Multi-residue method for the detection of veterinary drugs in distillers grains by liquid chromatography–Orbitrap high resolution mass spectrometry

Targeted Analysis of Veterinary Drugs in Food Samples by Developing a High-Resolution Tandem Mass Spectral Library

Veterinary drug residues present in foods can pose severe health threats to the population. The present study aims to develop a high-resolution mass spectral library of 158 veterinary drugs of 16 different classes for their rapid identification in food samples through liquid chromatography-high-resolution electrospray ionization-tandem mass spectrometry (LC-HR-ESI-MS/MS). Standard drugs were pooled according to their log P values and exact masses before analysis. Spectra were collected at system automated collision energy, i.e., of 25-60 eV and four predetermined collision energies (10, 20, 30, and 40 eV) for each compound using a schedule precursor list of [M + H]+, [M + Na]+, and [M + NH4]+ ions. The utility of the developed database was checked by analyzing food samples. A total of 17 veterinary drugs based on the reference standard retention times (RTs), HR-MS spectra, and MS/MS spectra were identified in the analyzed samples. Moreover, five veterinary drugs were selected for quantitative analysis, including doxycycline hyclate, lincomycin, sulfasalazine, moxifloxacin, and diphenoxylate, using liquid chromatography-ion trap mass-spectrometry (LC-IT-MS). Concentrations of the drug were obtained to vary from 0.0805 to 0.9731 mg/kg in food samples and were found to be exceeded in most of the cases as per the maximum residue levels described by Food and Agriculture Organization (FAO)/World Health Organization (WHO). The MS data were submitted to the MetaboLights online database (MTBLS2914). This study will help in the high-throughput screening of multiclass veterinary drugs in foodstuffs.

A Review on Pretreatment and Analysis Methods of Polyether Antibiotics in Complex Samples

Polyether antibiotics (PAs) are the anti-coccidiosis drugs used for treating and preventing coccidiosis. Studies show the residues of these antibiotics in food cause adversities and threaten human health. PAs thus need robust, rugged, and accurate methods for their analysis. This review encompasses pretreatment and detection methods of PAs in diverse matrices since 2010. Both conventional and developed methods are part of the pretreatments, such as dispersive liquid-liquid microextraction, solid-phase extraction, solid-phase microextraction, solvent front position extraction, QuEChERS (Quick Easy Cheap Effective Rugged and Safe), supercritical fluid extraction, and others. The analysis methods involve liquid chromatography coupled with detectors, sensors, etc. The pros and cons of various techniques for PAs have been discussed and future tendencies are proposed.

Magnetic Solid-Phase Extraction Based on Silica and Graphene Materials for Sensitive Analysis of Emerging Contaminants in Wastewater with the Aid of UHPLC-Orbitrap-MS

With the advancement of technology and nanotechnology, new extraction sorbents have been created and effectively used for the magnetic solid-phase extraction of target analytes. Some of the investigated sorbents have better chemical and physical properties, exhibiting high extraction efficiency and strong repeatability, combined with low detection and quantification limits. In this study graphene oxide (GO) magnetic composites were prepared and used as magnetic solid-phase extraction (MSPE) adsorbents along with synthesized silica based magnetic nanoparticles (MNPs) functionalized with the C18 group for the preconcentration of emerging contaminants (ECs) in wastewater samples generated from hospital and urban facilities. The sample preparation with magnetic materials was followed by UHPLC-Orbitrap MS analysis for the accurate identification and determination of trace amounts of pharmaceutical active compounds and artificial sweeteners in effluent wastewater. Optimal conditions were used for the extraction of ECs from the aqueous samples, prior to UHPLC-Orbitrap MS determination. The proposed methods achieved low quantitation limits between 1.1-33.6 ng L^-1 and 1.8-98.7 ng L^-1 and satisfactory recoveries in the range of 58.4%-102.6%. An intra-day precision of less than 23.1% was achieved, while inter-day RSD% values in the range of 5.6-24.8% were observed. These figures of merit suggest that our proposed methodology is suitable for the determination of target ECs in aquatic systems.

Sample preparation optimization by central composite design for multi class determination of 172 emerging contaminants in wastewaters and tap water using liquid chromatography high-resolution mass spectrometry

Multi-residue analysis is highly desirable for water quality control. To this end, a comprehensive workflow for the quantitative analysis of 172 anthropogenic organic compounds belonging to emerging contaminants (pharmaceuticals and personal care products, illicit drugs, organophosphate flame retardants and perfluoroalkyl substances) has been developed for application to wastewater and tap water, based on solid phase extraction (SPE) and Orbitrap high resolution mass spectrometry (HRMS). Due to the large number of analytes with various physicochemical characteristics that should be efficiently extracted, the response surface methodology (RSM) employing a central composite design (CCD) and desirability function (DF) approach was exploited to optimize the sample preparation process, instead of the conventional single-factor analysis. The factors included in the design of experiments (DoE) were sample pH, eluent solvents composition and volume. Statistical analysis (ANOVA) proved the adequacy of the proposed model (2- factor interaction) as p-value < 0.05 followed by different diagnostic tests confirmed the good fitting. The best values to acquire DF close to 1 were pH 3.5, methanol/ethyl acetate ratio 87:13 and eluent volume 6 mL. The streamlined method was validated in terms of accuracy, linearity, method limits, reproducibility, and matrix effect. The proposed workflow combines sensitivity and robustness, with recoveries over 70%, method quantification limits <1 ng/L, and relative standard deviations <20% for most of the compounds. Slight matrix effect (ME) was observed for most of PPCPs, IDs and PFAs, in contrast with most of the OPFRs, for which strong ME was calculated. Method applicability was tested over wastewater collected from a municipal wastewater treatment plant in Thessaloniki (Greece), revealing the presence of 69 and 40 compounds in influents and effluents, respectively, at varying concentrations.

Combination of natural antimicrobials for contamination control in ethanol production

Presence of bacterial contaminants at levels > 10⁷ colony forming units per milliliter (CFU/mL) during ethanol production processes reduces the alcoholic fermentation yield by 30%. Antibiotics are currently used to control contamination, but their residues may be detected in yeast extract, restricting this by-product trade to several countries. Thus, the objective of this study was to assess antimicrobial activity of the natural compounds hops extract, 4-hydroxybenzoic acid, nisin Z, and lysozyme against Lactobacillus fermentum, Leuconostoc mesenteroides, and Saccharomyces cerevisiae, aiming development of a formula. Minimum Inhibitory Concentration of each antimicrobial was determined for bacteria and subsequently, nisin (30 mg/L) and hops extract (5 mg/L) were tested together, showing inhibitory effects combining doses of each antimicrobial that were equivalent to an eightfold reduction of their original Minimum Inhibitory Concentrations (3.75 and 0.625 mg/L, respectively), resulting in a FIC_Index of 0.25. Thereon, a formula containing both compounds was developed and tested in fermentation assays, promoting reductions on bacterial population and no severe interferences in yeast viability or population even at extreme doses. Therefore, these compounds have great potential to successfully substitute conventional antibiotics in the ethanol industry.

The Role of Biofuels Coproducts in Feeding the World Sustainably

One of the grand challenges facing our society today is finding solutions for feeding the world sustainably. The food-versus-fuel debate is a controversy embedded in this challenge, involving the trade-offs of using grains and oilseeds for biofuels production versus animal feed and human food. However, only 6% of total global grain produced is used to produce ethanol. Furthermore, biofuels coproducts contribute to sustainability of food production because only 1% to 2.5% of the overall energy efficiency is lost from converting crops into biofuels and animal feed, and approximately one-third of the corn used to produce ethanol is recovered as feed coproducts. Extensive research has been conducted over the past 15 years on biofuels coproducts to (a) optimize their use for improving caloric and nutritional efficiency in animal feeds, (b) identify benefits and limitations of use in various animal diets,

Evaluation of Selected Nutrients and Contaminants in Distillers Grains from Ethanol Production in Texas

This article contains the results of the evaluation of distillers grain (DG) coproducts from different ethanol plants around the United States and supplemented in animal diets in Texas, based on samples analyzed from 2008 to 2014. The samples were assessed for concentration, occurrence, and prevalence of selected nutrients and contaminants. Protein and sulfur contents of DG were largely different between maize and sorghum coproducts, as well as wet distillers grain with solubles (WDGS) and dried distillers grain with solubles (DDGS), indicating a significant effect of grain feedstock and dry grind process stream on DG composition and quality. Salmonella was isolated in 4 DDGS samples of a total of 157 DG samples, a percentage (2.5%) that is lower than the percentage of Salmonella -positive samples found in other feed samples analyzed during the same period. A small amount of virginiamycin residue was found in 24 maize DDGS, 1 maize WDGS, and 2 sorghum DDGS samples of 242 samples in total. One sorghum DDGS sample of 168 DG samples was contaminated with animal protein prohibited for use in ruminant feed and was channeled to poultry feed. The concentrations of aflatoxin and fumonisin DG coproducts averaged 3.4 μg/kg and 0.7 mg/kg, respectively. Among contaminated maize DG samples, five DDGS samples for aflatoxin contained a higher concentration than the U.S. Food and Drug Administration (FDA) minimum action level of 20 μg/kg for use in animal feed, whereas no sample for fumonisin was found above the action level of 5 mg/kg. The study provides the most current results involving DG coproducts and associated hazards that will assist development of food safety plans required by the FDA in their September 2015 rule titled "Current Good Manufacturing Practice Hazard Analysis and Risk Based Preventive Controls for Food for Animals."

Nontargeted Screening Method for Illegal Additives Based on Ultrahigh-Performance Liquid Chromatography-High-Resolution Mass Spectrometry

Identification of illegal additives in complex matrixes is important in the food safety field. In this study a nontargeted screening strategy was developed to find illegal additives based on ultrahigh-performance liquid chromatography-high-resolution mass spectrometry (UHPLC-HRMS). First, an analytical method for possible illegal additives in complex matrixes was established including fast sample pretreatment, accurate UHPLC separation, and HRMS detection. Second, efficient data processing and differential analysis workflow were suggested and applied to find potential risk compounds. Third, structure elucidation of risk compounds was performed by (1) searching online databases [Metlin and the Human Metabolome Database (HMDB)] and an in-house database which was established at the above-defined conditions of UHPLC-HRMS analysis and contains information on retention time, mass spectra (MS), and tandem mass spectra (MS/MS) of 475 illegal additives, (2) analyzing fragment ions, and (3) referring to fragmentation rules. Fish was taken as an example to show the usefulness of the nontargeted screening strategy, and six additives were found in suspected fish samples. Quantitative analysis was further carried out to determine the contents of these compounds. The satisfactory application of this strategy in fish samples means that it can also be used in the screening of illegal additives in other kinds of food samples.

Development and validation of rapid multiresidue and multi-class analysis for antibiotics and anthelmintics in feed by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry

A new multi-residue method for the analysis of veterinary drugs, namely amoxicillin, chlortetracycline, colistins A and B, doxycycline, fenbendazole, flubendazole, ivermectin, lincomycin, oxytetracycline, sulfadiazine, tiamulin, tilmicosin and trimethoprim, was developed and validated for feed. After acidic extraction, the samples were centrifuged, purified by SPE and analysed by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry. Quantitative validation was done in accordance with the guidelines laid down in European Commission Decision 2002/657/CE. Matrix-matched calibration with internal standards was used to reduce matrix effects. The target level was set at the authorised carryover level (1%) and validation levels were set at 0.5%, 1% and 1.5%. Method performances were evaluated by the following parameters: linearity (0.986 < R(2) < 0.999), precision (repeatability < 12.4% and reproducibility < 14.0%), accuracy (89% < recovery < 107%), sensitivity, decision limit (CCα), detection capability (CCβ), selectivity and expanded measurement uncertainty (k = 2).This method has been used successfully for three years for routine monitoring of antibiotic residues in feeds during which period 20% of samples were found to exceed the 1% authorised carryover limit and were deemed non-compliant.

Development of a rapid multiplexed assay for the direct screening of antimicrobial residues in raw milk

Antimicrobial residues found to be present in milk can have both health and economic impacts. For these reasons, the widespread routine testing of milk is required. Due to delays with sample handling and test scheduling, laboratory-based tests are not always suited for making decisions about raw material intake and product release, especially when samples require shipping to a central testing facility. Therefore, rapid on-site screening tests that can produce results within a matter of minutes are required to facilitate rapid intake and product release processes. Such tests must be simple for use by non-technical staff. There is increasing momentum towards the development and implementation of multiplexing tests that can detect a range of important antimicrobial residues simultaneously. A simple in situ multiplexed planar waveguide device that can simultaneously detect chloramphenicol, streptomycin and desfuroylceftiofur in raw dairy milk, without sample preparation, has been developed. Samples are simply mixed with antibody prior to an aliquot being passed through the detection cartridge for 5 min before reading on a field-deployable portable instrument. Multiplexed calibration curves were produced in both buffer and raw milk. Buffer curves, for chloramphenicol, streptomycin and desfuroylceftiofur, showed linear ranges (inhibitory concentration (IC)20-IC80) of 0.1-0.9, 3-129 and 12-26 ng/ml, whilst linear range in milk was 0.13-0.74, 11-376 and 2-12 ng/ml, respectively, thus meeting European legislated concentration requirements for both chloramphenicol and streptomycin, in milk, without the need for any sample preparation. Desfuroylceftiofur-contaminated samples require only simple sample dilution to bring positive samples within the range of quantification. Assay repeatability and reproducibility were lower than 12 coefficient of variation (%CV), whilst blank raw milk samples (n = 9) showed repeatability ranging between 4.2 and 8.1%CV when measured on all three calibration curves. Graphical Abstract MBio SnapEsi reader and cartridge.

Recent advances in sample preparation techniques and methods of sulfonamides detection - A review

Sulfonamides (SAs) have been the most widely used antimicrobial drugs for more than 70 years, and their residues in foodstuffs and environmental samples pose serious health hazards. For this reason, sensitive and specific methods for the quantification of these compounds in numerous matrices have been developed. This review intends to provide an updated overview of the recent trends over the past five years in sample preparation techniques and methods for detecting SAs. Examples of the sample preparation techniques, including liquid-liquid and solid-phase extraction, dispersive liquid-liquid microextraction and QuEChERS, are given. Different methods of detecting the SAs present in food and feed and in environmental, pharmaceutical and biological samples are discussed.