Ionic liquid-based homogeneous liquid-liquid microextraction for the determination of antibiotics in milk by high-performance liquid chromatography

Natural deep eutectic solvent-based hollow polymer inclusion membrane doped with TiO2 nanoparticles: A new design of polymer inclusion membrane for on-chip electromembrane extraction of fluoroquinolones from food samples prior to liquid chromatography tandem mass analysis

A new design of polymer inclusion membrane has been proposed with the aim of addressing issues with using common forms of liquid membranes. To do so, a natural deep eutectic solvent (NADES) was employed as an extractant in the structure of the hollow polymer inclusion membrane (HPIM). Besides polyvinyl chloride (PVC) as a base polymer, titanium dioxide nanoparticles (TiO2) as well as polyethylene glycol polymer (PEG) were incorporated into the HPIM structure to achieve a nanocomposite form with a desirable hydrophilicity. The optimal HPIM was composed of 12.5 v/w% of thymol-coumarin NADES, 3.0 w/w% of TiO2 and 40.0 v/w% of PEG based on PVC content. Aiming to compare the applicability, HPIMs with other types of extractants, such as bis(2-ethylhexyl) phthalate (DEHP), and the mixture of DEHP-NADES were also fabricated. To confirm the successful fabrication of the HPIM, containing the aforementioned extractant doped with TiO2 nanoparticles various characterization techniques were employed. The resultant HPIM was employed as a liquid membrane in an on-chip electromembrane extraction (EME) of fluoroquinolones (FQs) from various samples, followed by LC-MS/MS analysis. The parameters influencing extraction performance were analyzed, and the proposed method was validated under ideal conditions. All the samples provided excellent performance concerning limits of detection (0.01-0.08 ng mL-1), and quantification (0.03-0.25 ng mL-1) together with an excellent linearity (R2 ≥ 0.9978). The method indicates the desirable RSDs% in the range of 3.2-7.0 % (intra-day, n = 3 × 3) and 3.8-6.1 % (inter-day, n = 3 × 3) for three spiked levels. The satisfactory relative recoveries fell within the 92.0-115.0 % range.

In situ formation of solidified supramolecular solvent based dispersive liquid-liquid microextraction for the enrichment of phenylurea herbicides in water, fruit juice, and milk

A convenient, efficient, and green dispersive liquid-liquid microextraction based on the in situ formation of solidified supramolecular solvents combined with high performance liquid chromatography was developed for the determination of four phenylurea herbicides in liquid samples, including monuron, monolinuron, isoproturon, and chlortoluron. Herein, a novel supramolecular solvent was prepared by the in situ reaction of [P4448]Br and NH4PF6, which had the advantages of low melting point, high density, and good dispersibility. In addition, the microscopic morphology and physical properties of supramolecular solvent were characterized, and the extraction conditions were optimized. The results showed that the analytes had good linearity (R2 > 0.9998) within the linear range. The limits of detection and quantification for the four phenylurea herbicides were in the range of 0.13-0.19 μg L-1 and 0.45-0.65 μg L-1, respectively. The prepared supramolecular solvent is suitable for the efficient extraction of phenylurea herbicides in water, fruit juice, and milk.

A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater

Frequent detection of sulfonamides (SAs) pharmaceuticals in wastewater has necessitated the discovery of suitable technology for their sustainable remediation. Adsorption has been widely investigated due to its effectiveness, simplicity, and availability of various adsorbent materials from natural and artificial sources. This review highlighted the potentials of carbon-based adsorbents derived from agricultural wastes such as lignocellulose, biochar, activated carbon, carbon nanotubes graphene materials as well as organic polymers such as chitosan, molecularly imprinted polymers, metal, and covalent frameworks for SAs removal from wastewater. The promising features of these materials including higher porosity, rich carbon-content, robustness, good stability as well as ease of modification have been emphasized. Thus, the materials have demonstrated excellent performance towards the SAs removal, attributed to their porous nature that provided sufficient active sites for the adsorption of SAs molecules. The modification of physico-chemical features of the materials have been discussed as efficient means for enhancing their adsorption and reusable performance. The article also proposed various interactive mechanisms for the SAs adsorption. Lastly, the prospects and challenges have been highlighted to expand the knowledge gap on the application of the materials for the sustainable removal of the SAs.

Liquid Phase Microextraction of Hazardous Compounds in Dairy Products; Principal and Practical Aspects

Liquid phase microextraction techniques are considered as the miniaturized version of traditional liquid-liquid extraction, which use only several microliters of a proper solvent to extract the analytes from sample. In these methods, the target analytes are migrated into a water-immiscible organic solvent (acceptor phase) from an aqueous sample (donor phase). They are mainly classified into three main groups including (a) single-drop microextraction, (b) dispersive liquid-liquid microextraction, and (c) hollow fiber-liquid phase microextraction. These techniques have been successfully applied to the assessment of different analytes in food samples, pharmaceuticals, beverages, and so on. This review mainly focuses on up-to-date information on the application of liquid phase microextraction techniques in dairy products. The advantages and disadvantages of the developed liquid phase microextraction methods were discussed.

Ionic Liquid-Dispersive Micro-Extraction and Detection by High Performance Liquid Chromatography-Mass Spectrometry for Antifouling Biocides in Water

A simple analytical method was developed and evaluated for the determination of two antifouling biocides using an ionic liquid-dispersive liquid-liquid micro-extraction (IL-DLLME) and a high-performance liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) analysis. Irgarol 1051 and Sea-Nine 211 were extracted from deionized water, lake water, and seawater using IL 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIm][PF6]) and ethyl acetate as the extraction solvent and the dispersion solvent. Several factors were considered, including the type and volume of extraction and dispersive solvent, IL amount, sample pH, salt effect, and cooling temperature. The developed method resulted in a recovery range of 78.7-90.3%, with a relative standard deviation (RSD, n = 3) less than 7.5%. The analytes were enriched greater than 40-fold, and the limits of detection (LOD) for two antifouling biocides were 0.01-0.1 μg L^-1. The method was effectively applied for the analysis of real samples of freshwater as well as samples of seawater.

A magnetic ionic liquid based vortex-assisted dispersive liquid-liquid microextraction coupled with back-extraction for the enrichment of fluoroquinolone antibiotics

In the present work, a magnetic ionic liquid (MIL) ([Co(DMBG)₂][Co(hfaca)₃]) was designed and synthesized with both the cation and anion respectively containing a paramagnetic component. With the prepared MIL as the extraction solvent, a vortex-assisted dispersive liquid-liquid microextraction (VA-DLLME) method was developed and combined with back-extraction for the enrichment of five fluoroquinolone antibiotics (FQs). The MIL can be easily collected and separated from the aqueous phase under an external magnetic field due to the strong magnetic susceptibility and red color. Some experimental factors affecting the extraction efficiency were investigated, and the optimum extraction efficiency was obtained in a basic solution (pH=9) for the extraction process and with 2% (v/v) formic acid as the back-extraction solvent. Under the optimized extraction and back-extraction conditions, the proposed method was validated and exhibited good linearity with coefficients of determination (R²) above 0.9956 in the range of 2.5-800 ng·mL^-1 and 5.0-800 ng·mL^-1, low limits of detection (LODs) within 0.75-1.5 ng·mL^-1 and satisfactory intra-day and inter-day precisions with relative standard deviations (RSDs) respectively less than 10.6% and 8.6%. Finally, the method was applied for the determination of five FQs in four samples of tap water, milk, honey and chicken, and good precision with RSDs of 0.5-9.5% and acceptable recoveries (73.8-114.3%) were obtained.

Multiplex Detection of Antibiotic Residues in Milk: Application of MCR-ALS on Excitation-Emission Matrix Fluorescence (EEMF) Data Sets

The presence of antibiotics and their metabolites in milk and dairy products is a serious concern because of their harmful effects on human health. In the current study, a novel synergistic bimetallic nanocluster with gold and silver as an emission fluorescence probe was investigated for the simultaneous determination of tetracycline (TC), ampicillin (AMP), and sulfacetamide (SAC) antibiotics in the milk samples using excitation-emission matrix fluorescence (EEMF) spectroscopy. The multivariate curve resolution-alternating least squares (MCR-ALS) method was implemented to analyze augmented EEMF data sets to quantify the multicomponent systems in the presence of interferences with considerable spectral overlap. A pseudo-univariate calibration curve of the resolved emission spectra intensity against the concentration of the mentioned antibiotics was linear in the range of 5-5000 ng mL^-1 for AMP and 50-5000 ng mL^-1 for TC and SAC. The calculated values of the limit of detection ranged between 1.4 and 14.6 ng mL^-1 with a relative standard deviation (RSD) of less than 4.9%. The obtained results show that the EEMF/MCR-ALS methodology using an emission fluorescence probe is a powerful tool for the simultaneous quantification of TC, AMP, and SAC in complex matrices with highly overlapped spectra.

Ultrasound-assisted switchable hydrophilic solvent-based homogeneous liquid-liquid microextraction for the determination of triazole fungicides in environmental water by GC-MS

A new method was developed for the determination of three triazole fungicides in environmental water samples by gas chromatography-mass spectrometry (GC-MS) based on ultrasonic assisted switchable hydrophilic solvent homogeneous liquid-liquid microextraction. As a switchable hydrophilic solvent, N,N-dimethylcyclohexylamine (DMCHA) does not require a dispersant or centrifugation. Ultrasound assistance is helpful to speed up the extraction of target compounds and can reduce the pretreatment time. The entire pretreatment process of this method only takes 5 minutes. Using the Box-Behnken design as the means of optimization, optimal extraction conditions were obtained through a mathematical model. Good linearity was obtained in the range of 5-500 μg L^-1, and the correlation coefficient of target compounds was greater than 0.999. The matrix spiked recoveries were between 81.3% and 111.1% and the detection limit was between 0.46 and 0.99 μg L^-1. Intraday relative standard deviation (n = 3) was 13.0-13.9% at 100 μg L^-1. Finally, it was concluded that the method is a rapid, efficient and simple method for the analysis of triazole fungicides in water.

Ionic liquid-based dispersive liquid-liquid microextraction followed by magnetic solid-phase extraction for determination of quinolones

An ionic liquid-based dispersive liquid-liquid microextraction (IL-DLLME) combined with magnetic solid-phase extraction (MSPE) was developed for extraction of quinolones (quinolones) from honey and milk prior to high-performance liquid chromatography (HPLC) analysis. 1-Butyl-3-methylimidazolium hexafluorophosphate was used as the extraction solvent and an effective adsorbent based on chitosan modified magnetic core-shell functionalized multi-walled carbon nanotube (MWCNTs-Fe₃O₄@SiO₂-CS) nanoparticles was used to assist IL to adsorb quinolone residues in honey and milk samples. Extraction conditions were optimized through one-factor-at-a-time and response surface methodology using a Box-Behnken design. Under optimum conditions satisfactory linearity (R² > 0.999) and high sensitivity (method limits of quantification were 4-8 μg kg^-1 or μg L^-1 in honey or milk samples) was achieved. The recoveries of quinolones in honey and milk ranged from 81.2 to 109%. Based on this study, the proposed method was employed for the determination of antibiotic residues in honey and milk samples.

Detection and quantification of multiclass antibiotic residues in poultry products using solid-phase extraction and high-performance liquid chromatography with diode array detection

This article describes the initial study on the simultaneous determination of multiclass antibiotic residues in imported and local frozen poultry specimens, including turkey gizzard and muscle tissues, and chicken muscle tissues, commonly consumed in Ogun State, Nigeria. Minced tissues were treated with phosphate buffer adjusted to pH 7 that was cleaned using C18 SPE-column (Supelclean™) cartridge. For the determination of six antibiotic residues including fluoroquinolones, sulfonamides, and macrolides, a solid-phase extraction method was used, followed by extract analysis using high-performance liquid chromatography-diode array detection (HPLC-DAD). The coefficient of determination (R2) for the external standards for all the analytes ranged between 0.963 and 0.999. The limit of detection (LOD) and quantification (LOQ) ranged between 5.37 - 55.4 μg/kg, and 17.9-185 μg/kg, respectively. Enrofloxacin, sulfadimethoxine, sulfamerazine, and tylosin showed high concentration levels in the frozen poultry beyond acceptable maximum residue limits (MRLs). The six drugs considered in this study were present at higher concentrations in domestic chicken tissues than the permissible level. This suggests that farmers do not observe the cessation period before poultry birds previously treated with antibiotics are sold to consumers thus exposing them to potentially hazardous antibiotic residues.

Homogeneous liquid-liquid extraction as an alternative sample preparation technique for biomedical analysis

Liquid-liquid extraction is a widely used technique of sample preparation in biomedical analysis. In spite of the high pre-concentration capacities of liquid-liquid extraction, it suffers from a number of limitations including time and effort consumption, large organic solvent utilization, and poor performance in highly polar analytes. Homogeneous liquid-liquid extraction is an alternative sample preparation technique that overcomes some drawbacks of conventional liquid-liquid extraction, and allows employing greener organic solvents in sample treatment. In homogeneous liquid-liquid extraction, a homogeneous phase is formed between the aqueous sample and the water-miscible extractant, followed by chemically or physically induced phase separation. To form the homogeneous phase, aqueous samples are mixed with water-miscible organic solvents, water-immiscible solvents/cosolvents, surfactants, or smart polymers. Then, phase separation is induced chemically (adding salt, sugar, or buffer) or physically (changing temperature or pH). This mode is rapid, sustainable, and cost-effective in comparison with other sample preparation techniques. Moreover, homogeneous liquid-liquid extraction is more suitable for the extraction of delicate macromolecules such as enzymes, hormones, and proteins and it is more compatible with liquid chromatography with tandem mass spectrometry, which is a vital technique in metabolomics and proteomics. In this review, the principle, types, applications, automation, and technical aspects of homogeneous liquid-liquid extraction are discussed.

Aqueous Two-Phase Systems and Microfluidics for Microscale Assays and Analytical Measurements

Phase separation is a common occurrence in nature. Synthetic and natural polymers, salts, ionic liquids, surfactants, and biomacromolecules phase separate in water, resulting in an aqueous two-phase system (ATPS). This review discusses the properties, handling, and uses of ATPSs. These systems have been used for protein, nucleic acid, virus, and cell purification and have in recent years found new uses for small organics, polysaccharides, extracellular vesicles, and biopharmaceuticals. Analytical biochemistry applications such as quantifying protein-protein binding, probing for conformational changes, or monitoring enzyme activity have been performed with ATPSs. Not only are ATPSs biocompatible, they also retain their properties at the microscale, enabling miniaturization experiments such as droplet microfluidics, bacterial quorum sensing, multiplexed and point-of-care immunoassays, and cell patterning. ATPSs include coacervates and may find wider interest in the context of intracellular phase separation and origin of life. Recent advances in fundamental understanding and in commercial application are also considered.

Determination of Six Tetracyclines in Eggs and Chicken by Dispersive Liquid-Liquid Microextraction Combined with High-Performance Liquid Chromatography

BACKGROUND

The wide livestock usage of tetracyclines may result in drug residues in foods. Therefore, it is necessary to develop reliable methods for the determination of tetracyclines in foods.

OBJECTIVE

A dispersive liquid-liquid microextraction (DLLME) combined with high-performance liquid chromatography (HPLC) method was developed for the analysis of six tetracyclines in eggs and chicken.

METHODS

After deproteinization, tetracyclines in acidic solutions were concentrated by vortex-assisted DLLME. Followed by the addition of NaCl (35% for eggs and 20% for chicken), a mixture of ionic liquid [Bmim]PF6 and ethyl acetate (300 μL-50 μL for eggs and 200 μL-60 μL for chicken) was used as the extractant. After centrifugation, the extract was collected for HPLC analysis.

RESULTS

The developed method showed good linear relationship (10.0-500 μg/kg), low method detection limits (0.219-1.42 μg/kg) and quantification limits (0.731-4.72 μg/kg), satisfactory relative recoveries (87.1-104%) with intra-day and inter-day RSDs in the ranges of 0.853-8.62% and 1.65-11.8%, respectively. The established method was successfully applied for the determination of six tetracyclines in eggs and chicken of different parts. The contents of tetracyclines in all samples were lower than their maximum residue limits.

CONCLUSIONS

A DLLME-HPLC method has been developed for the analysis of six tetracyclines in animal derived foods using ionic liquid and ethyl acetate as the extractant.

HIGHLIGHTS

The developed method is simple, sensitive, cost-effective and has strong anti-interference ability. This method has been successfully applied to the analysis of six tetracyclines in eggs and chicken.

Use of a magnetic covalent organic framework material with a large specific surface area as an effective adsorbent for the extraction and determination of six fluoroquinolone antibiotics by HPLC in milk sample

A magnetic covalent organic framework material was synthesized with a core-shell structure using a simple solvothermal method. It was prepared with Fe₃ O₄ as the magnetic core, covalent organic framework as the shell, which synthesized from 1,3,5-triformylphloroglucinol and p-phenylenediamine by Schiff base reaction. Transmission electron microscopy, Fourier transform infrared spectroscopy, powder X-ray diffraction, vibrating sample magnetometry, and nitrogen adsorption-desorption were used to characterize magnetic adsorbent. It has showed a large specific surface area (505.6 m² /g), which can provide many adsorption sites. Moreover, the saturation magnetization value was 48.4 emu/g enough to be separated by external magnet. Six kinds of fluoroquinolones (enoxacin, fleroxacin, ofloxacin, norfloxacin, pefloxacin, and lomefloxacin) were extracted by magnetic solid phase extraction with the magnetic adsorbent. High-performance liquid chromatography detects the entire adsorption and desorption process to further evaluate the optimal extraction and desorption conditions. Under the optimal chromatographic conditions, this method showed a low detection limit (0.05 to 0.20 μg/L), good linearity in the range of 0.5 to 200 μg/L, and the enrichment factor reaches 115.5-127.3. The spiked recovery of the fluoroquinolones in milk sample ranged from 90.4 to 101.2%.

Collection and Separation of Fleroxacin and Ciprofloxacin in Ultrasound-Assisted Ionic Liquid Salting-Out Microextraction System

An ultrasound-assisted ionic liquid (IL) salting-out microextraction system was developed and applied for the extraction of quinolone antibiotics from urine. A precipitate was formed from the salt and IL, and it acted as the sorbent for the analytes. The precipitate containing the analyte was separated by filtration, redissolved, and the solution then was evaporated. The resulting extract was redissolved for high-performance liquid chromatographic analysis. Several parameters, including type and volume of IL, the type and amount of salts, sample pH, temperature and extraction time were optimized. Under the optimal experimental conditions, the limits of detection for fleroxacin and ciprofloxacin were 3.12 and 4.97 μg L-1, respectively. When the present method was applied to real urine sample analysis, the analyte recoveries ranged from 82.3 to 106.8%. This ultrasound-assisted IL salting-out microextraction system had the characteristics of high recoveries, shorter separation time and easy-to-perform collection procedure, which yielded the method to have potential for wide application.

Immobilized imidazolium-based ionic liquids in C18 for solid-phase extraction

In this work, two solid-phases based on imidazolium-based ionic liquids were obtained and characterized for solid-phase extraction of fluoroquinolones. The process of immobilization was performed replacing a toxic reagent by UV-irradiation to get a harmless process. The obtained solid-phases were characterized by nuclear magnetic resonance spectroscopy and elemental analysis. Each solid-phase was packed in a cartridge and was used in solid-phase extraction processes for norfloxacin and ciprofloxacin, after the optimization of some parameters such as the elution solvent, the eluent volume and, the sample volume to be used during the loading step. The developed solid-phases with immobilized ionic liquids were successfully implemented for the studied compounds and indicate high probabilities to be useful in solid-phase extractions of other fluoroquinolones.

Direct and indirect photolysis of the antibiotic enoxacin: kinetics of oxidation by reactive photo-induced species and simulations

The purpose of this study was to investigate the aqueous phase photochemical behavior of enoxacin (ENO), an antibiotic selected as a model pollutant of emerging concern. The second-order reaction rate constants of ENO with hydroxyl radicals (HO^●) and singlet oxygen (¹O₂) were determined at pH 3, 7, and 9. Also, the rate constants of the electron transfer reaction between ENO and triplet states of chromophoric dissolved organic matter (³CDOM*) are reported for the first time, based on anthraquinone-2-sulfonate (AQ2S) as CDOM proxy. The sunlight-driven direct and indirect ENO degradation in the presence of dissolved organic matter (DOM) is also discussed. The results show that direct photolysis, which occurs more rapidly at higher pH, along with the reactions with HO^● and ³AQ2S*, is the key pathway involved in ENO degradation. The ENO zwitterions, prevailing at pH 7, show k_ENO, HO^●, k_ENO,1O2, and k_ENO,3AQ2S* of (14.0 ± 0.8) × 10¹⁰, (3.9 ± 0.2) × 10⁶, and (61.5 ± 0.7) × 10⁸ L mol^-1 s^-1, respectively, whose differences at pH 3, 7, and 9 are due to ENO pH-dependent speciation and reactivity. These k values, along with the experimental ENO photolysis quantum yield, were used in mathematical simulations for predicting ENO persistence in sunlit natural waters. According to the simulations, dissolved organic matter and water depth are expected to have the highest impacts on ENO half-life, varying from a few hours to days in summertime, depending on the concentrations of relevant waterborne species (organic matter, NO₃^-, NO₂^-, HCO₃^-).

Recent advances in green reagents for molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are tailor-made materials with special binding sites.

Ionic-Liquid-Mediated Extraction and Separation Processes for Bioactive Compounds: Past, Present, and Future Trends

Ionic liquids (ILs) have been proposed as promising media for the extraction and separation of bioactive compounds from the most diverse origins. This critical review offers a compilation on the main results achieved by the use of ionic-liquid-based processes in the extraction and separation/purification of a large range of bioactive compounds (including small organic extractable compounds from biomass, lipids, and other hydrophobic compounds, proteins, amino acids, nucleic acids, and pharmaceuticals). ILs have been studied as solvents, cosolvents, cosurfactants, electrolytes, and adjuvants, as well as used in the creation of IL-supported materials for separation purposes. The IL-based processes hitherto reported, such as IL-based solid-liquid extractions, IL-based liquid-liquid extractions, IL-modified materials, and IL-based crystallization approaches, are here reviewed and compared in terms of extraction and separation performance. The key accomplishments and future challenges to the field are discussed, with particular emphasis on the major lacunas found within the IL community dedicated to separation processes and by suggesting some steps to overcome the current limitations.

Development of a novel naphthoic acid ionic liquid and its application in "no-organic solvent microextraction" for determination of triclosan and methyltriclosan in human fluids and the method optimization by central composite design

In traditional ionic liquids (ILs)-based microextraction, the hydrophobic and hydrophilic ILs are often used as extractant and disperser, respectively. However, the functional effects of ILs are not utilized in microextraction procedures. Herein, we introduced 1-naphthoic acid into imidazolium ring to synthesize a novel ionic liquid 1-butyl-3-methylimidazolium naphthoic acid salt ([C4MIM][NPA]), and its structure was characterized by IR, (1)H NMR and MS. On the basis of its acidic property and lower solubility than common [CnMIM][BF4], it was used as a mixing dispersive solvent with [C4MIM][BF4] in "functionalized ionic liquid-based no organic solvent microextraction (FIL-NOSM)". Utilization of [C4MIM][NPA] in FIL-NOSM procedures has two obvious advantages: (1) it promoted the non-polar environment, increased volume of the sedimented phase, and thus could enhance the extraction recoveries of triclosan (TCS) and methyltriclosan (MTCS) by more than 10%; and (2) because of the acidic property, it can act as a pH modifier, avoiding extra pH adjustment step. By combining single factor optimization and central composite design, the main factors in the FIL-NOSM method were optimized. Under the optimal conditions, the relative recoveries of TCS and MTCS reached up to 98.60-106.09%, and the LODs of them were as low as 0.12-0.15µgL(-1) in plasma and urine samples. In total, this [C4MIM][NPA]-based FIL-NOSM method provided high extraction efficiency, and required less pretreatment time and unutilized any organic solvent. To the best of our knowledge, this is the first application of [C4mim][NPA]-based microextraction method for the simultaneous quantification of trace TCS and MTCS in human fluids.

Recent advances in sample preparation techniques and methods of sulfonamides detection - A review

Sulfonamides (SAs) have been the most widely used antimicrobial drugs for more than 70 years, and their residues in foodstuffs and environmental samples pose serious health hazards. For this reason, sensitive and specific methods for the quantification of these compounds in numerous matrices have been developed. This review intends to provide an updated overview of the recent trends over the past five years in sample preparation techniques and methods for detecting SAs. Examples of the sample preparation techniques, including liquid-liquid and solid-phase extraction, dispersive liquid-liquid microextraction and QuEChERS, are given. Different methods of detecting the SAs present in food and feed and in environmental, pharmaceutical and biological samples are discussed.