Monolithic molecular imprinted polymer fiber for recognition and solid phase microextraction of ephedrine and pseudoephedrine in biological samples prior to capillary electrophoresis analysis

Microextraction Techniques for Sample Preparation of Amphetamines in Urine: A Comprehensive Review

Psychological disorders and dramatic social problems are serious concerns regarding the abuse of amphetamine and its stimulant derivatives worldwide. Consumers of such drugs experience great euphoria along with serious health problems. Determination and quantification of amphetamine-type stimulants are indispensable skills for clinical and forensic laboratories. Analysis of low drug doses in bio-matrices necessitates applications of simple and also effective preparation steps. The preparation procedures not only eliminate adverse matrix effects, but also provide reasonable clean-up and pre-concentration benefits. The current review presents different methods used for sample preparation of amphetamines from urine as the most frequently used biological matrix. The advantages and limitations of various sample preparation methods were discussed focusing on the miniaturized methods.

Design of molecularly imprinted resin material with sulfonic acid functionalization for enantioseparation of (±)-cathine

In the current work, an enantioselective imprinting technique was used to develop a very selective adsorbent for the (+)-cathine ((+)-Cat) enantiomer. The phenolic sulfonamide produced from 2,4-dihydroxybenzenesulfonic acid (HBS) and (+)-Cat ((+)-Cat-HBS) was initially synthesized by triphenylphosphene activation and subsequently involved in condensation polymerization with resorcinol in the presence of formaldehyde under acidic conditions. Alkaline sulfonamide bond-breaking was subsequently employed to separate the (+)-Cat template from the polymer, and the resulting imprinted resin ((+)-CIP) displayed high selectivity for the (+)-Cat, with a capacity of 225 ± 2 mg/g. Studies of selectivity also showed that the (+)-Cat enantiomer was preferred over its counterpart because of the development of configurationally matching receptors. In addition, the produced resin was used for the enantioresolution of (±)-Cat racemate by column method, yielding a loading supernatant solution with an enantiomeric excess of (+)-Cat 50% and a recovery eluant solution with an excess of (-)-Cat 85%.

Synthesis of molecularly imprinted polymer as a nanosorbent for dispersive magnetic micro solid-phase extraction and determination of valsartan in biological samples by UV-Vis Spectrophotometry: Isotherm, kinetics, and thermodynamic studies

A magnetic molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization utilizing Fe₃O₄@SiO₂-MPS as a magnetic core, itaconic acid as a functional monomer, azobisisobutyronitrile as an initiator, and ethylene glycol dimethacrylate as a cross linker. It was then applied as a nanosorbent for dispersive magnetic micro solid phase extraction (DM-µ-SPE) and determination of valsartan in biological fluids. The morphology and structure of magnetic MIP were characterized by Fourier-transform infrared spectroscopy, Field Emission Scanning electron microscopy, Vibrating sample magnetometer, Energy dispersive x-ray analysis, and Thermogravimetric analysis. The influence of operation conditions on sorption, such as pH (4-10), contact time (10-25 min), initial concentration (1-30 mg L^-1), and temperature (25-40 °C) was investigated. After the extraction step, the valsartan concentration was determined by UV-Vis spectrophotometer at 253 nm. The isotherm and kinetic of valsartan sorption were best fitted by the Langmuir model (R² = 0.987) and the Pseudo second-order kinetic model (R² = 0.971), respectively. The maximum monolayer sorption capacity for magnetic MIP was obtained to be 4.56 mg g^-1. The analytical approach demonstrated favorable figures of merit, with a linear dynamic range of 10-100 µg L^-1, a low detection limit of 0.56 µg L^-1, and an acceptable preconcentration factor of 5 acquired in optimum conditions. The recoveries of the suggested technique at three spiked levels of analysis were in the range of 101 %-102 %. Valsartan was extracted from various real samples (urine and human blood plasma samples) utilizing the proposed magnetic nanosorbent, and the results exhibited that magnetic MIP was favorable for extraction and measurement of trace amounts of valsartan in biological samples.

Magnetic Molecularly Imprinted Polymers for the Separation and Enrichment of Cannabidiol from Hemp Leaf Samples

Cannabidiol (CBD) has attracted immense attention due to its excellent clinical effects in the treatment of various diseases. However, rapid and accurate extraction of CBD from hemp plant concentrates remains a challenge. Thus, novel magnetic molecularly imprinted polymers (CBD-MMIPs) with specific recognizing capability for CBD were synthesized using ethylene glycol dimethacrylate as the cross-linker, CBD as the template, methacrylic acid as the functional monomer, azobisisobutyronitrile as the initiator, and Fe₃O₄ nanoparticles modified with SiO₂ as the magnetic carrier. The morphological, magnetic, and adsorption properties of obtained CBD-MMIPs were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, surface area and porosity analyses, and various adsorption experiments. The results showed that the CBD-MMIPs had selective specificity and high adsorption capacity for CBD. The adsorption of CBD by CBD-MMIPs could reach equilibrium in a short time (30 min), and the maximum adsorption capacity was as high as 26.51 mg/g. The specific recognition and selectivity properties of CBD-MMIPs to CBD were significantly higher than that of other structural analogues, and the regeneration tests established that the CBD-MMIPs had good recyclability. Furthermore, the CBD-MMIPs could be successfully used as an adsorbent to the extraction of CBD from hemp leaf sample concentrates with high recovery efficiencies (93.46-97.40%).

Magnetic Surface Molecularly Imprinted Polymer for Selective Adsorption of 4-Hydroxycoumarin

4-hydroxyl coumarin (HC), an important intermediate during the synthesis procedure of rodenticide and anti-cardiovascular drug, shows highly medicinal value and economic value. To achieve the efficient adsorption of HC from natural biological samples, a novel magnetic surface molecularly imprinted polymer (HC/SMIPs) was constructed by employing methacrylic acid (MAA) as functional monomer, organic silane modified magnetic particles as matrix carrier and HC as template molecule. Due to the numerous specific imprinted cavities on the HC/SMIPs, the maximum adsorption capacity of HC/SMIPs for 4-hydroxycoumarin could reach to 22.78 mg g⁻¹ within 20 min. In addition, HC/SMIPs exhibited highly selective adsorption for 4-hydroxycoumarin compared with other active drug molecules (osthole and rutin) and showed excellent regeneration performance. After 8 cycles of adsorption-desorption tests, the adsorption capacity of HC/SMIPs just slightly decreased by 6.64%. The efficient selective removal and easy recycle of 4-hydroxycoumarin from biological samples by HC/SMIPs made a highly promising to advance the application of imprinting polymers in complex practical environments.

Application of HKUST-1 metal-organic framework as coating for headspace solid-phase microextraction of some addictive drugs

In the present study, a copper-based metal-organic framework (HKUST-1) was used first time for preconcentration trace amounts of addictive drugs in biological samples. HKUST-1 was synthesized and coated onto the surface of stainless steel wire. The prepared coating was used in headspace solid-phase microextraction method coupled with gas chromatography-mass spectrometry for preconcentration and determination of some addictive drugs in biological fluids. Prepared coating shows good extraction efficiency due to large surface area, and π-π stacking interaction with selected analytes. Under optimum conditions, the method was validated with a reasonable determination coefficient (R²  > 0.9961) and suitable linear dynamic range (0.5-1000 μg L^-1 ). Also, the limits of detections were obtained in the range of 0.1-0.4, 0.2-0.6, and 0.4-0.7 μg L^-1 for water, urine, and plasma samples, respectively. The limits of quantification of present method were obtained in the range 0.5-1.3, 0.7-1.5, and 1.0-1.9 μg L^-1 in water, urine, and plasma samples, respectively. The intra-day and inter-dye single fiber and fiber to fiber relative standard deviations were observed in the range 3.0-13.9% and 3.5-12.3%, respectively. Finally, the present method was applied for the determination of the drugs in biological samples.

Preparation of Monolithic Fibers in Fused Silica Capillary Molds for Molecularly Imprinted Solid-Phase Microextraction

In the last three decades, the use of molecularly imprinted polymers (MIPs) in sample preparation has continuously increased due to the high selectivity that they provide to this critical step. Of particular interest is the combination of molecular imprinting polymers and solid-phase microextraction (SPME) that allows the development of rapid and environmental friendly analytical methods, with high sensitivity and selectivity. The protocol herein presented describes a very simple strategy for the direct preparation of monolithic MIPs using silica capillaries as molds by the copolymerization of methacrylic acid and ethylene glycol dimethacrylate in the presence of propazine as template. The main factors affecting the polymer synthesis (e.g., porogen, monomer, cross-linker, polymerization mixture proportions, polymerization time, and fiber thickness) are described in detail. The proposed strategy is easy to perform in any laboratory without special equipment and allows precise control of the fiber thickness, overcoming this very common drawback in MIP-based fiber preparation.

Synthesis and characterization of magnetic molecularly imprinted polymers for effective extraction and determination of kaempferol from apple samples

The specific of magnetic molecularly imprinted polymers (Fe3O4@SiO2-MIPs) for kaempferol were fabricated by using acrylamide (AM) as the functional monomer, azobisisobutyronitrile (AIBN) as the initiator and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. The Fe3O4@SiO2-MIPs showed high adsorption capacity (3.84 mg/g) for kaempferol, and the adsorption equilibrium was achieved within 50 min. The specific recognition capacity of Fe3O4@SiO2-MIPs was 3.02 times as high as that of Fe3O4@SiO2-NIPs. The Fe3O4@SiO2-MIPs showed high selectivity towards kaempferol over structural analogues. The recoveries of proposed method at three spiked levels analysis were ranged from 90.5% to 95.4% with the relative standard deviations (RSD) less than 5%. The obtained Fe3O4@SiO2-MIPs were successfully applied for the extraction and determination of kaempferol from apple samples. The established method was simple and feasible, which showed high selectivity, fast separation and satisfactory recoveries for real sample analysis.

Multi-phase extraction of ephedrine from Pinellia ternata and herbal medicine using molecular imprinted polymer coated ionic liquid-based silica

INTRODUCTION

Ephedrine is a typical compound found in lots of plant species that is used in several medicines for the treatment of asthma and bronchitis. However, excess amounts are harmful to humans, so it needs to be removed.

OBJECTIVE

This study developed a multi-phase extraction (MPE) method with a molecular imprinted polymer (MIP) coated ionic liquid (IL)-based silica (SiO₂ @IL@MIP) to simultaneously extract and separate ephedrine from Pinellia ternata, 10 medicines, and urine samples.

METHODS

IL was immobilized on silica. Subsequently, the IL was combined with the functional monomer, followed by the addition of the crosslinker and template. The resulting sorbent was applied to the MPE, and the extraction, washing and elution solvents were evaluated.

RESULTS

Fourier-transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) confirmed the synthesis of SiO₂ @IL@MIP. A maximum adsorption amount of 5.76 mg/g was obtained at 30°C at a neutral pH. In MPE, 10.00 mL of methanol could extract all the ephedrine from Pinellia ternata. The interference was removed by washing with 4.00 mL of water, ethanol, and acetonitrile. Finally, 8.00 mL of methanol/acetic acid (99:1, v/v) was applied as the elution solvent. The following were extracted: 5.50 μg/g of ephedrine from Pinellia ternata, 0.00-46.50 μg/g from the 10 herbal medicines, and 68.70-102.80 μg/mL in the urine samples.

CONCLUSION

The proposed method was applied successfully to the simultaneously extraction and separation of ephedrine from plants and medicines. These results are expected to provide important data for the development of new methods for the separation and purification of bioactive compounds.

Multiphase extraction of ephedrine from Pinellia ternata using bionic liquid-modified polymer

Multiphase extraction (MPE) was applied as a developed, convenient and efficient method in separation of ephedrine from Pinellia ternata. Firstly, in order to increase the adsorption efficiency, bionic liquid-modified polymer was created. Comparing the effects of all sorbents under variables conditions, the highest amount of 5.8 mg/g can be adsorbed on dual imidazole ionic liquid modified polymer (Im-Im-Poly) in methanol/water (70:30, v/v) solution at 25°C within 30.0 min. Then the Im-Im-Poly was applied in MPE, after 7 times repetition of extraction, around 1.0 mg/g of ephedrine from Pinellia ternata was detected. After washing by water, ethanol and methanol, and elution by methanol/acetic acid (99.0:1.0, v/v), ephedrine was successfully separated.

Molecularly imprinted polymers for the detection of illegal drugs and additives: a review

This review (with 154 refs.) describes the current status of using molecularly imprinted polymers in the extraction and quantitation of illicit drugs and additives. The review starts with an introduction into some synthesis methods (lump MIPs, spherical MIPs, surface imprinting) of MIPs using illicit drugs and additives as templates. The next section covers applications, with subsections on the detection of illegal additives in food, of doping in sports, and of illicit addictive drugs. A particular focus is directed towards current limitations and challenges, on the optimization of methods for preparation of MIPs, their applicability to aqueous samples, the leakage of template molecules, and the identification of the best balance between adsorption capacity and selectivity factor. At last, the need for convincing characterization methods, the lack of uniform parameters for defining selectivity, and the merits and demerits of MIPs prepared using nanomaterials are addressed. Strategies are suggested to solve existing problems, and future developments are discussed with respect to a more widespread use in relevant fields. Graphical abstract This review gives a comprehensive overview of the advances made in molecularly imprinting of polymers for use in the extraction and quantitation of illicit drugs and additives. Methods for syntheses, highlighted applications, limitations and current challenges are specifically addressed.

Application of polyacrylamide gel as a new membrane in electromembrane extraction for the quantification of basic drugs in breast milk and wastewater samples

Introducing new membranes with green chemistry approach seems to be a great challenge for the development of a practical method in separation science. In this regard, for the first time, polyacrylamide gel as a new membrane in electromembrane extraction (EME) was used for the extraction of three model basic drugs (pseudoephedrine (PSE), lidocaine (LID), and propranolol (PRO)), followed by HPLC-UV. In comparison with conventional EME, in this method neither organic solvent nor carrier agents were used for extraction of mentioned drugs. Different variables for fabrication of polyacrylamide gel and extraction process were evaluated. Polyacrylamide gel (containing 12% (w/v) acrylamide, and 3.0% (w/w) bisacrylamide) with 2 mm thickness at pH = 1.5 was fabricated as membrane. The drugs were extracted from aqueous samples, through a polyacrylamide gel membrane, to an aqueous acceptor phase on membrane. Under the optimized extraction conditions (Voltage: 85 V, extraction time: 28 min, acceptor phase's pH: 4.0, and donor phase's pH: 7.0) limits of quantification and detection were in the ranges of 1.0-20.0 ng mL^-1 and 0.3-6.0 ng mL^-1, respectively. Applying the proposed method to determine and quantify intended drugs in breast milk, and wastewater samples have revealed acceptable results.

Molecular Imprinting Applications in Forensic Science

Producing molecular imprinting-based materials has received increasing attention due to recognition selectivity, stability, cast effectiveness, and ease of production in various forms for a wide range of applications. The molecular imprinting technique has a variety of applications in the areas of the food industry, environmental monitoring, and medicine for diverse purposes like sample pretreatment, sensing, and separation/purification. A versatile usage, stability and recognition capabilities also make them perfect candidates for use in forensic sciences. Forensic science is a demanding area and there is a growing interest in molecularly imprinted polymers (MIPs) in this field. In this review, recent molecular imprinting applications in the related areas of forensic sciences are discussed while considering the literature of last two decades. Not only direct forensic applications but also studies of possible forensic value were taken into account like illicit drugs, banned sport drugs, effective toxins and chemical warfare agents in a review of over 100 articles. The literature was classified according to targets, material shapes, production strategies, detection method, and instrumentation. We aimed to summarize the current applications of MIPs in forensic science and put forth a projection of their potential uses as promising alternatives for benchmark competitors.

Field-amplified sample injection in capillary electrophoresis with amperometric detection for the ultratrace analysis of diastereomeric ephedrine alkaloids

A coupling method of field-amplified sample injection (FASI) CE with amperometric detection is developed for ultratrace analysis of ephedrine alkaloids stereoisomers. FASI was introduced by injecting electrokinetically the sample solution for 10 s into the capillary filled with highly conductive background electrolyte (BGE). The diastereomeric selectivity and the detection sensitivity were improved by using borate buffer of high ionic strength as BGE. Parameters affecting FASI and CE separation were investigated to achieve the optimal conditions. Four analytes were separated within 15 min using 200 mmol/L borate buffer (pH 9.5) and separation voltage of +18 kV, with detection potential at +1.0 V (vs. Ag/AgCl) and carbon disc electrode as working electrode. Excellent linearity was observed between peak current and concentration of analytes in the range of 0.1-100 ng/mL. The LODs (S/N = 3) for (-)-ephedrine, (+)-pseudoephedrine, (-)-N-methylephedrine and (+)-N-methylpseudoephedrine were 39.3, 54.9, 30.8, and 44.1 pg/mL, respectively. The proposed method was successfully applied to the determination of alkaloids in Ephedra sinica, with results agreed well with HPLC method. Mean recoveries of 102.1-109.7% and RSDs less than 6% were found. And the merits of high sensitivity and selectivity, as well as a simple and stable operation, have been demonstrated.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

Fabrication of a novel electrochemical sensing platform based on a core–shell nano-structured/molecularly imprinted polymer for sensitive and selective determination of ephedrine

A simple methodology was used to develop a novel sensor based on a core–shell/molecularly imprinted polymer (MIP) for the determination of ephedrine.

Layer-by-layer coated molecular-imprinted solid-phase microextraction fibers for the determination of polar compounds in water samples

In this study, the selective extraction of polar compound in water samples was reported using molecular-imprinted solid-phase microextraction (MISPME) combined with dispersive liquid–liquid microextraction (DLLME) within situderivatization.

Solid phase microextraction and related techniques for drugs in biological samples

In drug discovery and development, the quantification of drugs in biological samples is an important task for the determination of the physiological performance of the investigated drugs. After sampling, the next step in the analytical process is sample preparation. Because of the low concentration levels of drug in plasma and the variety of the metabolites, the selected extraction technique should be virtually exhaustive. Recent developments of sample handling techniques are directed, from one side, toward automatization and online coupling of sample preparation units. The primary objective of this review is to present the recent developments in microextraction sample preparation methods for analysis of drugs in biological fluids. Microextraction techniques allow for less consumption of solvent, reagents, and packing materials, and small sample volumes can be used. In this review the use of solid phase microextraction (SPME), microextraction in packed sorbent (MEPS), and stir-bar sorbtive extraction (SBSE) in drug analysis will be discussed. In addition, the use of new sorbents such as monoliths and molecularly imprinted polymers will be presented.

Developments and trends of molecularly imprinted solid-phase microextraction

This review focuses on a solid-phase microextraction (SPME) method coupled with molecularly imprinted polymers (MIPs), namely molecularly imprinted solid-phase microextraction (MISPME). The first two sections discuss the summaries of conventional SPME and MIPs. The third section reviews the development of MISPME in past years, including the preparation of MISPME, and the applications to compounds in real samples.