Chemoselective and enantioselective analysis of proteinogenic amino acids utilizing N-derivatization and 1-D enantioselective anion-exchange chromatography in combination with tandem mass spectrometric detection

Evaluation of Individual Variation of d-Amino Acids in Human Plasma by a Two-Dimensional LC-MS/MS System and Application to the Early Diagnosis of Chronic Kidney Disease

For the discovery of sensitive biomarkers of kidney function focusing on chiral amino acids, a multiple heart-cutting two-dimensional (2D) liquid chromatography-mass spectrometry (LC-MS)/MS system has been designed/developed. As the target analytes, alanine (Ala), aspartic acid, glutamic acid (Glu), leucine (Leu), lysine, methionine, phenylalanine (Phe), proline (Pro), serine (Ser), and valine were selected considering the presence of their d-forms in mammals. The 2D LC-MS/MS system consisted of the nonenantioselective reversed-phase separation of the target amino acids, the separations of the d- and l-enantiomers, and detection using MS/MS. Using the method, the plasma chiral amino acids, precolumn derivatized with 4-fluoro-7-nitro-2,1,3-benzoxadiazole, were isolated from other intrinsic substances, then determined without losing sensitivity by the fully automated whole-peak volume transfer operation from first to second dimension. In all of the tested plasma samples obtained from five healthy individuals and 15 patients with chronic kidney disease (CKD), the target chiral amino acids were determined without interference. In healthy individuals, the levels of all the tested d-amino acids were regulated in the low ranges. In contrast, the % d values of Glu, Leu, and Phe significantly increased with the progress of kidney dysfunction, besides the previously reported values of d-Ala, Pro, and Ser. Concerning Phe, the significant increase of the % d values (p < 0.05) was reported for the first time even in the mild CKD group compared to those of the healthy group; d-Phe might be a more sensitive marker than the previously reported d-forms. These results demonstrated the potential of these d-forms as the sensitive biomarkers of kidney function for the early diagnosis of CKD.

Characterization of the internal working-life exposome using minimally and non-invasive sampling methods - a narrative review

During recent years, we are moving away from the 'one exposure, one disease'-approach in occupational settings and towards a more comprehensive approach, taking into account the totality of exposures during a life course by using an exposome approach. Taking an exposome approach however is accompanied by many challenges, one of which, for example, relates to the collection of biological samples. Methods used for sample collection in occupational exposome studies should ideally be minimally invasive, while at the same time sensitive, and enable meaningful repeated sampling in a large population and over a longer time period. This might be hampered in specific situations e.g., people working in remote areas, during pandemics or with flexible work hours. In these situations, using self-sampling techniques might offer a solution. Therefore, our aim was to identify existing self-sampling techniques and to evaluate the applicability of these techniques in an occupational exposome context by conducting a literature review. We here present an overview of current self-sampling methodologies used to characterize the internal exposome. In addition, the use of different biological matrices was evaluated and subdivided based on their level of invasiveness and applicability in an occupational exposome context. In conclusion, this review and the overview of self-sampling techniques presented herein can serve as a guide in the design of future (occupational) exposome studies while circumventing sample collection challenges associated with exposome studies.

Comprehensive reversed-phase×chiral two-dimensional liquid chromatography coupled to quadrupole-time-of-flight tandem mass spectrometry with post-first dimension flow splitting for untargeted enantioselective amino acid analysis

This work describes a comprehensive achiral × chiral two-dimensional liquid chromatography separation for enantioselective amino acid analysis coupled to electrospray ionization-tandem mass spectrometry detection using data-independent acquisition. Flow splitting after the first and second dimension separation was utilized for volumetric flow reduction and for enabling a multi-detector approach (with ultraviolet, fluorescence, charged aerosol, and MS detection), respectively. Derivatization with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate provided a chromophore, a fluorophore, and an efficient mass tag for efficient ionization in positive electrospray ionization-mass spectrometry. Chiral columns often have limitations in terms of their chemoselectivity, which may be a problem when complex sample mixtures with structurally related compounds need to be separated. It can be alleviated by a reversed-phase×chiral two-dimensional-liquid chromatography setup, in which the first dimension provides the chemoselectivity and a chiral tandem column constituted of quinine-carbamate derived weak anion-exchanger and zwitterionic ion-exchanger in the second dimension separation of D- and L-amino acid enantiomers. The method was used to control the stereointegrity of the therapeutic peptide octreotide. After hydrolysis, all amino acid constituents were detected with the correct configuration and composition. Some options for flow splitting and integration of destructive detectors in the first dimension separation are outlined.

A Facile and High-Sensitivity Method for Determining Proteinogenic Amino Acid Enantiomers by Integrating Chiral Phosphinate Derivatizing, 31P NMR and Parallel Reaction Monitoring

Here, we have documented a new protocol to determine d/l-amino acids by derivatizing amino acids via a chiral phosphinate. (R_P)-l-Menthyl phenylphosphinate was able to bond both primary and secondary amines, as well as improve the sensitivity of analytes in MS. Eighteen pairs of amino acids were successfully labeled except for Cys which has a thiol group on the side chain, and the chirality of amino acids can be discriminated by ³¹P NMR. Seventeen pairs of amino acids were separated by a C18 column within 45 min of elution, and resolution values ranged from 2.01 to 10.76. The lowest limit of detection was 10 pM acquired at parallel reaction monitoring, in which two factors collectively contributed that the ability of protonation of phosphine oxide and the sensitivity of parallel reaction monitoring. Chiral phosphine oxides might be a promising tool in future chiral metabolomics.

Boosting the enantioresolution of zwitterionic-teicoplanin chiral stationary phases by moving to wide-pore core-shell particles

A novel zwitterionic-teicoplanin chiral stationary phase (CSP), based on superficially porous particles (SPPs) of 2.7 µm particle diameter and 160 Å pore size, has been prepared and evaluated towards the enantioseparation of important classes of compounds, including chiral drugs, pesticides, and N-derivatized amino acids. The comparison with two analogous CSPs prepared on SPPs with 2.7 and 2.0 µm particle diameter and 90 Å pore size has revealed that the use of large-pore particles allows to dramatically improve both the enantioselectivity and the resolution-per-analysis-time, at the point that the column prepared with the new CSP outperformed the one packed with the finest particles. On the novel wide-pore CSP, the separation of fifteen racemates of pratical importance was significantly improved in terms of both enantioselectivity and resolution-per-analysis time-compared to the CSPs based on SPPs with smaller pores (90 Å). Such a CSP would be suitable for very fast enantioseparations allowing the saving of solvent for greener high-efficiency/high-throughput applications.

Enantioselective metabolomics by liquid chromatography-mass spectrometry

Metabolomics strives to capture the entirety of the metabolites in a biological system by comprehensive analysis, often by liquid chromatography hyphenated to mass spectrometry. A particular challenge thereby is the differentiation of structural isomers. Common achiral targeted and untargeted assays do not distinguish between enantiomers. This may lead to information loss. An increasing number of publications demonstrate that the enantiomeric ratio of certain metabolites can be meaningful biomarkers of certain diseases emphasizing the importance of introducing enantioselective analytical procedures in metabolomics. In this work, the state-of-the-art in the field of LC-MS based metabolomics is summarized with focus on developments in the recent decade. Methodologies, tagging strategies, workflows and general concepts are outlined. Selected biological applications in which enantioselective metabolomics has documented its usefulness are briefly discussed. In general, targeted enantioselective metabolomics assays are often based on a direct approach using chiral stationary phases (CSP) with polysaccharide derivatives, macrocyclic antibiotics, chiral crown ethers, chiral ion exchangers, donor-acceptor phases as chiral selectors. Rarely, these targeted assays focus on more than 20 analytes and usually are restricted to a certain metabolite class. In a variety of cases, pre-column derivatization of metabolites has been performed, especially for amino acids, to improve separation and detection sensitivity. Triple quadrupole instruments are the detection methods of first choice in targeted assays. Here, issues like matrix effect, absence of blank matrix impair accuracy of results. In selected applications, multiple heart cutting 2D-LC (RP followed by chiral separation) has been pursued to overcome this problem and alleviate bias due to interferences. Non-targeted assays, on the other hand, are based on indirect approach involving tagging with a chiral derivatizing agent (CDA). Besides classical CDAs numerous innovative reagents and workflows have been proposed and are discussed. Thereby, a critical issue for the accuracy is often neglected, viz. the validation of the enantiomeric impurity in the CDA. The majority of applications focus on amino acids, hydroxy acids, oxidized fatty acids and oxylipins. Some potential clinical applications are highlighted.

Fundamental to achieving fast separations with high efficiency: A review of chromatography with superficially porous particles

Types of particles have been fundamental to LC separation technology for many years. Originally, LC columns were packed with large-diameter (>100 μm) calcium carbonate, silica gel, or alumina particles that prohibited fast mobile-phase speeds because of the slow diffusion of sample molecules inside deep pores. During the birth of HPLC in the 1960s, superficially porous particles (SPP, ≥30 μm) were developed as the first high-speed stationary-phase support structures commercialized, which permitted faster mobile-phase flowrates due to the fast movement of sample molecules in/out of the thin shells. These initial SPPs were displaced by smaller totally porous particles (TPP) in the mid-1970s. But SPP history repeated when UHPLC emerged in the 2000s. Stationary-phase support structures made from sub-3-μm SPPs were introduced to chromatographers in 2006. The initial purpose of this modern SPP was to enable chromatographers to achieve fast separations with high efficiency using conventional HPLCs. Later, the introduction of sub-2-μm SPPs with UHPLC instruments pushed the separation speed and efficiency to a very fast zone. This review aims at providing readers a comprehensive and up-to-date view on the advantages of SPP materials over TPPs historically and theoretically from the material science angle.

Racemization without deamidation: Effect of racemization conditions on 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate tagged amino acids

The aim of this research study was to provide a more thorough understanding of the underlying mechanism and to broaden the application field of the recently introduced racemization method employing the amino acid derivatization tag 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC, AccQ) for heat-induced stereoisomerization of common amino acids as well as uniformly isotopically labeled [U-¹³C¹⁵N]-amino acids. The influence of different buffer types such as sodium borate buffer and sodium carbonate buffer as well as their pH and molarity on the racemization and deamidation of amino acids were investigated. It was found that a 0.4 M borate buffer with a pH of 8.0 +/- 0.2 was the most suitable derivatization as well as racemization buffer to ensure degradation free racemization of deamidation prone compounds such as glutamine. Hereby essential was the in-solution pH measurement before and after derivatization with AQC as well as after heat-induced racemization. This strategy provided further insight at which pH an actual racemization event was observed and when an unwanted deamidation of glutamine to glutamic acid occurred. In addition also the influence of the presence of oxygen during racemization was studied. In this context it was possible to determine ideal oxidation and racemization conditions for the production of scalemic mixtures of chiral isotopically labeled methionine AQC-DL-[U-¹³C¹⁵N]-Met as well as its oxidation products, AQC-DL-[U-¹³C¹⁵N]-Met-O and AQC-DL-[U-¹³C¹⁵N]-Met-O₂. All stereoselective separations were performed on the zwitterionic Chiralpak ZWIX(+) column combined with HPLC-ESI-QTOF-MS analysis in positive ionization mode.

The Way to Ultrafast, High-Throughput Enantioseparations of Bioactive Compounds in Liquid and Supercritical Fluid Chromatography

Until less than 10 years ago, chiral separations were carried out with columns packed with 5 or 3 μm fully porous particles (FPPs). Times to resolve enantiomeric mixtures were easily larger than 30 min, or so. Pushed especially by stringent requirements from medicinal and pharmaceutical industries, during the last years the field of chiral separations by liquid chromatography has undergone what can be defined a “true revolution”. With the purpose of developing ever faster and efficient method of separations, indeed, very efficient particle formats, such as superficially porous particles (SPPs) or sub-2 μm FPPs, have been functionalized with chiral selectors and employed in ultrafast applications. Thanks to the use of short column (1–2 cm long), packed with these extremely efficient chiral stationary phases (CSPs), operated at very high flow rates (5–8 mL/min), resolution of racemates could be accomplished in very short time, in many cases less than 1 s in normal-, reversed-phase and HILIC conditions. These CSPs have been found to be particularly promising also to carry out high-throughput separations under supercritical fluid chromatography (SFC) conditions. The most important results that have been recently achieved in terms of ultrafast, high-throughput enantioseparations both in liquid and supercritical fluid chromatography with particular attention to the very important field of bioactive chiral compounds will be reviewed in this manuscript. Attention will be focused not only on the latest introduced CSPs and their applications, but also on instrumental modifications which are required in some cases in order to fully exploit the intrinsic potential of new generation chiral columns.

Liquid chromatographic enantiomer separations applying chiral ion-exchangers based on Cinchona alkaloids

As the understanding of the various biological actions of compounds with different stereochemistry has grown, the necessity to develop methods for the analytical qualification and quantification of chiral products has become particularly important. The last quarter of the century has seen a vast growth of diverse chiral technologies, including stereocontrolled synthesis and enantioselective separation and analysis concepts. By the introduction of covalently bonded silica-based chiral stationary phases (CSPs), the so-called direct liquid chromatographic (LC) methods of enantiomer separation became the state-of-the-art methodology. Although a large number of CSPs is available nowadays, the design and development of new chiral selectors and CSPs are still needed since it is obvious that in practice one needs a good portfolio of different CSPs and focused "chiral columns" to tackle the challenging tasks. This review discusses and summarizes direct enantiomer separations of chiral acids and ampholytes applying anionic and zwitterionic ion-exchangers derived from Cinchona alkaloids with emphasis on literature data published in the last 10 years. Our aim is to provide an overview of practical solutions, while focusing on the integration of molecular recognition and methodological variables.

Enantioselective multiple heartcut two-dimensional ultra-high-performance liquid chromatography method with a Coreshell chiral stationary phase in the second dimension for analysis of all proteinogenic amino acids in a single run

A multiple heartcut (MHC) 2D-UHPLC method with UV detection has been developed for the enantioselective analysis of complex amino acid mixtures in a single run. The MHC method is based on an achiral gradient RPLC separation with 1.8 μm C18 phase (100 × 2.1 mm ID column) in the first dimension (¹D) and enantioselective isocratic separation on a tert-butylcarbamoylquinine-based 2.7 μm Coreshell particle column (50 × 3 mm ID) in the second dimension (²D). Pre-column derivatization has been performed with Sanger's reagent (2,4-dinitrofluorobenzene) yielding chromogenic 2,4-dinitrophenylated amino acids (DNP-AAs). Heartcuts of 40 μL fractions of the ¹D peaks were sampled into the ²D system via a two-position four-port dual valve connected to two loop decks each equipped with six 40 μL parking loops. Using this setup, 25 amino acids (20 proteinogenic plus allo-Thr, allo-Ile, homoserine (Hse), Orn, β-Ala) have been analyzed enantioselectively in a fully automated manner with a single chiral column within 130 min total run time (¹D and ²D). All ²D separations together took 101.5 min (29 cuts with 3.5 min run time each) and thus the total analysis time was quite efficiently utilized. Faster separations were restricted by some software constraints which did not allow to adjust run times in ²D individually. The practical utility of this enantioselective MHC method is documented by application for the absolute configuration determination of the amino acids in gramicidin and bacitracin. Further optimizations should lead to a generic enantioselective amino acid analyzer for the quality control of synthetic peptides and the structural characterization of non-ribosomal peptides.

Enantioselective ultra high performance liquid and supercritical fluid chromatography: The race to the shortest chromatogram

The ever-increasing need for enantiomerically pure chiral compounds has greatly expanded the number of enantioselective separation methods available for the precise and accurate measurements of the enantiomeric purity. The introduction of chiral stationary phases for liquid chromatography in the last decades has revolutionized the routine methods to determine enantiomeric purity of chiral drugs, agrochemicals, fragrances, and in general of organic and organometallic compounds. In recent years, additional efforts have been placed on faster, enantioselective analytical methods capable to fulfill the high throughput requirements of modern screening procedures. Efforts in this field, capitalizing on improved chromatographic particle technology and dedicated instrumentation, have led to highly efficient separations that are routinely completed on the seconds time scale. An overview of the recent achievements in the field of ultra-high-resolution chromatography on column packed with chiral stationary phases, both based on sub-2 μm fully porous and sub-3 μm superficially porous particles, will be given, with an emphasis on very recent studies on ultrafast chiral separations.

Future perspectives in high efficient and ultrafast chiral liquid chromatography through zwitterionic teicoplanin-based 2-μm superficially porous particles

With the aim of pushing forward the limits of high efficient and ultrafast chiral liquid chromatography, a new Chiral Stationary Phase (CSP) has been prepared by covalently bonding the teicoplanin selector on 2.0μm Superficially Porous Particles (SPPs). An already validated bonding protocol, which permits to achieve teicoplanin-based CSPs exhibiting zwitterionic behaviour, has been employed to prepare not only the 2.0μm version of the CSP but also two other analogous CSPs based, respectively, on 2.7μm SPPs and 1.9μm Fully Porous Particles (FPPs). The kinetic performance of these CSPs has been compared through the analysis of both van Deemter curves and kinetic plots by employing in-house packed columns of 4.6mm internal diameter and different lengths (20, 50 and 100mm). In particular on the columns packed with 2.0μm SPPs, extremely large efficiencies were observed for both achiral (>310,000 theoretical plates/meter, N/m; h_r: 1.61) and chiral compounds (>290,000 N/m; h_r: 1.72) in HILIC conditions. Thanks to their efficiency and enantioselectivity, these CSPs were successfully employed in ultrafast chiral separations. As an example, the enantiomers of haloxyfop were baseline resolved in about 3s, with a resolution higher than 2.0, (flow rate: 8mL/min) on a 2cm long column packed with the 2.0μm chiral SPPs.

Recent advancements and future directions of superficially porous chiral stationary phases for ultrafast high-performance enantioseparations

This review focuses on the use of superficially porous particles (SPPs) as chiral stationary phases for ultra-high performance liquid enantioseparations.

Enantioseparation of the constituents involved in the phenylalanine-tyrosine metabolic pathway by capillary electrophoresis tandem mass spectrometry

Catecholamines dopamine, norepinephrine, and epinephrine are well-known neurotransmitters playing different roles in the nervous and endocrine system. These compounds are biologically synthesized in the phenylalanine-tyrosine pathway which consists on the successive conversion of l-phenylalanine into l-tyrosine, l-3,4-dihydroxyphenylalanine (L-DOPA), dopamine, norepinephrine, and epinephrine. This work describes the development of an enantioselective CE-ESI-MS² methodology enabling, for the first time, the simultaneous enantioseparation of all the constituents involved in the Phe-Tyr metabolic pathway, since all these compounds except dopamine are chiral. The developed method was based on the use of a dual CDs system formed by 180mM of methyl-β-CD and 40mM of 2-hydroxypropyl-β-CD dissolved in 2M formic acid (pH 1.2) and presented the advantage of avoiding the use of any time-consuming labelling procedure. LODs ranged from 40 to 150nM and the unequivocal identification of the compounds investigated was achieved through their MS² spectra. The applicability of this methodology to the analysis of biological samples (rat plasma) was also demonstrated.

Chemo- and enantio-selective method for the analysis of amino acids by capillary electrophoresis with in-capillary derivatization

A novel dual chiral CE method was developed for the separation of l- and d-amino acids (AAs), using in-capillary derivatization with 9-fluoroenylmethyl chloroformate (FMOC). Firstly, using pre-column derivatization, the enantioseparation of FMOC-AAs was optimized according to the nature of cyclodextrins (CD). A background electrolyte (BGE) composed of 30 mM β-CD, 30 mM octakis(2,3-dihydroxy-6-O-sulfo)-γ-CD (OS-γ-CD), 40 mM tetraborate and 15% isopropanol (IPA) was selected and led to 17 baseline resolved pairs (R(s)=1.7-5.8) and two partially resolved pairs (Lys, R(s)=0.5 and Arg, R(s)=1.2). Experimental conditions for in-capillary derivatization were then optimized. Several parameters, such as mixing voltage and time, concentration of labeling solution and the length of the spacer plug were studied. The optimal conditions for in-capillary derivatization procedure were obtained using successive hydrodynamic injections (30 mbar) of AAs for 2s, borate buffer for 4s and 10mM FMOC solution for 6s, followed by a mixing at 3 kV for 72 s and wait time of 1 min. Moreover, a particular attention was paid to improve separation chemoselectivity. The effect on stereoselectivity and chemoselectivity of different factors, such as decrease of pH and tetraborate concentration and the addition of sodium dodecyl sulfate (SDS), was investigated using the in-capillary derivatization procedure. The best separation of a standard mixture of ten AA racemates was observed using a BGE containing 30 mM β-CD, 30 mM OS-γ-CD, 25 mM SDS, 40 mM sodium tetraborate and 17% IPA.