Determination of bronchoalveolar lavage bile acids by solid phase microextraction liquid chromatography–tandem mass spectrometry in combination with metabolite profiling: Comparison with enzymatic assay

Solid Phase Microextraction—A Promising Tool for Graft Quality Monitoring in Solid Organ Transplantation

Solid organ transplantation is a life-saving intervention for patients suffering from end-stage organ failure. Although improvements in surgical techniques, standards of care, and immunosuppression have been observed over the last few decades, transplant centers have to face the problem of an insufficient number of organs for transplantation concerning the growing demand. An opportunity to increase the pool of organs intended for transplantation is the more frequent use of organs from extended criteria and the development of analytical methods allowing for a better assessment of the quality of organs to minimize the risk of post-transplant organ injury and rejection. Therefore, solid-phase microextraction (SPME) has been proposed in various studies as an effective tool for determining compounds of significance during graft function assessment or for the chemical profiling of grafts undergoing various preservation protocols. This review summarizes how SPME addresses the analytical challenges associated with different matrices utilized in the peri-transplant period and discusses its potential as a diagnostic tool in future work.

Bile Acid Detection Techniques and Bile Acid-Related Diseases

Bile acid is a derivative of cholinergic acid (steroidal parent nucleus) that plays an important role in digestion, absorption, and metabolism. In recent years, bile acids have been identified as signaling molecules that regulate self-metabolism, lipid metabolism, energy balance, and glucose metabolism. The detection of fine changes in bile acids caused by metabolism, disease, or individual differences has become a research hotspot. At present, there are many related techniques, such as enzyme analysis, immunoassays, and chromatography, that are used for bile acid detection. These methods have been applied in clinical practice and laboratory research to varying degrees. However, mainstream detection technology is constantly updated and replaced with the passage of time, proffering new detection technologies. Previously, gas chromatography (GS) and gas chromatography-mass spectrometry (GC-MS) were the most commonly used for bile acid detection. In recent years, high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) has developed rapidly and has gradually become the mainstream bile acid sample separation and detection technology. In this review, the basic principles, development and progress of technology, applicability, advantages, and disadvantages of various detection techniques are discussed and the changes in bile acids caused by related diseases are summarized.

Advances in the analytical methods for the determination of fluorinated aromatic carboxylic acids in aqueous matrices: A review

Fluorobenzoic acids are critically important chemical tracers in hydrothermal, geothermal, leaching, and oilfield applications. Particularly in oilfield applications, these tracers are used to investigate fluid flow paths between injector wells and producer wells, providing valuable information about the enhanced oil recovery process of the oil reservoirs. The detection limit of tracers is a vital subject in field reservoir work because the amount of chemical tracer that must be injected into the injector well is directly related to the amount detected at the producer well after migration and diffusion. The popularity of fluorinated benzoic acids as the tracers is due to their non-toxicity over radioactive tracers and low detection limit, which is determined using analytical techniques. This review focuses on the improvements/developments in extraction techniques such as solid-phase extraction and determination techniques such as gas chromatography coupled with mass spectrometry, liquid chromatography with mass spectrometry, isotope dilution gas chromatography-mass spectrometry, high-performance liquid chromatography, ion chromatography coupled with electrospray mass spectrometry, and so on for the analysis of fluorinated benzoic acids to achieve the lowest possible limit of concentration.

Analysis of bile acids in human biological samples by microcolumn separation techniques: A review

Bile acids are a group of compounds essential for lipid digestion and absorption with a steroid skeleton and a carboxylate side chain usually conjugated to glycine or taurine. Bile acids are regulatory molecules for a number of metabolic processes and can be used as biomarkers of various disorders. Since the middle of the twentieth century, the detection of bile acids has evolved from simple qualitative analysis to accurate quantification in complicated mixtures. Advanced methods are required to characterize and quantify individual bile acids in these mixtures. This article overviews the literature from the last two decades (2000-2020) and focuses on bile acid analysis in various human biological samples. The methods for sample preparation, including the sample treatment of conventional (blood plasma, blood serum, and urine) and unconventional samples (bile, saliva, duodenal/gastric juice, feces, etc.) are shortly discussed. Eventually, the focus is on novel analytical approaches and methods for each particular biological sample, providing an overview of the microcolumn separation techniques, such as high-performance liquid chromatography, gas chromatography, and capillary electrophoresis, used in their analysis. This is followed by a discussion on selected clinical applications.

Solid-phase microextraction: An appealing alternative for the determination of endogenous substances - A review

The determination of endogenous substances is of great significance for obtaining important biotic information such as biological components, metabolic pathways and disease biomarkers in different living organisms (e.g. plants, insects, animals and humans). However, due to the complex matrix and the trace concentrations of target analytes, the sample preparation procedure is an essential step before the analytes of interest are introduced into a detection instrument. Solid-phase microextraction (SPME), an emerging sample preparation technique that integrates sampling, extraction, concentration, and sample introduction into one step, has gained wide acceptance in various research fields, including in the determination of endogenous compounds. In this review, recent developments and applications of SPME for the determination of endogenous substances over the past five years are summarized. Several aspects, including the design of SPME devices (sampling configuration and coating), applications (in vitro and in vivo sampling), and coupling with emerging instruments (comprehensive two-dimensional gas chromatography (GC × GC), ambient mass spectrometry (AMS) and surface enhanced Raman scattering (SERS)) are involved. Finally, the challenges and opportunities of SPME methods in endogenous substances analysis are also discussed.

Detection technologies and metabolic profiling of bile acids: a comprehensive review

Bile acids (BAs) are important regulatory factors of life activities, which are involved in the regulation of glucose, lipid and energy metabolisms, and closely associated with intestinal hormones, microbiotas and energy balance. BAs abnormalities easily lead to inflammation and metabolic diseases, in turn, the progress of diseases could influence characteristics of BAs. Therefore, accurate detection of BAs contents is of great significance to disease prevention, diagnosis and treatment. At present, the most widely used enzymatic method in clinical practice is applicable to the detection of total bile acid (TBA). In laboratory research, different types of BAs can be accurately separated and quantified by liquid chromatography-mass spectrometry (LC-MS). The metabolic profiling of BAs based on detection technologies can completely and accurately monitor their types and contents, playing a crucial role in disease prevention, diagnosis and treatment. We herein reviewed the main detection technologies of BAs and the application of metabolic profiling in related diseases in recent years.

Aspiration techniques for bronchoalveolar lavage in translational respiratory research: Paving the way to develop novel therapeutic moieties

Bronchoalveolar lavage (BAL) is a simple, yet informative tool in understanding the immunopathology of various lung diseases via quantifying various inflammatory cells, cytokines and growth factors. At present, this traditional method is often blended with several robust and sophisticated molecular and biological techniques sustaining the significance and longevity of this technique. Crucially, the existence of slightly distinct approaches and variables employed at different laboratories around the globe in performing BAL aspiration indeed demands an utmost need to optimize and develop an effective, cost-effective and a reproducible technique. This mini review will be of importance to the biological translational scientist, particularly respiratory researchers in understanding the fundamentals and approaches to apply and consider with BAL aspiration techniques. This will ensure generating a meaningful and clinically relevant data which in turn accelerate the development of new and effective therapeutic moieties for major respiratory conditions.

High throughput solid phase microextraction: A new alternative for analysis of cellular lipidome?

A new SPME method for untargeted lipidomic study of cell line cultures was proposed for the first time. In this study the feasibility to monitor changes in lipid profile after external stimuli was demonstrated and compared to the conventional Bligh & Dyer method. The human hepatocellular carcinoma (HCC) cell line was used as a model. The obtained results provided a list of up-regulated and down-regulated lipids through a comparison between control (non-stimulated) cells versus the group of cells treated with polyunsaturated fatty acid (20:5). Use of the SPME technique yielded a list of 77 lipid species whose concentrations were recognized to be significantly different between control and treated cells, from which 63 lipids were up-regulated in treated cells. In general, the list was comparable to the peer list obtained by the Bligh & Dyer method. However, more diversity of lipid classes and subclasses such as LPC, sphingomyelins, ceramides, and prenol lipids were observed with the application of the SPME method. Method precision for the SPME approach was within the acceptable analytical range (5-18% RSD) for all detected lipids, which was advantageous over solvent extraction applied. The evaluation of ionization efficiency indicated no matrix effect for the SPME technique, while Bligh & Dyer presented significant ionization suppression for low abundant species such as LysoPC, PG, ceramides, and sphingomyelins, and ionization enhancement for high abundant phospholipids such as PE.

Solid-phase microextraction technology for in vitro and in vivo metabolite analysis

Analysis of endogenous metabolites in biological samples may lead to the identification of biomarkers in metabolomics studies. To achieve accurate sample analysis, a combined method of continuous quick sampling and extraction is required for online compound detection. Solid-phase microextraction (SPME) integrates sampling, extraction and concentration into a single solvent-free step for chemical analysis. SPME has a number of advantages, including simplicity, high sensitivity and a relatively non-invasive nature. In this article, we reviewed SPME technology in in vitro and in vivo analyses of metabolites after the ingestion of herbal medicines, foods and pharmaceutical agents. The metabolites of microorganisms in dietary supplements and in the gastrointestinal tract will also be examined. As a promising technology in biomedical and pharmaceutical research, SPME and its future applications will depend on advances in analytical technologies and material science.

Recent applications of CE- and HPLC-MS in the analysis of human fluids

The present review intends to cover the literature on the use of CE-/LC-MS for the analysis of human fluids, from 2010 until present. It has been planned to provide an overview of the most recent practical applications of these techniques to less extensively used human body fluids, including, bronchoalveolar lavage fluid, synovial fluid, nipple aspirate, tear fluid, breast fluid, amniotic fluid, and cerumen. Potential pitfalls related to fluid collection and sample preparation, with particular attention to sample clean-up procedures, and methods of analysis, from the research laboratory to a clinical setting will also be addressed. While being apparent that proteomics/metabolomics represent the most prominent approaches for global identification/quantification of putative biomarkers for a variety of human diseases, evidence is also provided of the suitability of these sophisticated techniques for the detection of heterogeneous components carried by these fluids.