Overlapping elution–extrusion counter-current chromatography: A novel method for efficient purification of natural cytotoxic andrographolides from Andrographis paniculata

Effect of activated carbon microstructure and adsorption mechanism on the efficient removal of chlorophyll a and chlorophyll b from Andrographis paniculata extract

In order to reveal the effect of activated carbon (AC) properties on the adsorption of chlorophyll a (Chl a) and chlorophyll b (Chl b) in Andrographis paniculata extract, four commercial activated carbons were first tested and characterized. The results showed that activated carbon 1 (AC1) had the best surface area, pore structure and adsorption capacity. Therefore, adsorption isotherms, adsorption kinetics and adsorption mechanism were further carried out on AC1. The application of Langmuir model (R2 > 0.978) and Freundlich model (R2 > 0.977) indicated that the adsorption process of Chl a and Chl b on AC1 may be a complex adsorption process of single-layer and multilayer adsorption. The adsorption kinetics indicated that the pseudo-second-order kinetic model (R2 > 0.999) was dominant and was mainly chemisorption. The intra-particle diffusion model (R2 > 0.937) shows that the intra-particle diffusion is the rate-limiting step. The decrease of adsorption of AC1 to Chl a and Chl b due to the oxidation of acrylic acid proves the importance of π-π interaction.

Preparation of Isoquercetin From Toona sinensis by Liquid-Liquid-Refining Extraction And Consecutive Counter-Current Chromatography

A high-speed counter-current chromatographic (HSCCC) method using ethyl acetate-water as solvent system was established to separate isoquercetin from Toona sinensis. In an HSCCC single separation, the sample sizes of ethanol extract were optimized from 203 to 1200 mg. The results showed that the yield of the target compound increased from 4 to 26 mg, and the corresponding purity decreased from 93.30 to 81.82%. To further improve the yield and purity, liquid-liquid-refining extraction was introduced to pretreat the ethanol extract and enrich the target compound. The ethanol extract was extracted with n-hexane-ethyl acetate-method-water (1:5:1:5, v/v) and ethyl acetate-water in turn to remove the low-polarity and high-polarity impurities and obtain the crude sample. Under the similar conditions, 85.25 mg of the target compound with the purity of 95.12% was separated from 240 mg of the crude sample. Subsequently, a consecutive HSCCC was developed to obtain 257 mg of the target compound from 720 mg of crude sample, which was equivalent to 14.4 g of ethanol extract. This method improved the purity of the target compound, but more importantly, the sample size can reach 12 times of the maximum sample size of the ethanol extract in a single run.

A simple and highly efficient counter-current chromatography method for the isolation of concentrated fractions of compounds based on the sequential sample loading technique: Comparative theoretical study of conventional multiple and intermittent sample loading counter-current chromatography separations

A new modification of the conventional multiple sample loading (MSL) mode - sequential sample loading (SSL) - is suggested to enhance further the performance of the counter-current chromatography (CCC) separation processes. The sequential sample loading technique is simple and easy to implement: the continuous sample solution supply to a CCC column is alternated (interrupted) with short periods of the "pure" mobile phase supply. Periodic (batch) and continuous SSL CCC separations can be designed and implemented. In continuous processes, the sample solution loading is carried out in the form of separate series, consisting of a number of sequential sample solution loads. In this work, the modeling of the conventional multiple sample loading and the sequential sample loading counter-current chromatography is used to compare the two operating modes considered. Equations for the calculation of band profiles, the recovery yield and the purity are given. Equations are also derived permitting the calculation of the optimum operating parameters of the separation processes. It is shown that the use of sequential sample loading makes it possible to produce fractions of purified compounds with a much higher concentration than in the original sample solution. The simulations of the conventional multiple sample loading and the sequential sample loading counter-current chromatography separations are presented in "Mathcad" software.

Development of an effective method based upon second-order overlapping repeated sample injections for isolation of carotenoids from Lycium barbarum L. fruits with elution-extrusion counter-current chromatography

Carotenoids are one of the main active components in Lycium barbarum L. fruit, which has a wide range of excellent biological activities. In this study, a novel second-order overlapping repeated injection method with elution-extrusion counter-current chromatography was developed for isolation and preparation of carotenoids from L. barbarum fruits. And three carotenoids were successfully separated using the solvent system composed of n-hexane/dichloromethane/acetonitrile (10:3.5:6.5, v/v) with the injection before equilibrium method. The entire separation process consisted of three complete elution-extrusion cycles with a total of 9 injections (80 mg crude extract per injection). Finally, three target compounds including zeaxanthin (28.5 mg), zeaxanthin monopalmitate (45.8 mg), and zeaxanthin dipalmitate (161.5 mg) with average purities of 87.9%, 88.9%, and 91.2% were successfully obtained in one complete second-order overlapping repeated elution-extrusion CCC process within 651 min. The result indicated that this second-order overlapping repeated method is efficient for large-scale preparation of carotenoids based on its advantages of large amount of sample injection and low solvent consumption. So this novel second-order overlapping repeated elution-extrusion counter-current chromatography separation method has enormous potential for largely preparative separation of natural bioactive compounds, such as carotenoids, which have good biological activity but possess unstable or other special chemical structure. It is worth noting that this overlapping repeated injections method requires target compounds to meet the requirements of elution-extrusion counter-current chromatography, and the normal implementation of this method is closely related to the sufficient interval of elution time between the target compounds.

Andrographolide Exerts Antihyperglycemic Effect through Strengthening Intestinal Barrier Function and Increasing Microbial Composition of Akkermansia muciniphila

Accumulating evidence indicates that type 2 diabetes (T2D) is associated with intestinal barrier dysfunction and dysbiosis, implying the potential targets for T2D therapeutics. Andrographolide was reported to have several beneficial effects on diabetes and its associated complications. However, the protective role of andrographolide, as well as its underlying mechanism against T2D, remains elusive. Herein, we reported that andrographolide enhanced intestinal barrier integrity in LPS-induced Caco-2 cells as indicated by the improvement of cell monolayer barrier permeability and upregulation of tight junction protein expression. In addition, andrographolide alleviated LPS-induced oxidative stress by preventing ROS and superoxide anion radical overproduction and reversing glutathione depletion. In line with the in vitro results, andrographolide reduced metabolic endotoxemia and strengthened gut barrier integrity in db/db diabetic mice. We also found that andrographolide appeared to ameliorate glucose intolerance and insulin resistance and attenuated diabetes-associated redox disturbance and inflammation. Furthermore, our results indicated that andrographolide modified gut microbiota composition as indicated by elevated Bacteroidetes/Firmicutes ratio, enriched microbial species of Akkermansia muciniphila, and increased SCFAs level. Taken together, this study demonstrated that andrographolide exerted a glucose-lowering effect through strengthening intestinal barrier function and increasing the microbial species of A. muciniphila, which illuminates a plausible approach to prevent T2D by regulating gut barrier integrity and shaping intestinal microbiota composition.

Operating mode and parameter selection in liquid-liquid chromatography

The presence of a liquid stationary phase in liquid-liquid chromatography (LLC) allows for high versatility of operation as well as adaptability to different sample types and separation tasks. LLC, also known as countercurrent chromatography (CCC) or centrifugal partition chromatography (CPC), offers the user a variety of operating modes, many of which have no direct equivalent in conventional preparative liquid-solid chromatography. These operating modes have the potential to greatly improve LLC separation performance compared to the standard "classical" isocratic batch injection mode, and they often require minimal to no addition of equipment to the standard set-up. However, reports of the use of alternative LLC operating modes make up only a fraction of the literature. This is likely due, at least in part, to the lack of clear guidelines and methods for operating mode and parameter selection, leaving alternative process options to be avoided and underutilized. This review seeks to remedy this by providing a thorough overview of the available LLC operating modes, identifying the key characteristics, advantages and disadvantages, and areas of application of each. Additionally, the equations and short-cut models aiding in operating mode and parameter selection are presented and critiqued, and their notation is unified for clarity. By rendering LLC and its alternative operating modes more accessible to current and prospective users, it is hoped to help expand the application of this technology and support the achievement of its full potential.

Methanol linear gradient counter-current chromatography for the separation of natural products: Sinopodophyllum hexandrum as samples

Counter-current chromatography (CCC) is a unique, liquid-liquid partition chromatography process. Both the mobile and stationary phases are liquids, so no solid support matrix is used. CCC has gained wide acceptance as a preparative technique in a variety of fields. Because the mobile and stationary phases are both liquids, gradient elution is difficult to perform with CCC. Phase equilibrium must be maintained, so any change in the composition of one phase may induce a compositional change in the other. In this work, a new linear gradient elution method was developed for CCC. Biphasic solvent systems containing heptane, ethyl acetate, methanol, and water (HepEMWat) in various ratios were prepared and used to optimize both isocratic and linear gradient CCC separation with methanol. We first separated a test mixture of four standard compounds with partition coefficients ranging from 0.8 to 7.8. The separation resembled a reversed-phase process, and elution was performed while progressively decreasing the polarity of the mobile phase. Target molecules with small partition coefficients eluted first in the lower phase of the optimized HepEMWat solvent system. Elution of constituents with large partition coefficients was quite slow under isocratic conditions. Separation time was significantly reduced when elution was performed with a linear gradient using methanol and the optimal HepEMWat system. Elution with a 3:7:4:6 (v/v/v/v) HepEMWat system took approximately 200 min. This included an 80-min isocratic step, followed by gradient elution with methanol from 0% to 30%. The optimized methanol linear gradient CCC method was then used to separate a complex mixture of natural products isolated from Sinopodophyllum hexandrum (Royle) Ying roots. Twelve compounds with a wide range of polarities were well-resolved in a single separation. We have developed a convenient and cost-effective strategy for the separation of complex mixtures. No tedious mobile phase preparation step is required. The volume of unused mobile phase is minimal, so little solvent is wasted. The method is an important advance for the separation of mixtures that contain many compounds with a large range of polarities and partition coefficients, which are common features of natural products.

Preparation of DESIGNER extracts of red clover (Trifolium pratense L.) by centrifugal partition chromatography

Starting with an isoflavone-rich red clover extract (RCE), this study expands on the DESIGNER approach to Deplete and Enrich Select Ingredients to Generate Normalized Extract Resources using countercurrent separation (CCS) methodology. A hydrostatic CCS (also known as centrifugal partition chromatography, CPC) technique was used to enrich and deplete selected bioactive isoflavones of RCE extracts. In order to efficiently prepare large enough DESIGNER extracts from RCE for biological testing including in vivo assays, it was necessary to choose a balance between resolution and a loading capacity of at least 1 g per separation for the selected solvent system (SS). Adding 3 mL of DMSO to the sample containing equal amounts of upper and lower phases of hexanes-ethyl acetate-methanol-water (HEMWat 5.5/4.5/5/5, v/v) allowed 1 g of RCE to be dissolved in the sample without disrupting the chromatographic resolution of the target isoflavones. CPC experiments using other solubility modifiers, acetone and acetonitrile indicated that these modifiers increase solubility significantly, even better than DMSO, but the separation of target compounds was sufficiently disturbed to be unacceptable for producing the desired DESIGNER extracts. The preparation of DESIGNER extracts was achieved with two sequential CPC separations. The first produced a biochanin A enriched fraction (93.60% w/w) with only small amounts of other isoflavones: 2.30% w/w prunetin, 1.17% w/w formononetin, and 0.12% w/w irilone. Gravimetric investigations of this step demonstrated the high efficiency of CCS technology for full and unbiased sample recovery, confirmed experimentally to be 99.80%. A formononetin enriched fraction from this first separation was re-chromatographed on a more polar HEMWat (4/6/4/6, v/v) SS to produce a formononetin enriched DESIGNER fraction of 94.70% w/w purity. The presence of the minor (iso)flavonoids: 3.16% w/w pseudobaptigenin, 0.39% w/w kaempferol, and 0.31% w/w genistein was also monitored in these fractions. Chromatographic fractions, combined fractions, and DESIGNER extracts were analyzed with quantitative ¹H NMR (qHNMR) spectroscopy which provided purity information, quantitation, and structural identification of the components.

Separation of six compounds from pigeon pea leaves by elution-extrusion counter-current chromatography

A valid and reliable method was established to separate six compounds from pigeon pea leaves via elution-extrusion counter-current chromatography. A solvent system composed of n-hexane/methanol/formic acid aqueous solution with pH = 3 (10:6:4, v/v) was screened to achieve satisfactory isolation from the ethanol extract of pigeon pea leaves. Four compounds, 9.2 mg of compound 1 (96.8%), 3.2 mg of 2 (88.0%), 6.2 mg of 4 (94.2%) and 25.2 mg of 5 (94.2%), were obtained by conventional elution from 100 mg of the precipitation fraction, respectively. Two compounds, 14.4 mg of 3 (96.3%) and 28.1 mg of 6 (96.6%), with high K values were obtained by the subsequent extrusion procedure. The compounds 1-6 were identified as 3-methoxy-5-(2-phenylethenyl)-phenol, pinostrobin chalcone, pinostrobin, 2-hydroxy-4-methoxy-6-(2-phenylvinyl)-benzoic acid, longistylin C and cajaninstilbene acid by quadrupole time-of-flight mass spectrometry, and 1 H and 13 C NMR spectroscopy. The in vitro antiproliferation activities of compounds 1, 5 and 6 against human hepatoma cell were evaluated and the half-maximum inhibitory concentrations were acquired.

Counter-current chromatography melamine-modified column and its separation mechanism

In this work, to further verify and develop the novel counter-current chromatography modified column separate mode, a melamine modified counter-current chromatography column was prepared. Meanwhile, the modified counter-current chromatography column was used to separate stevioside and rebaudioside A with the same partition coefficient in chosen solvent system to evaluate its separation efficiency. The results show that because of the presence of intermolecular forces between melamine and model compounds, better separation could be achieved on the modified column while it's almost impossible to be separated on the unmodified column. So the results of this research further show that column modified method is a possible approach to further increase the separation ability of counter-current chromatography. Take advantage of large sample handing capacity of counter-current chromatography, the mothed may have great potential to be an efficient method of separation and preparation enantiomer compounds.

Concentrical coils counter-current chromatography for natural products isolation: Salvia miltiorrhiza Bunge as example

Countercurrent chromatography (CCC) is an efficient separation technique without the solid support matrix, largely depending on the partition of two-immiscible liquid phases in the separation column. Since the helical coil planet centrifuge was invented in early 1970s by Yoichiro Ito, a series of coils columns, including spiral coils and conical coils columns have been developed for CCC separation. In this work, we introduced a new simple and efficient concentrical coils column for CCC separation, which was prepared by winding the whole polytetrafluoroethylene (PTFE) tube into the circular grooves from the rotation axis in the same direction. Once the PTFE tube filled in all space of one round of the circular groove, it was jumped into the nearby outer circular groove through the gap and until the whole groove was filled. The three same concentrical coils distributed on three disc-shaped holders were connected by the same PTFE tube to form concentrical coils separation column. The separation capacity was further investigated using ten tanshinones of the extracts of a Traditional Chinese Medicine Salvia miltiorrhiza Bunge as a model natural product. All results indicated that the concentrical coils column could hold satisfactory retention of the stationary phase, higher theoretical plate number and better resolution for CCC separation of more than ten tanshinones. It may be an alternative CCC column for non-targeted and targeted isolation of bioactive natural products.

Sugaring-out strategy for counter-current chromatography isolation: podophyllotoxins and flavones from Dysosma versipellis as examples

In this work, we introduced a sugaring-out strategy for optimizing two-phase solvent systems for counter-current chromatography by adding some sugars into the selected two-phase solvent system.

Tannase-mediated biotransformation assisted separation and purification of theaflavin and epigallocatechin by high speed counter current chromatography and preparative high performance liquid chromatography: A comparative study

A large scale isolation and purification of theaflavin (TF) and epigallocatechin (EGC) has been successfully developed by tannase-mediated biotransformation combining high-speed countercurrent chromatography. After tannase hydrolysis of a commercially available theaflavins extract (TE), the content of TF and EGC in tannase-mediated biotransformation product (TBP) achieved approximately 3 times enrichment. SEM studies revealed smooth tannase biotransformation and the possibility of recovery of the tannase. A single 1.5 hours' HSCCC separation for TF and EGC employing a two-phase solvent system could simultaneously produce 180.8 mg of 97.3% purity TF and 87.5 mg of 97.3% purity EGC. However, a preparative HPLC separation of maximum injection volume containing 120 mg TBP prepared 11.2 mg TF of 94.9% purity and 7.7 mg EGC of 89.9% purity. HSCCC separation demonstrated significant advantages over Prep HPLC in terms of sample loading size, separation time, environmental friendly solvent systems, and the production.

A combination strategy for extraction and isolation of multi-component natural products by systematic two-phase solvent extraction-(13)C nuclear magnetic resonance pattern recognition and following conical counter-current chromatography separation: Podophyllotoxins and flavonoids from Dysosma versipellis (Hance) as examples

Despite of substantial developments of extraction and separation techniques, isolation of natural products from natural resources is still a challenging task. In this work, an efficient strategy for extraction and isolation of multi-component natural products has been successfully developed by combination of systematic two-phase liquid-liquid extraction-(13)C NMR pattern recognition and following conical counter-current chromatography separation. A small-scale crude sample was first distributed into 9 systematic hexane-ethyl acetate-methanol-water (HEMWat) two-phase solvent systems for determination of the optimum extraction solvents and partition coefficients of the prominent components. Then, the optimized solvent systems were used in succession to enrich the hydrophilic and lipophilic components from the large-scale crude sample. At last, the enriched components samples were further purified by a new conical counter-current chromatography (CCC). Due to the use of (13)C NMR pattern recognition, the kinds and structures of major components in the solvent extracts could be predicted. Therefore, the method could collect simultaneously the partition coefficients and the structural information of components in the selected two-phase solvents. As an example, a cytotoxic extract of podophyllotoxins and flavonoids from Dysosma versipellis (Hance) was selected. After the systematic HEMWat system solvent extraction and (13)C NMR pattern recognition analyses, the crude extract of D. versipellis was first degreased by the upper phase of HEMWat system (9:1:9:1, v/v), and then distributed in the two phases of the system of HEMWat (2:8:2:8, v/v) to obtain the hydrophilic lower phase extract and lipophilic upper phase extract, respectively. These extracts were further separated by conical CCC with the HEMWat systems (1:9:1:9 and 4:6:4:6, v/v). As results, total 17 cytotoxic compounds were isolated and identified. In general, whole results suggested that the strategy was very efficient for the systematic extraction and isolation of biological active components from the complex biomaterials.

Countercurrent Separation of Natural Products: An Update

This work assesses the current instrumentation, method development, and applications in countercurrent chromatography (CCC) and centrifugal partition chromatography (CPC), collectively referred to as countercurrent separation (CCS). The article provides a critical review of the CCS literature from 2007 since our last review (J. Nat. Prod. 2008, 71, 1489-1508), with a special emphasis on the applications of CCS in natural products research. The current state of CCS is reviewed in regard to three continuing topics (instrumentation, solvent system development, theory) and three new topics (optimization of parameters, workflow, bioactivity applications). The goals of this review are to deliver the necessary background with references for an up-to-date perspective of CCS, to point out its potential for the natural product scientist, and thereby to induce new applications in natural product chemistry, metabolome, and drug discovery research involving organisms from terrestrial and marine sources.

A novel 9 × 9 map-based solvent selection strategy for targeted counter-current chromatography isolation of natural products

Counter-current chromatography (CCC) is an efficient liquid-liquid chromatography technique for separation and purification of complex mixtures like natural products extracts and synthetic chemicals. However, CCC is still a challenging process requiring some special technical knowledge especially in the selection of appropriated solvent systems. In this work, we introduced a new 9 × 9 map-based solvent selection strategy for CCC isolation of targets, which permit more than 60 hexane-ethyl acetate-methanol-water (HEMWat) solvent systems as the start candidates for the selection of solvent systems. Among these solvent systems, there are clear linear correlations between partition coefficient (K) and the system numbers. Thus, an appropriate CCC solvent system (i.e., sweet spot for K = 1) may be hit by measurement of k values of the target only in two random solvent systems. Besides this, surprisingly, we found that through two sweet spots, we could get a line ("Sweet line") where there are infinite sweet solvent systems being suitable for CCC separation. In these sweet solvent systems, the target has the same partition coefficient (K) but different solubilities. Thus, the better sweet solvent system with higher sample solubility can be obtained for high capacity CCC preparation. Furthermore, we found that there is a zone ("Sweet zone") where all solvent systems have their own sweet partition coefficients values for the target in range of 0.4 < K< 2.5 or extended range of 0.25 < K < 16. All results were validated by using 14 pure GUESSmix mimic natural products as standards and further confirmed by isolation of several targets including honokiol and magnolol from the extracts of Magnolia officinalis Rehd. Et Wils and tanshinone IIA from Salvia miltiorrhiza Bunge. In practice, it is much easier to get a suitable solvent system only by making a simple screening two to four HEMWat two-phase solvent systems to obtain the sweet line or sweet zone without special knowledge or comprehensive standards as references. This is an important advancement for solvent system selection and also will be very useful for isolation of current natural products including Traditional Chinese Medicines.

Separation and purification of bioactive botrallin and TMC-264 by a combination of HSCCC and semi-preparative HPLC from endophytic fungus Hyalodendriella sp. Ponipodef12

Two dibenzo-α-pyrones, botrallin (1) and TMC-264 (2) were preparatively separated from crude ethyl acetate extract of the endophytic fungus Hyalodendriella sp. Ponipodef12, which was isolated from the hybrid 'Neva' of Populus deltoides Marsh × P. nigra L. using a combination of high-speed counter-current chromatography (HSCCC) and semi-preparative HPLC. Botrallin (1) with 74.73% of purity and TMC-264 (2) with 82.29% of purity were obtained through HSCCC by employing a solvent system containing n-hexane-ethyl acetate-methanol-water at a volume ratio of 1.2:1.0:0.9:1.0. It was the first time for TMC-264 (2) to be isolated from this fungus. TMC-264 (2) showed strong antimicrobial and antinematodal activity, and botrallin (1) exhibited moderate inhibitory activity on acetylcholinesterase.

Simultaneous preparation of naturally abundant and rare catechins by tannase-mediated biotransformation combining high speed counter current chromatography

Simultaneous preparation of naturally rare catechins, EGC and EC, has been realized by tannase-mediated biotransformation combining high speed counter current chromatography. In addition, simultaneous preparation of the four catechins, EGCG, ECG, EGC, and EC in green tea extract has also been achieved by HSCCC under the normal phase and the reversed phase modes. The identity of the catechins was determined by HPLC-DAD-ESI-MS and quantification of the catechins was performed by HPLC-DAD. In a typical HSCCC separation, 27.2 mg 98.8% EGCG, 14.1 mg 94.7% EGC, and 9.3 mg 97.5% EC were obtained. This new method is efficient, time-saving and valuable for biological studies.

Conical coils counter-current chromatography for preparative isolation and purification of tanshinones from Salvia miltiorrhiza Bunge

Modern counter-current chromatography (CCC) originated from the helical coil planet centrifuge. Recently, spiral coils were found to possess higher separation efficiency in both the retention of stationary phase and solutes resolution than other CCC coils like the helical and toroidal coils used on type-J CCC and cross-axis CCC. In this work, we built a novel conical coil CCC for the preparative isolation and purification of tanshinones from Salvia miltiorrhiza Bunge. The conical coils were wound on three identical upright tapered holders in head-to-tail and left-handed direction and connected in series. Compared with helical and spiral coil CCC, conical coil CCC not only placed CCC column in a two-dimensional centrifugal field, but also provided a potential centrifugal force gradient both in axial and radial directions. The extra centrifugal gradient made mobile phase move faster and enabled CCC much higher retention of stationary phase and better resolution. As a result, higher efficiency has been obtained with the solvent system of hexane-ethyl acetate-methanol-water (HEMWat) with the volume ratio of 5:5:7:3 by using conical coil CCC apparatus. Four tanshinones, including cryptotanshinone (1), tanshinone I (2), 1,2-dihydrotanshinquinone (3) and tanshinone IIA (4), were well resolved from 500mg to 1g crude samples with high purity. Furthermore, the conical coil CCC can make a much higher solid phase retention, which makes it to be a powerful separation tool with high throughput. This is the first report about conical coil CCC for separation of tanshinones and it may also be an important advancement for natural products isolation.

State-of-the-art separation of ginsenosides from Korean white and red ginseng by countercurrent chromatography

Ginseng (Panax ginseng C. A. Meyer) has been one of the most popular herbs used for nutritional and medicinal purposes by the people of eastern Asia for thousands of years. Ginsenosides, the mostly widely studied chemical components of ginseng, are quite different depending on the processing method used. A number of studies demonstrate the countercurrent chromatography (CCC) separation of ginsenosides from several sources; however, there is no single report demonstrating a one-step separation of all of these ginsenosides from different sources. In the present study, we have successfully developed an efficient CCC separation methodology in which the flow-rate gradient technique was coupled with a new solvent gradient dilution strategy for the isolation of ginsenosides from Korean white (peeled off dried P. ginseng) and red ginseng (steam-treated P. ginseng). The crude samples were initially prepared by extraction with butanol and were further purified with CCC using solvent gradients composed of methylene chloride-methanol-isopropanol-water (different ratios, v/v). Gas chromatography coupled with flame ionization detector was used to analyze the components of the two-phase solvent mixture. Each phase solvent mixture was prepared without presaturation, which saves time and reduces the solvent consumption. Finally, 13 ginsenosides have been purified from red ginseng with the new technique, including Rg1, Re, Rf, Rg2, Rb1, Rb2, Rc, Rd, Rg3, Rk1, Rg5, Rg6, and F4. Meanwhile, eight ginsenosides have been purified from white ginseng, including Rg1, Re, Rf, Rh1, Rb1, Rb2, Rc, and Rd by using a single-solvent system. Thus, the present technique could be used for the purification of ginsenosides from all types' ginseng sources. To our knowledge, this is the first report involving the separation of ginsenoside Rg2 and Rg6 and the one-step separation of thirteen ginsenosides from red ginseng by CCC.