Dynamic headspace generation and quantitation of triacetone triperoxide vapor

Development of a Gas Chromatography with High-Resolution Time-of-Flight Mass Spectrometry Methodology for BDNPA/F

Analysis of thermally labile compounds such as bis(2,2-dinitropropyl) acetal/formal (BDNPA/F), an energetic plasticizer, is usually performed via liquid chromatography (LC) as opposed to gas chromatography (GC) due to thermal decomposition in the inlet or the analytical column. While LC is a powerful technique, the analysis of volatile and semivolatile compounds is best suited to GC. Herein, a method was developed for a gas chromatograph coupled to high-resolution mass spectrometer (GC-HRMS), utilizing a programmable temperature vaporizer (PTV) inlet. A subset of the native compounds and several produced by the thermal decomposition of BDNPA/F in the inlet were evaluated by using multiple PTV inlet parameters to determine the optimal ramp rate and final temperature of the inlet (60 °C/min from 60 to 325 °C). The optimized GC-HRMS method nearly reduced all thermal decomposition, allowing for an excellent separation to be obtained. Furthermore, multiple ionization methods, including electron impact (EI), negative chemical ionization (NCI), and positive chemical ionization (PCI), were used to explore the many chemical differences between the BDNPA/F samples. A preliminary investigation of the benefits of using GC-HRMS to evaluate the chemical differences between unaged and aged BDNPA/F samples for unique insight was evaluated.

Explosive Odor Signature Profiling: A Review of recent advances in technical analysis and detection

With the ever-increasing threat of improvised explosive devices (IEDs) and homemade explosives (HME) both domestically and abroad, detection of explosives and explosive related materials is an area of urgent importance for preventing terrorist activities around the globe. Canines are a common biological detector used in explosive detection due to their enhanced olfactory abilities, high mobility, efficient standoff sampling, and optimal identification of vapor sources. While other sensors based on different principles have emerged, an important concept for the rapid field detection of explosives is understanding key volatile organic compounds (VOCs) associated with these materials. Explosive detection technology needs to be on par with a large number of threats including an array of explosive materials as well as novel chemicals used in the manufacture of IEDs. Within this much needed area of research for law enforcement and homeland security applications, several studies have sought to understand the explosive odor profile from a range of materials. This review aims to provide a foundational overview of these studies to provide a summary of instrumental analysis to date on the various types of explosive odor profiles evaluated focusing on the experimental approaches and laboratory techniques utilized in the chemical characterization of explosive vapors and mixtures. By expanding upon these concepts, a greater understanding of the explosive vapor signature can be achieved, providing for enhanced chemical and biological sensing of explosive threats as well as expanding upon existing laboratory-based models for continued sensor development.

Detection of Triacetone Triperoxide (TATP) and Hexamethylene Triperoxide Diamine (HMTD) from the Gas Phase with Differential Ion Mobility Spectrometry (DMS)

One of the significant problems in the modern world is the detection of improvised explosives made of materials synthesized at home. Such compounds include triacetone triperoxide (TATP) and hexamethylene triperoxide diamine (HMTD). An attempt was made to construct an instrument allowing for the simultaneous detection of both compounds despite the large difference of vapor pressure: very high for TATP and very low for HMTD. The developed system uses differential ion mobility spectrometry (DMS) in combination with a specially designed gas sample injection system. The created system of detectors allowed for the detection of a high concentration of TATP and a very low concentration of HMTD. TATP detection was possible despite the presence of impurities—acetone remaining from the technological process and formed as a coproduct of diacetone diperoxide (DADP) synthesis. Ammonia added to the carrier gas improved the possibility of detecting the abovementioned explosives, reducing the intensity of the acetone signal. The obtained results were then compared with the detection capabilities of drift tube ion mobility spectrometer (DT-IMS), which has not made possible such detection as DMS.

Trace vapor generator for Explosives and Narcotics (TV-Gen)

The Trace Vapor Generator for Explosives and Narcotics (TV-Gen) is a portable and compact instrument designed to deliver a continuous source of trace-level vapors and vapor mixtures. It provides a tool to assist in the independent validation and verification of new materials and sensors under development for the vapor detection of explosives and narcotics. The design was conceived for use with a broad range of analytes, detection systems, materials, and sensors and to switch easily between the clean and analyte vapor streams. The TV-Gen system utilizes nebulization of aqueous analyte solutions, an oven to promote efficient transport, and a control box that provides dedicated computer control with logging capabilities. Resultant vapor streams are stable over several hours, with the vapor concentration controlled by a combination of aqueous analyte solution concentration, liquid flow rate through the nebulizer, and volume flow rate of air through the TV-Gen manifold.

Methodological Considerations in Canine Olfactory Detection Research

Dogs are increasingly used in a wide range of detection tasks including explosives, narcotics, medical, and wildlife detection. Research on detection dog performance is important to understand olfactory capabilities, behavioral characteristics, improve training, expand deployment practices, and advance applied canine technologies. As such, it is important to understand the influence of specific variables on the quantification of detection dog performance such as test design, experimental controls, odor characteristics, and statistical analysis. Methods for testing canine scent detection vary influencing the outcome metrics of performance and the validity of results. Operators, management teams, policy makers, and law enforcement rely on scientific data to make decisions, design policies, and advance canine technologies. A lack of scientific information and standardized protocols in the detector dog industry adds difficulty and inaccuracies when making informed decisions about capability, vulnerability, and risk analysis. Therefore, the aim of this review is to highlight important methodological issues and expand on considerations for conducting scientifically valid detection dog research.

Trace explosives sensor testbed (TESTbed)

A novel vapor delivery testbed, referred to as the Trace Explosives Sensor Testbed, or TESTbed, is demonstrated that is amenable to both high- and low-volatility explosives vapors including nitromethane, nitroglycerine, ethylene glycol dinitrate, triacetone triperoxide, 2,4,6-trinitrotoluene, pentaerythritol tetranitrate, and hexahydro-1,3,5-trinitro-1,3,5-triazine. The TESTbed incorporates a six-port dual-line manifold system allowing for rapid actuation between a dedicated clean air source and a trace explosives vapor source. Explosives and explosives-related vapors can be sourced through a number of means including gas cylinders, permeation tube ovens, dynamic headspace chambers, and a Pneumatically Modulated Liquid Delivery System coupled to a perfluoroalkoxy total-consumption microflow nebulizer. Key features of the TESTbed include continuous and pulseless control of trace vapor concentrations with wide dynamic range of concentration generation, six sampling ports with reproducible vapor profile outputs, limited low-volatility explosives adsorption to the manifold surface, temperature and humidity control of the vapor stream, and a graphical user interface for system operation and testing protocol implementation.

The gas chromatographic analysis of the reaction products of the partial isobutane oxidation as a two phase process

The partial oxidation of isobutane to t-butyl hydroperoxide (TBHP) has been studied analytically for the first time as a two-phase process in a capillary micro reactor. In order to obtain detailed information on products, yields, selectivities and reaction pathways, the products have been investigated by GC/MS. An Rxi-5ms column and a PTV-injector have been used to analyze the liquid products. TBHP, di-t-butyl peroxide (DTBP), t-butanol (TBA), and propanone as main products as well as further by-products e.g. methanal, isopropanol, isobutanol and isobutanal in minor quantities have been identified by MS. The liquid products have been obtained by quenching the reaction and vaporizing the isobutane afterwards by pressure reduction using a mass flow controller allowing a constant mass flow. For all liquid reaction products calibrations, a validation of the method including limits of quantification and detection as well as calculation of uncertainties has been performed. The results have been applied successfully for the investigation of the selectivities of the main products (TBHP, DTBP, TBA, propanone) of the isobutane oxidation. In the frame of the analytical investigation of this reaction a correlation coefficient of r(2)>0.999 for TBHP and DTBP, which is necessary to perform a validation, has been obtained for the first time. The gaseous phase has been analyzed using a GASPRO column, a DEANS switch, a mole sieve column and a TCD detector. Apart from the gaseous reactants, isobutene has been found.

Analysis of ammonium nitrate headspace by on-fiber solid phase microextraction derivatization with gas chromatography mass spectrometry

A novel analytical method has been developed for the quantitation of trace levels of ammonia in the headspace of ammonium nitrate (AN) using derivatized solid phase microextraction (SPME) fibers with gas chromatography mass spectrometry (GC-MS). Ammonia is difficult to detect via direct injection into a GC-MS because of its low molecular weight and extreme polarity. To circumvent this issue, ammonia was derivatized directly onto a SPME fiber by the reaction of butyl chloroformate coated fibers with the ammonia to form butyl carbamate. A derivatized externally sampled internal standard (dESIS) method based upon the reactivity of diethylamine with unreacted butyl chloroformate on the SPME fiber to form butyl diethylcarbamate was established for the reproducible quantification of ammonia concentration. Both of these compounds are easily detectable and separable via GC-MS. The optimized method was then used to quantitate the vapor concentration of ammonia in the headspace of two commonly used improvised explosive device (IED) materials, ammonium nitrate fuel oil (ANFO) and ammonium nitrate aluminum powder (Ammonal), as well as identify the presence of additional fuel components within the headspace.