Estrogenic compounds determination in water samples by dispersive liquid–liquid microextraction and micellar electrokinetic chromatography coupled to mass spectrometry

Dispersive liquid-liquid microextraction followed by sweeping micellar electrokinetic chromatography-tandem mass spectrometry for determination of six breast cancer drugs in human plasma

Herein, we have developed a novel method of aqueous-sample dispersive liquid-liquid microextraction (AqS-DLLME) followed by sweeping micellar electrokinetic chromatography-tandem mass spectrometry (MEKC-MS/MS) for simultaneous determination of breast cancer drugs letrozole, anastrozole, palbociclib, ribociclib, abemaciclib, and fulvestrant in human plasma. Coupling of MEKC to MS was possible due to the use of ammonium perfluorooctanoate (APFO) as a volatile surfactant. The MEKC and MS conditions were optimized to achieve a fast, sensitive, selective, and green analysis enabling full separation of the analytes within 16 min. Electrophoretic buffer was 125 mM APFO at apparent pH 10.5 in 32 % MeOH, while sheath liquid was 70 % MeOH with 0.2 % formic acid, delivered at 10 µL/min. Excellent extraction recoveries from plasma ranging from 89.4 to 104.9 % were obtained with a combination of protein precipitation and DLLME. The developed method was validated according to the ICH guidelines. Remarkable selectivity, accuracy (bias < 6.7 %), precision (RSD < 15.8 %), and stability (bias < 10.4 %) with insignificant matrix effect (RSD < 14.0 %) and no carry-over were obtained over a wide range of concentrations. Linearity with inter-day slope RSD lower than 8.7 % was demonstrated. With this method, very low concentrations could be detected after the injection of only 68.7 nL of the sample. The method was applied to plasma samples from six women currently receiving breast cancer treatment. Determined concentrations of the drugs of interest agreed with concentrations found in clinical studies, thus proving the suitability of the developed method for therapeutic drug monitoring as a superior alternative to published LC-MS methods.

Advancements in Sample Preparation Methods for the Chromatographic and Mass Spectrometric Determination of Zearalenone and Its Metabolites in Food: An Overview

Zearalenone and its metabolites are mycotoxins generated by Fusarium species while crops are growing and can typically be found in various foods, posing a risk to human health. Governments have implemented stricter regulations concerning the permissible levels of zearalenone in food products to safeguard public health. Stricter regulations on zearalenone levels in food have been implemented. However, detecting zearalenone and its metabolites remains challenging due to sample complexity and interference. Surprisingly few reviews of sample preparation methods for zearalenone in food have appeared in the past decade. In this overview, we outline the most recent developments in the sample pre-treatment technology of zearalenone and its metabolites in food samples based on chromatography-mass spectrometry methods since 2012. This review covers some prominent technologies, such as liquid-liquid extraction-based methods, solid-phase extraction-based methods, and QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction, providing valuable insights into their advantages and limitations for potential applications. The assessment of the methods discussed, along with an overview of current challenges and prospects, will guide researchers in advancing the field and ensuring safer food quality for consumers worldwide.

Magnetic Rubber@ magnesium aluminum layered double hydroxide as nanostructured sorbent; application in determination of estrogenic hormones and bisphenol A

A magnetic solid-phase extraction (MSPE) method was developed for the enrichment of trace amounts of estrone (E1), 17-β-estradiol (E2) and bisphenol A (BPA) from aqueous samples using the Rubber-Fe3O4@SiO2@Mg-Al Layered double hydroxide followed by determination by HPLC. The proposed sorbent was characterized by X-ray diffraction, Field emission scanning electron microscopy, Fourier transform infrared spectroscopy, Vibrating-sample magnetometer, Thermal gravimetric analysis, N2 adsorption/desorption Brunauer-Emmett-Teller surface analysis, Barrett-Joyner-Halenda pore size analysis and Energy dispersive X-ray spectroscopy. Factors affecting the extraction efficiency such as pH, ionic strength, extraction temperature and time, desorption solvent and time were optimized. The limit of detection and quantification were obtained as 0.33, 1 µg L-1 for the E1 and E2 and BPA, respectively. Also, linear range of the method were 1-150, 1-100 and 1-150 µg L-1for E1, E2, and BPA, respectively. Relative standard deviations (RSD%) for the repeatability of extraction on one sorbent were obtained as 2.98, 1.31 and 3.50%, also, sorbent to sorbent repeatability were investigated and RSD% values were obtained as 7.58, 8.35 and 8.12% for E1, E2 and BPA, respectively.

Simultaneous detection of zearalenone, citrinin, and ochratoxin A in pepper by capillary zone electrophoresis

In the present study, a simple and fast method for simultaneous detection of zearalenone, citrinin, and ochratoxin A utilising capillary zone electrophoresis with an ultraviolet detector was developed. The optimised approach was validated and applied using pepper samples. The proposed method yielded satisfactory linearity between the signal and the mycotoxin concentration in the range of 1.5-150 μg/kg for zearalenone, 4.5-150 μg/kg for citrinin, and 0.8-150 μg/kg for ochratoxin A. The limits of detection for these mycotoxins ranged from 0.3 to 1.5 μg/kg. The corresponding intra- and inter-day precisions were less than 3.5 % and 4.1 %, respectively. Moreover, the matrix effect was also assessed and the result was compared using the capillary zone electrophoresis and high-performance liquid chromatography methods. The developed approach could be used for simultaneous detection of zearalenone, citrinin, and ochratoxin A in pepper.

Solid-phase extraction followed by deep eutectic solvent based dispersive liquid–liquid microextraction and GC-MS detection of the estrogenic compounds in wastewater samples

SPE combined with deep eutectic solvent based dispersive liquid–liquid microextraction has been developed as a sensitive technique for the ultra preconcentration of estrogenic compounds in wastewater samples prior to their analysis by GC-MS.

Application of Switchable Hydrophobicity Solvents for Extraction of Emerging Contaminants in Wastewater Samples

In the present work, the effectiveness of switchable hydrophobicity solvents (SHSs) as extraction solvent (N,N-Dimethylcyclohexylamine (DMCA), N,N-Diethylethanamine (TEA), and N,N-Benzyldimethylamine (DMBA)) for a variety of emerging pollutants was evaluated. Different pharmaceutical products (nonsteroidal anti-inflammatory drugs (NSAIDs), hormones, and triclosan) were selected as target analytes, covering a range of hydrophobicity (LogP) of 3.1 to 5.2. The optimized procedure was used for the determination of the target pharmaceutical analytes in wastewater samples as model analytical problem. Absolute extraction recoveries were in the range of 51% to 103%. The presented method permits the determination of the target analytes at the low ng mL-1 level, ranging from 0.8 to 5.9 (except for Triclosan, 106 ng mL-1) with good precision (relative standard deviation lower than 6%) using high-pressure liquid chromatography (HPLC) combined with ultraviolet (DAD) and fluorescence (FLR) detection. The microextraction alternative resulted in a fast, simple, and green method for a wide variety of analytes in environmental water sample. The results suggest that this type of solvent turns out to be a great alternative for the determination of different analytes in relatively complex water samples.

Detection of contaminants in water supply: A review on state-of-the-art monitoring technologies and their applications

Water monitoring technologies are widely used for contaminants detection in wide variety of water ecology applications such as water treatment plant and water distribution system. A tremendous amount of research has been conducted over the past decades to develop robust and efficient techniques of contaminants detection with minimum operating cost and energy. Recent developments in spectroscopic techniques and biosensor approach have improved the detection sensitivities, quantitatively and qualitatively. The availability of in-situ measurements and multiple detection analyses has expanded the water monitoring applications in various advanced techniques including successful establishment in hand-held sensing devices which improves portability in real-time basis for the detection of contaminant, such as microorganisms, pesticides, heavy metal ions, inorganic and organic components. This paper intends to review the developments in water quality monitoring technologies for the detection of biological and chemical contaminants in accordance with instrumental limitations. Particularly, this review focuses on the most recently developed techniques for water contaminant detection applications. Several recommendations and prospective views on the developments in water quality assessments will also be included.

Fully compatible and ultra-sensitive micellar electrokinetic chromatography-tandem mass spectrometry using sheathless porous-tip interfacing

The on-line coupling of micellar electrokinetic chromatography and mass spectrometry (MEKC-MS) is often hampered by incompatibility problems leading to reduced separation performance and unfavorable limits of detection (LODs). Here we propose a new selective and highly sensitive MEKC-MS/MS method employing a sheathless porous-tip interface in combination with a micellar phase comprised of semi-volatile surfactant molecules. Carbamate pesticides (CRBs) were selected as representative model compounds being neutral toxic pollutants potentially present at trace levels in environmental water samples. A background electrolyte of 75mM perfluorooctanoic acid adjusted to pH 9.0 with ammonium hydroxide allowed efficient separation of 15 CRBs and appeared fully compatible with electrospray ionization (ESI)-MS. Interfacing parameters, such as the distance between the capillary tip and mass-spectrometer inlet, ESI voltage, and dry gas temperature and flow were optimized in order to attain good spray stability and high analyte signal-to-noise ratios. For CRBs the LODs ranged from 0.2 to 3.9ngL^-1 (13nL injected, i.e., 2% of capillary volume), representing an improvement for certain CRBs of more than 300-fold when compared with conventional sheath-liquid interfacing. Good linearity (R²>0.99) and satisfactory reproducibility were obtained for all CRBs with interday RSD values for peak area and migration time of 4.0-11.3% and below 1.5%, respectively. Analysis of spiked mineral water showed that the new MEKC-MS/MS method allows selective and quantitative determination of CRB concentrations below the maximum residue limit of 100ngL^-1 without the need for sample preconcentration.

Recent progress of sample stacking in capillary electrophoresis (2014-2016)

The term "sample stacking" comprises a relatively broad spectrum of techniques that already form an almost inherent part of the methodology of CZE. Their principles are different but the effect is the same: concentration of a diluted analyte into a narrow zone and considerable increase of the method sensitivity. This review brings a survey of papers on electrophoretic sample stacking published approximately since the second quarter of 2014 till the first quarter of 2016. It is organized according to the principles of the stacking methods and includes chapters aimed at the concentration adjustment principle (Kohlrausch stacking), techniques based on pH changes, micellar methods, and other stacking techniques. Not reviewed are papers on transient ITP that are covered by another review in this issue.

Recent Advances in chemistry and pharmacology of 2-methoxyestradiol: An anticancer investigational drug

2-Methoxyestradiol (2ME2), an estrogen hormone metabolite is a potential cancer chemotherapeutic agent. Presently, it is an investigational drug under various phases of clinical trials alone or in combination therapy. Its anticancer activity has been attributed to its antitubulin, antiangiogenic, pro-apoptotic and ROS induction properties. This anticancer drug candidate has been explored extensively in last twenty years for its detailed chemistry and pharmacology. Present review is an update of its chemistry and biological activity. It also extends an assessment of potential of 2ME2 and its analogues as possible anticancer drug in future.

Liquid phase microextraction based on the solidification of a floating ionic liquid combined with high-performance liquid chromatography for the preconcentration of phthalate esters in environmental waters and in bottled beverages

Liquid-phase microextraction based on the solidification of floating ionic liquids.

Estrogens determination in wastewater samples by automatic in-syringe dispersive liquid-liquid microextraction prior silylation and gas chromatography

A new procedure for the extraction, preconcentration and simultaneous determination of the estrogens most used in contraception pharmaceuticals (estrone, 17β-estradiol, estriol, and 17α-ethynylestradiol), cataloged as Contaminants of Emergent Concern by the Environmental Protection Agency of the United States (US-EPA), is proposed. The developed system performs an in-syringe magnetic stirring-assisted dispersive liquid-liquid microextraction (in-syringe-MSA-DLLME) prior derivatization and gas chromatography (GC-MS). Different extraction (carbon tetrachloride, ethyl acetate, chloroform and trichloroethylene) and disperser solvents (acetone, acetonitrile and methanol) were tested. Chloroform and acetone were chosen as extraction and disperser solvent, respectively, as they provided the best extraction efficiency. Then, a multivariate optimization of the extraction conditions was carried out. Derivatization conditions were also studied to ensure the conversion of the estrogens to their respective trimethylsilyl derivatives. Low LODs and LOQs were achieved, i.e. between 11 and 82ngL(-1), and 37 and 272ngL(-1), respectively. Good values for intra and inter-day precision were obtained (RSDs≤7.06% and RSD≤7.11%, respectively). The method was successfully applied to wastewater samples.

Preparation of an allyloxy-cucurbit[6]uril-modified polymer monolithic column for microextraction of estrogens in cosmetics

An allyloxy-cucurbit[6]uril modified poly(butyl methacrylate-co-ethylene dimethacrylate) monolithic column was prepared and used for the microextraction of estrogens in cosmetics coupled with HPLC-DAD.

Developments in mycotoxin analysis: an update for 2013-2014

This review highlights developments in the determination of mycotoxins over a period between mid-2013 and mid-2014. It continues in the format of the previous articles of this series, emphasising on analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone. The importance of proper sampling and sample preparation is briefly addressed in a dedicated section, while another chapter summarises new methods used to analyse botanicals and spices. As LC-MS/MS instruments are becoming more and more widespread in the determination of multiple classes of mycotoxins, another section is focusing on such newly developed multi-mycotoxin methods. While the wealth of published methods during the 12 month time span makes it impossible to cover every single one, this exhaustive review nevertheless aims to address and briefly discuss the most important developments and trends.