Biological activity of mixed chelate copper(II) complexes, with substituted diimine and tridentate Schiff bases (NNO) and their hydrogenated derivatives as secondary ligands: Casiopeína's fourth generation

We synthesize and characterize nine copper(II) compounds. Four with general formula [Cu(NNO)(NO₃)] and five mixed chelates [Cu(NNO)(N-N)]⁺, where NNO corresponds to asymmetric salen ligands (E)-2-((2-(methylamino)ethylimino)methyl)phenolate (L1) and (E)-3-((2-(methylamino)ethylimino)methyl)naphthalenolate (LN1); and their hydrogenated derivatives 2-((2-(methylamino)ethylamino)methyl)phenolate (LH1) and 3-((2-(methylamino)ethylamino)methyl)naphthalenolate (LNH1); and N-N correspond to 4,4'-dimethyl-2,2'-bipiridyne(dmbpy) or 1,10-phenanthroline (phen). Using EPR, the geometries of the compounds in solution in DMSO were assigned, [Cu(LN1)(NO₃)] and [Cu(LNH1)(NO₃)] a square-planar, [Cu(L1)(NO₃)], [Cu(LH1)(NO₃)], [Cu(L1)(dmby)]⁺ and [Cu(LH1)(dmby)]⁺ a square-based pyramid; and [Cu(LN1)(dmby)]⁺, [Cu(LNH1)(dmby)]⁺ and [Cu(L1)(phen)]⁺ and elongated octahedral. By X-ray it was observed that [Cu(L1)(dmby)]⁺ and. [Cu(LN1)(dmby)]⁺ presented a square-based pyramidal, and [Cu(LN1)(NO₃)]⁺ a square-planar geometry. The electrochemical study showed that copper reduction process is a quasi-reversible system, where the complexes with hydrogenated ligands were less oxidizing. The cytotoxicity of the complexes was tested by MTT assay, all the compounds showed biological activity in HeLa cell line, the mixed compounds were the more active ones. Naphthalene moiety, imine hydrogenation and aromatic diimine coordination, increased biological activity. A structure-activity relationships were found: Log(IC₅₀) =  - 1.01(E_pc) - 0.35(Conjugated Rings) + 0.87, for Schiff base complexes and Log(IC₅₀) = 0.078(E_pc) - 0.32(Conjugated Rings) + 1.94, for hydrogenated complexes; the less oxidizing species with a great number of conjugated rings presented the best biological activity. Complexes-DNA binding constants were obtained by uv-vis studies using CT-DNA, the results suggested that the complexes can interact through the grooves, except the phenanthroline mixed complex that intercalate with DNA. Gel electrophoresis study with pBR 322 showed that compounds can produce changes in the form of DNA and some complexes can cleave DNA in the presence of H₂O₂.

Electrochemical sensor based on a ZnO-doped graphitized carbon for the electrocatalytic detection of the antibiotic hydroxychloroquine. Application: tap water and human urine

Abstract

In December 2019, the world experienced a new coronavirus, SARS-CoV-2, causing coronavirus disease 2019 originating from Wuhan.The virus has crossed national borders and now affects more than 200 countries and territories. Hydroxychloroquine has been considered as a drug capable of treating COVID-19. The objective of this work is to establish a simple platform for electrocatalytic detection of hydroxychloroquine in human urine samples and pharmaceutical samples (tablets) using a ZnO@CPE sensor constructed by simple and inexpensive hydrothermal methods using a square wave voltammetry method. The best results are obtained in a PBS electrolyte with irreversible behavior of the hydroxychloroquine complement and controlled by diffusion coupled with absorption phenomena. The ZnO@CPE shifts the oxidation potential of hydroxychloroquine with the formation of a single very intense peak at the position of Epa = 0.5 V/(vs Ag/AgCl) with a shift is ΔEp = 0.1 V(vs Ag/AgCl) compared to the unmodified electrode. The obtained ZnO@CPE hybrid nanocomposite was characterized by different techniques and showed excellent electrocatalytic activity and higher active surface area compared to the bare carbon paste electrode. Under the optimized experimental conditions, the ZnO@CPE sensor showed good analytical performance for the determination of trace amounts of hydroxychloroquine, a wide linearity range from 10^-3 M to 0.8 × 10^-6 M with a very low detection limit in the range of 1.33 × 10^-7 M, satisfactory selectivity, acceptable repeatability and reproducibility. The calculated recovery and coefficient of variation for the two samples analyzed are very satisfactory, ranging from 97.6 to 102% and 1.2 to 2.3% respectively. The proposed applied method and the fabricated sensor offer the possibility to analyze traces of hydroxychloroquine in real human urine and water samples.

Graphical abstract

Strategy for the electro-oxidation reaction of hydroxychloroquine on the electro-catalytic surface of the ZnO@Carbon graphite electrode and real-time detection of hydroxychloroquine.

Green-engineered synthesis of Bi2Zr2O7 NPs: excellent performance on electrochemical sensor and sunlight-driven photocatalytic studies

In this rapid growing eco-friendly research world, synthesis of non-toxic, highly effective photocatalyst for potential applications is necessary. Herein, a strong ability Bi2Zr2O7 nanoparticle (BZO NP) with pyrochlore structure was fabricated by solution combustion synthesis using green (Mentha spicata) and chemical (Glycine) fuels. The X-ray diffraction analysis confirms the formation of pure phase for synthesized BZO NP using pudina extract (BZOP NP) compared to BZO NP using Glycine fuel (BZOG NP). The lower energy band gap of synthesized BZOP NP was observed than BZOG NP and its values were found to be 2.26 and 2.49 eV measured by UV-visible absorbance spectral technique. The morphological analysis of pores and voids formation as examined by scanning electron microscopy (SEM) technique. The synthesized BZOP NP shows excellent photocatalytic activity for degradation of three different dyes under sunlight irradiation for about 150 min with 97.9% for Rose Bengal (RB) dye with lower charge transfer resistance (Rct) value. For the very first time, the synthesized NPs can be utilized as supercapacitor with good specific capacitance (SPCcv) value of 14.3 F/g and SPCGD (12.5 F/g) for BZOP compared to BZOG indicating pseudocapacitance nature. The synthesized nanoparticles (NPs) can sense lead nitrate and dextrose at concentration 1-5 mM in the potential range of - 1.0 to + 1.0 V. Accordingly, the reduction potential peak at - 0.25 V and oxidation potential peak found at - 0.82 V confirms the presence of lead content and presence of additional potential peaks at - 0.37 V and - 0.71 V for detection of dextrose biochemical. Recyclability experiment showed the retainment of photocatalytic activity up to five cycles indicating the photostability.

Electrochemical quantification of atrazine-fulvic acid and removal through bismuth tungstate photocatalytic hybrid membranes

Herbicides such as atrazine and humus substances such as fulvic acid are widely used in agricultural sector. They can be traced in surface and groundwater around the agriculture field at concentrations beyond the approved limit due to their mobility and persistence. Bismuth-based photocatalysts activated by visible light are potential materials for removing various organic pollutants from water bodies. These photocatalysts can also be suitable candidates for developing a hybrid membrane with anti-fouling properties. In this study, Bi2WO6 nanoparticles were synthesized via the hydrothermal method and integrated into the cellulose acetate (CA), polyetherimide (PEI), polysulfone (PSF) and polyvinylidene fluoride (PVDF) polymers via physical blending approach. The hybrid membranes were then characterized by FTIR, XPS and FESEM to confirm the chemical bonding, chemical composition and surface morphology of Bi2WO6. Thus, the pure water flux of CA (35.6 L m-2 h-1), PEI (46.56 L m-2 h-1), PSF (6.84 L m-2 h-1), and PVDF (68.47 L m-2 h-1) hybrid membranes has significantly enhanced than the pristine CA, PEI, PSF and PVDF membranes. The significant rejection of atrazine-fulvic acid was observed with hybrid membranes in the order of CA (84.1%) > PVDF (72.7%) > PEI (47.8%) > PSF (37.2%), and these membranes have shown an excellent flux recovery ratio than pristine membranes. Further, electrochemical quantification studies were performed to analyze the removal efficiency of atrazine-fulvic acid from water. In this present work, GO-modified SPE was employed for electrochemical sensing studies. The resultant CA hybrid membrane achieved removal efficiency of 84.08% for atrazine. It was observed that the Bi2WO6 established strong bonding with CA, and PVDF membranes, thus showing a significant removal efficiency and FRR than other hybrid and pristine membranes.

Development of conducting cellulose paper for electrochemical sensing of procalcitonin

An electrochemical paper-based sensor was developed for the detection of bacterial infection (BI)-specific biomarker procalcitonin (PCT). Reduced graphene oxide-gold nanoparticles (rGO-AuNP) and poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) were synthesized and were fabricated to a disposable, portable, and inexpensive cellulose fiber paper (CFP) substrate. rGO-AuNP-PEDOT:PSS nanocomposite-modified conductive paper-based biosensing platform was efficaciously fabricated by a constant and simple coating procedure. rGO-AuNP-PEDOT:PSS nanocomposite-modified conductive paper electrode was found to provide a sensitive and conductive substrate for PCT detection. The presence of rGO-AuNP-PEDOT:PSS nanocomposite on CFP substate was investigated by Fourier transform infrared spectrometry, field emission scanning electron microscopy, ultraviolet-visible spectroscopy, and X-ray diffraction studies. The electrochemical behavior of rGO-AuNP-PEDOT:PSS @CFP surface was studied with impedance spectroscopy, cyclic voltammetry, and chronoamperometry techniques. This low-cost paper-based biosensor has a linear range for PCT of 1 × 10³ to 6 × 10⁷ fg mL^-1. This developed sensor exhibited good reproducibility with a relative standard deviation (RSD) of about 3.7%. The proposed CFP-based biosensor has been proven as an accelerated simple point-of-care (POC) exploratory approach for early PCT diagnosis in inadequate areas with limited production facilities, computational techniques, and highly skilled experts.

Bacillus megaterium-induced biocorrosion on mild steel and the effect of Artemisia pallens methanolic extract as a natural corrosion inhibitor

Methanolic extract of Artemisia pallens (MEAP) (Asteraceae) was explored as greenbiocorrosion inhibitor for mild steel 1010 in 1.5% sodium chloride environment. Bacillus megaterium SKR7 induces the development of biofilm on the metal surface and forms the pitting corrosion. MEAP was showed (25 ppm) optimum inhibition effect of biocorrosion and further corrosion rate was highly reduced (0.3335 mm/year) than the control system (0.009 mm/year). The electrochemical study has supported the results with a higher value of total resistance (34 Ω cm²) when compared to control systems. It reveals the formation of a protective layer on the metal surface and reduces the adsorption of biofilm. This was due to the antimicrobial effect of MEAP. Overall, the results recognized that MEAP used as a green corrosion inhibitor for MS 1010 with 83% inhibition efficiency.

Maltodextrin for corrosion mitigation of zinc in sulfamic acid: Electrochemical, surface and spectroscopic studies

Maltodextrin (MLD), a biopolymer was introduced as a novel green inhibitor to mitigate the corrosion of zinc in sulfamic acid medium by weight loss and by electrochemical methods. Conditions were optimized to obtain maximum inhibition efficiency. Thermodynamic parameters were evaluated. The surface morphology was studied by SEM, EDX, AFM analysis. Adsorption of inhibitor was re-affirmed by FT-IR spectroscopy, Atomic absorption spectroscopy (AAS), Raman spectroscopy and powder X-ray diffraction (XRD) analysis. Maximum efficiency of 72% was observed for the addition of 400 ppm of MLD. Surface morphology and spectroscopic studies confirmed the adsorption of MLD onto the surface of zinc. Results obtained by classical and electrochemical methods are in good agreement with one another. Maltodextrin emerged as an effective eco -friendly green inhibitor.

Carrier-microencapsulation of arsenopyrite using Al-catecholate complex: nature of oxidation products, effects on anodic and cathodic reactions, and coating stability under simulated weathering conditions

Mining activities often generate large amounts of sulfide-rich wastes containing arsenopyrite (FeAsS), which when dissolved releases toxic arsenic (As) and generates acid mine drainage (AMD) that are both disastrous to the environment. To suppress arsenopyrite dissolution, a technique that selectively coats sulfide minerals with a protective layer of Al-oxyhydroxide called Al-based carrier-microencapsulation (CME) was developed. Although a previous study of the authors showed that Al-based CME could significantly limit arsenopyrite dissolution, nature of the coating formed on arsenopyrite, including its electrochemical properties, is still not well understood. Moreover, stability of the coating once exposed to weathering conditions remains unclear. Better understanding of these important issues would greatly improve Al-based CME especially in its application to real mine wastes. In this study, nature of the coating formed by Al-based CME was investigated using SEM-EDX, DRIFTS and XPS while the electrochemical properties of the coating were evaluated by cyclic voltammetry and chronoamperometry. Meanwhile, stability of the coating was elucidated using consecutive batch leaching experiments and weathering cell tests. SEM-EDX, DRIFTS and XPS results indicate that the protective coating formed on arsenopyrite by Al-based CME was mainly composed of bayerite (α-Al(OH)₃), gibbsite (γ-Al(OH)₃), and boehmite (γ-AlO(OH)). These Al-based coatings, which have insulating properties, made arsenopyrite less electrochemically active. The coatings also limited the extent of both the anodic and cathodic half-cell reactions of arsenopyrite oxidation that suppressed As release and acid generation. Weathering cell tests indicated that the oxidation of CME-treated arsenopyrite was effectively limited until about 15 days but after this, it started to gradually progress with time due to the increasing acidity of the system where Al-based coatings became unstable. Nonetheless, CME-treated arsenopyrite was less oxidized based on the released amounts of Fe, As and S suppressed by 80, 60 and 70%, respectively, compared with the one treated with control.

Casting of carbon cloth enrobed polypyrrole electrode for high electrochemical performances

The present investigation deals with the fabrication of a novel flexible and highly conductive PPy electrode. This was made by festooning PPy nanoparticles on carbon cloth (CC) by using chemical liquid process. The developed porous PPy@CC composite have good flexibility with low weight (1.1 mg) and high electrical conductivity (89 Ω-1cm-1). Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction spectroscopy (XRD) confirmed the formation of PPy on carbon cloth. Scanning electron micrographs (SEM) reveals that the PPy nanoparticles are encapsulated in carbon cloth. The fabricated carbon cloth has been used for solid-state symmetrical supercapacitors (SC) and low-cost material for electrode in potential energy storage devices. These film electrodes showed much superior electrochemical performance i.e. high stability under different current density, encouraging energy density, lower internal resistivity and higher specific capacitance. Synthesized flexible PPy@CC composite electrodes have brilliant applications in various kinds of electrochemical energy storage devices.

Improving electrochemical performance of reduced graphene oxide by counteracting its aggregation through intercalation of nanoparticles

Herein, we report the fabrication and characterization of hybrid electrode material for supercapacitor applications. CaCO₃ nanoparticles (Nps) are used as intercalator to avoid the restacking behavior of reduced graphene oxide (rGO) nanosheets. CaCO₃ Nps and rGO sheets are fabricated employing precipitation technique and microwave irradiation method, respectively. The intercalation process is performed by magnetic stirring followed by ultra-sonication technique. As prepared CaCO₃ Nps, rGO and rGO intercalated with 2.5 wt.% and 5 wt.% CaCO₃ Nps are characterized using X-ray diffraction analysis, Fourier transform infrared spectroscopy and field emission scanning electron microscopy to evaluate the crystalline characteristics, molecular vibrations, and morphology, respectively. The prepared electrode materials are coated separately on the glassy carbon electrode and their electrochemical performance displayed remarkable capacitance values for rGO nanosheets intercalated with 2.5 wt.% and 5 wt.% CaCO₃ Nps. From the obtained results, it is clear that the specific capacitance of 2.5 wt.% CaCO₃ intercalated rGO displays higher specific capacitance of 84.5 F/g at 5 mV/s with high retention stability. The mechanism behind the improvement in the electrochemical behavior is due to the increase in active surface area which is explained via Brunauer-Emmett-Teller analysis and energy-dispersive X-ray spectroscopic analysis.

Electrochemical studies of DNA interaction and antimicrobial activities of MnII, FeIII, CoII and NiII Schiff base tetraazamacrocyclic complexes

Tetraazamacrocyclic complexes of Mn^II, Fe^III, Co^II and Ni^II have been synthesized by template method. These tetraazamacrocycles have been analyzed with various techniques like molar conductance, IR, UV-vis, mass spectral and cyclic voltammetric studies. On the basis of all these studies, octahedral geometry has been assigned to these tetraazamacrocyclic complexes. The DNA binding properties of these macrocyclic complexes have been investigated by electronic absorption spectra, fluorescence spectra, cyclic voltammetric and differential pulse voltammetric studies. The cyclic voltammetric data showed that i_pc and i_pa were effectively decreased in the presence of calf thymus DNA, which is a strong evidence for the interaction of these macrocyclic complexes with the calf thymus DNA (ct-DNA). The heterogeneous electron transfer rate constant found in the order: K_Co^II>K_Ni^II>K_Mn^II which indicates that Co^II macrocyclic complex has formed a strong intercalated intermediate. The Stern-Volmer quenching constant (K_SV) and voltammetric binding constant were found in the order K_SV(Co^II)>K_SV(Ni^II)>K_SV(Mn^II) and K⁺(Co^II)>K⁺(Ni^II)>K⁺(Mn^II) which shows that Co^II macrocyclic complex exhibits the high interaction affinity towards ct-DNA by the intercalation binding. Biological studies of the macrocyclic complexes compared with the standard drug like Gentamycin, have shown antibacterial activities against E. coli, P. aeruginosa, B. cereus, S. aureus and antifungal activity against C. albicans.

Oxalic acid capped iron oxide nanorods as a sensing platform

A label free impedimetric immunosensor has been fabricated using protein bovine serum albumin (BSA) and monoclonal antibodies against Vibrio cholerae (Ab) functionalized oxalic acid (OA) capped iron oxide (Fe3O4) nanorods for V. cholerae detection. The structural and morphological studies of Fe3O4 and OA-Fe3O4, were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and dynamic light scattering (DLS) techniques. The average crystalline size of Fe3O4, OA-Fe3O4 nanorods were obtained as about 29±1 and 39±1nm, respectively. The hydrodynamic radius of nanorods is found as 116nm (OA-Fe3O4) and 77nm (Fe3O4) by DLS measurement. Cytotoxicity of Fe3O4 and OA-Fe3O4 nanorods has been investigated in the presence of human epithelial kidney (HEK) cell line 293 using MTT assay. The cell viability and proliferation studies reveal that the OA-Fe3O4 nanorods facilitate cell growth. The results of electrochemical response studies of the fabricated BSA/Ab/OA-Fe2O3/ITO immunosensor exhibits good linearity in the range of 12.5-500ng mL(-1) with low detection limit of 0.5ng mL(-1), sensitivity 0.1Ωng(-1)ml(-1)cm(-2) and reproducibility more than 11 times.

Synthesis of mononuclear copper(II) complexes of acyclic Schiff's base ligands: spectral, structural, electrochemical, antibacterial, DNA binding and cleavage activity

The mononuclear copper(II) complexes (1&2) of ligands L(1) [N,N'-bis(2-hydroxy-5-methylbenzyl)-1,4-bis(3-iminopropyl)piperazine] or L(2) [N,N'-bis(2-hydroxy-5-bromobenzyl)-1,4-bis(3-iminopropyl) piperazine] have been synthesized and characterised. The single crystal X-ray study had shown that ligands L(1) and L(2) crystallize in a monoclinic crystal system with P21/c space group. The mononuclear copper(II) complexes show one quasireversible cyclic voltammetric response near cathodic region (-0.77 to -0.85 V) in DMF assignable to the Cu(II)/Cu(I) couple. Binding interaction of the complexes with calf thymus DNA (CT DNA) investigated by absorption studies and fluorescence spectral studies show good binding affinity to CT DNA, which imply both the copper(II) complexes can strongly interact with DNA efficiently. The copper(II) complexes showed efficient oxidative cleavage of plasmid pBR322 DNA in the presence of 3-mercaptopropionic acid as reducing agent through a mechanistic pathway involving formation of singlet oxygen as the reactive species. The Schiff bases and their Cu(II) complexes have been screened for antibacterial activities which indicates that the complexes exhibited higher antimicrobial activity than the free ligands.