Porous polymer monoliths: Morphology, porous properties, polymer nanoscale gel structure and their impact on chromatographic performance

Effect of crosslinker/porogen ratio on sponge-nested polymer monoliths for solid-phase extraction

Polymer monoliths can be polymerised within different molds, but limited options are available for the preparation of free-standing polymer monoliths for analytical sample preparation, and in particular, solid-phase extraction (SPE). Commercial melamine-formaldehyde sponges can be used as supports for the preparation of polymer monoliths, due its flexibility, giving various shapes to monoliths. Herein, the crosslinker/porogen ratio of highly porous sponge-nested divinylbenzene (DVB) polymer monoliths has been evaluated. Monoliths prepared using different crosslinker/porogen ratios were applied to the extraction of bisphenol F, bisphenol A, bisphenol AF, and bisphenol B. Monoliths containing 50 wt % DVB and 50 wt % porogens presented the highest recovery of bisphenols. Under the optimised conditions, the developed method showed a linear range between 2.5 µg L-1 and 150 µg L-1 for BPA and BPAF, and between 5 µg L-1 and 150 µg L-1 for BPB and BPF. The limits of detection (LOD, S/N = 3) and limits of quantification (LOQ, S/N = 10) ranged from 0.36 µg L-1 to 1.09 µg L-1, and from 1.20 µg L-1 to 3.65 µg L-1, respectively. The recoveries for spiked bisphenols (10 µg L-1) in tap water and water contained in a polycarbonate containers were between 82 % and 114 %.

A protocol for fabrication of polymer monolithic capillary columns and tuning the morphology targeting high-resolution bioanalysis in gradient-elution liquid chromatography

Polymer monolithic stationary phases are designed as a continuous interconnected globular material perfused by macropores. Like packed column, where separation efficiency is related to particle diameter, the efficiency of monoliths can be enhanced by tuning the size of both the microglobules and macropores. This protocol described the synthesis of poly(styrene-co-divinylbenzene) monolithic stationary phases in capillary column formats. Moreover, guidelines are provided to tune the macropore structure targeting high-throughput and high-resolution monolith chromatography. The versatility of these columns is exemplified by their ability to separate tryptic digests, intact proteins, and oligonucleotides under a variety of chromatographic conditions. The repeatability of the presented column fabrication process is demonstrated by the successful creation of 12 columns in three different column batches, as evidenced by the consistency of retention times (coefficients of variance [c.v.] = 0.9%), peak widths (c.v. = 4.7%), and column pressures (c.v. = 3.1%) across the batches.

Continuous multi-membrane chromatography of large viral particles

Continuous multi-column chromatography (CMCC) has been successfully implemented to address biopharmaceutical biomolecule instability, to improve process efficiency, and to reduce facility footprint and capital cost. This paper explores the implementation of a continuous multi-membrane chromatography (CMMC) process, using four membrane units, for a large viral particle in just few weeks. CMMC improves the efficiency of the chromatography step by enabling higher loads with smaller membranes for multiple cycles of column use and enables steady-state continuous bioprocessing. The separation performance of CMMC was compared to a conventional batch chromatographic capture step used at full manufacturing scale. The product step yield was 80% using CMMC versus 65% in batch mode while increasing slightly the relative purity. Furthermore, the total amount of membrane area required for the CMMC approach was approximately 10% of the area needed for batch operation, while realizing similar processing times. Since CMMC uses smaller membrane sizes, it can take advantage of the high flow rates achievable for membrane chromatography that are not typically possible at larger membrane scales due to skid flow rate limitations. As such, CMMC offers the potential for more efficient and cost-effective purification trains.

Ethane-Bridged Hybrid Monolithic Column with Large Mesopores for Boosting Top-Down Proteomic Analysis

Top-down proteomics is challenged by the high complexity of biological samples. The coelution of intact proteins results in overlapped mass spectra, and hence, an increased peak capacity for protein separation is needed. Herein, ethane-bridged hybrid monoliths with well-defined large mesopores were successfully prepared based on the sol-gel condensation of 1,2-bis(trimethoxysilyl)ethane and tetramethoxysilane, followed by two-step base etching of the Si-O-Si domain while maintaining the Si-C-C-Si domain in the structure. Relatively homogeneous macropores of 1.1 μm and large mesopores of 24 nm were obtained, permitting fast mass transfer of large molecules and efficient diffusion without obstruction. The use of less hydrophobic C1 ligand further sharpened the peak shape and improved peak capacity. A 120 cm-long capillary column was used for top-down proteomic analysis of E. coli lysates under low backpressure with 16 MPa. High peak capacity of 646 was achieved within 240 min gradient. With MS/MS analysis, 959 proteoforms corresponding to 263 proteins could be unambiguously identified from E. coli lysates in a single run. Furthermore, to illustrate the separation performance for large proteoforms, such monoliths were applied to top-down analysis of the SEC fraction of E. coli lysates with Mw ranging from 30 to 70 kDa. With highly effective separation, 347 large proteoforms with Mw higher than 30 kDa were detected in the single 75 min run. These results showed great potential for top-down proteomic analysis in complex samples.

Hydrogel Adsorbents for the Removal of Hazardous Pollutants—Requirements and Available Functions as Adsorbent

Over the last few decades, various adsorption functions of polymer hydrogels for the removal of hazardous pollutants have been developed. The performance of hydrogel adsorbents depends on the constituents of the gels and the functions produced by the polymer networks of the gels. Research on hydrogels utilizing the characteristic functions of polymer networks has increased over the last decade. The functions of polymer networks are key to the development of advanced adsorbents for the removal of various pollutants. No review has discussed hydrogel adsorbents from the perspective of the roles and functions of polymer networks in hydrogels. This paper briefly reviews the basic requirements of adsorbents and the general characteristics of hydrogels as adsorbents. Thereafter, hydrogels are reviewed on the basis of the roles and functions of the polymer networks in them for the removal of hazardous pollutants by introducing studies published over the last decade. The application of hydrogels as adsorbents for the removal of hazardous pollutants is discussed as well.

Recent Advances in Solid-Phase Extraction as a Platform for Sample Preparation in Biomarker Assay

Low levels of biomarkers and the complexity of bio sample make the analytical assay of several biomarkers a challenging issue. Suitable sample preparation run remain a vital part of the puzzle of diagnostic level. Enhancing the detection limit of bioanalytical methods start during the sample preparation procedure. A robust sample preparation method is needed to evaluate the number of biomarkers. As worldwide environmental issues attract expanding consideration, all the more harmless to the ecosystem investigations are liked. Solid-phase extraction (SPE) is an appealing strategy among the sample treatment methods due to the versatility of sorbent materials, less solvent consumption, and compatibility with analytical devices. Miniaturization of the SPE gives the chance to integrate the other analytical steps in a single run, known as an easy-to-use and effective method. SPE utilizes various SPE sorbent beds such as packed beads, porous polymer monoliths, molecularly imprinted polymers, membranes, or other magnetic form microstructures to achieve high surface-to-volume ratio and appropriate chemical properties effective extraction. Also, SPE is the methodology of interest to fulfill high recovery and efficiency demands. In this review, we intend to explain more recent methods for the rational design of SPE and miniaturized SPE to determine biomarkers from biological media. The headlines are subdivided into (1) packing materials in SPE, (2) setups for sample preparation by magnetic SPE, and (3) and future perspective for the application of SPE in sample preparation for analysis of biomarkers.

One-Pot Fabrication of Hierarchically Bicontinuous Polystyrene Monoliths with Homogeneous Skeletons and Glycopolymer Surfaces

The hierarchically bicontinuous polystyrene monoliths (HBPMs) with homogeneous skeletons and glycopolymer surfaces are fabricated for the first time based on the medium internal phase emulsion (MIPE) templating method via activator generated by electron transfer for atom transfer radical polymerization (AGET ATRP). The synergistic self-assembly of amphiphilic diblock glycopolymer (ADG) and Pluronic F127 (PF127) at the oil/water interface via hydrogen bonding interaction contributes to the formation of bicontinuous MIPE with deformed neighboring water droplets, resulting in the highly interconnected HBPM after polymerization. There is a bimodal pore size distribution in the HBPM, that is, through pores (150-5000 nm) and mesopores (10-150 nm). The HBPMs as prepared show excellent biocompatibility, homogeneous skeletons, strong mechanical strength, and high bed permeability, overcoming the practical limitations of the second generation of polystyrene (PS) monoliths. Glycoprotein concanavalin A (Con A) can be easily and quickly separated by the HBPM in hydrophilic interaction chromatography (HILIC) mode. These results suggest the HBPMs have great potentials in catalysis, separations, and biomedical applications.

Purification of guanine-quadruplex using monolithic stationary phase under ion-exchange conditions

The current study investigates a method for purification of the G-quadruplex secondary structure, naturally formed by a guanine-rich 21-mer oligonucleotide strand using a monolithic convective interaction media-quaternary amine (CIM-QA) column under ion-exchange conditions. The monolithic support was initially evaluated on a preparative scale against a highly efficient TSKgel SuperQ-5PW ion-exchange support designed for oligonucleotide purification. The CIM analogue demonstrated clear advantages over the particle-based support on the basis of rapid separation times, while also affording high purity of the G-quadruplex. Various parameters were investigated including the type of mobile phase anion, cation, pH and injection load to induce and control quadruplex formation, as well as enhance chromatographic separation and final purity. Potassium afforded the most prominent quadruplex formation, yet sodium allowed for the highest resolution and purity to be achieved with a 30 mg injection on an 8 ml CIM-QA monolithic column. This method was applied to purify in excess of 300 mg of the quadruplex, with excellent retention time precision of under 1% RSD. Native mass spectrometry was utilized to confirm the identity of the intact G-quadruplex under non-denaturing conditions, while ion-pairing reversed-phase methods confirmed the presence of the single-stranded oligonucleotide in high purity (92%) under denaturing conditions. The key advantage of the purification method enables isolation of the G-quadruplex in its native state on a milli-gram scale, allowing structural characterization to further our knowledge of its role and function. The G-quadruplex can also be subsequently denaturated at elevated temperature causing single strand formation if additional reactions are to be pursued, such as annealing to form a duplex, and evaluation in in vitro or in vivo studies.

Determination of trace hydroxyl polycyclic aromatic hydrocarbons in urine using graphene oxide incorporated monolith solid-phase extraction coupled with LC-MS/MS

The biomonitoring of hydroxy polycyclic aromatic hydrocarbons in urine, as a direct way to access multiple exposures to polycyclic aromatic hydrocarbons, has raised great concerns due to their increasing hazardous health effects on humans. Solid-phase extraction is an effective and useful technique to preconcentrate trace analytes from biological samples. Here, we report a novel solid-phase extraction method using a graphene oxide incorporated monolithic syringe for the determination of six hydroxy polycyclic aromatic hydrocarbons in urine coupled with liquid chromatography-tandem mass spectrometry. The effect of graphene oxide amount, washing solvent, eluting solvent, and its volume on the extraction performance were investigated. The fabricated monoliths gave higher adsorption efficiency and capacity than the neat polymer monolith and commercial C₁₈ sorbent. Under the optimum conditions, the developed method provided the detection limits (S/N = 3) of 0.02-0.1 ng/mL and the linear ranges of 0.1-1500 ng/mL for six analytes in urine sample. The recoveries at three spiked levels ranged from 77.5 to 97.1%. Besides, the intra column-to-column (n = 3) and inter batch-to-batch (n = 3) precisions were ≤ 9.8%. The developed method was successfully applied for the determination of hydroxy polycyclic aromatic hydrocarbons in urine samples of coke oven workers.

Fast fabrication of a hybrid monolithic column containing cyclic and aliphatic hydrophobic ligands via photo-initiated thiol-ene polymerization

Three monomers, octakis (3-mercaptopropyl) octasilsesquioxane, 1,2,4-trivinylcyclohexane and isophytol were employed to synthesize a novel monolithic stationary phase via photo-initiated thiol-ene click polymerization for reversed-phase liquid chromatography. Several factors such as porogenic system, reaction time and the molar ratio of functional groups were investigated in detail. The resulting poly(POSS-co-TVCH-co-isophytol) monolithic column exhibited suitable permeability for fast separation and outstanding thermal stability. Five alkylbenzenes were employed to evaluate the ability of chromatographic separation of the resulting monolithic columns at different flow rates, and showed the highest column efficiencies of 90,200-93,100 N/m (corresponding to 10.4-10.6 μm of plate height) at a velocity of 0.41 mm/s. The baseline separations of five anilines and eight phenols further proved the applicability of poly(POSS-co-TVCH-co-isophytol) monolithic column in the separation of small molecules.

Improving Fractionation of Human Milk Proteins through Calcium Phosphate Coprecipitation and Their Rapid Characterization by Capillary Electrophoresis

This work describes a simple sample pretreatment method for the fractionation of human milk proteins (into their two main groups, whey and caseins) prior to their analysis. The protein-extraction protocol is based on the addition of calcium phosphate to nonadjusted pH human milk. The combination of calcium ions with phosphate results in an effective coprecipitation of caseins. To assess the suitability of this fractionation protocol, the protein extracts were analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), LC-MS/MS, and capillary electrophoresis (CE) analysis. The results evidence a significant decrease in contamination of casein fraction with whey proteins and vice versa compared with the conventional isoelectric precipitation of caseins. In addition, CE fraction collection coupled to LC-MS/MS (off-line coupling) has been successfully applied to the identification of minor proteins in this complex matrix. The methodology presented here constitutes a promising tool to enlarge the knowledge of human milk proteome.

Thiol-radical-mediated polymerization for preparation of POSS-containing polyacrylate monoliths in capillary liquid chromatography

Through introducing octakis (3-mercaptopropyl) octasilsesquioxane (POSS-SH) synthesized in our lab to the prepolymerization solution containing stearyl acrylate (SA), 1,6-hexanediol ethoxylate diacrylate (HEDA) in the existence of porogenic solvents (tetrahydrofuran, 1,4-butanediol and 1-propanol), a POSS-containing hybrid monolithic column was fabricated via photo-initiated thiol-acrylate polymerization within 7 min. The resulting poly(SA-co-HEDA-co-POSS) monoliths were investigated by physical characterization and chromatographic evaluation. It was found that both the additive amount of thiol group and the proportion of porogenic solvents played vital effect on column efficiency, pore morphology and hydrophobicity of monolithic columns. Consequently, the poly(SA-co-HEDA-co-POSS) monolith possessed superior thermal stability, suitable permeability and homogeneous microstructure. The highest column efficiency was ∼111,000 N m^-1 for butylbenzene at the linear velocity of 0.71 mm s^-1 in reversed-phase liquid chromatography. Subsequently, baseline separations of 9 phenolic compounds, 5 anilines and 5 antibiotics were achieved, indicating the monolithic poly(SA-co-HEDA-co-POSS) column had great ability for separation of small molecules. The analytic results of the tryptic digest of BSA and HeLa were also proved that the hybrid monolith had potential for the analysis of complicated biological samples.

Sequence-specific sepsis-related DNA capture and fluorescent labeling in monoliths prepared by single-step photopolymerization in microfluidic devices

Fast determination of antibiotic resistance is crucial in selecting appropriate treatment for sepsis patients, but current methods based on culture are time consuming. We are developing a microfluidic platform with a monolithic column modified with oligonucleotides designed for sequence-specific capture of target DNA related to the Klebsiella pneumoniae carbapenemase (KPC) gene. We developed a novel single-step monolith fabrication method with an acrydite-modified capture oligonucleotide in the polymerization mixture, enabling fast monolith preparation in a microfluidic channel using UV photopolymerization. These prepared columns had a threefold higher capacity compared to monoliths prepared in a multistep process involving Schiff-base DNA attachment. Conditions for denaturing, capture and fluorescence labeling using hybridization probes were optimized with synthetic 90-mer oligonucleotides. These procedures were applied for extraction of a PCR amplicon from the KPC antibiotic resistance gene in bacterial lysate obtained from a blood sample spiked with E. coli. The results showed similar eluted peak areas for KPC amplicon extracted from either hybridization buffer or bacterial lysate. Selective extraction of the KPC DNA was verified by real time PCR on eluted fractions. These results show great promise for application in an integrated microfluidic diagnostic system that combines upstream blood sample preparation and downstream single-molecule counting detection.

3-Dimensional X-ray microtomography methodology for characterization of monolithic stationary phases and columns for capillary liquid chromatography - A tutorial

In this tutorial we describe a fast, nondestructive, three-dimensional (3-D) view approach to be used in morphology characterization of capillary monoliths and columns by reconstruction from X-ray microtomography (XMT) obtained by acquiring projection images of the sample from a number of different directions. The method comprises imaging acquisition, imaging reconstruction using specific algorithms and imaging analysis by generation of a 3-D image of the sample from radiographic images. The 3-D images show the morphological data for bulk macropore space and skeleton connectivity of the monoliths and were compared with other images from imaging techniques such as scanning electron microscopy (SEM) and field emission scanning electron microscopy (FESEM) and with chromatographic performance. The 3-D XMT methodology is applicable for organic and inorganic capillary chromatographic monolithic materials and it allows the acquisition of many hundreds (in our case 1001 projections) of longitudinal and cross-sectional images in a single session, resolving morphological details with a 3D-view of the monolithic structure, inclusive inside the column in a sectional structure with volume (three dimensions) when compared to the sectional structure area (with only two dimensions) when using SEM and FESEM techniques.

Controlled crosslinking of trimethylolpropane trimethacrylate for preparation of organic monolithic columns for capillary liquid chromatography

Organic monolithic columns based on single crosslinking of trimethylolpropane trimethacrylate (TRIM) monomer were prepared in a single step by living/controlled free-radical polymerization. Full optimization of the preparation, such as using different percentages of TRIM and different amounts of radical promoter as well as various porogen solvents were explored. The resulting monolithic columns were characterized by scanning electronic microscopy and nitrogen sorption for structure morphology studies and surface area measurements, respectively. Using capillary liquid chromatography, 150 μm i.d. columns were applied to separate a mixture of small hydrophobic molecules. The results indicated that column performance is highly sensitive to the type and the amount of porogen solvents used in the polymerization mixture composition. Good resolution factors and methylene selectivity were obtained, indicating the promising potential of this material for capillary liquid chromatography separations.

One pot synthesis of carboxyl functionalized-polyhedral oligomeric siloxane based monolith via photoinitiated thiol-methacrylate polymerization for nano-hydrophilic interaction chromatography

A hybrid monolith exhibiting almost retention independent separation performance in hydrophilic interaction chromatography (HILIC) was obtained by one-pot photoinitiated thiol-methacrylate polymerization. Polyhedral oligomeric silsesquioxane containing methacrylate units (POSS-MA) was used as the main monomer and crosslinking agent, together with a hydrophilic ligand with two carboxyl groups, mercaptosuccinic acid (MSA) as the thiol agent and chromatographic ligand. The isocratic separation of nucleosides, nucleotides and organic acids on MSA attached-poly(POSS-MA) monolith was investigated in HILIC mode. The van-Deemter plots for obtained for nucleosides, nucleotides and benzoic acids clearly showed that there were two regions in each graph with two different slopes in the studied range of linear flow rate (i.e. 0.2-4.3mm/s). The slope of plate height-linear velocity curve was so small in the low linear velocity region between 0.2-2.1mm/s while the slope in high linear velocity region between 2.1-4.3mm/s was so higher with respect to the first region. The van-Deemter plots sketched for all analyte grous used in HILIC mode obeyed this tendency Almost "retention independent plate height behavior" was demonstrated in HILIC, using nucleotides, nucleotides or benzoic acids as the analytes in the linear velocity range of 0.2-2.1mm/s. This behavior was explained by the porous structure of the synthesized monolith facilitating the convective transport of analytes. The variation of plate height was not retention-independent within high linear velocity range (>3.2mm/s) when nucleosides were separated in HILIC mode.

Morphological Properties of Methacrylate-Based Polymer Monoliths: From Gel Porosity to Macroscopic Inhomogeneities

Shaping chemical interfaces of hard and soft matter materials into physical morphologies that guarantee excellent transport properties is of central importance for technologies relying on adsorption, separation, and reaction at the interface. Polymer monoliths with a hierarchically structured pore space, for example, are widely used in flow-driven processes, whose efficiency depends on the morphology of the support material over several length scales. Compared with alternative support structures, particularly silica monoliths, polymer monoliths yield lower efficiency, which suggests a suboptimal morphology. Based on physical reconstruction by serial block-face scanning electron microscopy we evaluate the structural features of a methacrylate-based polymer monolith from the pore scale to the column scale. The morphological data reveal a homogeneous polymer skeleton with a solute-impenetrable core-porous shell architecture and a heterogeneous macropore space that suffers from inhomogeneities at the short-range and the transcolumn scale. Although the morphology of the polymer phase is favorable to efficient mass transport, the performance of the polymer monolith is limited by severe transcolumn gradients in macroporosity and macropore size. We propose to overcome these morphological limitations by pursuing a preparation strategy that involves active rather than passive shaping of the macropore space, for example, by using silica monoliths as templating structures for polymer monolith preparation.

Nanoparticle-Directed Metal-Organic Framework/Porous Organic Polymer Monolithic Supports for Flow-Based Applications

A two-step nanoparticle-directed route for the preparation of macroporous polymer monoliths for which the pore surface is covered with a metal-organic framework (MOF) coating has been developed to facilitate the use of MOFs in flow-based applications. The flow-through monolithic matrix was prepared in a column format from a polymerization mixture containing ZnO-nanoparticles. These nanoparticles embedded in the precursor monolith were converted to MOF coatings via the dissolution-precipitation equilibrium after filling the pores of the monolith with a solution of the organic linker. Pore surface coverage with the microporous zeolitic imidazolate framework ZIF-8 resulted in an increase in surface area from 72 to 273 m² g^-1. Monolithic polymer containing ZIF-8 coating was implemented as a microreactor catalyzing the Knoevenagel condensation reaction and also in extraction column format enabling the preconcentration of trace levels of toxic chlorophenols in environmental waters. Our approach can be readily adapted to other polymers and MOFs thus enabling development of systems for flow-based MOF applications.

Polymer brush decorated nanoparticles immobilised on polymer monoliths for enhanced biopolymer elution

Polymer monoliths uniformly covered with polymer brush nanoparticles are fabricated and the elution properties investigated with myoglobin and blue dextran.

Solid supports for extraction and preconcentration of proteins and peptides in microfluidic devices: A review

Determination of proteins and peptides is among the main challenges of today's bioanalytical chemistry. The application of microchip technology in this field is an exhaustively developed concept that aims to create integrated and fully automated analytical devices able to quantify or detect one or several proteins from a complex matrix. Selective extraction and preconcentration of targeted proteins and peptides especially from biological fluids is of the highest importance for a successful realization of these microsystems. Incorporation of solid structures or supports is a convenient solution employed to face these demands. This review presents a critical view on the latest achievements in sample processing techniques for protein determination using solid supports in microfluidics. The study covers the period from 2006 to 2015 and focuses mainly on the strategies based on microbeads, monolithic materials and membranes. Less common approaches are also briefly discussed. The reviewed literature suggests future trends which are discussed in the concluding remarks.

Methacrylate Polymer Monoliths for Separation Applications

This review summarizes the development of methacrylate-based polymer monoliths for separation science applications. An introduction to monoliths is presented, followed by the preparation methods and characteristics specific to methacrylate monoliths. Both traditional chemical based syntheses and emerging additive manufacturing methods are presented along with an analysis of the different types of functional groups, which have been utilized with methacrylate monoliths. The role of methacrylate based porous materials in separation science in industrially important chemical and biological separations are discussed, with particular attention given to the most recent developments and challenges associated with these materials. While these monoliths have been shown to be useful for a wide variety of applications, there is still scope for exerting better control over the porous architectures and chemistries obtained from the different fabrication routes. Conclusions regarding this previous work are drawn and an outlook towards future challenges and potential developments in this vibrant research area are presented. Discussed in particular are the potential of additive manufacturing for the preparation of monolithic structures with pre-defined multi-scale porous morphologies and for the optimization of surface reactive chemistries.

Polystyrene-co-Divinylbenzene PolyHIPE Monoliths in 1.0 mm Column Formats for Liquid Chromatography

The reversed phase liquid chromatographic (RP-HPLC) separation of small molecules using a polystyrene-co-divinylbenzene (PS-co-DVB) polyHIPE stationary phases housed within 1.0 mm i.d. silcosteel columns is presented within this study. A 90% PS-co-DVB polyHIPE was covalently attached to the walls of the column housing by prior wall modification with 3-(trimethoxysilyl) propyl methacrylate and could withstand operating backpressures in excess of 200 bar at a flow rate of 1.2 mL/min. Permeability studies revealed that the monolith swelled slightly in 100% acetonitrile relative to 100% water but could nevertheless be used to separate five alkylbenzenes using a flow rate of 40 µL/min (linear velocity: 0.57 mm/s). Remarkable column-to-column reproducibility is shown with retention factor variation between 2.6% and 6.1% for two separately prepared columns.