The use of ammonium hydroxide as an additive in supercritical fluid chromatography for achiral and chiral separations and purifications of small, basic medicinal molecules

Analytical and preparative chiral supercritical fluid chromatography resolutions using crown ether-derived column

In this study, crown ether-derived column Crownpak® CR-I (+) was evaluated under SFC conditions using 12 primary amines, and the chromatographic results were compared against eight immobilized polysaccharide-based columns. Crownpak® CR-I (+) achieved a significantly higher success rate. It was found that the addition of 5% water to the modifier dramatically improved the peak shape for chiral separation of primary amines on Crownpak® CR-I (+). The first reported preparative SFC separations on Crownpak® CR-I (+) are shown, offering a new approach for the preparative resolution of primary amines. The case studies demonstrate that Crownpak® CR-I (+) is a very useful column in the chiral separation of challenging compounds that contain a primary amine group in the pharmaceutical industry.

Controlling the positive ion electrospray ionization of poly(ethylene glycols) when using ultra-high-performance supercritical fluid chromatography-mass spectrometry

Poly(ethylene glycols) are complex polymers often added to pharmaceutical formulations to improve drug solubility and delivery. One of the main challenges when using chromatographic techniques coupled to mass spectrometry is the unselective ionization of poly(ethylene glycols) oligomers. Additionally, when the chain length is large enough, multiple charged species are formed, further complicating the mass spectra and processing. This study uses the advanced oligomer separation provided by supercritical fluid chromatography with a mass spectrometry approach that selectively ionizes poly(ethylene glycols) as ammoniated molecules to simplify data analysis and facilitate batch-to-batch comparisons. Several visual representations of the response of the ionization events based on the polymer molecular weight and the repeating unit were used to elucidate trends in ionization. Evaluation of the influence of the oligomer length and end-group on the electrospray ionization of the polymer allowed the development of a process to enable selective ionization for these complex polymers.

Supercritical fluid chromatography based on reversed-phase/ ion chromatography mixed-mode stationary phase for separation of spirooxindole alkaloids

The present paper illustrates the versatility of the supercritical fluid chromatography (SFC) since, for the first time, four spirooxindole alkaloids (SOAs) including two pairs of isomers were separated by using two types of reversed-phase/ ion chromatography (RP/IC) mixed-mode stationary phases. Two mixed-mode stationary phases (C8SAX and C8SCX) was simultaneously provided dispersive and electrostatic interactions, which were suitable for the separation of such alkaloids. This study tried to provide an in-depth understanding of the SFC separation mechanism of the mixed-mode stationary phase through investigation of the impact of changes in mobile phase composition on alkaloids' retention behavior. On C8SAX, due to the strong electrostatic repulsion, there was a very narrow elution window of the alkaloids, of which behaviors were hardly affected by adding diethylamine in mobile phase. When adding formic acid or acidic ammonium formate, the prolonged retention time of alkaloids was presented because of the shielded effect of formate anions on the electrostatic repulsion. In particular, better peak shape and improved resolution were obtained by using acidic ammonium formate due to the deactivation of silanol groups by ammonium cations. On the other hand, both formic acid and acidic ammonium formate can strengthen the electrostatic attraction of C8SCX, causing difficult elution of the alkaloids. Ammonium cations from either the protonated diethylamine or the ionized ammonium formate, were considered as counter ions to effectively mask the electrostatic attraction of C8SCX, to significantly reduce the retention of alkaloids, but improve the resolution. Finally, utilizing two developed SFC methods, i.e., C8SAX with EtOH+ 10 mM acidic ammonium formate in CO2, or C8SCX with EtOH+0.1% diethylamine in CO2, the baseline separation of corynoxeine and isocorynoxeine, rhynchophylline and isorhynchophylline was achieved within 5 min.

Optimization of Soybean Protein Extraction with Ammonium Hydroxide (NH4OH) Using Response Surface Methodology

Plants have been recognized as renewable and sustainable sources of proteins. However, plant protein extraction is challenged by the plant's recalcitrant cell wall. The conventional extraction methods make use of non-reusable strong alkali chemicals in protein-denaturing extraction conditions. In this study, soy protein was extracted using NH₄OH, a weak, recoverable, and reusable alkali. The extraction conditions were optimized using response surface methodology (RSM). A central composite design (CCD) with four independent variables: temperature (25, 40, 55, 70, and 85 °C); NH₄OH concentration (0.5, 1, and 1.5%); extraction time (6, 12, 18, and 24 h) and solvent ratio (1:5, 1:10, 1:15 and 1:20 w/v) were used to study the response variables (protein yield and amine concentration). Amine concentration indicates the extent of protein hydrolysis. The RSM model equation for the independent and response variables was computed and used to create the contour plots. A predicted yield of 64.89% protein and 0.19 mM amine revealed a multiple R-squared value of 0.83 and 0.78, respectively. The optimum conditions to obtain the maximum protein yield (65.66%) with the least amine concentration (0.14 Mm) were obtained with 0.5% NH₄OH concentration, 12 h extraction time, and a 1:10 (w/v) solvent ratio at 52.5 °C. The findings suggest that NH₄OH is suitable to extract soybean protein with little or no impact on protein denaturation.

Combining multidimensional chromatography-mass spectrometry and feature-based molecular networking methods for the systematic characterization of compounds in the supercritical fluid extract of Tripterygium wilfordii Hook F

Tripterygium wilfordii Hook F from the family Celastraceae is a traditional Chinese medicine (TCM) whose principal chemical constituents are terpenoids, including sesquiterpene alkaloids and diterpenoids, which have unique and diverse structures and remarkable biological activities. In order to advance pharmacological research and guide the preparation of monomer compounds derived from T. wilfordii, a systematic approach to efficiently discover new compounds or their derivatives is needed. Herein, compound separation and identification were performed by offline reversed-phase × supercritical fluid chromatography coupled mass spectrometry (RP × SFC-Q-TOF-MS/MS) and Global Natural Product Social (GNPS) molecular networking. The 2D chromatography system exhibited a high degree of orthogonality and significant peak capacity, and SFC has an advantage during the separation of sesquiterpene alkaloid isomers. Feature-based molecular networking offers the great advantage of quickly detecting and clustering unknown compounds, which greatly assists in intuitively judging the type of compound, and this networking technique has the potential to dramatically accelerate the identification and characterization of compounds from natural sources. A total of 324 compounds were identified and quantitated, including 284 alkaloids, 22 diterpenoids and 18 triterpenoids, which means that there are numerous potential new compounds with novel structures to be further explored. Overall, feature-based molecular networking provides an effective method for discovering and characterizing novel compounds and guides the separation and preparation of targeted natural products.

Optimization and validation of a fast supercritical fluid chromatography tandem mass spectrometry method for the quantitative determination of a large set of PFASs in food matrices and human milk

An Ultra-High Performance Supercritical Fluid Chromatography coupled with tandem Mass Spectrometry analytical method (UHPSFC-MS/MS) was developed for the determination of 34 perfluoroalkylated substances (PFASs) in food-related matrices. Two parameters (i.e. stationary phase and co-solvent) were selected and optimized using a step-by-step method, while a design of experiment (DoE) method using a central composite design (CCD) was implemented to optimize column temperature, mobile phase flow rate, co-solvent concentration and automated back pressure regulator (ABPR). The Torus 2-PIC column was selected along with ammonium acetate AcoNH₄ as additive in the co-solvent. DoE optimization of both peak width and resolution enabled validating an optimized model (desirability 0.613) and setting column temperature at 38.7 °C, AcoNH₄ concentration at 8 mM, mobile phase flow rate of 1.9 mL/min and ABPR at 1654 psi. The validated resulting method enabled reaching limits of quantification below 0.2 ng/g (w.w.) for 97 % PFASs in accordance with current EU requirements. The strategy was successfully applied to the characterization of a range (n > 30) of food-related matrices (red meat, poultry meat, eggs, fish and breast milk) collected in Algeria in 2019. PFOA and PFBA were observed as the most frequently detected PFASs, i.e. in 96.96 % and 90.9 % of the samples respectively. The highest concentrations were determined in fishery products up to 4.42 ng/g (w.w.) for PFTeDA and 0.75 ng/g (w.w.) for PFOS.

High efficiency functionalized hydrophilic cyclofructans as stationary phases in sub/supercritical fluid chromatography

Packed column SFC has become very popular for preparative and analytical separations due to the low cost of CO₂, its accessible critical temperature, and pressure, with the additional benefit of a low environmental burden. Currently, there is a shortage of new polar stationary phase chemistries for SFC. In this work, two new functionalized cyclofructan columns are introduced and evaluated for their performance in achiral SFC separations for the first time. Cyclofructan (CF6), a macrocyclic oligosaccharide, was covalently linked with benzoic acid (BCF6) and propyl sulfonic acid (SCF6) groups by ether bonds. Superficially porous particles (2.7 μm) bonded with modified CF6 showed markedly different selectivity than native CF6. In SFC, peak shapes of amines and basic compounds are often compromised. We show that small quantities (~5.7% v/v) of water added to the methanol modifier in CO₂ improves peak symmetries of primary, secondary, and tertiary amines. Efficiencies as high as 200,000 plates/m (reduced plate height ~ 1.8) were observed for benzamide and amitriptyline on the BCF6 column. The relative standard deviations (RSDs) of retention times on BCF6 were about 1.4%, and on SCF6 were less than 1%. Amines on the SCF6 column showed plate counts as high as 170,000 plates/m. Tetramethylammonium acetate is examined as an alternative to water in MeOH. A run time of 36 min with methanol, trifluoroacetic acid, triethylamine mobile phase was reduced to <5 min with complete baseline resolution for a set of amines. The new stationary phases allow greener approaches towards solving separation problems.

Supercritical fluid chromatography-mass spectrometric determination of chiral fungicides in viticulture-related samples

Supercritical fluid chromatography (SFC), combined with mass spectrometry (MS), was employed for the determination of five chiral fungicides, from two different chemical families (acylalanine and triazol) in wine and vineyard soils. The effect of different SFC parameters (stationary phase, chiral selector, mobile phase modifier and additive) in the resolution between enantiomers and in the efficiency of compounds ionization at the electrospray source (ESI) was thorougly described. Under final working conditions, chiral separations of selected fungicides were achieved using two different SFC-MS methods, with an analysis time of 10 min and resolution factors from 1.05 to 2.45 between enantiomers. In combination with solid-phase extraction and pressurized liquid extraction, they permitted the enantiomeric determination of target compounds in wine and vineyard soils with limits of quantification in the low ppb range (between 0.5 and 2.5 ng mL^-1, and from 1.3 to 6.5 ng g^-1, for wine and soil, respectively), and overall recoveries above 80%, calculated using solvent-based standards. For azolic fungicides (tebuconazole, myclobutanil and penconazole) soil dissipation and transfer from vines to wines were non-enantioselective processes. Data obtained for acylalanine compounds confirmed the application of metalaxyl (MET) to vines as racemate and as the R-enantiomer. The enantiomeric fractions (MET-S/(MET-S+MET-R)) of this fungicide in vineyard soils varied from 0.01 to 0.96; moreover, laboratory degradation experiments showed that the relative dissipation rates of MET enantiomers varied depending on the type of soil.

Determination of the stoichiometry between a drug and its counter-ion by supercritical fluid chromatography using ultra-violet and evaporative light scattering detections: Application to ondansetron hydrochloride

In this paper, a supercritical fluid chromatography method using ultra-violet and evaporative light scattering detections (SFC-UV/ELSD) has been developed and validated for the stoichiometry determination of an antiemetic drug with its counter-ion i.e. ondansetron hydrochloride. Seven stationary phases were first screened using a CO₂-methanol-diethylamine mobile phase. Best conditions were determined using Derringer's desirability functions regarding chromatographic separation: selectivity, resolution, peak shape and runtime. The influence of co-solvent composition on resolution was evaluated. After optimization, best chromatographic results were obtained using 2-ethylpyridine stationary phase and a co-solvent composed of 0.2% diethylamine and 2% water in methanol. While ondansetron was quantified using UV detection (214 nm) and an external calibration curve, the determination of chloride was carried out using ELSD and an internal calibration curve. Then, the method was validated using the accuracy profile approach with a total error included in the ±10%. Finally, the proposed method was applied for the determination of the molar ratio between ondansetron and chloride. A value of 1.001 ± 0.003 demonstrated that the stoichiometry of this drug with its counter-ion was 1:1.

Chaotropic Effects in Sub/Supercritical Fluid Chromatography via Ammonium Hydroxide in Water-Rich Modifiers: Enabling Separation of Peptides and Highly Polar Pharmaceuticals at the Preparative Scale

Chromatographic separation, analysis and characterization of complex highly polar analyte mixtures can often be very challenging using conventional separation approaches. Analysis and purification of hydrophilic compounds have been dominated by liquid chromatography (LC) and ion-exchange chromatography (IC), with sub/supercritical fluid chromatography (SFC) moving toward these new applications beyond traditional chiral separations. However, the low polarity of supercritical carbon dioxide (CO₂) has limited the use of SFC for separation and purification in the bioanalytical space, especially at the preparative scale. Reaction mixtures of highly polar species are strongly retained even using polar additives in alcohol modifier/CO₂ based eluents. Herein, we overcome these problems by introducing chaotropic effects in SFC separations using a nontraditional mobile phase mixture consisting of ammonium hydroxide combined with high water concentration in the alcohol modifier and carbon dioxide. The separation mechanism was here elucidated based on extensive IC-CD (IC couple to conductivity detection) analysis of cyclic peptides subjected to the SFC conditions, indicating the in situ formation of a bicarbonate counterion (HCO₃^-). In contrast to other salts, HCO₃^- was found to play a crucial role acting as a chaotropic agent that disrupts undesired H-bonding interactions, which was demonstrated by size-exclusion chromatography coupled with differential hydrogen-deuterium exchange-mass spectrometry experiments (SEC-HDX-MS). In addition, the use of NH₄OH in water-rich MeOH modifiers was compared to other commonly used basic additives (diethylamine, triethylamine, and isobutylamine) showing unmatched chromatographic and MS detection performance in terms of peak shape, retention, selectivity, and ionization as well as a completely different selectivity and retention behavior. Moreover, relative to ammonium formate and ammonium acetate in water-rich methanol modifier, the ammonium hydroxide in water additive showed better chromatographic performance with enhanced sensitivity. Further optimization of NH₄OH and H₂O levels in conjunction with MeOH/CO₂ served to furnish a generic modifier (0.2% NH₄OH, 5% H₂O in MeOH) that enables the widespread transition of SFC to domains that were previously considered out of its scope. This approach is extensively applied to the separation, analysis, and purification of multicomponent reaction mixtures of closely related polar pharmaceuticals using readily available SFC instrumentation. The examples described here cover a broad spectrum of bioanalytical and pharmaceutical applications including analytical and preparative chromatography of organohalogenated species, nucleobases, nucleosides, nucleotides, sulfonamides, and cyclic peptides among other highly polar species.

Doing more with less: Evaluation of the use of high linear velocities in preparative supercritical fluid chromatography

The evaluation of higher than typical linear velocities is discussed for supercritical fluid chromatographic purifications on the preparative scale. SFC separation efficiency suffers far less at high linear velocities than HPLC by the rapid mass transfer of analytes carried by compressed CO₂ through the stationary phase. The technique is discussed using chiral test compounds and columns. In many cases, running at high linear velocities can yield significant time savings and decreased consumption of mobile phase solvent, while also lowering energy consumption. Within the practical limitations of commercial instrumentation, using 20 μm particles can aid in achieving higher linear velocities not attainable with smaller 5 μm particles, particularly when running with high percentages of organic co-solvent. Use of larger particles for the stationary phase also lowers the associated column cost. These benefits can yield an overall purification process that is more productive and environmentally friendly.

Evaluation of polysaccharide-based chiral stationary phases in modern SFC-MS/MS for enantioselective bioanalysis

Aim: The applicability of polysaccharide-based chiral stationary phases in modern supercritical fluid chromatography (SFC)-MS/MS for chiral bioanalysis was evaluated. Materials & methods: Ten popular polysaccharide-based chiral stationary phases (CSPs) were tested using a set of 23 drugs against three cosolvents. The effect of temperature and backpressure on separation was examined. Results: The recommended order of CSPs for screening was determined. Methanol with 0.1% NH₄OH is proven to be the first choice of cosolvent. Temperature of 40°C and backpressure of 10 or 15 MPa are recommended starting conditions. Phospholipid elution profiles on the polysaccharide-based CSPs were reported for the first time under SFC conditions. Conclusion: A simplified screening protocol with straightforward method optimization approaches was generated for SFC chiral assay development in a reasonable time frame with a high success rate.

CO2-switchable foams stabilized by a long-chain viscoelastic surfactant

Smart foams sensitive to external stimulation have gained increasing attention recently. However, reversibly switchable CO₂ foams have been less documented. In this work, a novel kind of CO₂-switchable foams was developed using a long-chain cationic surfactant, N-erucamidopropyl-N,N-dimethylammonium bicarbonate (UC₂₂AMPM⋅H⁺), as both the foaming agent and stabilizer. The foams can be rapidly transformed between stable and unstable states at ambient temperature with CO₂/NH₃·H₂O as the triggers. The foaming properties and switchable performance were examined by a combination of confocal microscopy, cryogenic transmission electron microscopy, and rheological techniques. The results demonstrated that the enhanced foam stability in the presence of CO₂ is attributed to the high bulk phase viscosity and gas/liquid surface viscosity, resulting from the entanglement of wormlike micelles (WLMs) formed from UC₂₂AMPM⋅H⁺. When NH₃·H₂O is added, the network structure of WLMs is disrupted, and the bulk phase viscosity and surface viscosity subsequently drop, consequently leading to an ultimate foam destabilization. Such a CO₂-sensitive viscoelastic surfactant could not only be used to fabricate smart CO₂ foams but can also enable CO₂ to play dual roles as both the dispersed phase, as most gases do, and an "activator" to protonate long-chain tertiary surfactants into cationic analogs to form viscoelastic WLMs to stabilize foams.

Enantioseparation of nornicotine in tobacco by ultraperformance convergence chromatography with tandem mass spectrometry

Nornicotine, an alkaloid constituent of tobacco, is a precursor to the carcinogen N-nitrosonornicotine that is produced during the curing and processing of tobacco. Accumulating evidence reveals that nornicotine enantiomers have different neurochemical and behavioral effects. In the present study, an accurate and rapid method was developed for the enantioseparation of (R)-(+)-nornicotine and (S)-(-)-nornicotine enantiomers in tobacco by ultra-performance convergence chromatography with tandem mass spectrometry. Chromatographic conditions were investigated to achieve the optimal resolution of two enantiomers. Results indicated that (R)-(+)-nornicotine and (S)-(-)-nornicotine could be separated within 5 min when ammonium hydroxide was added into the cosolvent, and the best resolution (Rs  = 4.76) was achieved on a immobilized cellulose tris-(3,5-dichlorophenylcarbamate) chiral stationary phase. The proposed method was validated and was finally applied to analyze the compositions of (R)-(+)-nornicotine and (S)-(-)-nornicotine in three typical types of tobaccos (flue-cured, burley, and oriental). It was found that, enantiomer fraction of nornicotine (the proportion of (S)-(-)-nornicotine in the nornicotine pool) in burley tobacco samples was relatively high and constant compared with flue-cured and oriental tobaccos. The effective and rapid enantioseparation of nornicotine may help the understanding of alkaloid metabolites in different tobacco varieties and may also benefit pharmacological studies of alkaloid enantiomers.

Analysis of polar urinary metabolites for metabolic phenotyping using supercritical fluid chromatography and mass spectrometry

Supercritical fluid chromatography (SFC) is frequently used for the analysis and separation of non-polar metabolites, but remains relatively underutilised for the study of polar molecules, even those which pose difficulties with established reversed-phase (RP) or hydrophilic interaction liquid chromatographic (HILIC) methodologies. Here, we present a fast SFC-MS method for the analysis of medium and high-polarity (-7≤cLogP≤2) compounds, designed for implementation in a high-throughput metabonomics setting. Sixty polar analytes were first screened to identify those most suitable for inclusion in chromatographic test mixtures; then, a multi-dimensional method development study was conducted to determine the optimal choice of stationary phase, modifier additive and temperature for the separation of such analytes using SFC. The test mixtures were separated on a total of twelve different column chemistries at three different temperatures, using CO2-methanol-based mobile phases containing a variety of polar additives. Chromatographic performance was evaluated with a particular emphasis on peak capacity, overall resolution, peak distribution and repeatability. The results suggest that a new generation of stationary phases, specifically designed for improved robustness in mixed CO2-methanol mobile phases, can improve peak shape, peak capacity and resolution for all classes of polar analytes. A significant enhancement in chromatographic performance was observed for these urinary metabolites on the majority of the stationary phases when polar additives such as ammonium salts (formate, acetate and hydroxide) were included in the organic modifier, and the use of water or alkylamine additives was found to be beneficial for specific subsets of polar analytes. The utility of these findings was confirmed by the separation of a mixture of polar metabolites in human urine using an optimised 7min gradient SFC method, where the use of the recommended column and co-solvent combination resulted in a significant improvement in chromatographic performance.

Simultaneous determination of 16 polycyclic aromatic hydrocarbons in reclaimed water using solid-phase extraction followed by ultra-performance convergence chromatography with photodiode array detection

A new fast and effective analysis method has been developed to simultaneously determine 16 polycyclic aromatic hydrocarbons in reclaimed water samples by ultra-performance convergence chromatography with photodiode array detection and solid-phase extraction. The parameters of ultra-performance convergence chromatography on the separation behaviors and the crucial condition of solid-phase extraction were investigated systematically. Under optimal conditions, the 16 polycyclic aromatic hydrocarbons could be separated within 4 min. The limits of detection and quantification were in the range of 0.4-4 and 1-10 μg/L in water, respectively. This approach has been applied to a real industrial wastewater treatment plant successfully. The results showed that polycyclic aromatic hydrocarbons were dramatically decreased after chemical treatment procedure, and the oxidation procedure was effective to remove trace polycyclic aromatic hydrocarbons.