Simultaneous characterization of selenium and arsenic analytes via ion-pairing reversed phase chromatography with inductively coupled plasma and electrospray ionization ion trap mass spectrometry for detection applications to river water, plant extract and urine matrices

Speciation of inorganic arsenic with mixed mode HPLC-ESI-MS and Arsenite Oxidation

It has been challenging to analyze inorganic arsenic (iAs) with anion exchange HPLC-Electrospray Ionization-Mass spectrometry (HPLC-ESI-MS), because arsenite (As(III)) is difficult to retain on column and the salts in mobile phase causes ionization suppression of iAs. To address these issues, a method has been developed involving the determination of arsenate (As(V)) with mixed mode HPLC-ESI-MS and the conversion of As(III) to As(V) for total iAs. As(V) was separated from other chemicals on Newcrom B, a bi-modal HPLC column involving anion exchange and reverse phase interaction. The elution employed a two-dimensional gradient, including a formic acid gradient to elute As(V) and a concurrent alcohol gradient to elute organic anions used in sample preparations. As(V) was detected by Selected Ion Recording (SIR) in negative mode at m/z = 141 with a QDa (single quad) detector. As(III) was quantitatively converted to As(V) by mCPBA oxidation and measured for total iAs. By replacing salt with formic acid in elution, the ionization efficiency for As(V) was greatly enhanced in ESI interface. The limit of detection (LOD) for As(V) and As(III) were 0.0263 μM (1.97 ppb) and 0.0398 μM (2.99 ppb), respectively. The linear range was 0.05-1 μM. The method has been used to characterize iAs speciation change in the solution and precipitation in a simulated iron-rich groundwater caused by air exposure.

Novel in situ method based on diffusive gradients in thin-films with lanthanum oxide nanoparticles for measuring As, Sb, and V and in waters

Lanthanum oxide nanoparticles (nano-La₂O₃) was used to develop a novel binding gel within an in situ passive sampler based on diffusive gradients in thin-films technique (NL-DGT) for measuring As(V), Sb(V), and V(V). Performance characteristics of NL-DGT were independent of pH (pH: 3.1-7.9 for As, 3.1-8.5 for V, and 3.1-6.5 for Sb) and ionic strength (0.1-500 mmol L^-1 for As and V, and 0.1-200 mmol L^-1 for Sb). No obvious competition effects among As, Sb, and V with different concentration ratios were found for NL-DGT measurement. Long term storage (8-188 d) of the nano-La₂O₃ gels in 0.01 mol L^-1 NaNO₃ at 4 °C did not affect their performance. During the field deployments in Yangtze and Jiuxiang River, NL-DGT measured concentrations of As and V were similar to those measured by the grab samples, while some differences were found for Sb between DGT and grab sampling because higher pH (∼8.0) in the studied rivers caused the performance deterioration of NL-DGT. Generally, the newly developed NL-DGT is suitable for monitoring As and V in freshwater from acidic to light alkaline and Sb in acidic and neutral water.

Occurrence, toxicity, and speciation analysis of arsenic in edible mushrooms

Owing to the strong concentration and biotransformation of arsenic, the influence of some edible mushrooms on human health has attracted widespread attention. The toxicity of arsenic greatly depends on its species, so the speciation analysis of arsenic is of critical importance. The aim of the present review is to highlight recent advances in arsenic speciation analysis in edible mushrooms. We summarized the contents and distribution of arsenic species in some edible mushrooms, the methods of sample preparation, and the techniques for their identification and quantification. Stability of the arsenic species during sample pretreatment and storage is also briefly discussed.

Selenium analysis in waters. Part 2: Speciation methods

In aquatic ecosystems, there is often no correlation between the total concentration of selenium present in the water column and the toxic effects observed in that environment. This is due, in part, to the variation in the bioavailability of different selenium species to organisms at the base of the aquatic food chain. The first part of this review (Kumkrong et al., 2018) discusses regulatory framework and standard methodologies for selenium analysis in waters. In this second article, we are reviewing the state of speciation analysis and importance of speciation data for decision makers in industry and regulators. We look in detail at fractionation methods for speciation, including the popular selective sequential hydride generation. We examine advantages and limitations of these methods, in terms of achievable detection limits and interferences from other matrix species, as well as the potential to over- or under-estimate operationally-defined fractions based on the various conversion steps involved in fractionation processes. Additionally, we discuss methods of discrete speciation (through separation methods), their importance in analyzing individual selenium species, difficulties associated with their implementation, as well as ways to overcome these difficulties. We also provide a brief overview of biological treatment methods for the remediation of selenium-contaminated waters. We discuss the importance of selenium speciation in the application of these methods and their potential to actually increase the bioavailability of selenium despite decreasing its total waterborne concentration.

A Review on Recent Applications of High-Performance Liquid Chromatography in Metal Determination and Speciation Analysis

High-performance liquid chromatography (HPLC) has several advantages over the conventional methods due to their operational simplicity. It is a vital tool to determine metal ions having same mass but different electronic configuration, to separate complex mixtures and to resolve ions that may be indistinguishable by mass spectrometry alone. Metal ions play vital role in many biological processes and involved in setting up of many diseases. Therefore, the development of simple methods for the detection and quantification of metals in real samples might serve as diagnostic tools for various diseases. This review article focuses on the recent main feature of this technique, i.e. speciation of metal ions and their applications to series of problem of metal ion chemistry in different environmental matrixes. Speciation of metals is of increasing interest and has a great importance because of bioavailability, environmental mobility, toxicity and potential risk of metals. With the capability of partitioning the complex species of different metal ions, HPLC is an efficient technique for this task. This review summarizes recent advances in the development of HPLC to the fundamental understanding of metal ion chemistry in the environment and discusses all the issues that still need a lot of consideration. It has been classified into different sections depending on the role of HPLC in separation used and metal speciation; furthermore, the underlying sample preconcentration techniques and detection systems involved for the determination of metal ions and their applications were discussed.

Electrochemical Oxidation of l-selenomethionine and Se-methylseleno-l-cysteine at a Thiol-Compound-Modified Gold Electrode: Its Application in a Flow-Through Voltammetric Sensor

A flow-electrolytic cell that consists of a bare gold wire or of different thiol-compound-modified gold electrodes (such as 2,4-thiazolidinedione, 2-mercapto-5-thiazoline, 2-mercaptothiazoline, l-cysteine, thioglycolic acid) was designed to be used in a voltammetric detector to identify l-selenomethionine and Se-methylseleno-l-cysteine using high-performance liquid chromatography. Both l-selenomethionine and Se-methylseleno-l-cysteine are more efficiently electrochemically oxidized on a thiol/gold than on a bare gold electrode. For the DC mode, and for measurements with suitable experimental parameters, a linear concentration from 10 to 1600 ng·mL⁻¹ was found. The limits of quantification for l-selenomethionine and Se-methylseleno-l-cysteine were below 10 ng·mL⁻¹. The method can be applied to the quantitative determination of l-selenomethionine and Se-methylseleno-l-cysteine in commercial selenium-containing supplement products. Findings using high-performance liquid chromatography with a flow-through voltammetric detector and ultraviolet detector are comparable.

Multielemental speciation analysis by advanced hyphenated technique - HPLC/ICP-MS: A review

Speciation analysis has become an invaluable tool in human health risk assessment, environmental monitoring or food quality control. Another step is to develop reliable multielemental speciation methodologies, to reduce costs, waste and time needed for the analysis. Separation and detection of species of several elements in a single analytical run can be accomplished by high performance liquid chromatography hyphenated to inductively coupled plasma mass spectrometry (HPLC/ICP-MS). Our review assembles articles concerning multielemental speciation determination of: As, Se, Cr, Sb, I, Br, Pb, Hg, V, Mo, Te, Tl, Cd and W in environmental, biological, food and clinical samples analyzed with HPLC/ICP-MS. It addresses the procedures in terms of following issues: sample collection and pretreatment, selection of optimal conditions for elements species separation by HPLC and determination using ICP-MS as well as metrological approach. The presented work is the first review article concerning multielemental speciation analysis by advanced hyphenated technique HPLC/ICP-MS.

Mass spectrometric detection of trace anions: The evolution of paired-ion electrospray ionization (PIESI)

The negative-ion mode of electrospray ionization mass spectrometry (ESI-MS) is intrinsically less sensitive than the positive-ion mode. The detection and quantitation of anions can be performed in positive-ion mode by forming specific ion-pairs during the electrospray process. The paired-ion electrospray ionization (PIESI) method uses specially synthesized multifunctional cations to form positively charged adducts with the anions to be analyzed. The adducts are detected in the positive-ion mode and at higher m/z ratios to produce excellent signal-to-noise ratios and limits of detection that often are orders of magnitude better than those obtained with native anions in the negative-ion mode. This review briefly summarizes the different analytical approaches to detect and separate anions. It focuses on the recently introduced PIESI method to present the most effective dicationic, tricationic, and tetracationic reagents for the detection of singly and multiply charged anions and some zwitterions. The mechanism by which specific structural molecular architectures can have profound effects on signal intensities is also addressed.

Arsenic, Antimony, Chromium, and Thallium Speciation in Water and Sediment Samples with the LC-ICP-MS Technique

Chemical speciation is a very important subject in the environmental protection, toxicology, and chemical analytics due to the fact that toxicity, availability, and reactivity of trace elements depend on the chemical forms in which these elements occur. Research on low analyte levels, particularly in complex matrix samples, requires more and more advanced and sophisticated analytical methods and techniques. The latest trends in this field concern the so-called hyphenated techniques. Arsenic, antimony, chromium, and (underestimated) thallium attract the closest attention of toxicologists and analysts. The properties of those elements depend on the oxidation state in which they occur. The aim of the following paper is to answer the question why the speciation analytics is so important. The paper also provides numerous examples of the hyphenated technique usage (e.g., the LC-ICP-MS application in the speciation analysis of chromium, antimony, arsenic, or thallium in water and bottom sediment samples). An important issue addressed is the preparation of environmental samples for speciation analysis.

Efficient interface for online coupling of capillary electrophoresis with inductively coupled plasma-mass spectrometry and its application in simultaneous speciation analysis of arsenic and selenium

A simple and highly efficient online system coupling of capillary electrophoresis to inductively coupled plasma-mass spectrometry (CE-ICP-MS) for simultaneous separation and determination of arsenic and selenium compounds was developed. CE was coupled to an ICP-MS system by a sprayer with a novel direct-injection high-efficiency nebulizer (DIHEN) chamber as the interface. By using this interface, six arsenic species, including arsenite (As(III), arsenate (As(V)), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), and arsenocholine (AsC) and five selenium species (such as sodium selenite (Se(IV)), sodium selenate (Se(VI)), selenocysteine (SeCys), selenomethionine (SeMet), and Se-methylselenocysteine (MeSeCys)) were baseline-separated and determined in a single run within 9 min under the optimized conditions. Minimum dead volume, low and steady sheath flow liquid, high nebulization efficiency, and high sample transport efficiency were obtained by using this interface. Detection limits were in the range of 0.11-0.37 μg L(-1) for the six arsenic compounds (determined as (75)As at m/z 75) and 1.33-2.31 μg L(-1) for the five selenium species (determined as (82)Se at m/z 82). Repeatability expressed as the relative standard deviations (RSD, n = 6) of both migration time and peak area were better than 2.68% for arsenic compounds and 3.28% for selenium compounds, respectively. The proposed method had been successfully applied for the determination of arsenic and selenium species in the certified reference materials DORM-3, water, urine, and fish samples.

Simultaneous speciation analysis of inorganic arsenic, chromium and selenium in environmental waters by 3-(2-aminoethylamino) propyltrimethoxysilane modified multi-wall carbon nanotubes packed microcolumn solid phase extraction and ICP-MS

Speciation analysis of inorganic arsenic, chromium and selenium in environmental waters is of great significance for the monitoring of environmental pollution. In this work, 3-(2-aminoethylamino) propyltrimethoxysilane (AAPTS) functionalized multi-wall carbon nanotubes (MWCNTs) were synthesized and employed as the adsorbent for simultaneous speciation analysis of inorganic arsenic, chromium and selenium in environmental waters by microcolumn solid-phase extraction (SPE)-inductively coupled plasma mass spectrometry (ICP-MS). It was found that As(V), Cr(VI) and Se(VI) could be selectively adsorbed on the microcolumn packed with AAPTS-MWCNTs adsorbent at pH around 2.2, while As(III), Cr(III) and Se(IV) could not be retained at this pH and passed through the microcolumn directly. Total inorganic arsenic, chromium and selenium was determined after the oxidation of As(III), Cr(III) and Se(IV) to As(V), Cr(VI) and Se(VI) with 10.0 μmol L(-1) KMnO4. The assay of As(III), Cr(III) and Se(IV) was based on subtracting As(V), Cr(VI) and Se(VI) from the total As, Cr and Se, respectively. Under the optimized conditions, the detection limits of 15, 38 and 16 ng L(-1) with the relative standard deviations (RSDs) of 7.4, 2.4 and 6.2% (c=1 µg L(-1), n=7) were obtained for As(V), Cr(VI) and Se(VI), respectively. The developed method was validated by analyzing four Certified Reference Materials, rainwater, Yangtze River and East Lake waters.

Sequential photocatalyst-assisted digestion and vapor generation device coupled with anion exchange chromatography and inductively coupled plasma mass spectrometry for speciation analysis of selenium species in biological samples

We have developed an on-line sequential photocatalyst-assisted digestion and vaporization device (SPADVD), which operates through the nano-TiO2-catalyzed photo-oxidation and reduction of selenium (Se) species, for coupling between anion exchange chromatography (LC) and inductively coupled plasma mass spectrometry (ICP-MS) systems to provide a simple and sensitive hyphenated method for the speciation analysis of Se species without the need for conventional chemical digestion and vaporization techniques. Because our proposed on-line SPADVD allows both organic and inorganic Se species in the column effluent to be converted on-line into volatile Se products, which are then measured directly through ICP-MS, the complexity of the procedure and the probability of contamination arising from the use of additional chemicals are both low. Under the optimized conditions for SPADVD - using 1g of nano-TiO2 per liter, at pH 3, and illuminating for 80 s - we found that Se(IV), Se(VI), and selenomethionine (SeMet) were all converted quantitatively into volatile Se products. In addition, because the digestion and vaporization efficiencies of all the tested selenicals were improved when using our proposed on-line LC/SPADVD/ICP-MS system, the detection limits for Se(IV), Se(VI), and SeMet were all in the nanogram-per-liter range (based on 3σ). A series of validation experiments - analysis of neat and spiked extracted samples - indicated that our proposed methods could be applied satisfactorily to the speciation analysis of organic and inorganic Se species in the extracts of Se-enriched supplements.

Bipolar mass spectrometry of labile coordination complexes, redox active inorganic compounds, and proteins using a glass nebulizer for sonic-spray ionization

In this study, we report on the development of a novel nebulizer configuration for sonic-spray ionization (SSI) mass spectrometry (MS), more specifically for a version of SSI that is referred to as Venturi easy ambient sonic-spray ionization (V-EASI) MS. The developed nebulizer configuration is based on a commercially available pneumatic glass nebulizer that has been used extensively for aerosol formation in atomic spectrometry. In the present study, the nebulizer was modified in order to achieve efficient V-EASI-MS operation. Upon evaluating this system, it has been demonstrated that V-EASI-MS offers some distinct advantages for the analysis of coordination compounds and redox active inorganic compounds over the predominantly used electrospray ionization (ESI) technique. Such advantages, for this type of compounds, are demonstrated here for the first time. More specifically, a series of labile heptanuclear heterometallic [Cu(II) 6Ln(III)] clusters held together with artificial amino acid ligands, in addition to easily oxidized inorganic oxyanions of selenium and arsenic, were analyzed. The observed advantages pertain to V-EASI appearing to be a "milder" ionization source than ESI, not requiring electrical potentials for gas phase ion formation, thus eliminating the possibility of unwanted redox transformations, allowing for the "simultaneous" detection of negative and positive ions (bipolar analysis) without the need to change source ionization conditions, and also not requiring the use of syringes and delivery pumps. Because of such features, especially because of the absence of ionization potentials, EASI can be operated with minimal requirements for source parameter optimization. We observed that source temperature and accelerating voltage do not seem to affect labile compounds to the extent they do in ESI-MS. In addition, bipolar analysis of proteins was demonstrated here by acquiring both positive and negative ion mass spectra from the same protein solutions, without the need to independently adjust solution and source conditions in each mode. Finally, the simple and efficient operation of a dual-nebulizer configuration was demonstrated for V-EASI-MS for the first time.

Arsenic exposure and incidence of type 2 diabetes in Southwestern American Indians

Association of urinary arsenic concentration with incident diabetes was examined in American Indians from Arizona who have a high prevalence of type 2 diabetes and were screened for diabetes between 1982 and 2007. The population resides where drinking water contains arsenic at concentrations above federally recommended limits. A total of 150 nondiabetic subjects aged ≥25 years who subsequently developed type 2 diabetes were matched by year of examination and sex to 150 controls who remained nondiabetic for ≥10 years. Total urinary arsenic concentration, adjusted for urinary creatinine level, ranged from 6.6 µg/L to 123.1 µg/L, and inorganic arsenic concentration ranged from 0.1 µg/L to 36.0 µg/L. In logistic regression models adjusted for age, sex, body mass index, and urinary creatinine level, the odds ratios for incident diabetes were 1.11 (95% confidence interval (CI): 0.79, 1.57) and 1.16 (95% CI: 0.89, 1.53) for a 2-fold increase in total arsenic and inorganic arsenic, respectively. Categorical analyses suggested a positive relationship between quartiles of inorganic arsenic and incident diabetes (P = 0.056); post-hoc comparison of quartiles 2-4 with quartile 1 revealed 2-fold higher odds of diabetes in the upper quartiles (OR = 2.14, 95% CI: 1.19, 3.85). Modestly elevated exposure to inorganic arsenic may predict type 2 diabetes in American Indians. Larger studies that include measures of speciated arsenic are required for confirmation.

Microwave-assisted extraction and ion chromatography dynamic reaction cell inductively coupled plasma mass spectrometry for the speciation analysis of arsenic and selenium in cereals

An ion chromatography dynamic reaction cell inductively coupled plasma mass spectrometric (IC-DRC-ICP-MS) method for the speciation of arsenic and selenium compounds is described. Chromatographic separation was performed in a gradient elution mode using 0.5 mmol L(-1) ammonium citrate in 1% methanol (pH 4.5) and 15 mmol L(-1) ammonium citrate in 1% methanol (pH 8.0). The potentially interfering (38)Ar(40)Ar(+) and (40)Ar(40)Ar(+) at selenium masses of m/z 78 and 80 were reduced in intensity by approximately 3 orders of magnitude by using 1.0 mL min(-1) CH(4) as a reactive cell gas in the DRC. Arsenic was determined as the adduct ion (75)As(12)CH(2)(+) at m/z 89. The detection limits of the procedure were in the ranges of 0.006-0.009 ng As mL(-1) and 0.009-0.03 ng Se mL(-1), respectively. This method has been applied to determine various arsenic and selenium compounds in cereal samples. The accuracy of the method has been verified by comparing the sum of the concentrations of individual species obtained by the present procedure with the total concentration of elements. The arsenic and selenium compounds were quantitatively extracted with a Protease XIV and α-amylase solution in a microwave field at 70°C during a period of 30 min. The spike recoveries were in the range of 94-105% for all determinations.

Arsenic speciation in biomedical sciences: recent advances and applications

Speciation analysis of trace elements is an important issue in biomedical and toxicological sciences because different elemental species have different effects on health and the environment. For humans, arsenic (As) is a toxic element; the toxicity of As compounds is highly dependent on its chemical form. Although inorganic As compounds are human carcinogens, organic arsenicals are relatively less toxic. This article deals with recent advances and applications of methods for As speciation in biomedical sciences, with emphasis on the specimens commonly encountered in biomedical laboratories.

A transgenic Drosophila model for arsenic methylation suggests a metabolic rationale for differential dose-dependent toxicity endpoints

The mechanisms by which exposure to arsenic induces its myriad pathological effects are undoubtedly complex, while individual susceptibility to their type and severity is likely to be strongly influenced by genetic factors. Human metabolism of arsenic into methylated derivatives, once presumed to result in detoxification, may actually produce species with significantly greater pathological potential. We introduce a transgenic Drosophila model of arsenic methylation, allowing its consequences to be studied in a higher eukaryote exhibiting conservation of many genes and pathways with those of human cells while providing an important opportunity to uncover mechanistic details via the sophisticated genetic analysis for which the system is particularly well suited. The gene for the human enzyme, arsenic (+3 oxidation state) methyltransferase, was introduced into nonmethylating Drosophila under inducible control. Transgenic flies were characterized for enzyme inducibility, production of methylated arsenic species, and the dose-dependent consequences for chromosomal integrity and organismal longevity. Upon enzyme induction, transgenic flies processed arsenite into mono and dimethylated derivatives identical to those found in human urine. When induced flies were exposed to 9 ppm arsenite, chromosomal stability was clearly reduced, whereas at much higher doses, adult life span was significantly increased, a seemingly paradoxical pair of outcomes. Measurement of arsenic body burden in the presence or absence of methylation suggested that enhanced clearance of methylated species might explain this greater longevity under acutely toxic conditions. Our study clearly demonstrates both the hazards and the benefits of arsenic methylation in vivo and suggests a resolution based on evolutionary grounds.

Elucidating the selenium and arsenic metabolic pathways following exposure to the non-hyperaccumulating Chlorophytum comosum, spider plant

Although many studies have investigated the metabolism of selenium and arsenic in hyperaccumulating plants for phytoremediation purposes, few have explored non-hyperaccumulating plants as a model for general contaminant exposure to plants. In addition, the result of simultaneous supplementation with selenium and arsenic has not been investigated in plants. In this study, Chlorophytum comosum, commonly known as the spider plant, was used to investigate the metabolism of selenium and arsenic after single and simultaneous supplementation. Size exclusion and ion-pairing reversed phase liquid chromatography were coupled to an inductively coupled plasma mass spectrometer to obtain putative metabolic information of the selenium and arsenic species in C. comosum after a mild aqueous extraction. The chromatographic results depict that selenium and arsenic species were sequestered in the roots and generally conserved upon translocation to the leaves. The data suggest that selenium was directly absorbed by C. comosum roots when supplemented with Se(VI), but a combination of passive and direct absorption occurred when supplemented with Se(IV) due to the partial oxidation of Se(IV) to Se(VI) in the rhizosphere. Higher molecular weight selenium species were more prevalent in the roots of plants supplemented with Se(IV), but in the leaves of plants supplemented with Se(VI) due to an increased translocation rate. When supplemented as As(III), arsenic is proposed to be passively absorbed as As(III) and partially oxidized to As(V) in the plant root. Although total elemental analysis demonstrates a selenium and arsenic antagonism, a compound containing selenium and arsenic was not present in the general aqueous extract of the plant.