Room temperature fabrication of post-modified zeolitic imidazolate framework-90 as stationary phase for open-tubular capillary electrochromatography

Synthesis of hierarchically porous zirconium-based metal-organic framework@silica core-shell stationary phase through etching strategy for liquid chromatography

Metal organic frameworks (MOFs) show promise to be employed as stationary phase for high performance liquid chromatography (HPLC), however, the microporous structures of MOFs seriously restrict the diffusion and mass transfer of solute molecules, leading to a low column efficiency. In this paper, the fabrication of hierarchically porous UiO-66@SiO2 (HP- UiO-66@SiO2) core-shell microspheres via H2O2 etching has been proposed as a viable approach to enhance the separation performance of MOFs-based columns for HPLC. Through the direct treatment of the preliminary prepared UiO-66@SiO2 microspheres with H2O2 etching, HP-UiO-66@SiO2 core-shell microspheres were successfully synthesized with an enlarged pore size of up to 9 nm, facilitating efficient mass transfer in chromatographic separation. The prepared HP-UiO-66@SiO2 core-shell microspheres were then explored as stationary phase in HPLC to separate the nonpolar alkyl benzene homologues, the polar aromatic alcohol homologues and the xylene isomers. The results indicated that the baseline separations of these solutes were achieved successfully with narrow peak width and higher resolution than the UiO-66@SiO2 column. The HP-UiO-66@SiO2 column exhibited superior separation performance, reaching a maximum plate number of 134,459/m for fluorene, and showing good reproducibility. As a result, this template-free approach suggests that the fabrication of hierarchically porous MOFs@silica core-shell microspheres is a successful approach to enhance the column efficiency of MOFs-based columns in HPLC.

Enhancing Separation Abilities of "Low-Performance" Metal-Organic Framework Stationary Phases through Size Control

Peak broadening and peak tailing are common but rebarbative phenomena that always occur when using metal-organic frameworks (MOFs) as stationary phases. These phenomena result in diverse "low-performance" MOF stationary phases. Here, by adjusting the particle size of MOF stationary phases from microscale to nanoscale, we successfully enhance the separation abilities of these "low-performance" MOFs. Three zirconium-based MOFs (NU-1000, PCN-608, and PCN-222) with different organic ligands were synthesized with sizes of tens of micrometers and hundreds of nanometers, respectively. All the nanoscale MOFs exhibited exceedingly higher separation abilities than the respective microscale MOFs. The mechanism investigation proved that reducing the particle size can reduce the mass transfer resistance, thus enhancing the column efficiency by controlling the separation kinetics. Modulating the particle size of MOFs is an efficient way to enhance the separation capability of "low-performance" MOFs and to design high-performance MOF stationary phases.

High-Efficiency and Versatile Approach To Fabricate Diverse Metal-Organic Framework Coatings on a Support Surface as Stationary Phases for Electrochromatographic Separation

A large number of metal-organic frameworks (MOFs) have exhibited increasingly wide utilization in the field of chromatographic separation owing to their intrinsic fascinating properties. However, the previous studies on supported MOF coating-based chromatographic separation focused only on the synthesis and chromatographic performance of a certain kind of supported MOF coatings as stationary phases using the multiple-step, complicated, and time-consuming modification methods, which severely impeded the widespread application of MOFs in separation science. Herein, a high-efficiency and versatile methodology toward diverse supported MOF coating-based stationary phases to achieve high-efficiency chromatographic separation was first reported based on the immobilized cysteine (Cys)-triggered in situ growth (ICISG) strategy. As a proof-of-concept demonstration, four types of MOF crystals consisting of different ligands and metal ions (Zn²⁺, Cu²⁺, Fe³⁺, and Zr⁴⁺) were conveniently and firmly grown on a Cys-modified capillary using the ICISG strategy and employed as the functional stationary phase for electrochromatographic separation. A broad variety of neutral, acidic, and basic compounds were all separated in a highly efficient manner on the developed four MOF-coated columns. The maximum theoretical plate number for Cys-MIL-100(Fe)@capillary was close to 1.0 × 10⁵ plates/m, and the intraday, interday, and column-to-column repeatabilities of retention times for the four MOF-modified columns were all less than 5.25%. More interestingly, the diversified separation performance of the developed MOF-coated columns indicated that the preparation strategy and the skeletal structure of the MOF coating-based stationary phases have a significant influence on the electrochromatographic separation performance and column capacity. Benefiting from the strong universality and high applicability of the developed ICISG strategy, the present study provides an effective route to facilitate the design and fabrication of novel functional MOF-based chromatographic stationary phases.

A Comprehensive Review on Metal Organic Framework Based Preconcentration Strategies for Chromatographic Analysis of Organic Pollutants

Organic pollutants (OPs) are of worldwide concern for being hazardous to human existence and natural flora and fauna in view of their contaminating nature, bio-aggregation properties and long range movement abilities in environment. Metal organic frameworks (MOFs) are a new kind of crystalline porous material, composed of metal ions and multi dentate organic ligands with well-defined co-ordination geometry exhibiting promising application respect to adsorptive evacuation of OPs for chromatographic analysis. Applications of MOFs as preconcentration material and column packing material are reviewed. Key analytical characteristics of MOF based preconcentration techniques and coupled chromatographic procedures are summarized in detail. MOF based preconcentration strategies are compared with conventional sorbent based extraction techniques for thorough evaluation of performance of MOF materials.

A porous layer open-tubular capillary column supported with pepsin and zeolitic imidazolate framework for enantioseparation of four basic drugs in capillary electrochromatography

New material zeolitic imidazolate framework-4, 5-imidazoledicarboxylic acid (ZIF-IMD) located on the pore surface of porous layer open-tubular (PLOT) column previously functionalized with N-(3-aminopropyl)-imidazole have been prepared via a layer-by-layer self-assembly strategy. This new ZIF-IMD coating hybrids are used as solid-phase carriers for chiral selector pepsin immobilization. The ZIF-IMD material was characterized by scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscope and X-ray diffraction. The synthesized pepsin@ZIF-IMD@POLT column achieved the baseline separation of hydroxychloroquine (HCQ), chloroquine (CHQ) and hydroxyzine (HXY) (the resolution of HCQ: 2.19; CHQ: 1.84; HXY: 1.53). Compared with the pepsin@PLOT column (without ZIF-IMD material), the chiral separation capability of the pepsin@ZIF-IMD@POLT column can be remarkably improved. Several key parameters including concentration of chiral selector, buffer pH, applied voltage and buffer concentration were systematically evaluated to provide the optimal enantioseparation condition. The relative standard deviations (RSDs) of intra-day, inter-day, column-to-column and inter-batch of migration time and Rs of the HCQ were evaluated in detail, respectively (RSD < 7.21%). Additionally, the potential mechanism of increased resolution was discussed in the article.

Nanoscale Hierarchically Micro- and Mesoporous Metal-Organic Frameworks for High-Resolution and High-Efficiency Capillary Electrochromatographic Separation

Metal-organic frameworks (MOFs) have been widely applied in a variety of fields. However, most of the developed MOFs are micrometer scale in crystal size and contain only micropores, which will limit the mass transport and diffusion of various analytes into their internal interaction sites, severely restricting the potential of MOFs in separation science. Herein, nanoscale hierarchically porous MOFs (NHP-MOFs) were first explored as a novel MOF-based stationary phase with excellent mass transfer performance and abundant accessible interaction sites for high-performance chromatographic separation. As a proof-of-concept demonstration, the nanoscale hierarchically micro- and mesoporous UiO-66 (NHP-UiO-66) was firmly immobilized on the capillary inner surface and utilized as the porous stationary phase for high-resolution and high-efficiency electrochromatographic separation. A wide range of low-, medium-, and high-molecular-weight analytes, including substituted benzenes, chlorobenzenes, polycyclic aromatic hydrocarbons, nucleosides, polypeptides, and proteins were all separated well on a NHP-UiO-66-coated column with excellent resolution and repeatability, exhibiting significantly improved column efficiency and separation ability compared to those of a microporous UiO-66-modified column. The maximum column efficiencies for all the six kinds of analytes reached up to 1.2 × 10⁵ plates/m, and the relative standard deviations of the migration times of substituted benzenes for intraday, interday, and column-to-column were all lower than 5.8%. These results reveal that NHP-MOFs can effectively combine the advantages of the high specific surface area of microporous MOFs and the excellent mass transfer performance and abundant accessible interaction sites of NHP materials, possessing great prospect for high-performance chromatographic separation.

Metal organic framework ZIF-90 modified with lactobionic acid for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs

An in situ zeolite imidazole metal organic framework-90 (ZIF-90) modified capillary was prepared via the method of solvothermal synthesis. The coating of ZIF-90 was characterized by scanning electron microscopy, energy-dispersive X-ray spectrometry, and EOF. Capillary electrochromatography-based enantioseparation of the basic drugs propranolol (PRO), metoprolol (MET), atenolol (ATE), bisoprolol (BIS), and sotalol (SOT) was performed using lactobionic acid (LA) as the chiral selector. Compared with an uncoated silica capillary, the resolutions are greatly improved (PRO 1.40 → 3.23; MET 1.07 → 3.19; ATE 1.07 → 3.15; BIS 1.16 → 3.41; SOT 1.00 → 2.79). Effects of buffer pH values, proportion of organic additives, concentration of lactobionic acid, and applied voltage were investigated. Graphical abstract Schematic presentation of the preparation of zeolitic imidazolate framework-90 (ZIF-90) modified capillary (ZIF-90@capillary) for enantioseparation of drug enantiomers. The capillary was applied to construct capillary electrochromatography system with lactobionic acid for enantioseparation of basic chiral drugs.

Recent advancements in open-tubular liquid chromatography and capillary electrochromatography during 2014-2018

This review critically discusses the developments on open-tubular liquid chromatography (OT-LC) and open-tubular capillary electrochromatography (OT-CEC) during 2014-2018. An appropriate Scopus search revealed 5 reviews, 4 theoretical papers on open-tubular format chromatography, 29 OT-LC articles, 68 OT-CEC articles and 4 OT-LC/OT-CEC articles, indicating a sustained interest in these areas. The open-tubular format typically uses a capillary column with inner walls that are coated with an ample layer or coating of solid stationary phase material. The ratio between the capillary internal diameter and coating thickness (CID/CT) is ideally ≤ 100 for appropriate chromatographic retention. We, therefore, approximated the CID/CT ratios and found that 22 OT-LC papers have CID/CT ratios ≤100. The other 7 OT-LC papers have CID/CT ratio >100 but have clearly demonstrated chromatographic retention. These 29 papers utilised reversed phase or ion exchange mechanisms using known or innovative solid stationary phase materials (e.g. metal organic frameworks), stationary pseudophases from ionic surfactants or porous supports. On the other hand, we found that 68 OT-CEC papers, 7 OT-LC papers and 4 OT-LC & OT-CEC papers have CID/CT ratios >100. Notably, 44 papers (42 OT-CEC and 2 OT-LC & OT-CEC) did not report the retention factor and/or effective electrophoretic mobility of analytes. Considering all covered papers, the most popular activity was on the development of new chromatographic materials as coatings. However, we encourage OT-CEC researchers to not only characterise changes in the electroosmotic flow but also verify the interaction of the analytes with the coating. In addition, the articles reported were largely driven by stationary phase or support development and not by practical applications.

Metal organic framework HKUST-1 modified with carboxymethyl-β-cyclodextrin for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs

This work shows that the metal organic framework (MOF) HKUST-1 of type Cu₃(BTC)₂ (also referred to as MOF-199; a face-centered-cubic MOF containing nanochannels) is a most viable coating for use in enantioseparation in capillary electrochromatography (CEC). A HKUST-1 modified capillary was prepared and characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, elemental analysis and thermogravimetric analysis. CEC-based enantioseparation of the basic drugs propranolol (PRO), esmolol (ESM), metoprolol (MET), amlodipine (AML) and sotalol (SOT) was performed by using carboxymethyl-β-cyclodextrin as the chiral selector. Compared with a fused-silica capillary, the resolutions are improved (ESM: 1.79; MET: 1.80; PRO: 4.35; SOT: 1.91; AML: 2.65). The concentration of chiral selector, buffer pH value, applied voltage and buffer concentration were optimized, and the reproducibilities of the migration times and R_s values were evaluated. Graphical abstract Schematic presentation of the preparation of a HKUST-1@capillary for enantioseparation of racemic drugs. Cu(NO₃)₂ and 1,3,5-benzenetricarboxylic acid (BTC) were utilized to prepare the HKUST-1@capillary. Then the capillary was applied to construct capillary electrochromatography system with carboxymethyl-β-cyclodextrin (CM-β-CD) for separation of basic racemic drugs.

In situ growth of Zr-based metal-organic framework UiO-66-NH2 for open-tubular capillary electrochromatography

The high stability and other properties of Zr(IV)-based metal organic frameworks(MOFs) make it a promising choice for chromatographic separation, while the application in open-tubular capillary electrochromatography (OT-CEC) separation has not been explored yet. Herein, we report the first example of the in-situ growth of UiO-66-NH₂ onto the capillary for open-tubular capillary electrochromatography. UiO-66-NH₂ consists of ZrCl₄ and 2-amino-1,4-benzenedicarboxylic acid, which is highly porous and stable in a variety of solvents. The prepared UiO-66-NH₂ modified capillary was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectra (FT-IR), and the results confirmed the successful growth of the UiO-66-NH₂ . The baseline separation of chlorobenzenes, phenoxyacids and two groups of phenols was achieved owing to the combined interaction of π-π interaction, hydrophobic interaction, molecular sieve effect, electrophoretic migration and hydrogen-bonding interaction etc. Besides, the prepared capillaries showed good reproducibility, with relative standard deviations (RSDs) for intra-day, inter-day and column-to-column runs in the range of 1.38-2.60%, 3.39-4.05%, and 3.47-5.03%, respectively. Our work indicates Zr(IV)-based MOFs are promising materials as stationary phase in CEC separation.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.

Recent developments in open tubular capillary electrochromatography from 2016 to 2017

Interest in open-tubular capillary electrochromatography (OT-CEC) continues to thrive because of the inherent advantage of OT-CEC combining the high efficiency of capillary electrophoresis and the high selectivity of high performance liquid chromatography. For the period 2016 to 2017, novel materials have been developed as first-time stationary phases for OT-CEC and are grouped in this review as polymer-based materials, frameworks, nanoparticles, graphene-based materials, and biomaterials. Coating and fabrication methods mostly rely on covalent coating strategies while non-covalent immobilisation strategies like electrostatic assembly are notably still being employed. The concern of overcoming phase ratio challenges in OT-CEC coatings have also generated adoption of combined coating strategies including multi-layering, layer-by-layer self-assembly and methods adapted from nanofilm fabrications like epitaxial growth, liquid phase deposition, or nucleation of crystal growth. The emergence of non-conventional coating characterisation methods such as transmission electron microscopy, X-ray diffraction or X-ray photoelectron spectroscopy is also discussed.

Open tubular-capillary electrochromatography: Developments and applications from 2013 to 2015

Open tubular CEC (OT-CEC) separates analyte mixtures by a combination of electrophoretic, electro-osmotic, and/or chromatographic effects. OT-CEC research is an active and growing field, with studies encompassing a wide range of investigations related to new strategies for chemical modification of the inner surface of the capillary, leading to the introduction of novel stationary phase coatings. This review has examined the literature on OT-CEC from 2013 to August 2015 and highlights the developments in the fabrication of highly selective stationary phases, based on materials that include cyclodextrin chiral selectors, graphene and graphene oxide, metal-organic frameworks, molecularly imprinted polymers, nanoparticles, nanolatex particles, nanocomposites, in situ generated polymers, block polymers, tentacle-type polymers, polyelectrolyte multilayers, polysaccharides, phospholipids, and proteins. This review, while considering the development of novel OT-CEC coating materials, specifically examines different immobilization or coating methodologies and approaches and also discusses the separation mechanisms that occur with these new materials. These OT-CEC coatings are intended mainly to separate low molecular weight molecules relevant to the pharmaceutical, agricultural, and food industries as well as for use in environmental monitoring.

Separation of small organic molecules using covalent organic frameworks-LZU1 as stationary phase by open-tubular capillary electrochromatography

Covalent organic frameworks (COFs) have attracted much attention because of their permanent nanoscale porosity and higher surface area compared to zeolites as well as robustness. COFs have great potential in several fields such as hydrogen storage, gas separation, and catalysis. However, COFs have not yet been applied in capillary electrochromatography. Herein, covalent organic frameworks-LZU1 (COF-LZU1) was used as the stationary phase in open-tubular capillary electrochromatography for the first time. Compared to the monoliths used in electrochromatography, the preparation technique of a COF-LZU1-coated capillary was simple and practical. The baseline separation of model analytes including alkylbenzenes, polyaromatic hydrocarbons, and anilines by the COF-LZU1-coated capillary was achieved based on the size selectivity of COF-LZU1 porous structure and hydrophobic interactions between the model analytes and organic ligands of COF-LZU1. The load capacity of the COF-LZU1-coated capillary for naphthalene was 0.6mg/mL. For three consecutive runs, the intraday relative standard deviations (RSDs) were 1.4-2.6% for the migration time and 2.7-8.7% for the peak area. The interday RSDs were 1.3-3.9% for the migration time and 3.7-9.7% for the peak area. The column-to-column reproducibility of migration time was in the range 1.0-3.9%. Moreover, the coated capillary was used for >300 runs with no changes in the separation efficiency. Thus, COFs have great potential in capillary electrochromatography and may provide a new method for chromatographic separation.

Separation of amino acid enantiomers by a capillary modified with a metal–organic framework

Covalent bonding of homochiral metal–organic framework in capillaries for amino acid enantiomer separation by capillary electrochromatography.

Preparation of Highly Porous Coordination Polymer Coatings on Macroporous Polymer Monoliths for Enhanced Enrichment of Phosphopeptides

We describe a protocol for the preparation of hybrid materials based on highly porous coordination polymer coatings on the internal surface of macroporous polymer monoliths. The developed approach is based on the preparation of a macroporous polymer containing carboxylic acid functional groups and the subsequent step-by-step solution-based controlled growth of a layer of a porous coordination polymer on the surface of the pores of the polymer monolith. The prepared metal-organic polymer hybrid has a high specific micropore surface area. The amount of iron(III) sites is enhanced through metal-organic coordination on the surface of the pores of the functional polymer support. The increase of metal sites is related to the number of iterations of the coating process. The developed preparation scheme is easily adapted to a capillary column format. The functional porous polymer is prepared as a self-contained single-block porous monolith within the capillary, yielding a flow-through separation device with excellent flow permeability and modest back-pressure. The metal-organic polymer hybrid column showed excellent performance for the enrichment of phosphopeptides from digested proteins and their subsequent detection using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The presented experimental protocol is highly versatile, and can be easily implemented to different organic polymer supports and coatings with a plethora of porous coordination polymers and metal-organic frameworks for multiple purification and/or separation applications.

Zeolitic imidazolate metal organic framework ZIF-8 with ultra-high adsorption capacity bound tetracycline in aqueous solution

Synthetic process of ZIF-8 and a mechanism of tetracycline bound to ZIF-8 due to electrostatic attraction and π–π stacking interaction.