Preparation of a polyacrylonitrile/multi-walled carbon nanotubes composite by surface-initiated atom transfer radical polymerization on a stainless steel wire for solid-phase microextraction

Aramid-wrapped CNT hybrid sol–gel sorbent for polycyclic aromatic hydrocarbons

This work describes the preparation of an analytical microextraction sorbent using a simple and versatile sol–gel hybrid composite, i.e., aramid oligomers wrapping multi-walled carbon nanotubes (CNTs) covalently bonded to a porous silica network.

A Perspective Review on the Application of Polyacrylonitrile-Based Supports for Laccase Immobilization

The use of laccases applied in bioremediation processes has been increasingly studied, given the urgent need to overcome the environmental problems caused by emerging contaminants. It is known that immobilized enzymes have better operational stability under reaction conditions, allowing for greater applicability. However, given the lack of commercially available immobilized laccases, the search for immobilization materials and methods continues to gain effort. The use of polyacrylonitrile (PAN) to immobilize enzymes has been investigated since it is a low-cost material and can be modified and functionalized to well interact with the enzyme. This polymer can be used with different morphologies such as fibers, beads, and core-shell, presenting as an easily applicable alternative. This review presents the missing link between polymer and enzyme through an overview of PAN's current use as support for laccase immobilization and polymer functionalization methods, considering the importance of immobilized laccases in several industrial sectors.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Development of a solid-phase microextraction fiber by the chemical binding of graphene oxide on a silver-coated stainless-steel wire with an ionic liquid as the crosslinking agent

Graphene oxide was bonded onto a silver-coated stainless-steel wire using an ionic liquid as the crosslinking agent by a layer-by-layer strategy. The novel solid-phase microextraction fiber was characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy and Raman microscopy. A multilayer graphene oxide layer was closely coated onto the supporting substrate. The thickness of the coating was about 4 μm. Coupled with gas chromatography, the fiber was evaluated using five polycyclic aromatic hydrocarbons (fluorene, anthracene, fluoranthene, 1,2-benzophenanthrene, and benzo(a)pyrene) as model analytes in direct-immersion mode. The main conditions (extraction time, extraction temperature, ionic strength, and desorption time) were optimized by a factor-by-factor optimization. The as-established method exhibited a wide linearity range (0.5-200 μg/L) and low limits of determination (0.05-0.10 μg/L). It was applied to analyze environmental water samples of rain and river water. Three kinds of the model analytes were quantified and the recoveries of samples spiked at 10 μg/L were in the range of 92.3-120 and 93.8-115%, respectively. The obtained results indicated the fiber was efficient for solid-phase microextraction analysis.

Graphene coating bonded onto stainless steel wire as a solid-phase microextraction fiber

A graphene coating bonded onto stainless steel wire was fabricated and investigated as a solid-phase microextraction fiber. The coating was characterized by scanning electron microscopy and energy-dispersive X-ray spectrometer. The coating with rough and crinkled structure was about 1 μm. These characteristics were helpful for promoting extraction. Using five n-alkanes (n-undecane, n-dodecane, n-tridecane, n-tetradecane and n-hexadecane) as analytes, the fiber was evaluated in direct-immersion mode by coupling with gas chromatography (GC). Through optimizing extraction and desorption conditions, a sensitive SPME-GC analytical method was established. SPME-GC method provided wide linearity range (0.2-150 μg L(-1)) and low limits of determination (0.05-0.5 μg L(-1)). It was applied to analyze rain water and a soil sample, and analytes were quantified in the range of 0.85-1.96 μg L(-1) and 0.09-3.34 μg g(-1), respectively. The recoveries of samples spiked at 10 μg L(-1) were in the range of 90.1-120% and 80.6-94.2%, respectively. The fiber also exhibited high thermal and chemical stability, due to the covalent bonds between graphene coating and wire, and the natural resistance of graphene for thermal, acid and basic conditions.

Environmental monitoring of complex hydrocarbon mixtures in water and soil samples after solid phase microextraction using PVC/MWCNTs nanocomposite fiber

A novel nanocomposite based on incorporation of multiwalled carbon nanotubes (MWCNTs) in polyvinyl chloride (PVC) was prepared. Proposed nanocomposite was coated on stainless steel wire by deep coating. Composition of nanocomposite was optimized based on results of morphological studies using scanning electron microscopy. The best composition (83% MWCNTs:17% PVC) was applied as a solid phase microextraction fiber. Complex mixture of aromatic (BTEX) and aliphatic hydrocarbons (C5-C34) were selected as model analytes, and performance of proposed fiber in extraction of the studied compounds from water and soil samples was evaluated. Analytical merits of the method for water samples (LODs=0.10-1.10 ng L(-1), r(2)=0.9940-0.9994) and for soil samples (LODs=0.10-0.77 ng kg(-1), r(2)=0.9946-0.9994) showed excellent characteristics of it in ultra trace determination of petroleum type environmental pollutants. Finally, the method was used for determination of target analytes in river water, industrial effluent and soil samples.

CNT-TiO2 coating bonded onto stainless steel wire as a novel solid-phase microextraction fiber

A novel solid-phase microextraction (SPME) fiber based on carbon nanotubes-titanium oxide (CNT-TiO2) composite coating bonded onto stainless steel wire was prepared via electroless plating and sol-gel techniques. The SPME coating was characterized by scanning electron microscopy and Raman microscopy. Coupled to gas chromatography (GC), the fiber was investigated with seven polycyclic aromatic hydrocarbons (PAHs) in direct-immersion mode. The SPME-GC analytical method was evaluated under optimized extraction conditions. Compared with other reports, higher sensitivity (LODs, 0.002-0.004 μg L(-1)) and better linear range (0.01-100 and 0.01-200 μg L(-1)) were obtained by the proposed method. The fiber exhibited high thermal stability to 300 °C and excellent durability in HCl and NaOH solutions. The as-established SPME-GC method was used to analyze the real water samples and satisfactory results were obtained.

ZnO nanorod array polydimethylsiloxane composite solid phase micro-extraction fiber coating: fabrication and extraction capability

ZnO nanorod array coating is a novel kind of solid-phase microextraction (SPME) fiber coating which shows good extraction capability due to the nanostructure. To prepare the composite coating is a good way to improve the extraction capability. In this paper, the ZnO nanorod array polydimethylsiloxane (PDMS) composite SPME fiber coating has been prepared and its extraction capability for volatile organic compounds (VOCs) has been studied by headspace sampling the typical volatile mixed standard solution of benzene, toluene, ethylbenzene and xylene (BTEX). Improved detection limit and good linear ranges have been achieved for this composite SPME fiber coating. Also, it is found that the composite SPME fiber coating shows good extraction selectivity to the VOCs with alkane radicals.