Electromembrane extraction using stabilized constant d.c. electric current—A simple tool for improvement of extraction performance

Nanoplastic Sample Cleanup by Micro-Electromembrane Extraction across Free Liquid Membranes

Sample preparation techniques enabling the separation and cleanup of nanoplastics removing other components present in complex sample matrices are scarce. Herein, micro-electromembrane extraction (μ-EME) has been explored for this purpose based on the extraction of nanoplastic particles across a free liquid membrane (FLM). The extraction unit is based on a perfluoroalkoxy tube sequentially filled with the acceptor solution (20 μL 5 mM phosphate buffer, pH 10.7), FLM (10 μL 1-pentanol), and donor solution (20 μL sample/standard solution). Sulfonated polystyrene beads (200 nm particle size) were selected as a model mimicking negatively charged nanoplastics. At 700 V, nanoplastics transferred from the donor solution into the FLM before moving across the FLM into the acceptor solution. Quantitative nanoplastic measurements after μ-EME were performed by injecting the acceptor solution into a capillary electrophoresis system with diode array detection. μ-EME allowed the rapid nanoplastic sample cleanup, requiring an extraction time of just 90 s and obtaining a nanoplastic transfer yield through the FLM of 60% with RSD values below 9%. The μ-EME technique enabled the efficient sample matrix cleanup of nanoplastics spiked in different tea matrices. Nanoplastic transfer yield through the FLM for black tea and flavored tea matrices were 56% and 47%, respectively, with complete sample matrix removal of UV-absorbing compounds.

Electromembrane extraction of peptides and amino acids - status and perspectives

This article reviews the scientific literature on electromembrane extraction (EME) of peptides and amino acids. In EME, target analytes are extracted from aqueous sample, through a supported liquid membrane (organic) and into a microliter volume of aqueous buffer (acceptor). Experimental conditions and performance for EME of peptides and amino acids are reviewed and discussed in detail, providing readers with an overview and basic understanding of the subject. In addition, this review discuss the potential for future applications, and scientific questions that need to be addressed for EME of peptides and amino acids to be generally accepted. EME is under commercialization, and therefore we expect it will be an active area of research in the near future.

Hollow fiber-based liquid phase microextraction followed by analytical instrumental techniques for quantitative analysis of heavy metal ions and pharmaceuticals

Hollow-fiber liquid-phase microextraction (HF-LPME) and electromembrane extraction (EME) are miniaturized extraction techniques, and have been coupled with various analytical instruments for trace analysis of heavy metals, drugs and other organic compounds, in recent years. HF-LPME and EME provide high selectivity, efficient sample cleanup and enrichment, and reduce the consumption of organic solvents to a few micro-liters per sample. HF-LPME and EME are compatible with different analytical instruments for chromatography, electrophoresis, atomic spectroscopy, mass spectrometry, and electrochemical detection. HF-LPME and EME have gained significant popularity during the recent years. This review focuses on hollow fiber based techniques (especially HF-LPME and EME) of heavy metals and pharmaceuticals (published 2017 to May 2019), and their combinations with atomic spectroscopy, UV-VIS spectrophotometry, high performance liquid chromatography, gas chromatography, capillary electrophoresis, and voltammetry.

Miniaturized sample preparation methods for saliva analysis

Saliva, as the first body fluid encountering with the exogenous materials, has good correlation with blood and plays an important role in bioanalysis. However, saliva has not been studied as much as the other biological fluids mainly due to restricted access to its large volumes. In recent years, there is a growing interest for saliva analysis owing to the emergence of miniaturized sample preparation methods. The purpose of this paper is to review all microextraction methods and their principles of operation. In the following, we examine the methods used to analyze saliva up to now and discuss the potential of the other microextraction methods for saliva analysis to encourage research groups for more focus on this important subject area.

A new microfluidic-chip device for selective and simultaneous extraction of drugs with various properties

In the present study, a newly designed microfluidic-chip device was used for the selective and simultaneous electromembrane extraction (EME) of drugs with different properties.

Electromembrane extraction of verapamil and riluzole from urine and wastewater samples using a mixture of organic solvents as a supported liquid membrane: Study on electric current variations

In this study, the application of a mixture of organic solvents as a supported liquid membrane for improving the efficiency of the electromembrane extraction procedure was investigated. The extraction process was followed by high-performance liquid chromatography analysis of two model drugs (verapamil and riluzole). In this research, four organic solvents, including 1-heptanol, 1-octanol, 2-nitrophenyl octyl ether, and 2-ethyl hexanol, were selected as model solvents and different binary mixtures (v/v 2:1, 1:1 and 1:2) were used as the supported liquid membrane. The mixture of 2-ethyl hexanol and 1-otanol (v/v, 2:1) improved the extraction efficiency of model drugs by 1.5 to 12 times. It was found that extraction efficiency is greatly influenced by the level of electric current. In this study, for various mixtures of organic solvents, the electric current fluctuated between 50 and 2500 μA, and the highest extraction efficiencies were obtained with low and stable electric currents. Finally, the optimized extraction condition was validated and applied for the determination of model drugs in urine and wastewater samples.

A novel electro-driven membrane for removal of chromium ions using polymer inclusion membrane under constant D.C. electric current

In this study, the use of polymer inclusion membrane under constant electric current for the removal of Cr(VI) from water has investigated for the first time. Transport of Cr(VI) is performed by an electric current from the donor phase to the acceptor phase with a constant electric current of 0.5A. The optimized membrane includes of 12.1% 2-nitrophenyl octyl ether (2-NPOE), 77.6% cellulose triacetate (CTA), 10.3% tricapryl-methylammonium chloride (Aliquat 336) as a carrier. We tested the applicability of the selected membrane for Cr(VI) removal in real environmental water samples and evaluated its reusability. Electro membrane experiments were carried out under various parameters, such as the effect of electro membrane voltage at constant DC electric current; electro membrane current at constant voltage, acceptor phase pH, and stable electro membrane; and a comparison of polymer inclusion membrane and electro membrane transport studies. The Cr(VI) transport was achieved 98.33% after 40min under optimized conditions. An alternative method has been employed that eliminates the changing of electrical current by the application of constant electric current for higher reproducibility of electro membrane extraction experiments by combining the excellent selective and long-term use features of polymer inclusion membrane.

Electroextraction and electromembrane extraction: Advances in hyphenation to analytical techniques

Electroextraction (EE) and electromembrane extraction (EME) are sample preparation techniques that both require an electric field that is applied over a liquid-liquid system, which enables the migration of charged analytes. Furthermore, both techniques are often used to pre-concentrate analytes prior to analysis. In this review an overview is provided of the body of literature spanning April 2012-November 2015 concerning EE and EME, focused on hyphenation to analytical techniques. First, the theoretical aspects of concentration enhancement in EE and EME are discussed to explain extraction recovery and enrichment factor. Next, overviews are provided of the techniques based on their hyphenation to LC, GC, CE, and direct detection. These overviews cover the compounds and matrices, experimental aspects (i.e. donor volume, acceptor volume, extraction time, extraction voltage, and separation time) and the analytical aspects (i.e. limit of detection, enrichment factor, and extraction recovery). Techniques that were either hyphenated online to analytical techniques or show high potential with respect to online hyphenation are highlighted. Finally, the potential future directions of EE and EME are discussed.

Quantitative aspects of electrolysis in electromembrane extractions of acidic and basic analytes

Electrolysis is omnipresent in all electrochemical processes including electromembrane extraction (EME). The effects of electrolysis on quantitative aspects of EME were comprehensively evaluated for a set of acidic (substituted phenols) and basic (basic drugs) analytes. EMEs were carried out across supported liquid membranes formed by 1-ethyl-2-nitrobenzene at standard EME conditions, i.e., acidic analytes were extracted from alkaline into alkaline solutions and basic analytes were extracted from acidic into acidic solutions. Electric potential applied across the EME systems was 50 V and extraction recoveries of analytes as well as pH values of donor and acceptor solutions were determined after each EME. It has been proven that electrolysis plays a more significant role than has ever been thought before in EME. Electrolytically produced H(+) and OH(-) ions had a significant effect on pH values of acceptor solutions and variations of up to 8.5 pH units were obtained at standard EME conditions. pH values of donor solutions were affected only negligibly due to their significantly higher volumes. The observed variations in pH values of acceptor solutions had fatal consequences on quantitative EME results of weak and medium strong acidic/basic analytes. A direct relation was observed between the decrease in extraction recoveries of the analytes, their pKa values and the acceptor solution pH values. Acceptor solutions consisting of high concentrations of weak bases or acids were thus proposed as suitable EME operational solutions since they efficiently eliminated the electrolytically induced pH variations, offered stable EME performances and were easily compatible with subsequent analytical methods.

The potential of electromembrane extraction for bioanalytical applications

Modern requirements in the field of bioanalysis often involve miniaturized, high-throughput sample preparation techniques that consume low amounts of both sample and potentially hazardous organic solvents. Electromembrane extraction is one technique that meets several of these requirements. In this principle analytes are selectively extracted from a biological matrix, through a supported liquid membrane and into an aqueous acceptor solution. The whole extraction process is facilitated by an electric field across the supported liquid membrane, which greatly reduces the extraction time. This review will give a thorough overview of recent advances in bioanalytical applications involving electromembrane extraction, and discuss both possibilities and challenges of the technique in a bioanalytical setting.

Development of ionic liquid based electromembrane extraction and its application to the enrichment of acidic compounds in pig kidney tissues

An ionic liquid based electromembrane extraction (IL-EME) method, in which electrokinetic migration served as the main driving force, was developed for the determination of acidic compounds for the first time.

Electromembrane extraction--three-phase electrophoresis for future preparative applications

The purpose of this article is to discuss the principle and the future potential for electromembrane extraction (EME). EME was presented in 2006 as a totally new sample preparation technique for ionized target analytes, based on electrokinetic migration across a supported liquid membrane under the influence of an external electrical field. The principle of EME is presented, and typical performance data for EME are discussed. Most work with EME up to date has been performed with low-molecular weight pharmaceutical substances as model analytes, but the principles of EME should be developed in other directions in the future to fully explore the potential. Recent research in new directions is critically reviewed, with focus on extraction of different types of chemical and biochemical substances, new separation possibilities, new approaches, and challenges related to mass transfer and background current. The intention of this critical review is to give a flavor of EME and to stimulate into more research in the area of EME. Unlike other review articles, the current one is less comprehensive, but put more emphasis on new directions for EME.

Electromembrane Surrounded Solid Phase Microextraction Followed by Injection Port Derivatization and Gas Chromatography-Flame Ionization Detector Analysis for Determination of Acidic Herbicides in Plant Tissue

Electromembrane surrounded solid phase microextraction (EM-SPME) of acidic herbicides was studied for the first time. In order to investigate the capability of this new microextraction technique to analyze acidic targets, chlorophenoxy acid (CPA) herbicides were quantified in plant tissue. 1-Octanol, was sustained in the pores of the wall of a hollow fiber and served as supported liquid membrane (SLM). Other EM-SPME related parameters, including extraction time, applied voltage, and pHs of the sample solution and the acceptor phase, were optimized using experimental design. A 20 min time frame was needed to reach the highest extraction efficiency of the analytes from a 24 mL alkaline sample solution across the organic liquid membrane and into the aqueous acceptor phase through a 50 V electrical field, and to their final adsorption on a carbonaceous anode. In addition to high sample cleanup, which made the proposed method appropriate for analysis of acidic compounds in a complicated media (plant tissue), 4.8% of 2-methyl-4-chlorophenoxyacetic acid (MCPA) and 0.6% of 2,4-dichlorophenoxyacetic acid (2,4-D) were adsorbed on the anode, resulting in suitable detection limits (less than 5 ng mL^-1), and admissible repeatability and reproducibility (intra- and interassay precision were in the ranges of 5.2-8.5% and 8.8-12.0%, respectively). Linearity of the method was scrutinized within the ranges of 1.0-500.0 and 10.0-500.0 ng mL^-1 for MCPA and 2,4-D, respectively, and coefficients of determination greater than 0.9958 were obtained. Optimal conditions of EM-SPME of the herbicides were employed for analysis of CPAs in whole wheat tissue.

Low voltage electrically stimulated lab-on-a-chip device followed by red-green-blue analysis: a simple and efficient design for complicated matrices

An electrical field-induced lab-on-a-chip design followed by RGB analysis is introduced to develop a portable device for analysis of Pb²⁺.

Electrical field-induced extraction and separation techniques: promising trends in analytical chemistry--a review

Sample preparation is an important issue in analytical chemistry, and is often a bottleneck in chemical analysis. So, the major incentive for the recent research has been to attain faster, simpler, less expensive, and more environmentally friendly sample preparation methods. The use of auxiliary energies, such as heat, ultrasound, and microwave, is one of the strategies that have been employed in sample preparation to reach the above purposes. Application of electrical driving force is the current state-of-the-art, which presents new possibilities for simplifying and shortening the sample preparation process as well as enhancing its selectivity. The electrical driving force has scarcely been utilized in comparison with other auxiliary energies. In this review, the different roles of electrical driving force (as a powerful auxiliary energy) in various extraction techniques, including liquid-, solid-, and membrane-based methods, have been taken into consideration. Also, the references have been made available, relevant to the developments in separation techniques and Lab-on-a-Chip (LOC) systems. All aspects of electrical driving force in extraction and separation methods are too specific to be treated in this contribution. However, the main aim of this review is to provide a brief knowledge about the different fields of analytical chemistry, with an emphasis on the latest efforts put into the electrically assisted membrane-based sample preparation systems. The advantages and disadvantages of these approaches as well as the new achievements in these areas have been discussed, which might be helpful for further progress in the future.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2010-2012)

CE has been alive for over two decades now, yet its sensitivity is still regarded as being inferior to that of more traditional methods of separation such as HPLC. As such, it is unsurprising that overcoming this issue still generates much scientific interest. This review continues to update this series of reviews, first published in Electrophoresis in 2007, with updates published in 2009 and 2011 and covers material published through to June 2012. It includes developments in the field of stacking, covering all methods from field amplified sample stacking and large volume sample stacking, through to isotachophoresis, dynamic pH junction and sweeping. Attention is also given to online or inline extraction methods that have been used for electrophoresis.

Electromembrane extraction--a novel extraction technique for pharmaceutical, chemical, clinical and environmental analysis

Electromembrane extraction (EME) is a novel sample preparation technique in pharmaceutical, chemical, clinical and environmental analysis. This technique uses electromigration across artificial liquid membranes for selective extraction of analytes and sample enrichment from complex matrices. This review focuses on the setup, general procedure and parameters affecting the extraction efficiency of EME. An overview of innovations in EME (on-chip EME, low voltage EME, drop-to-drop EME, pulsed EME and EME followed by low-density solvent based ultrasound-assisted emulsification microextraction) is also presented in this article and attention is focused on the use of EME for pharmaceutical, chemical, clinical and environmental analysis.