency, decreases from 95 ± 4% to 58 ± 2% in the presence of excess DOTA.

Conclusion

The reported method resulted in a ¹⁷⁷Lu/ ^177mLu activity ratio up to 3500 after the separation. This ratio is close to the lower end of ¹⁷⁷Lu/^177mLu activity ratios, attained currently during the direct route ¹⁷⁷Lu production for clinical applications (i.e. 4000–10,000). This study forms the basis for further extending the liquid-liquid extraction based ^177mLu-¹⁷⁷Lu separation in order to lead to a commercial ^177mLu/¹⁷⁷Lu radionuclide generator.

Electronic supplementary material

The online version of this article (10.1186/s41181-019-0064-5) contains supplementary material, which is available to authorized users.

Recent advances in microextraction procedures for determination of amphetamines in biological samples

Amphetamine and its related derivatives have stimulant and hallucinogenic properties. Illegal use of these drugs is an increasing global problem resulting in significant public health and legal problems. Deaths have been reported after intake of these drugs due to overdose. It is important to determine the type and concentration of illicit drugs in biological samples. These compounds are found in complex matrices at low concentration levels. The microextraction techniques are dominant sample preparation procedure and they are widely accepted as the most labor-intensive part of the bioanalytical process. For this purpose, a survey of recent published advances in microextraction procedures for quantification of amphetamines in biological samples found in the different databases from 2008 to date will be conducted.