Preparation of an internal surface reversed-phase restricted-access material for the analysis of hydrophobic molecules in biological matrices

Preparation of restricted-access boronate affinity adsorbent with excellent anti-protein adsorption property for directly extracting small cis-diol molecules from biological matrices

Boronate affinity adsorbents are of great promise in the enrichment of small cis-diol-containing molecules (cis-diols) from biological matrices. This work develops a restricted-access boronate affinity mesoporous adsorbent, in which boronate sites are only distributed on the internal surface of mesopores and the external surface is a strongly hydrophilic layer. The adsorbent has high binding capacities (30.3 mg g-1, 22.9 mg g-1 and 14.9 mg g-1 for dopamine, catechol and adenosine, respectively) in spite of removal of the boronate sites on the external surface of adsorbent. The adsorption specific of adsorbent towards cis-diols was assessed by dispersive solid-phase extraction (d-SPE) method, and the results show that the adsorbent can selectively extract small cis-diols in the biosamples while exclude proteins completely. Under the optimal d-SPE, the nucleosides and cis-diol drugs in human serum were successfully analyzed by coupling d-SPE with high-performance liquid chromatography. Where, the detection limits are between 6.1 and 13.4 ng mL-1 for four nucleosides, and 24.9 and 34.3 ng mL-1 for two cis-diol drugs; the relative recoveries of all the analytes vary from 84.1% to 110.1% (RSDs <13.4%, n = 6). The results indicate that the adsorbent can directly treat the real biosamples without the necessary protein precipitation steps in advance, thus simplifying the analysis process.

Triblock copolymer–grafted restricted access materials with zwitterionic polymer outer layers for highly efficient extraction of fluoroquinolones and exclusion of proteins

High-selectivity and high-exclusion restricted access materials (RAMs) benefit the analysis of biological samples. Herein, triblock copolymer-functionalized poly(4-vinylbenzyl chloride-co-divinylbenzene) (P_VBC/DVB) microspheres were prepared via the sequential surface-initiated atom radical polymerization of hydrophobic styrene (St), ionic vinylimidazole (VIm), and zwitterionic sulfobetaine methacrylate (SBMA), affording RAMs with multiple interaction-adsorption sites and zwitterionic polymer exclusion sites on the internal and external surfaces of P_VBC/DVB. The preferential extraction of fluoroquinolones (FQs) is realized based on the hydrophobic/π-π/ion exchange interactions due to the grafted poly-St-VIm, and the zwitterionic poly-SBMA block in the triblock copolymers can efficiently exclude various proteins. A sensitive detection method for FQs in chicken was established by solid phase extraction with RAMs as adsorbent combined with UPLC-MS/MS, achieving wide linearity (2.0-200.0 ng mL^-1), low limit of detection (0.5 μg kg^-1) and limit of quantification (1.5 μg kg^-1), and good inter- and intraday precision with satisfactory recoveries (104.1%-117.7% and 115.3%-121.2% with RSDs < 12%).

Preparation of restricted access monolithic tip via unidirectional freezing and atom transfer radical polymerization for directly extracting magnolol and honokiol from rat plasma followed by liquid chromatography analysis

In the present study, a novel strategy based on unidirectional freezing and atom transfer radical polymerization combined with activator regenerated by electron transfer (ARGET-ATRP) was applied to synthesizing orderly macroporous monolithic column with restricted-access (RA) property in a 1000μL pipette tip. The RA column was composed of hydrophobic inner column (poly(styrene-co-ethylene glycol dimethacrylate) and hydrophilic outer layer (poly-hydroxyethyl methacrylate chain) which was grafted on the hydrophobic surface by means of the second ARGET-ATRP reaction. The as-prepared RA monolithic tip was connected to a 2mL syringe for directly extracting magnolol and honokiol from rat plasma just by manually pushing operation. The surface morphology and chemical composition of the column were characterized by scanning electronic microscope, infrared spectroscopy and X-ray photoelectron spectroscopy respectively. The determined results of evaluation experiments based on the optimized solid phase extraction conditions showed that the RA column possessed good protein exclusion power, extraction recovery and reusability. The constructed RA-SPE-HPLC/UV method for simultaneously analyzing magnolol and honokiol in rat plasma was validated with quality control (QC) samples at four concentration levels. Good precision (RSDs, 3.39~11.16%) and acceptable accuracy (relative recoveries, 89.52%~108.42%) were obtained for intra- and inter-day assays. The determined results of real rat plasma as well as the standard-addition samples demonstrated the developed method with good accuracy and precision. It can be extrapolated from the experimental results that this simple and cost-efficient RA-SPE method is also suitable for directly extracting other hydrophobic constituents in biological body fluid for therapeutic drug monitoring or pharmacokinetic study.

Preparation of bottlebrush polymer-modified magnetic graphene as immobilized metal ion affinity adsorbent for purification of hemoglobin from blood samples

An immobilized metal affinity (IMA) adsorbent was prepared by grafting bottlebrush polymer pendant with iminodiacetic acid (IDA) from the surface of polydopamine (PDA)-coated magnetic graphene oxide (magGO), via surface-initiated atom transfer radical polymerization (SI-ATRP). Poly(hydroxyethyl methacrylate) (PHEMA) was grafted firstly from the PDA-coated magGO as the backbone, and then poly(glycidyl methacrylate) was grafted from the PHEMA chains via the second SI-ATRP to afford the bottlebrush polymer-grafted magGO Thereafter, IDA was anchored on the nanocomposites to produce the IMA adsorbent after chelating copper ions. The adsorbent was characterized by various physical and physicochemical methods. Its adsorption properties were evaluated by using histidine-rich proteins (bovine hemoglobin, BHb) and other proteins (lysozyme and cytochrome-C). The results show that its maximum adsorption capacity to BHb was 378.6 mg g^-1, and the adsorption equilibrium can be quickly reached within 1 h. The adsorbent has excellent reproducibility and reusability. It has been applied to selectively purify hemoglobin from human whole blood, indicating its potential in practical applications. Graphical abstract.

Development of immunosorbents for the analysis of forchlorfenuron in fruit juices by ion mobility spectrometry

The advantages of using smart materials as immunosorbents in the analysis of complex matrices by ion mobility spectrometry (IMS) have been highlighted in this study. A novel analytical method has been proposed for the sensitive, selective, and fast determination of residues of the plant growth regulator forchlorfenuron in fruit juices. Three different monoclonal antibodies (s3#22, p2#21, and p6#41) were employed for the production of immunosorbents, based on Sepharose gel beads, which were characterized in terms of loading capacity, solvent resistance, and repeatability for its use in solid-phase extraction (SPE). Immunosorbents that were prepared with antibody p6#44 provided the best performance, with a loading capacity of 0.97 μg, a 10% (v/v) 2-propanol tolerance, and a reusability of at least eight uses. The SPE procedure involved the use of a column with 0.15 g Sepharose beads, containing 0.5 mg antibody, which was loaded to 20 mL of the sample, washed with 2 mL of water plus 2 mL of 10% (v/v) 2-propanol, and eluted with 2 mL of 2-propanol. The cleaned extract was directly analyzed by IMS, giving a limit of detection of 2 μg L^-1 with a relative standard deviation of 7.6%. Trueness was assessed by the analysis of blank grape and kiwifruit juice samples spiked with forchlorfenuron concentrations from 10 to 400 μg L^-1, with recoveries from 80 to 115%. The analytical performance of the proposed immunosorbent was compared with conventional extraction and cleanup methods, such as QuEChERS and C₁₈-based SPE, giving the cleanest extracts for accurate determinations of forchlorfenuron by IMS. Graphical abstract ᅟ.

Preparation of a monolithic cation-exchange material with hydrophilic external layers by two-step reversible addition-fragmentation chain transfer polymerization

In recent years, the efficient analysis of biological samples has become more important due to the advances of life science and pharmaceutical research and practice. Because biological sample pretreatment is the bottleneck for fast process, material development for efficient sample process in the high-performance liquid chromatography analysis is highly desirable. In this research, a cation-exchange restricted access monolithic column was synthesized by a reversible addition-fragmentation chain transfer polymerization method. Utilizing the controlled/living property of the reversible addition-fragmentation chain transfer method, a monolithic column of cross-linked poly(sulfopropyl methacrylate) was prepared first and then linear poly(glycerol mono-methacrylate) was immobilized covalently on the surface of the polymer. The monolithic material has both functionalities of cation-exchange and protein exclusion. Protein recovery of 94.6% was obtained after grafting of poly(glycerol mono-methacrylate) while the cation-exchange property of the column is still retained. In the study, the relation between the synthetic conditions and properties of the materials was studied. The synthesis conditions including the porogen, monomer concentration, and ratio of monomers/initiator/reversible addition-fragmentation chain transfer agent were optimized. The study provided a method for the preparation of restricted access monolithic columns: a bifunctional material by reversible addition-fragmentation chain transfer polymerization method.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Rapid determination of X-ray contrast agent iomeprol in human plasma by on-line solid-phase extraction coupled with phase optimized liquid chromatography

Phase optimized liquid chromatography (POPLC) allows for the optimized combination of column segments of any length and stationary phases with different functionalities. In this study, a simple and rapid method using POPLC coupled with on-line solid-phase extraction (SPE) for the analysis of X-ray contrast media agent iomeprol (IOM) in human plasma was developed. Because the phenyl (PH) stationary phase has strong hydrophobic and π-π interactions with IOM and iopromide (IOP, internal standard), the best separation efficiency was achieved with a 250mm×3mm homogenous PH POPLC-column. Different kinds of on-line SPE sorbents were studied, including restricted access material-alkyl diol silica (ADS), LiChrolut EN with excellent absorption capacity and hydrophilic-lipophilic-balanced Oasis HLB. The most efficient on-line sample clean-up was carried out using a fast-flow on-line purification approach with an Oasis HLB pre-column ((20mm×2mm, 30μm). This pre-column showed excellent durability and reproducibility. At least 400 samples could be analyzed with one pre-column. Each plasma sample was directly injected and analyzed within 15min. The calibration curves were linear in the range of 10-1000μg/mL. The limit of quantitation was 2.26μg/mL. The inter-day precision of this method was excellent and less than 1.44%, and the intra-day precision was less than 4.44%. The inter-day and intra-day accuracy ranged from 94.33% to 104.36% and 94.60% to 101.71%, respectively. This validated method is expected to be useful in the analysis of human plasma samples for glomerular filtration rate (GFR) measurements and assessment of kidney function.