Determination of pesticide residues in high oil vegetal commodities by using various multi-residue methods and clean-ups followed by liquid chromatography tandem mass spectrometry

Fully Integrated Recognition and Enrichment Electrospray Ionization Source for High-Sensitivity Mass Spectrometry Determination of Bioamine

The development of a highly specific recognition electrospray ionization source presents a major challenge for achieving rapid ambient mass spectrometry (AMS) detection of trace harmful substances in complex samples. In this study, we constructed a molecular imprinting nanofiber electrospinning membrane-coated steel substrate (MINMCS) based on the electrospinning strategy. This was designed as a highly specific recognition and enrichment electrospray ionization source module for AMS, where the molecular imprinting nanofiber membrane served as an excellent extraction and enrichment layer. The prepared ionization source demonstrated a sufficient loading capacity for three bioamines (BAs): histamine (HIS), tyramine (TYR), and tryptamine (TRY). With simplified sample pretreatment, this ionization source exhibited sensitivity comparable to that of high performance liquid chromatography-mass spectrometry (HPLC-MS/MS). Moreover, the entire analysis process could be completed within 1 min with acceptable recoveries (83.21-101.80%). In brief, this study introduces a new integrated recognition and enrichment electrospray ionization source for the detection of harmful substances such as bioamines, showcasing significant commercial potential for the rapid detection of foodborne harmful compounds.

Liquid-liquid and solid-liquid extractions with low-temperature partitioning - A review

The paper represents the first review of solvent extraction techniques utilizing the low-temperature partitioning/purification (LTP) approach. Initially conceived in the 1960s to purify extracts from fatty matrices, it wasn't until the 2000s that this approach received increasing attention for its efficacy in extracting organic compounds from diverse samples, often without additional cleanup steps. This review covers a brief history and proposes a mechanism for LTP-based solvent extraction. Furthermore, the principal practical issues of the technique are spotlighted, elucidating the factors influencing extraction efficiency. The advantages, limitations, and potential combinations with other extraction techniques of the LTP-based solvent extractions are analyzed. The versatility of the LTP approach is demonstrated by its applications in extracting various compounds from food, environmental, and biological samples, emphasizing its potential for rapid sample preparation with minimal steps, few chemicals, and minimal analyst intervention.

Amino-functional magnetic covalent organic framework as an effective adsorbent for the determination of neonicotinoids in food samples

Recently, covalent organic frameworks have gained popularity in sample pretreatment. However, the application of covalent organic frameworks in the enrichment of hydrophilic compounds remains a challenge. Thus, a functionalized magnetic covalent organic framework equipped with amino groups was constructed using a bottom-up functionalization strategy. Considering the advantages of this novel adsorbent such as high porosity, large adsorption capacity, and hydrophilic surface, a sensitive magnetic solid-phase extraction coupled with high-performance liquid chromatography-tandem mass spectrometry method was established for the effective determination of neonicotinoids. This method exhibited good linearities with correlation coefficients ranging from 0.9983 to 0.9995, low detection limits in the range 0.003-0.009 ng g-1 and 0.001-0.013 ng mL-1, and limits of quantification in the range 0.010-0.031 ng g-1 and 0.004-0.044 ng mL-1. Furthermore, satisfactory repeatability with relative standard deviations ≤ 6.7% and spiked recoveries between 82.3 and 99.8% were obtained. This work not only provided a promising adsorbent for the sensitive determination of trace-level neonicotinoids but also represented a unique insight for effective enrichment of super hydrophilic hazards.

Comprehensive multiresidue chromatographic methods for monitoring pesticides in agricultural areas and corresponding plant protection zones

This article reports a comprehensive analytical method for the identification and quantification of a broad range of pesticides in green plant crops. The sample preparation method for pesticides involved an optimization of the QuEChERS-based extraction protocol, with sample mass, volume of added water, and the type of cleanup sorbent as variables. A sorbent combination based on ENVI-Carb and ChloroFiltr was examined. A highly efficient method was developed for the purification of plant extracts with 900 mg MgSO4, 150 mg PSA, and 15 mg ENVI-Carb at the d-SPE stage, combined with gas chromatography and liquid tandem mass spectrometry for the determination of 197 pesticides in crop plants containing chlorophyll. The method was validated in accordance with the requirements of international guidelines SANTE/11312/2021. The method was applied to quantify pesticide residues in 29 pairs of green crop plants and plants from the corresponding crop protection zone to verify whether the zones are effective barriers to prevent pesticides from penetrating outside agricultural areas. The number and types of agrochemical preparations were chosen by farmers. In total, more than 60 one- and several-component pesticide formulations were applied to the crops included in the study. The pesticide residues were detected in 21 crop samples and 3 samples from protection zones. Epoxiconazole, an active substance that was banned for use in 2021, was found in a spring barley sample. Based on the conducted research, the effectiveness of the protection zones has been clearly demonstrated, and it has been proven that environmental migration of pesticides and unauthorized agricultural practices pose a risk to ecosystems.

Assessing emerging and priority micropollutants in sewage sludge: environmental insights and analytical approaches

The application of sewage sludge (SS) in agriculture, as an alternative to manufactured fertilizers, is current practice worldwide. However, as wastewater is collected from households, industries, and hospitals, the resulting sludge could contaminate land with creeping levels of pharmaceuticals, pesticides, heavy metals, polycyclic aromatic hydrocarbons, and microplastics, among others. Thus, the sustainable management of SS requires the development of selective methods for the identification and quantification of pollutants, preventing ecological and/or health risks. This study presents a thorough evaluation of emerging and priority micropollutants in SS, through the lens of environmental insights, by developing and implementing an integrated analytical approach. A quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction method, coupled with gas chromatography and liquid chromatography, was optimized for the determination of 42 organic compounds. These include organophosphorus pesticides, organochlorine pesticides, pyrethroid pesticides, organophosphate ester flame retardants, polybrominated diphenyl ethers, polychlorinated biphenyls, and polycyclic aromatic hydrocarbons. The optimization of the dispersive-solid phase for clean-up, combined with the optimization of chromatographic parameters, ensured improved sensitivity. Method validation included assessments for recovery, reproducibility, limit of detection (LOD), and limit of quantification (LOQ). Recoveries ranged from 59.5 to 117%, while LODs ranged from 0.00700 to 0.271 µg g-1. Application of the method to seven SS samples from Portuguese wastewater treatment plants revealed the presence of sixteen compounds, including persistent organic pollutants. The quantification of α-endosulfan, an organochlorine pesticide, was consistently observed in all samples, with concentrations ranging from 0.110 to 0.571 µg g-1. Furthermore, the study encompasses the analysis of agronomic parameters, as well as the mineral and metal content in SS samples. The study demonstrates that the levels of heavy metals comply with legal limits. By conducting a comprehensive investigation into the presence of micropollutants in SS, this study contributes to a deeper understanding of the environmental and sustainable implications associated with SS management.

Development of an enhanced analytical method utilizing pepper matrix as an analyte protectant for sensitive GC‒MS/MS detection of dimethipin in animal-based food products

Herein, an analytical method using gas chromatography-tandem mass spectrometry (GC‒MS/MS) was devised to detect the presence of the troublesome pesticide dimethipin in various animal-based food products, including chicken, pork, beef, eggs, and milk. The injection port was primed with a matrix derived from pepper leaves that acts as an analyte protectant (AP) to safeguard the target compound from thermal degradation during gas chromatography. The presence of AP resulted in a remarkable limit of quantification of 0.005 mg/kg for dimethipin in five matrices. Three different versions (original, EN, and AOAC) of the QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) method were compared for dimethipin extraction, with a double-layer solid-phase extraction (SPE) cartridge utilized for matrix purification. A seven-point external calibration curve was established for dimethipin in the five matrices, demonstrating excellent linearity with determination coefficients (R2) ≥ 0.998. The developed quantitative method was validated by fortifying each matrix with three different concentrations of standard dimethipin, and the average recovery fell within the acceptable range outlined in the CODEX guidelines (ranging from 88.8% to 110.0%), with a relative standard deviation (RSD) of ≤ 11.97%. This method effectively addresses the challenge of analyzing dimethipin and can therefore be used as a routine monitoring tool for dimethipin across various matrices.

An effective method for the simultaneous extraction of 173 contaminants of emerging concern in freshwater invasive species and its application

A robust and efficient extraction method was developed to detect a broad range of pollutants of emerging interest in three freshwater invasive species: American red crab (Prokambarus clarkii), Asian clam (Corbicula fluminea), and pumpkinseed fish (Lepomis gibbosus). One native species, "petxinot" clam (Anodonta cygnea), was also evaluated. Invasive species are often more resistant to contamination and could be used in biomonitoring studies to assess the effect of contaminants of emerging concern on aquatic ecosystems while preserving potentially threatened native species. So far, most extraction methods developed for this purpose have focused on analyzing fish and generally focus on a limited number of compounds, especially analyzing compounds from the same family. In this sense, we set out to optimize a method that would allow the simultaneous extraction of 87 PhACs, 11 flame retardants, 21 per- and poly-fluoroalkyl substances, and 54 pesticides. The optimized method is based on ultrasound-assisted solvent extraction. Two tests were performed during method development, one to choose the extraction solvent with the best recovery efficiencies and one to select the best clean-up. The analysis was performed by high-performance liquid chromatography coupled to high-resolution mass spectrometry. The method obtained recoveries between 40 and 120% and relative standard deviations of less than 25% for 85% of the analytes in the four validated matrices. Limits of quantification between 0.01 ng g-1 and 22 ng g-1 were obtained. Application of the method on real samples from the Albufera Natural Park of Valencia (Spain) confirmed the presence of contaminants of emerging concern in all samples, such as acetaminophen, hydrochlorothiazide, tramadol, PFOS, carbendazim, and fenthion. PFAS were the group of compounds with the highest mean concentrations. C. fluminea was the species with the highest detection frequency, and P. clarkii had the highest average concentrations, so its use is prioritized for biomonitoring studies.

Review of scientific literature on available methods of assessing organochlorine pesticides in the environment

Organochlorine pesticides (OCPs) are persistent organic pollutants (POPs) widely used in agriculture and industry, causing serious health and ecological consequences upon exposure. This review offers a thorough overview of OCPs analysis emphasizing the necessity of ongoing work to enhance the identification and monitoring of these POPs in environmental and human samples. The benefits and drawbacks of the various OCPs analysis techniques including gas chromatography-mass spectrometry (GC-MS), gas chromatography-electron capture detector (GC-ECD), and liquid chromatography-mass spectrometry (LC-MS) are discussed. Challenges associated with validation and optimization criteria, including accuracy, precision, limit of detection (LOD), and limit of quantitation (LOQ), must be met for a method to be regarded as accurate and reliable. Suitable quality control measures, such as method blanks and procedural blanks, are emphasized. The LOD and LOQ are critical quality control measure for efficient quantification of these compounds, and researchers have explored various techniques for their calculation. Matrix interference, solubility, volatility, and partition coefficient influence OCPs occurrences and are discussed in this review. Validation experiments, as stated by European Commission in document SANTE/11813/2017, showed that the acceptance criteria for method validation of OCP analytes include ≤20 % for high precision, and 70-120 % for recovery. This may ultimately be vital for determining the human health risk effects of exposure to OCP and for formulating sensible environmental and public health regulations.

Room-temperature synthesis of imine-linked magnetic covalent organic polymers in deep eutectic solvents for the extraction of flavonoids and their determination with HPLC-MS/MS

A novel imine-linked magnetic covalent organic polymer, Fe3O4@TAB-TFPT, was synthesized using environmentally friendly deep eutectic solvents as the reaction medium instead of conventional organic solvents. The materials were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), FT-IR, N2 adsorption-desorption isotherms, energy dispersive spectrometer (EDS), X-ray photoelectron spectra (XPS), and thermo gravimetric analysis (TGA). Subsequently, the materials were employed as an adsorbent for magnetic solid-phase extraction (MSPE) of flavonoids, including Kurarinone, Norkurarinone, Xanthohumol, and Isoxanthohumol, prior to their determination by HPLC-MS/MS. The validation results demonstrate good linearity within the concentration range 0.1-1000 ng∙mL-1 (R2 ≥ 0.9963), high enrichment factors ranging from 18.9 to 30.7, and low LODs (0.01-0.05 ng∙mL-1) and LOQs (0.05-0.1 ng∙mL-1). Furthermore, recoveries between 80.60% and 108.40% with relative standard deviations ≤ 8.49% were achieved. The proposed MSPE-HPLC-MS/MS method was successfully applied to the determination of flavonoids in Sophora flavescens Aition sample.

Multi-Residue Method for Pesticides Determination in Dried Hops by Liquid Chromatography Tandem Mass Spectrometry

In this study a multi-residue determination method for 36 pesticides in dried hops was reported. The sample preparation procedure was based on the acetate buffered QuEChERS method. A few mixtures of dispersive solid phase extraction (dSPE) sorbents consisting PSA, C₁₈, GCB, Z-Sep and Z-Sep+ were investigated to clean-up the supernatant and minimize matrix co-extractives. The degree of clean-up was assessed by gravimetric measurements, which showed the best results for mixtures containing the Z-Sep+ sorbent. This is the first study to apply Z-Sep+ sorbent for hops material and the first to improve the method for pesticide residues determination in hops. Samples were analysed using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) and the procedure was validated according to the SANTE/11813/2017 document at four concentration levels: 0.02, 0.05, 0.1 and 1 mg/kg. The limits of quantification (LOQ) were in the range of 0.02-0.1 mg/kg. For all active substances, the trueness (recovery) ranged from 70 to 120% and the precision (RSD_r) value was <20%. Specificity, linearity and matrix effect were also evaluated. The validated method was applied to the analysis of 15 real dried hop samples and the relevant data on detected residues were included.

Synthesis of a magnetic covalent organic framework for extraction and separation of ultraviolet filters in beverage samples

In this study, a novel magnetic covalent organic framework (Fe₃O₄@TAPB-BTT) was successfully synthesized under mild conditions. The prepared magnetic COF exhibited large surface area (876.3 m² g^-1), porous feature as well as sizeable π-conjugated network structure. Due to the above advantages, Fe₃O₄@TAPB-BTT showed good adsorptive performance for ultraviolet (UV) filters with adsorption capacities ranging from 80.8 to 120.1 mg g^-1. Then the adsorbent was applied to magnetic solid phase extraction (MSPE) of UV filters in beverage samples, followed by UHPLC-MS/MS analysis. The established method showed good accuracy, precision, and reproducibility with satisfactory recoveries (76.9-95.6 %), low limits of detection (0.001-0.15 µg/L), and low relative standard deviations (<9.8 %). Besides, the adsorbent can be reutilized at least ten times, demonstrating satisfactory reusability. This work provided an effective method for the analysis and determination of UV filters in drinks.

LC-MS/MS Method Minimizing Matrix Effect for the Analysis of Bifenthrin and Butachlor in Chinese Chives and Its Application for Residual Study

The matrix effect refers to the change in the analytical signal caused by the matrix in which the sample is contained, as well as the impurities that are co-eluted with the target analyte. In crop sample analysis using LC-MS/MS, the matrix effect can affect the quantification results. Chinese chives are likely to exhibit a strong matrix effect when co-extracted with bifenthrin and butachlor due to the presence of phytochemicals and chlorophyll. A novel analytical method was developed to reduce the matrix effects of bifenthrin and butachlor to a negligible level in Chinese chives. The established method had a limit of quantitation of 0.005 mg/kg and correlation coefficients greater than 0.999 within the range of 0.005-0.5 mg/kg. Matrix effects were found to be negligible, with values ranging from -18.8% to 7.2% in four different sources of chives and two leafy vegetables. Compared to conventional analytical methods for the LOQ and matrix effect, the established method demonstrated improved performances. The analytical method was further applied in a residual study in chive fields. The active ingredient of butachlor 5 granule (GR) was not detected after soil admixture application, while that of bifenthrin 1 emulsifiable concentrate (EC) showed a range from 1.002 to 0.087 mg/kg after foliar spraying. The dissipation rate constant (k) of bifenthrin was determined to be 0.115, thus its half-life was calculated to be 6.0 days. From the results, PHI and safety use standards of both pesticides were suggested. The developed analytical method can be applied to accurately determine bifenthrin and butachlor residues in Chinese chives and provides a foundation for further research on the fate and behavior of these pesticides in the environment.

Residual behavior and dietary risk assessment of albendazole as fungicide in citrus orchards

Albendazole is a broad-spectrum fungicide that shows great potential in controlling fungal diseases in citrus. To quantify the dissipation behavior, residue distribution, and dietary risk of albendazole in citrus, we developed an UPLC-MS/MS analysis protocol. The average recovery rate of albendazole in whole citrus and citrus pulp ranged from 74 to 105% with an RSD of 3 to 8%, and a limit of quantification of 0.01 mg kg^-1. The degradation half-lives were 2.8-3.0 and 5.7-17.0 days in whole citrus and citrus pulp, respectively, and the final residues of albendazole were <0.059 mg kg^-1 with a risk quotient of <1. This study not only demonstrates that the dietary risk of albendazole in citrus is negligible, but also provides empirical data to establish the maximum residual limit (MRL) for the safe application of albendazole in citrus orchards to meet the requirements for food safety as well as international trade.

Determination of methanol-derivatives in drying oils after metal oxide-based dispersive solid phase extraction/QuEChERS clean-up

The determination of secondary volatile degradation products in drying oil extracts is substantial to prevent formation of undesirable metal formates in paintings and/or other artefacts. This study develops a simple, cost-effective, and reliable, high-performance liquid chromatography with diode array detector (HPLC-DAD) method to determine three secondary volatile degradation products (methanol, formaldehyde, and formic acid) in drying oils, including linseed, poppy-seed, and walnut oil. Extraction of analytes was performed using QuEChERS-based procedure followed by metal oxide-based dispersive solid-phase extraction (d-SPE) clean-up and presented a good performance for all of the volatile analytes of interest with recoveries in the range of 90-120% after application of the nanostructured cerium oxide-based (CeO₂) and zirconia-based (ZrO₂) sorbents prepared by favorable and ecological-friendly methods. With a new clean-up solution for samples with high-fat content, it was possible to achieve higher recoveries than with commercial Z-Sep/C18 sorbent. In all cases, relative standard deviations (RSD) of less than 10% were achieved. No significant matrix interference was observed due to the application of effective sorbents in nanostructured form. The developed method was applied to samples of drying oils, and it was found that after storage for three months, all methanol was most likely oxidized to formaldehyde and formic acid. The concentrations of formaldehyde were in the range of 260 - 304 μg∙g^-1, while formic acid concentrations ranged between 72 - 386 μg∙g^-1. The highest concentration of formaldehyde (304 μg∙g^-1) and formic acid (386 μg∙g^-1) was found in linseed oil.

Hydrophilic Covalent Organic Frameworks Coated Steel Sheet As a Mass Spectrometric Ionization Source for the Direct Determination of Zearalenone and Its Derivatives

Zearalenone has attracted worldwide attention due to its toxic properties and threat to public health. A rapid determination method for zearalenone and its derivatives by hydrophilic covalent organic frameworks coated steel sheet (HCOFCS) combined with ambient mass spectrometry (AMS) was developed. The HCOFCS behaved as both a tip for solid-phase microextraction and a solid substrate for electrospray ionization mass spectrometry (ESI-MS). To evaluate the HCOFCS-ESI-MS method, five zearalenone and its derivatives in milk samples were determined, including zearalenone (ZEA), α-zearalenol (α-ZEL), β-zearalenol (β-ZEL), α-zearalanol (α-ZAL), and β-zearalanol (β-ZAL). After the extraction procedure, the HCOFCS was directly added with a high voltage for ESI-MS, and the analysis could be completed within 1 min. The developed method showed good linearity in the range 0.1-100 μg/L with a coefficient of determination (R²) > 0.9991. The limits of detection (LODs) and limits of quantitation (LOQs) ranged from 0.05 to 0.1 and 0.2 to 0.3 μg/L, respectively. The results demonstrated that the HCOFCS combined with ESI-MS can be used for the rapid and sensitive determination of trace ZEA and its derivatives in milk samples with satisfactory recoveries from 80.58% to 109.98% and reproducibility with relative standard deviations (RSDs) no more than 11.18%. Furthermore, HCOFCS showed good reusability, which could reuse at least 10 extraction cycles with satisfactory adsorption performance.

Optimization of an Analytical Method for Indoxacarb Residues in Fourteen Medicinal Herbs Using GC–μECD, GC–MS/MS and LC–MS/MS

Pesticide residue analysis in medicinal herbs is a challenging task because of the matrix effect and its influence on quantitative analysis despite the continuous development of several new analytical methods and instrumentations. In this study, a modified QuEChERS method was developed for the analysis of indoxacarb residue in medicinal herbs by using the conventional instrument, gas chromatography micro-electron-capture-detector (GC–μECD), and comparing it with gas chromatography–tandem mass spectrometry (GC–MS/MS) and liquid chromatography–tandem mass spectrometry (LC–MS/MS). Samples were extracted with acetonitrile and purified using an NH2 cartridge. The optimized method efficiently removes the co-extractives and offered a limit of quantification of 0.01 mg kg−1. The GC–μECD analysis results of indoxacarb in seven medicinal herbs out of fourteen species at a fortification level of 0.01 mg kg−1 showed a recovery range of 79.7–117.6%, while the rest showed recovery > 120%. Similarly, the recovery of indoxacarb by GC and LC–MS/SM were 74.1–105.9 and 73.0–99.0%, respectively, with a relative standard deviation of <20%. Matrix effects for the majority of medicinal herbs analyzed by GC–MS/MS were >±20%. Whereas the results for LC–MS/MS were <20%, which was within the acceptable range according to the SANTE/11312/2021 guidelines. Considering the performance of the method and alignment with the regulatory guidelines, LC–MS/MS is recommended for the analysis of indoxacarb in selected medicinal herbs.

Simultaneous determination of furosemide and carbamazepine in biological matrices by solvent bar microextraction combined with HPLC-DAD and central composite design CCD

A sensitive and simple sample pretreatment method based on a two-phase solvent bar microextraction SBME technique coupled with HPLC-DAD was developed for simultaneous extraction and determination of trace amounts of furosemide and carbamazepine in human urine and plasma samples. The significance of operational factors on carbamazepine and furosemide extraction efficiency % (EE%) was screened using full factorial design (FFD) while central composite design (CCD) was used to model the entire process. A quadratic model was found convenient to correlate the extraction EE% of selected drugs with dominant experimental factors. A Pareto chart was also used to examine the importance of factors on drugs' EE%. The analytical performance of the method in urine and plasma samples demonstrated good linearity R² ˃ 0.992 with detection limits ranging from 4.2 to 10.9 μg L^-1 , and extraction recovery ˃ 89.45% for both drugs in urine and plasma samples. A comparison against published methods was also studied and the results revealed that the developed method exhibits a confident sensitivity, feasible operation, and simple analysis for both drugs. Finally, the practicability of the validated SBME-HPLC-DAD method was demonstrated by successfully applying it to the analysis of furosemide, and carbamazepine in real patient urine samples.

Dissipation rates, residue distribution, degradation products, and degradation pathway of sulfoxaflor in broccoli

Broccoli was selected as the research object in this paper to reveal the dissipation, distribution, and degradation pathway of sulfoxaflor under greenhouse and open-field cultivation conditions for the ecological risk assessment of sulfoxaflor. Results showed that the dissipation of sulfoxaflor in broccoli leaves, flowers, stems, roots, and the whole broccoli was in accordance with the first-order kinetic equation. The sulfoxaflor concentration in broccoli roots reached the maximum value after 1 day of application and then gradually decreased. The degradation half-lives of sulfoxaflor in the roots, leaves, flowers, stems, and whole broccoli were between 2.3 and 19.8 days. The longest degradation half-life of sulfoxaflor was in Heilongjiang under greenhouse cultivation. The terminal residue of sulfoxaflor in broccoli was in the range of 0.005-0.029 mg/kg, and the proportion of sulfoxaflor residue in broccoli leaves was the largest. Thirteen transformation products were separated and identified by ultrahigh-performance liquid chromatography-quadrupole time-of-flight mass spectrometry, and their kinetic evolution was studied. The cleavage of the N = S bond, C-S bond, C-O bond, and cyanide, as well as glucosylation, hydroxylation, SO extrusion, elimination, sulfhydrylation, ketonization, defluorination, and rearrangement, was inferred as the mechanism. Overall, these results can provide guidance for the supervision of the safe application of sulfoxaflor.

Pesticide-Residue Analysis in Soils by the QuEChERS Method: A Review

Pesticides are among the most important contaminants worldwide due to their wide use, persistence, and toxicity. Their presence in soils is not only important from an environmental point of view, but also for food safety issues, since such residues can migrate from soils to food. However, soils are extremely complex matrices, which present a challenge to any analytical chemist, since the extraction of a wide range of compounds with diverse physicochemical properties, such as pesticides, at trace levels is not an easy task. In this context, the QuEChERS method (standing for quick, easy, cheap, effective, rugged, and safe) has become one of the most green and sustainable alternatives in this field due to its inherent advantages, such as fast sample preparation, the minimal use of hazardous reagents and solvents, simplicity, and low cost. This review is aimed at providing a critical revision of the most relevant modifications of the QuEChERS method (including the extraction and clean-up steps of the method) for pesticide-residue analysis in soils.

Optimization and Validation of a Method Based on QuEChERS Extraction and Gas Chromatographic-Mass Spectrometric Analysis for the Determination of Polycyclic Aromatic Hydrocarbons and Polychlorinated Biphenyls in Olive Fruits Irrigated with Treated Wastewaters

The wastewater reuse is an important measure to face water shortage, thus improving the resilience of agricultural production chains. However, treated wastewater can contain residual organic micropollutants residues that may result in crop contamination. Among edible crops, olive is the most important agricultural product in the Mediterranean region. Methods to assess the contamination of organic micropollutants such as polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) in olives are poorly investigated. Given the complexity of olives, this study focused on the development and validation of a method for the simultaneous extraction of PAHs and PCBs from olives, and subsequent analysis by gas chromatography coupled with mass spectrometry detection. Extraction was optimized through a QuEChERS protocol, studying the effect of the extraction solvent (CH2Cl2, cyclohexane, CH3CN) and of the dispersive-solid phase extraction (d-SPE) sorbent (octadecyl silica, Florisil, primary secondary amine, Z-Sep) on the recovery of micropollutants. The best recoveries (94–122%, relative standard deviations below 5%) were obtained using CH3CN/H2O and a double purification step with Z-Sep and Florisil. The method developed for PAHs and PCBs, which showed good intra-day (<2.7%) and inter-day (<2.9%) precision and low matrix effect (|ME| < 14%), was applied to the analysis of olives grown by irrigation with reclaimed wastewaters.

[Determination of bongkrekic acid in tremella and auricularia auricular by improved QuEChERS method combined with ultra-high performance liquid chromatography-triple quadrupole mass spectrometry]

An improved QuEChERS (quick, easy, cheap, effective, rugged, safe) method, combined with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS), was used to determine bongkrekic acid (BA) in tremella and auricularia auricular. BA is a fat-soluble, fatal bacterial toxin produced by the aerobic gram-negative bacteria Burkholderia gladioli pathovar cocovenenans. Tremella and auricularia auricular, which have rich nutritional values, are traditional edible fungi in China that are very popular among Chinese consumers. However, tremella and auricularia auricular are easily contaminated by BA during storage and foaming, and this poses a great threat to food safety and human health. Therefore, establishing a rapid and efficient analysis method for detecting BA in tremella and auricularia auricular is of considerable significance. However, the BA concentration in the actual sample is very low, and the matrices of tremella fuciformis and auricularia auricular are very complex. Thus, it is necessary to employ appropriate sample pretreatment technology to extract and purify BA from tremella and auricularia auricular samples prior to instrumental analysis. In this study, the QuEChERS method, combined with UHPLC-MS/MS, was used to detect BA in tremella and auricularia auricular. The key parameters, such as extraction solvent, extraction method, and adsorbent used for cleanup, were optimized to obtain high extraction efficiency. The content of acetic acid in the extraction solution strongly influenced the extraction efficiency of BA, and acetonitrile with 5%(v/v) acetic acid was determined to be the optimum extraction solvent. After salting out, the acetonitrile extract was purified by dispersive solid phase extraction using 200 mg C18 as a cleanup adsorbent. The sample was then separated on a Waters HSS T3 column (100 mm×2.1 mm, 1.8 μm), using a water solution containing 0.01% (v/v) formic acid and 0.05% (v/v) ammonia and methanol as mobile phases. MS analysis was performed using an electrospray ionization source in the negative and multiple reaction monitoring (MRM) modes. Under the optimized conditions, the matrix effects of UHPLC-MS/MS in tremella and auricularia auricular were -6.3% and -11.5%, respectively; this indicated that the method had a significant purification effect, and the sample matrix did not affect the MS detection of BA. Further study showed that in the concentration range of 1-200 μg/L, the square of the regression coefficient of the linear equation (R²) was greater than 0.999. The limit of detection (LOD) and limit of quantitation (LOQ) were 0.15 μg/kg and 0.5 μg/kg, respectively. The average recoveries in samples spiked with 0.5, 10, and 50 μg/kg BA in tremella ranged from 92.4% to 102.6%, and the intra-day and inter-day relative standard deviations (RSDs) were 4.3%-4.9% and 3.2%-3.5%, respectively. For auricularia auricular, the average recoveries ranged from 89.6% to 102.3%, and the intra-day and inter-day RSDs were 2.4%-9.5% and 3.6%-4.1%, respectively. These results indicate that the proposed method has satisfactory sensitivity, accuracy, and precision. Finally, the method showed good performance when applied to the analysis of real samples. Compared with other reported methods, the LOD and LOQ of our proposed method were lower, with satisfactory recovery and precision. Taken together, this study provides an effective detection technology for the monitoring and risk control of BA in tremella and auricularia auricular.

Comparison of Different d-SPE Sorbent Performances Based on Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) Methodology for Multiresidue Pesticide Analyses in Rapeseeds

Pesticide extraction in rapeseed samples remains a great analytical challenge due to the complexity of the matrix, which contains proteins, fatty acids, high amounts of triglycerides and cellulosic fibers. An HPLC-MS/MS method was developed for the quantification of 179 pesticides in rapeseeds. The performances of the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method were evaluated using different dispersive solid-phase extraction (d-SPE) sorbents containing common octadecylsilane silica/primary-secondary amine adsorbent (PSA/C18) and new commercialized d-SPE materials dedicated to fatty matrices (Z-Sep, Z-Sep+, and EMR-Lipid). The analytical performances of these different sorbents were compared according to the SANTE/12682/2019 document. The best results were obtained using EMR-Lipid in terms of pesticide average recoveries (103 and 70 of the 179 targeted pesticides exhibited recoveries within 70-120% and 30-70%, respectively, with low RSD values). Moreover, the limits of quantification (LOQ) range from 1.72 µg/kg to 6.39 µg/kg for 173 of the pesticides. Only the recovery for tralkoxydim at 10 μg/kg level was not satisfactory (29%). The matrix effect was evaluated and proved to be limited between -50% and 50% for 169 pesticides with this EMR-Lipid and freezing. GC-Orbitrap analyses confirmed the best efficiency of the EMR-Lipid sorbent for the purification of rapeseeds.

[Determination of 197 pesticide residues in edible vegetable oil by gas chromatography-time-of-flight mass spectrometry]

建立了气相色谱-飞行时间质谱(GC-TOF-MS)同时测定食用植物油中197种农药残留的方法。样品经乙腈超声提取,冷冻除脂,C18和PSA吸附剂共同净化;目标物经HP-5MS UI毛细管柱(30 m×0.25 mm×0.25 μm)分离,电子轰击源电离,全扫描模式采集质谱信息;MassHunter软件对数据进行定性与定量分析,设置精确质量数偏差为±5×10^-5,保留时间偏差为±0.1 min。实验考察了基质效应情况和方法学性能。结果表明,大多数农药表现出基质增强效应,需采用基质标准工作溶液进行定量。在优化的条件下,174种农药定量限可以达到0.01 mg/kg,占全部被测农药的88%,另外23种农药的定量限为0.025~0.1 mg/kg。除联苯的线性范围为2~100 μg/L外,其余农药的线性范围均为定量限~200 μg/L,相关系数(R²)均大于0.99。在3个添加水平(0.1、0.25和0.5 mg/kg)下,有156种农药的回收率为70%~120%,占全部被测农药的79%,有185种农药的相对标准偏差<10%,占全部被测农药的94%。应用该方法对23份市售植物油样品进行了检测,结果在12个样品中检出13种农药。该方法操作简便,一次进样即可实现近200种农药的同时检测,且检测结果的准确度和灵敏度良好,适用于食用植物油中197种农药残留的快速检测。

A global study of pesticides in bees: QuEChERS as a sample preparation methodology for their analysis - Critical review and perspective

To this day, it remains unknown what the cause of decline of honey bee populations is and how to prevent this phenomenon efficiently. Poisonings with pesticides are assumed to be among the main causes for the decline of the honey bee population. Despite the significant progress observed in analytics over recent years, research aimed at improving methods applied in diagnostics of bee poisoning is still in progress. This is no easy task, since determination of the content of trace amounts (often equal to sublethal doses) of a wide range of compounds with diverse physico-chemical properties in honey bee samples with a complex matrix composition poses a serious challenge to modern analytics. This overview is the first to include a comprehensive critical assessment of analytical methods proposed for quantification of pesticides in honey bees over the last decade. Since the QuEChERS method is currently of great significance to ensuring accurate and reliable results of pesticide quantification in honey bees, the present overview focuses on the major aspects of this method, which will provide a comprehensive reference for scientists. The review focuses on the limitations of methods and on potential future prospects. It also contains information on the detection of pesticides in honey bees between 2010 and 2020 and characterizes the pesticide classes which are most toxic to these insects. This is extremely important, not just in the context of understanding the potential adverse impact of pesticides, manifesting as losses in bee colonies; it is also intended to facilitate decision-making in future research related to this difficult yet very important subject.

Rapid Determination of 21 Chinese Domestically Registered Pesticides in Ginseng Using Cleanup Based on Zirconium-Oxide-Modified Silica and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

In this study, an analytical method was developed for the rapid determination of 21 pesticides used in ginseng cultivation. All pesticides covered by this method have been registered by 2020 in China for use on ginseng. The extracts were cleaned up using zirconium-oxide-modified silica (Z-Sep) and primary secondary amine (PSA). The combination of Z-Sep and PSA provided good recovery for all analytes and the cleanest matrix background out of a number of PSA-based sorbent combinations, as indicated by high-performance liquid chromatography (HPLC) and gas chromatography (GC). Instrumental analysis was completed in 5 min using the ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The linearity (r > 0.99) for all analytes was satisfactory over the calibration range of 0.002-0.1 μg mL^-1. Intraday recoveries (n = 5) at ginseng-spiked levels of 0.02, 0.05, 0.1, and 1 mg kg^-1 ranged between 72% and 119%, with the corresponding relative standard deviations (RSDs), were less than 19%, while the interday recoveries (n = 15) ranged between 77% and 103%, and RSDs were less than 22%. Limits of quantitation (LOQs) ranged between 0.02 and 0.05 mg kg^-1 for all 21 pesticides. This is a seminal study using Z-Sep for the efficient cleanup of ginseng samples, and it could present a practical method for future monitoring of pesticide residues in ginseng produced in China.

Validation of a Simple and Reliable Method for the Determination of Aflatoxins in Soil and Food Matrices

Aflatoxins (AFs) are toxic fungal secondary metabolites that are commonly detected in food commodities. Currently, there is a lack of generic methods capable of determining AFs both at postharvest stages in agricultural products and preharvest stages, namely, the agricultural soil. Here, we present a simple and reliable method for quantitative analysis of AFs in soil and food matrices at environmentally relevant concentrations for the first time, using the same extraction procedure and chromatography, either by HPLC-FLD or LC-MS. AFs were extracted from matrices by ultrasonication using an acetonitrile/water mixture (84:16, v + v) without extensive and time-consuming cleanup procedures. Food extracts were defatted with n-hexane. Matrix effects in terms of signal suppression/enhancement (SSE) for HPLC-FLD were within ±20% for all matrices tested. For LC-MS, the SSE values were mostly within ±20% for soil matrices but outside ±20% for all food matrices. The sensitivity of the method allowed quantitative analysis even at trace levels with quantification limits (LOQs) between 0.04 and 0.23 μg kg^-1 for HPLC-FLD and 0.06-0.23 μg kg^-1 for LC-MS. The recoveries ranged from 64 to 92, 74 to 101, and 78 to 103% for fortification levels of 0.5, 5, and 20 μg kg^-1, respectively, with repeatability values of 2-18%. The validation results are in accordance with the quality criteria and limits for mycotoxins set by the European Commission, thus confirming a satisfactory performance of the analytical method. Although reliable analysis is possible with both instruments, the HPLC-FLD method may be more suitable for routine analysis because it does not require consideration of the matrix.

Development and validation of an analytical method for the multiresidue analysis of pesticides in sesame seeds using liquid- and gas chromatography with tandem mass spectrometry

For the first time, an analytical method for the multiresidue analysis of multiclass pesticides in sesame seeds using liquid- and gas chromatography with tandem mass spectrometry (LC-MS/MS and GC-MS/MS) was developed and validated. At first, the sample was comminuted after adding water (1:2 w/v). The sample preparation workflow included acetonitrile extraction, followed by freeze-out of the extract at -80°C with a subsequent cleanup by dispersive solid phase extraction (dSPE) (100 mg of C₁₈ + 150 mg of MgSO₄ for LC-MS/MS and 100 mg of C₁₈ + 25 mg florisil + 150 mg of MgSO₄ for GC-MS/MS). As noted, these cleanup steps were quite effective in removing the fatty co-extractives. The optimised sample preparation method effectively minimised the matrix effects and offered a limit of quantification (LOQ) of 0.01 mg/kg for most compounds. The LC-MS/MS and GC-MS/MS methods were validated at three levels (0.01, 0.02 and 0.05 mg/kg) for 222 and 220 compounds respectively. The method accuracy and precision complied with the performance criteria of the SANTE/12682/2019 analytical quality control procedure. The results of the intra-laboratory (involving six analysts) and inter-laboratory studies (involving eight accredited laboratories) were comparable for all pesticides. Considering its performance efficiency and alignment with the regulatory guidelines, this method can be implemented across the food testing laboratories for the monitoring of pesticide residues in sesame seeds.

Pretreatment and determination methods for benzimidazoles: An update since 2005

Benzimidazoles, commonly used as pesticides and veterinary drugs, have posed a threat to human health and the environment due to unreasonable use and lack of valid regulation. Therefore, an up-to-date and comprehensive summary of the pretreatment and analytical approaches in different substrates is urgently needed. The present review consequently updates and covers various newly developed pretreatment methods (e.g., cationic micellar precipitation, magnetic-solid phase extraction, hollow fiber liquid phase microextraction, disperse liquid-liquid microextraction-solidified floating organic drop, stir cake sorptive extraction, solid phase microextraction method, QuEChERS, and molecular imprinted polymer-based methods) since 2005. The review also elaborates and discusses different determination methods (e.g., newly developed HPLC and related methods, improved spectrofluorimetry methods, capillary electrophoresis, and the electrochemical sensor). Furthermore, some critical points and prospects are highlighted, to describe the trends in this area.

Review of sample preparation methods for chromatographic analysis of neonicotinoids in agricultural and environmental matrices: From classical to state-of-the-art methods

This review specifically examines the development of sample preparation methods for residue analyses of neonicotinoid insecticides in agricultural and environmental matrices. Pesticide residue analysis is fundamentally important to ensure the safety of foods and processed foods of plant and animal origin, and to preserve the environment, particularly soil and water. For the development of pesticide residue analysis, the sample preparation process is an important key to maximizing the analytical performance of highly sensitive and accurate chromatographic instruments and to acquiring reliable analytical results. This review outlines sample preparation methods that have been proposed to date for extraction of neonicotinoids that might remain in a complicated sample matrix in quantitatively trace amounts, and for cleaning up, to the greatest extent possible, the interfering components that coexist in the sample extract.

A multi-residue pesticide determination in fatty food commodities by modified QuEChERS approach and gas chromatography-tandem mass spectrometry

A QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) based multi-residue method has been developed and validated for the extraction and determination of pesticides in fatty matrices by gas chromatography tandem mass spectrometry. Extraction and clean-up were performed according to QuEChERS principles widely used for non-fatty matrices, with main difference, a higher solvent/sample- ratio followed by a 6-fold preconcentration step, ensuring good extractability and sensitivity. A validation according to SANTE guidelines was performed using a olive and sunflower oils mixture 1:1, w/w as representative matrix, at 2 concentration levels (5 and 50 µg/kg) targeting 176 GC-amenable pesticides. Most compounds fulfilled the validation criteria, with a limit of quantification of 5 µg/kg for 137 compounds , and of 50 µg/kg for 24 compounds. Afterwards, the method performance was tested in six different fatty matrices with 73-90% of the analytes fulfilling the performance criteria at 5 µg/kg depending on the matrix.

Simultaneous determination of 49 amino acids, B vitamins, flavonoids, and phenolic acids in commonly consumed vegetables by ultra-performance liquid chromatography-tandem mass spectrometry

A sensitive and reliable method was developed and validated for the simultaneous determination of 49 amino acids, B vitamins, flavonoids, and phenolic acids based on a rapid metabolomic extraction procedure combined with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) in a single chromatographic run and applied in analysis of 26 commonly consumed vegetables. The chromatographic and sample preparation conditions were optimized, given the high diversity of the target analytes. Eight isotope-labeled standards were applied to validate the method in terms of recovery, linearity, matrix effects, precision, and sensitivity. Most recoveries in four vegetable matrices ranged from 65.0% to 105.3% with associated RSDs < 20%. Low LOQs ranged from 0.06 to 17 µg/kg. Linear calibration curves with different ranges were established with R² > 0.993. Among the 26 vegetables, purple cabbage, broccoli, and red lettuce were found to contain the highest concentrations of free amino acids, B vitamins, and phenolic compounds.

Development and Application of a Multi-Residue Method to Determine Pesticides in Agricultural Water Using QuEChERS Extraction and LC-MS/MS Analysis

Agricultural water is closely linked to surface and ground water as well as soil; hence, ensuring its safety is an important endeavor. We used the “quick, easy, cheap, effective, rugged, and safe” (QuEChERS) method to analyze multi-residue pesticides in agricultural water by using a combined-sorbent-based clean-up procedure. Among the various sorbents examined, clean-up using ENVI-Carb combined with a primary secondary amine sorbent delivered the highest recovery of multi-residue pesticides (>93.9%). While the developed method showed satisfactory linearity (R2 > 0.9991), precision, and specificity, recovery was low for pyrazolate (29.1%) and thidiazuron (59.2%). The limits of detection and quantification for the 55 pesticides targeted in this study were in 0.02–3.0 μg L−1 and 0.1–9.9 μg L−1, respectively. The developed method was used to identify and quantify multi-residue pesticides during sample analysis. The results suggest that the QuEChERS method employing a combination of ENVI-Carb and another sorbent can be applied for the effective analysis of multi-residue pesticides in agricultural water.

Simultaneous extraction and determination of 45 veterinary antibiotics in swine manure by liquid chromatography-tandem mass spectrometry

A multiresidue method for identification and quantification of 45 veterinary antibiotics (VAs) belonging to 5 different drug classes has been developed, which is the first comprehensive method for pig manure. The proposed method used mixed liquor with methanol: acetonitrile: citrate buffer ratio of 1:1:2 to extract the target VAs from freeze-dried manure. The extracting solution passed through solid-phase extraction (SPE) procedure with Oasis HLB cartridges, which could isolate the target VAs and clean the samples in a single step. After blow-drying and concentrating, the samples were analyzed by ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) in one single injection with a run time of 12 min. The average recovery rates for most of the VAs were in the range of 50-120% with relative standard deviations below 15%. Linearity was studied in the range between 2 and 1000 μg/kg using matrix-matched calibration and pure solvent calibration, to evaluate the matrix effects (MEs). The limits of detection (LDs) and quantification (LQs) were in the range of 0.01-1.54 μg/kg and 0.03-5.13 μg/kg respectively, except for penicillin G. Finally, the proposed method was used to quantify VA residues in real swine manure from three farms with different scales; tetracyclines, sulfonamides, quinolones and macrolides were the most frequently detected compounds.

Improved analysis of propamocarb and cymoxanil for the investigation of residue behavior in two vegetables with different cultivation conditions

BACKGROUND

A modified quick, easy, cheap, effective, rugged and safe (QuEChERS) method was developed for the simultaneous determination of highly water-soluble propamocarb and hydrophobic cymoxanil in potato tuber and tomato fruit. Residue behaviors of the fungicides in open field or greenhouse were investigated for the safety evaluation of these two pesticides, and the effects of cultivation conditions, fungicide exposure and fruit size of tomato on residue level are discussed.

RESULTS

Vegetable samples were extracted with ammonia-acetonitrile, further purified with multiwall carbon nanotubes and analyzed using high-performance liquid chromatography tandem mass spectrometry. The method was validated with fortified samples at different concentration levels (0.05-2.0 mg kg^-1 ). Average recoveries ranged from 84 to 111% with relative standard deviations between 0.3 and 5.5%. Limits of quantification (LOQs) were set at the lowest spiking level of 0.05 mg kg^-1 . In tomato and cherry tomato, initial residue level of cymoxanil was below LOQ at recommended good agricultural practices. Propamocarb residues were affected by the cultivation conditions, with highest levels of 0.52 and 0.72 mg kg^-1 in open field and greenhouse, respectively. In addition, residues of propamocarb in cherry tomatoes were found to be present at 1.25 mg kg^-1 .

CONCLUSIONS

The field trial results showed that propamocarb and cymoxanil residues in potato tubers were below LOQ due to the tubers not being exposed to sprayed pesticides. The unexpected high residue levels in cherry tomato seem to indicate that cherry tomato with small size presents certain accumulative effects of propamocarb. © 2020 Society of Chemical Industry.

Pesticide residues evaluation of organic crops. A critical appraisal

In the last decade, the consumption trend of organic food has increased dramatically worldwide. Since only a few pesticides are authorized in organic crops, concentrations are expected to range at zero or ultra-trace levels. In this context, the aim of the present study was to investigate the need for an improvement in the residue controls at very low concentrations (<0.010 mg kg-1) and to assess the impact of the scope of the analytical methods for this type of crops. For that purpose, a monitoring study for fruit and vegetable samples covering a wide range of pesticides (3 2 8) at low LOQs (0.002-0.005 mg kg-1) was developed. The results showed that the impact of applying analytical methods with low LOQs was not very relevant in the majority of the cases. However, a wide scope presented a high influence on this evaluation, especially regarding the inclusion of very polar compounds and metabolites.

Ultra-High-Performance Liquid Chromatography Coupled with Quadrupole Orbitrap High-Resolution Mass Spectrometry for Multi-Residue Analysis of Mycotoxins and Pesticides in Botanical Nutraceuticals

Cannabidiol (CBD) food supplements made of Cannabis sativa L. extracts have quickly become popular products due to their health-promoting effects. However, potential contaminants, such as mycotoxins and pesticides, can be coextracted during the manufacturing process and placed into the final product. Accordingly, a novel methodology using ultra-high-performance liquid chromatography coupled with quadrupole Orbitrap high-resolution mass spectrometry (UHPLC-Q-Orbitrap HRMS) was developed to quantify 16 mycotoxins produced by major C. sativa fungi, followed by a post-target screening of 283 pesticides based on a comprehensive spectral library. The validated procedure was applied to ten CBD-based products. Up to six different Fusarium mycotoxins were found in seven samples, the most prevalent being zearalenone (60%) and enniatin B1 (30%), both found at a maximum level of 11.6 ng/g. Co-occurrence was observed in four samples, including one with enniatin B1, enniatin A and enniatin A1. On the other hand, 46 different pesticides were detected after retrospective analysis. Ethoxyquin (50%), piperonyl butoxide (40%), simazine (30%) and cyanazine (30%) were the major residues found. These results highlight the necessity of monitoring contaminants in food supplements in order to ensure a safe consumption, even more considering the increase trend in their use. Furthermore, the developed procedure is proposed as a powerful analytical tool to evaluate the potential mycotoxin profile of these particular products.

Residue determination of pyraclostrobin, picoxystrobin and its metabolite in pepper fruit via UPLC-MS/MS under open field conditions

In this study, a new, high-efficiency and sensitive method was determined to simultaneous analyze the residue of pyraclostrobin, picoxystrobin and its metabolite BF-500-3 in pepper fruit using modified QuEChERS pretreatment combined with ultra performance liquid chromatography-tandem mass spectrometry. The clean-up steps of QuEChERS procedure were optimized using the chemometric tools. Models of stepwise regression and surface response demonstrated that the optimal sorbent mixtures were 40 mg nano-zirconia + 10 mg C₁₈ for pyraclostrobin and picoxystrobin and 30 mg nano-zirconia + 20 mg C₁₈ for BF-500-3. The optimized purification procedures provided satisfactory recoveries for all tested fungicides with rates between 91% and 107% and relative standard deviations between 3.7% and 9.6%. The limits of detection and quantification were in the range of 0.0360-0.272 μg/kg and 0.120-0.910 μg/kg. Based on this method, the dissipation of pyraclostrobin, picoxystrobin and its metabolite in pepper fruit were determined under field conditions. Pyraclostrobin and picoxystrobin degraded rapidly with half-lives of 5.53-7.02 and 5.97-7.82 days and 5.09 and 5.68 days in 2016 and 2017, respectively. The residue levels of BF-500-3 increased first and then decreased. The terminal residues of all fungicides were below the maximum residue limits (MRLs). This research can not only provide guidance for the reasonable usage of pyraclostrobin and picoxystrobin in agriculture but also give a reference for the Chinese government to establish the MRL for pyraclostrobin in pepper.

Dissipation and safety evaluation of afidopyropen and its metabolite residues in supervised cotton field

The novel insecticidal mechanism of afidopyropen can be substituted for traditional pesticides to control sap-sucking pests in cotton field. The data of residue amounts of afidopyropen and its metabolite M440I007 in cotton matrix and the environment soil are important to evaluate the safe use of the target compound and establish maximum residue limit (MRL). In this work, the dissipation and residue of afidopyropen and its metabolite M440I007 in cotton and field soils were investigated. The analytical methods of the target compound in cotton plants, cottonseed, crude cottonseed oil, cottonseed oil and soil were developed and quantified by high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS), which satisfied the rules of pesticide residue determination. The dissipation half-lives of afidopyropen in cotton plants and soil ranged from 1 to 3 days and 4-13 days, respectively. After 14 days from the last application, the residues of afidopyropen were below 0.01 mg/kg in cottonseed and were <0.005-0.0099 mg/kg in soil, and the residues of M440I007 were below 0.02 mg/kg in cottonseed and below 0.01 mg/kg in soil. The total national estimated daily intake (NEDI) of afidopyropen was 1.41 mg and the risk quotient (RQ) was 28.0%. The results showed that the risk of application of afidopyropen with the recommended dosage was acceptable.

Determination of phenamacril residues in flour and rice based on Z-Sep+ using ultra-high-performance liquid chromatography-tandem mass spectrometry

Phenamacril is a new broad-spectrum fungicide that is commonly used for the control of fungal diseases in wheat and rice. In this study, ultra-high-performance liquid chromatography-tandem mass spectrometry was used to establish a method for analyzing the residual phenamacril in flour and rice based on the improved QuEChERS (quick, easy, cheap, effective, rugged and safe) method using Z-Sep+ as the adsorbent in the pre-treatment process. The average recovery of phenamacril in flour and rice was 82.2-96.0%, the relative standard deviation was 2.1-5.6% and the limit of quantification was 0.5 μg/kg. The accuracy and sensitivity of this method meet the requirements for residue analysis. The method was applied to commercially available flour and rice samples, and the detected concentrations of phenamacril were 0.005-0.033 mg/kg. This method provides technical support for the safety evaluation of phenamacril.