Development of solid-phase microextraction followed by gas chromatography-mass spectrometry for rapid analysis of volatile organic chemicals in mainstream cigarette smoke

Characterization of cigarette smokeomics by in situ solid-phase microextraction and confined-space direct analysis in real time mass spectrometry

Characterization of chemical composition in cigarette smoke is essential for establishing smoke-related exposure estimates. Currently used methods require complex sample preparation with limited capability for obtaining accurate chemical information. We have developed an in situ solid-phase microextraction (SPME) method for online processing of smoke aerosols and directly coupling the SPME probes with confined-space direct analysis in real time (cDART) ion source for high-resolution mass spectrometry (MS) analysis. In a confined space, the substances from SPME probes can be efficiently desorbed and ionized using the DART ion source, and the diffusion and evaporation of volatile species into the open air can be largely avoided. Using SPME-cDART-MS, mainstream smoke (MSS) and side-stream smoke (SSS) can be investigated and the whole analytical protocol can be accomplished in a few min. More than five hundred substances and several classes of compounds were detected and identified. The relative contents of 13 tobacco alkaloids were compared between MSS and SSS. Multivariate data analysis unveiled differences between different types of cigarette smoke and also discovered the characteristic ions. The method is reliable with good reproducibility and repeatability, and has the potential to be quantitative. This study provides a simple and high-efficiency method for smokeomics profiling of complex aerosol samples with in situ online extraction of volatile samples, and direct integration of extracted probes with a modified ambient ionization technique.

Nontargeted Analysis in Tobacco Research: Challenges and Opportunities

Tobacco products are evolving at a pace that has outstripped tobacco control, leading to a high prevalence of tobacco use in the population. Researchers have been tirelessly developing suitable techniques to assess these products' emissions, toxicity, and public health impact. The nonclinical testing of tobacco products to assess the chemical profile of emissions is needed for evidence-based regulations. This testing has largely relied on targeted analytical methods that focus on constituent lists that may fall short in determining the toxicity of newly designed tobacco products. Nontargeted analysis (NTA), or the process of identifying and quantifying compounds within a complex matrix without prior knowledge of its chemical composition, is a promising technique for tobacco regulation, but it is not without challenges. The lack of standardized methods for sample generation, sample preparation, chromatographic separation, compound identification, and data analysis and reporting must be addressed so that the quality and reproducibility of the data generated by NTA can be benchmarked. This review discusses the challenges and highlights the opportunities of NTA in studying tobacco product constituents and emissions.

The botanical biofiltration of volatile organic compounds and particulate matter derived from cigarette smoke

Despite the growing use of control measures, environmental tobacco smoke (ETS) remains a significant pollutant source in indoor air in many areas of the world. Current control methods for reducing ETS exposure are inadequate to protect public health in environments where cigarettes are smoked. An alternative solution is botanical biofiltration which has previously been shown to lower concentrations of volatile organic compounds (VOCs) and particulate matter (PM) from a range of polluted air streams. This study is the first to assess the potential of a botanical biofilter with the species Spathiphyllum wallisii (Peace Lily) for the removal of cigarette-derived VOCs and all size fractions of PM. Single pass removal efficiencies of 43.26% for total VOCs and 34.37% for total suspended particles were achieved. The botanical biofilter reduced the concentrations of a range of harmful ETS chemicals including nicotine, limonene, and toluene. Evaluation of the re-emission of ETS constituents filtered by the botanical biofilter revealed no particle resuspension or off gassing. The results demonstrate the potential of botanical biofilters to reduce public ETS exposure, although further research is needed to improve upon and ensure the efficiency of these systems for practical applications.

Determination of volatile organic compounds (VOCs) levels from various smoking cessation aids by using gas chromatography-mass spectrometry methodology

An analytical method was validated and developed to determine the levels of volatile organic compounds (VOCs) including 1,3-butadiene, isoprene, acrylonitrile, benzene, toluene, and styrene from smoking cessation aids using by gas chromatography-mass spectrometry (GC-MS). Seventeen non-ignitable cigarette type of smoking cessation aids, liquid-phase of smoking cessation aids, gas-phase of smoking cessation aids, and ignitable cigarette type of smoking cessation aids were analyzed for levels of six VOCs. The proposed method for six VOCs was validated in satisfactory linearity (R² > 0.99), recovery (80.38-119.14%). limit of detection (LOD) (0.05-0.19 μg/ml), limit of quantification (LOQ) (0.07-0.18 μg/ml), accuracy (80.47-117.28%), and precision (0.15-7.22%). The mean concentrations of six VOCs were generated in 1,3-butadiene (6.18 μg/cigarette), isoprene (0.34 μg/cigarette), acrylonitrile (0.003 μg/cigarette), benzene (ND = not detected, the lower limit of detection), toluene (0.27 μg/cigarette), styrene (0.13 μg/cigarette). Results showed low levels of VOCs from smoking cessation aid except from liquid-phase of smoking cessation aids. These results are necessary to investigate unintentional hazardous substances generated from smoking cessation aids, and develop accurate analytical method in order to obtain scientific basis for safety management.

Comprehensive comparative compositional study of the vapour phase of cigarette mainstream tobacco smoke and tobacco heating product aerosol

A simple direct sample collection/dilution and introduction method was developed using quartz wool and Tenax/sulficarb sorbents for thermal desorption and comprehensive two-dimensional gas chromatography (TD-GC × GC) analyses of volatile organic compounds from vapour phase (VP) fractions of aerosol produced by tobacco heating products (THP1.0) and 3R4F mainstream tobacco smoke (MTS). Analyses were carried out using flame ionisation detection (FID) for semi-quantification and both low and high resolution time-of-flight mass spectrometry (LR/HR-TOFMS) for qualitative comparison and peak assignment. Qualitative analysis was carried out by combining identification data based on linear retention indices (LRIs) with a match window of ±10 index units, mass spectral forward and reverse library searches (from LR and HRTOFMS spectra) with a match factor threshold of >700 (both forward and reverse), and accurate mass values of ± 3 ppm for increased confidence in peak identification. Using this comprehensive approach of data mining, a total of 79 out of 85 compounds and a total of 198 out of 202 compounds were identified in THP1.0 aerosol and in 3R4F MTS, respectively. Among the identified analytes, a set of 35 compounds was found in both VP sample types. Semi-quantitative analyses were carried out using a chemical class-based external calibration method. Acyclic, alicyclic, aromatic hydrocarbons and ketones appeared to be prominent in 3R4F MTS VP, whereas larger amounts of aldehydes, ketones, heterocyclic hydrocarbons and esters were present in THP1.0 aerosol VP. The results demontsrate the capability and versatility of the method for the characterization and comparison of complex aerosol samples and highlighted the relative chemical simplicity of THP1.0 aerosol in comparison to MTS.

Headspace solid-phase microextraction coupled to comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry for the analysis of aerosol from tobacco heating product

A method involving headspace solid-phase microextraction (HS-SPME) and comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC-TOFMS) was developed and optimised to elucidate the volatile composition of the particulate phase fraction of aerosol produced by tobacco heating products (THPs). Three SPME fiber types were studied in terms of extraction capacity and precision measurements. Divinylbenzene polydimethylsiloxane appeared as the most efficient coating for these measurements. A central composite design of experiment was utilised for the optimization of the extraction conditions. Qualitative and semi-quantitative analysis of the headspace above THP aerosol condensate was carried out using optimised extraction conditions. Semi-quantitative analyses of detected constituents were performed by assuming that their relative response factors to the closest internal standard (itR) were equal to 1. Using deconvoluted mass spectral data (library similarity and reverse match >750) and linear retention indices (match window of ±15 index units), 205 peaks were assigned to individual compounds, 82 of which (including 43 substances previously reported to be present in tobacco) have not been reported previously in tobacco aerosol. The major volatile fraction of the headspace contained ketones, alcohols, aldehydes, alicyclic hydrocarbons alkenes, and alkanes. The method was further applied to compare the volatiles from the particulate phase of aerosol composition of THP with that of reference cigarette smoke and showed that the THP produced a less complex chemical mixture. This new method showed good efficiency and precision for the peak areas and peak numbers from the volatile fraction of aerosol particulate phase for both THP and reference cigarettes.

Evaluation of Two Commercially Available Cannabidiol Formulations for Use in Electronic Cigarettes

Since 24 states and the District of Columbia have legalized marijuana in some form, suppliers of legal marijuana have developed Cannabis sativa products for use in electronic cigarettes (e-cigarettes). Personal battery powered vaporizers, or e-cigarettes, were developed to deliver a nicotine vapor such that smokers could simulate smoking tobacco without the inherent pathology of inhaled tobacco smoke. The liquid formulations used in these devices are comprised of an active ingredient such as nicotine mixed with vegetable glycerin (VG) and/or propylene glycol (PG) and flavorings. A significant active ingredient of C. sativa, cannabidiol (CBD), has been purported to have anti-convulsant, anti-nociceptive, and anti-psychotic properties. These properties have potential medical therapies such as intervention of addictive behaviors, treatments for epilepsy, management of pain for cancer patients, and treatments for schizophrenia. However, CBD extracted from C. sativa remains a DEA Schedule I drug since it has not been approved by the FDA for medical purposes. Two commercially available e-cigarette liquid formulations reported to contain 3.3 mg/mL of CBD as the active ingredient were evaluated. These products are not regulated by the FDA in manufacturing or in labeling of the products and were found to contain 6.5 and 7.6 mg/mL of CBD in VG and PG with a variety of flavoring agents. Presently, while labeled as to content, the quality control of manufacturers and the relative safety of these products is uncertain.

Multivariate analysis of mainstream tobacco smoke particulate phase by headspace solid-phase micro extraction coupled with comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry

A method involving headspace solid-phase microextraction (HS-SPME) and comprehensive two-dimensional gas chromatography (GC×GC) coupled to time-of-flight mass spectrometry (TOFMS) was developed and applied to evaluate profiles of volatile compounds present in mainstream tobacco smoke particulate matter trapped on glass fiber filters. Six SPME fibers were tested for the extraction capacities toward selected compounds, showing the best results for the polyacrylate fiber. The optimization of the extraction conditions was carried out using multivariate response surface methodology. Two cigarette types differing in a filter design were analyzed using optimized conditions. A template was built in order to generate comprehensive chemical information, which conceded obtaining consistent information across 24 chromatograms. Principal component analysis (PCA) allowed a clear differentiation of the studied cigarette types. Fisher ratio analysis allowed identification of compounds responsible for the chemical differences between the cigarette samples. Of the selected 143 most important ones, 134 analytes were reduced by the active carbon filter, while for nine, classical cellulose acetate filter was more efficient.

Simultaneous analysis of 22 volatile organic compounds in cigarette smoke using gas sampling bags for high-throughput solid-phase microextraction

Quantifying volatile organic compounds (VOCs) in cigarette smoke is necessary to establish smoke-related exposure estimates and evaluate emerging products and potential reduced-exposure products. In response to this need, we developed an automated, multi-VOC quantification method for machine-generated, mainstream cigarette smoke using solid-phase microextraction gas chromatography-mass spectrometry (SPME-GC-MS). This method was developed to simultaneously quantify a broad range of smoke VOCs (i.e., carbonyls and volatiles, which historically have been measured by separate assays) for large exposure assessment studies. Our approach collects and maintains vapor-phase smoke in a gas sampling bag, where it is homogenized with isotopically labeled analogue internal standards and sampled using gas-phase SPME. High throughput is achieved by SPME automation using a CTC Analytics platform and custom bag tray. This method has successfully quantified 22 structurally diverse VOCs (e.g., benzene and associated monoaromatics, aldehydes and ketones, furans, acrylonitrile, 1,3-butadiene, vinyl chloride, and nitromethane) in the microgram range in mainstream smoke from 1R5F and 3R4F research cigarettes smoked under ISO (Cambridge Filter or FTC) and Intense (Health Canada or Canadian Intense) conditions. Our results are comparable to previous studies with few exceptions. Method accuracy was evaluated with third-party reference samples (≤15% error). Short-term diffusion losses from the gas sampling bag were minimal, with a 10% decrease in absolute response after 24 h. For most analytes, research cigarette inter- and intrarun precisions were ≤20% relative standard deviation (RSD). This method provides an accurate and robust means to quantify VOCs in cigarette smoke spanning a range of yields that is sufficient to characterize smoke exposure estimates.

Investigation of the chemical compositions in tobacco of different origins and maturities at harvest by GC-MS and HPLC-PDA-QTOF-MS

Tobacco samples of a same cultivar grown in different plantations in China were evaluated for their chemical compositions at different maturities for the first time. This was accomplished by a comprehensive and reliable method using gas chromatography-mass spectrometry (GC-MS) and high performance liquid chromatography-photodiode array-quadrupole time-of-flight mass spectrometry (HPLC-PDA-QTOF-MS) to analyze the fat-soluble and polar components in 12 batches of tobacco samples of three origins and four maturities. The GC-MS analyses showed that tobacco samples harvested at 40 days after transplantation exhibited more fat-soluble components, while those harvested at 100 days after transplantation exhibited the least fat-soluble components. Tentatively, identification of the main components as well as quantitative analyses of eight reference compounds, including five alkaloids, two polyphenols, and a coumarin, was performed by the developed HPLC-QTOF-PDA method. Results showed significant differences among origins and maturities in the contents of these compounds. The nicotine contents showed great variety among the 12 tobacco samples. The highest nicotine content were found in a sample from Zhengzhou harvested at 40 days after transplantation (ZZ-T with 25399.39 ± 308.95 μg/g), and the lowest nicotine level was detected in a sample from Zunyi harvested at 60 days after transplantation (ZY-X with 1654.49 ± 34.52 μg/g). The highest level of rutin was found in a Jiangchuan sample harvested at 60 days after transplantation (JC-X with 725.93 ± 40.70 μg/g), and the lowest rutin content was detected in a Zunyi tobacco sample harvested at 60 days after transplantation (ZY-X with 87.42 ± 2.78 μg/g). The developed method provided a convenient approach which might be applied for rapid maturity evaluation and tobacco flavor identification and also holds the potential for analysis of compounds present in other plants.

Analysis of mainstream tobacco smoke particulate phase using comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry

Comprehensive 2D GC coupled to time-of-flight mass spectrometry was applied for the characterization of the particulate phase of mainstream tobacco smoke particulate. Five 3R4F research cigarettes were smoked on a rotary smoking machine under standardized conditions, total particular matter was collected on Cambridge filter pads and extracted using methanol-based liquid extraction and dynamic headspace (DHS) approaches. Automated peak finding and mass spectral deconvolution combined with scripting and manual revision of library hits were used to evaluate the library search results. The revised peak table contained nearly 1800 individual compounds for the DHS sample and over 900 for the solvent extracted sample. These methods of extraction were shown to be complementary, leading to only 11% of repeated analytes, and their combination gave rise to a list of almost 2500 individual compounds.

Gas chromatography-mass spectrometric method for metabolic profiling of tobacco leaves

A gas chromatography-mass spectrometric method was developed for profiling of tobacco leaves. The differentiation among tobacco leaves planted in two different regions was investigated. Prior to analysis, the extraction solvent formulation was optimized and a combination of water, methanol and acetonitrile with a volume ratio of 3:1:1 was found to be optimal. The reproducibility of the method was satisfactory. Kendall tau-b rank correlation coefficients were equal to 1 (p<0.05) for 82% of the resolved peaks (up to 95% of the overall peak areas), indicating the good response correlation. Forty-four compounds including 9 saccharides, 9 alcohols, 9 amino acids, 16 organic acids and phosphoric acid were identified based on standard compounds. The method was successfully applied for profiling of tobacco leaves from Zimbabwe and Yunnan of China. Our result revealed that levels of saccharides and their derivatives including xylose, ribose, fructose, glucose, turanose, xylitol and glyceric acid were more abundant while sucrose, glucitol and D-gluconic acid were less abundant in tobacco leaves from Yunnan as compared to those from Zimbabwe. Amino acids such as L-alanine, L-tyrosine and L-threonine were found to be richer in Zimbabwe tobacco than in Yunnan tobacco.