Evaluation of ionic liquid stationary phases for one dimensional gas chromatography–mass spectrometry and comprehensive two dimensional gas chromatographic analyses of fatty acids in marine biota

In-Column Dehydration Benzyl Alcohols and Their Chromatographic Behavior on Pyridinium-Based Ionic Liquids as Gas Stationary Phases

At present, stationary phases based on ionic liquids are a promising and widely used technique in gas chromatography, yet they remain poorly studied. Unfortunately, testing of "new" stationary phases is often carried out on a limited set of test compounds (about 10 compounds) of relatively simple structures. This study represents the first investigation into the physicochemical patterns of retention of substituted (including polysubstituted) aromatic alcohols on two stationary phases of different polarities: one based on pyridinium-based ionic liquids and the other on a standard polar phase. The retention order of the studied compounds on such stationary phases compared to the standard polar phase, polyethylene glycol (SH-Stabilwax), was compared and studied. It was shown that pyridinium-based ionic liquids stationary phase has a different selectivity compared to the SH-Stabilwax. Using a quantitative structure-retention relationships (QSRR) study, the differences in selectivity of the two stationary phases were interpreted. Using CHERESHNYA software, the importance of descriptors on different stationary phases was evaluated for the same data set. Different selectivity of the stationary phases correlates with different contributions of descriptors for the analytes under study. For the first time, we show that in-column dehydration is observed for some compounds (mostly substituted benzyl alcohols). This effect is worthy of further investigation and requires attention when analyzing complex mixtures. It suggests that when testing "new" stationary phases, it is necessary to conduct tests on a large set of different classes of compounds. This is because, in the case of using ionic liquids as an stationary phase, a reaction between the analyte and the stationary phase is possible.

Score Function for the Optimization of the Performance of Forward Fill/Flush Differential Flow Modulation for Comprehensive Two-Dimensional Gas Chromatography

Modulation is the key element of the comprehensive 2D gas chromatography separation. Forward fill/flush flow modulation is cost effective, robust and suitable for analysis of a wide range of samples. Even though this modulation system is well known, studies regarding its optimization are sparse. In this work, based on hundreds of experiments involving multiple column sets and modulation conditions, an approach was proposed that permits to facilitate the choice of the forward fill/flush flow modulation parameters. A score function was developed that allows to predict the forward fill/flush flow modulation process efficiency as judged by the modulated peak shape. The score function was based on the physical rules for optimized and quantitative forward fill/flush flow modulation proposed in our previous work, which state that the sum of the fill and flush modulation distances should be close to the modulation channel length and that the ratio of the flush and fill distances should be sufficiently high for efficient channel flushing. The score function was embedded in a freely available tool in the form of a forward fill/flush flow modulation calculator, which allows the user either to quickly check the relevancy of the modulation operating conditions or to obtain a suggestion for optimal modulation parameters.

Ionic liquids as stationary phases for fatty acid analysis by gas chromatography

The present paper provides an overview of the application of ionic liquid (IL) columns for GC analysis of fatty acid methyl esters (FAMEs).

Ionic liquids in chromatographic and electrophoretic techniques: toward additional improvements in the separation of natural compounds

Due to their unique properties, in recent years, ionic liquids (ILs) have been largely investigated in the field of analytical chemistry. Particularly during the last sixteen years, they have been successfully applied in the chromatographic and electrophoretic analysis of value-added compounds extracted from biomass. Considering the growing interest in the use of ILs in this field, this critical review provides a comprehensive overview on the improvements achieved using ILs as constituents of mobile or stationary phases in analytical techniques, namely in capillary electrophoresis and its different modes, in high performance liquid chromatography, and in gas chromatography, for the separation and analysis of natural compounds. The impact of the IL chemical structure and the influence of secondary parameters, such as the IL concentration, temperature, pH, voltage and analysis time (when applied), are also critically addressed regarding the achieved separation improvements. Major conclusions on the role of ILs in the separation mechanisms and the performance of these techniques in terms of efficiency, resolution and selectivity are provided. Based on a critical analysis of all published results, some target-oriented ILs are suggested. Finally, current drawbacks and future challenges in the field are highlighted. In particular, the design and use of more benign and effective ILs as well as the development of integrated (and thus more sustainable) extraction-separation processes using IL aqueous solutions are suggested within a green chemistry perspective.

An efficient and robust fatty acid profiling method for plasma metabolomic studies by gas chromatography-mass spectrometry

BACKGROUND

Targeted metabolomic analysis of fatty acids has linked the dysregulation of fatty acids to many diseases. This study selected five frequently used fatty acid derivatization methods for comparison.

METHODS

We compared the method precisions and derivatization efficiencies, the most economical and best performing method was subjected to method validation. Twenty-four fatty acid standards were used to validate the method, which was later applied to the investigation of potential fatty acid markers of breast cancer.

RESULTS

The acetyl chloride method was demonstrated to provide the best derivatization efficiency and lowest cost for plasma samples. The ionic liquid column successfully separated positional and geometric fatty acid isomers within 26 min under the optimized conditions. Intra-day and inter-day CVs for most of the fatty acids were <10%. Over 90% of the results showed recoveries within 85%-115%. The validated method was applied to investigate potential fatty acid markers of breast cancer. The fatty acid profiling results revealed that 3 fatty acids (C22:0, C24:0, C18:2n6) were significantly lower in both pre- and post-menopausal breast cancer patients (P<0.05).

CONCLUSIONS

We demonstrated that the proposed method is an accurate, efficient and economical method for plasma metabolomic studies of fatty acids.

Chromatographic Methods in the Separation of Long-Chain Mono- and Polyunsaturated Fatty Acids

This review presents various chromatographic systems, TLC, HPLC, GC, and also SFC, developed for identification and accurate quantification of long-chain mono- and polyunsaturated fatty acids from different samples with emphasis on selected literature which was published during last decade. Almost all the aspects such as preseparation step of fatty acids (cisandtrans), stationary phase, solvent system, and detection mode are discussed.

Ionic liquids as stationary phases in gas chromatography: determination of chlorobenzenes in soils

The present research focuses on the evaluation of different ionic liquid (IL) stationary phases in gas chromatography. The different IL columns were evaluated in terms of peak resolution (Rs) and peak symmetry for the separation of the chlorobenzenes. The determination of chlorobenzenes in soil samples by means of the optimal IL stationary phase (SLB-IL82) is proposed as an application. Soil pretreatment was based on a simplified quick, easy, cheap, effective, rugged, and safe extraction procedure and a large injection volume via a programed temperature vaporizer working in solvent vent mode. The retention time of the chlorobenzenes increased as the polarity of the IL column decreased. SLB-IL82 is the stationary phase that provides the best values as regards Rs and asymmetry factor. Soil sample blanks were spiked with the analytes before subjecting the sample to the extraction process. The existence of a matrix effect was checked and the analytical characteristics of the method were determined in a fortified garden soil sample. The method provided good linearity, good repeatability and reproducibility values, and the LODs were in the 0.1-4.7 μg/kg range. Two fortified soil samples were applied to validate the proposed methodology.

Modeling toxic stress by atrazine in a marine consumer-resource system

The present study combines short-term experiments with food chain modeling to explore the long-term effects of the herbicide atrazine on consumer-resource dynamics in a marine intertidal ecosystem. Short-term (28 d) lab experiments indicated that the intrinsic rate of increase (r) and carrying capacity (K) of the marine diatom Seminavis robusta decreased with increasing atrazine exposure. This decrease did not show the concave shape expected from the lifetime productivity for nonexposed diatoms and from single-species toxicity data in the literature but instead was described best by a linear model. These experimentally observed atrazine-induced decreases of r and K were used to parameterize a Rosenzweig-MacArthur model representing a simple food chain including the tested diatom and its grazer, the harpacticoid copepod Delavalia palustris var. palustris. Stable oscillation zoo-phytobenthos systems were produced at diatom exposures of 0, 100, and 150 µg/L atrazine. An atrazine concentration of 150 µg/L contributed to a 15% increase of the oscillation periods of both diatoms and copepods as well as a 52% reduction of oscillation amplitudes compared with the control situation. Although the amplitudes of copepods increased only 7% at 150 µg/L atrazine, the maximum and minimum copepod densities at that concentration were reduced 61 and 63%, respectively. The effects of atrazine on periodicity and amplitudes were robust to 20% changes in the food-chain model parameters that represented allometric relationships. The simulations in the present study suggest food chain-mediated indirect effects on zoobenthos populations, indicating a reduced diatom and copepod availability throughout the year.

Development of gas chromatography analysis of fatty acids in marine organisms

The gas chromatographic analysis of fatty acids has attracted considerable interest. In this analysis, the common derivatives of fatty acids, such as fatty acid methyl esters, can be detected using a flame ionization detector and the mass spectra can indicate the true structure of fatty acids. This paper reviews gas chromatographic methods for obtaining fatty acids from marine organisms. The stationary phase and detector for applications in gas chromatography are discussed. This article also reviews the components of fatty acids in marine animals, marine plants and marine microorganisms.

Mass spectrometry-based metabolomics to elucidate functions in marine organisms and ecosystems

Marine systems are very diverse and recognized as being sources of a wide range of biomolecules. This review provides an overview of metabolite profiling based on mass spectrometry (MS) approaches in marine organisms and their environments, focusing on recent advances in the field. We also point out some of the technical challenges that need to be overcome in order to increase applications of metabolomics in marine systems, including extraction of chemical compounds from different matrices and data management. Metabolites being important links between genotype and phenotype, we describe added value provided by integration of data from metabolite profiling with other layers of omics, as well as their importance for the development of systems biology approaches in marine systems to study several biological processes, and to analyze interactions between organisms within communities. The growing importance of MS-based metabolomics in chemical ecology studies in marine ecosystems is also illustrated.

A flow-modulated comprehensive gas chromatography-mass spectrometry method for the analysis of fatty acid profiles in marine and biological samples

The present investigation is focused on the development of a flow-modulator (FM) comprehensive 2D GC (GC×GC)-quadrupole mass spectrometry (qMS) approach, for the analysis of fatty acids. A recently developed flow modulator interfaced an apolar-polar column set, and was used for the first time with a mass spectrometer. Method development was achieved by using a standard mixture, containing fatty acid methyl esters (FAMEs). The total run time was approx. 40 min, thus relatively rapid. The optimized FM GC×GC-qMS method was applied to marine and biological FAMEs. Validation parameters such as intra-day and inter-day repeatability, limits of identification (mass spectral quality was evaluated at various FAME concentrations), and quantification were measured. Peak assignment was performed using pure standard compounds (when available), linear retention indices (LRIs), a dedicated FAME MS database, and specific bidimensional chromatogram positions. The MS database contained one-dimensional LRI information, exploited as a filter during the MS database search procedure. A good agreement was observed between database LRI values, and those calculated on the twin-column set. The FM GC×GC-qMS method can be considered as a valid counterpart, with respect to cryogenically modulated GC×GC, in the fatty acid field of research.

Recent advances in flow-controlled multidimensional gas chromatography

The continued development of flow-controlled two-dimensional gas chromatography (2-D GC) is reviewed, with a special emphasis on results published from 2001 through 2011. Heart-cutting 2-D GC continues to be used for isolating selected components in complex mixtures. The programmable and highly precise flows and temperatures produced by modern gas chromatographs have made it easier to selectively transfer analytes to the secondary column and to backflush unwanted components from the primary column. Several new Deans switch interfaces for performing heart-cutting 2-D GC have been introduced, with most attention given to devices that integrate the flow connections into a single unit. Heart-cutting 2-D GC has been used to isolate analytes in a wide variety of complex mixtures including fuels, industrial feedstocks, fragrances, and environmental extracts. Valve-based comprehensive 2-D GC (GC×GC) was also actively developed in the past decade. Valve-based modulation is a simple way to generate GC×GC separations without using cryogenic fluids. More than ten new valve-based modulators were introduced. Diaphragm valves fitted with sample loops are the most common low duty cycle modulators, whereas fluidic modulators that employ differential flow conditions are the most common high duty cycle modulators. Applications of valve-based GC×GC include analysis of hydrocarbon mixtures, essential oils, and environmental samples.

Ionic liquid-modified materials for solid-phase extraction and separation: a review

In recent years, materials science has propelled to the research forefront. Ionic liquids with unique and fascinating properties have also left their footprints to the developments of materials science during the last years. In this review we highlight some of their recent advances and provide an overview at the current status of ionic liquid-modified materials applied in solid-phase extraction, liquid and gas chromatography and capillary electrochromatography with reference to recent applications. In addition, the potential of ionic liquids in the modification of capillary inner wall in capillary electrophoresis is demonstrated. The main target material modified with ionic liquids is silica, but polymers and monoliths have recently joined the studies. Although imidazolium is still clearly the most commonly used ionic liquid for the covalently modification of materials, the exploitation of pyridinium and phosphonium will most probably increase in the future.