Crosslinked structurally-tuned polymeric ionic liquids as stationary phases for the analysis of hydrocarbons in kerosene and diesel fuels by comprehensive two-dimensional gas chromatography

Polymeric ionic liquids containing copper(I) and copper(II) ions as gas chromatographic stationary phases for olefin separations

Copper(I) ions (Cu+) are used in olefin separations due to their olefin complexing ability and low cost, but their instability in the presence of water and gases limits their widespread use. Ionic liquids (ILs) have emerged as stabilizers of Cu+ ions and prevent their degradation, providing high olefin separation efficiency. There is limited understanding into the role that polymeric ionic liquids (PILs), which possess similar structural characteristics to ILs, have on Cu+ ion-olefin interactions. Moreover, copper ions with diverse oxidation states, including Cu+ and Cu2+ ions, have been rarely employed for olefin separations. In this study, gas chromatography (GC) is used to investigate the interaction strength of olefins to stationary phases composed of the 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C6MIM+][NTf2-]) IL and the poly(1-hexyl-3-vinylimidazolium [NTf2-]) (poly([C6VIM+][NTf2-])) PIL containing monovalent and divalent copper salts (i.e., [Cu+][NTf2-] and [Cu2+]2[NTf2-]). The chromatographic retention of alkenes, alkynes, dienes, and aromatic compounds was examined. Incorporation of the [Cu2+]2[NTf2-] salt into a stationary phase comprised of poly(dimethylsiloxane) resulted in strong retention of olefins, while its addition to the [C6MIM+][NTf2-] IL and poly([C6VIM+][NTf2-]) PIL allowed for the interaction strength to be modulated. Olefins exhibited greater affinities toward IL and PIL stationary phases containing the [Cu2+]2[NTf2-] salt compared to those with the [Cu+][NTf2-] salt. Elimination of water from both copper salts was observed to be an important factor in promoting olefin interactions, as evidenced by increased olefin retention upon exposure of the stationary phases to high temperatures. To evaluate the long-term thermal stability of the stationary phase, chromatographic retention of probes was measured on the [Cu2+]2[NTf2-]/[C6MIM+][NTf2-] IL stationary phase after its exposure to helium at a temperature of 110 °C.

Comparison of olefin/paraffin separation by ionic liquid and polymeric ionic liquid stationary phases containing silver(I) ion using one-dimensional and multidimensional gas chromatography

Silver(I) ions have been used in various studies as components within polymer membranes or ionic liquids (ILs) to enable separation of olefins from paraffins. Polymeric ionic liquids (PILs) are a class of polymers synthesized from IL monomers and typically possess higher thermal and chemical stability than the ILs from which they are formed. Until now, very little is known about the difference in strength of silver(I) ion-olefin interactions when they take place in an IL compared to a PIL. In this work, the chromatographic separation of olefins by stationary phases composed of silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag⁺][NTf₂^-]) incorporated into the 1-hexyl-3-methylimidazolium NTf₂ ([HMIM⁺][NTf₂^-]) IL and poly(1-hexyl-3-vinylimidazolium NTf₂) (poly([HVIM⁺][NTf₂^-])) PIL at varying concentrations was investigated. Olefins were more highly retained by silver(I) ions in PILs than in ILs as the silver(I) salt concentration in the stationary was increased. The potential separation power of silver(I)-containing IL and PIL stationary phases in comprehensive two-dimensional gas chromatography (GC×GC) was compared to the conventional one-dimensional system. The separation selectivity of alkenes and alkynes from paraffins was significantly increased, while dienes and aromatic compounds showed insignificant changes in retention. The chemical structural features of IL and PIL that enhance silver(I) ion stability and olefin separation were investigated by using silver(I) trifluoromethanesulfonate ([Ag⁺][OTf^-]), 1-decyl-3-methylimidazolium NTf₂ ([DMIM⁺][NTf₂^-]) IL, poly(1-decyl-3-vinylimidazolium NTf₂ (poly([DVIM⁺][NTf₂^-])) PIL, [HMIM⁺][OTf^-] IL and poly([HVIM⁺][OTf^-]) PIL. Longer alkyl substituents appended to the IL (and PIL) cation increased the strength of silver(I) olefin interaction, and [OTf^-] anions in the IL (and PIL) tended to preserve silver(I) ion from thermal reduction, while also retaining olefins less than the [NTf₂^-]-containing columns. In general, silver(I) ions in PILs possessing analogous chemical structures to ILs exhibited higher silver(I) ion-olefin interaction strength but were less thermally stable.

Recent advances in poly(ionic liquid)s for biomedical application

Poly(ionic liquid)s (PILs) are polymers containing ions in their side-chain or backbone, and the designability and outstanding physicochemical properties of PILs have attracted widespread attention from researchers. PILs have specific characteristics, including negligible vapor pressure, high thermal and chemical stability, non-flammability, and self-assembly capabilities. PILs can be well combined with advanced analytical instruments and technology and have made outstanding contributions to the development of biomedicine aiding in the continuous advancement of science and technology. Here we reviewed the advances of PILs in the biomedical field in the past five years with a focus on applications in proteomics, drug delivery, and development. This paper aims to engage pharmaceutical and biomedical scientists to full understand PILs and accelerate the progress from laboratory research to industrialization.

Polymeric Ionic Liquids Derived from L-Valine for the Preparation of Highly Selective Silica-Supported Stationary Phases in Gas Chromatography

A series of silica-supported polymeric ionic liquid (PIL)-based stationary phases derived from a vinylic L-valine ionic liquid monomer and divinylbenzene (DVB) as the crosslinking agent have been prepared and studied as gas chromatographic stationary phases. These coated gas chromatographic columns exhibited good thermal stabilities (230-300 °C) and high efficiencies (1700-2700 plates/m), and were characterized using a linear solvation parameter model in order to understand the effects of the amount of DVB on the features of the resulting composite systems. Their retention behavior and separation efficiencies were demonstrated using the Grob test. By tuning the crosslinking degree for the IL-derived stationary phase, the separation selectivity and resolution of different compounds were improved. The different retention behaviors observed for many analytes indicate that these stationary phases may be applicable as new types of GC stationary phases.

A flexible and convenient strategy for synthesis of ionic liquid bonded polysiloxane stationary phases

Ionic liquid bonded polysiloxanes (PILs) are a class of polysiloxanes whose side chains contain ionic liquid (IL) moieties. Considering their excellent selectivity and thermo-stability, PILs have great potentials in the development of polar stationary phases for gas chromatography. In this paper, a novel synthesis strategy for PILs is proposed to diversify PIL stationary phases and also facilitate the study on relationships between stationary phase structure and separation performances. The polysiloxane with imidazole groups at the side chains was synthesized firstly, and then these imidazole groups further reacted with halogenated compounds to produce various IL groups. Upon this, fifteen PIL stationary phases differing in IL content, IL group or combination of different IL groups have been synthesized and used to prepare capillary columns through static coating method. These columns have quite different general polarity indexes (the average value of all Rohrschneider-McReynolds constants in this paper) falling in a broad range from 218 to 717, and most columns have column efficiency values over 3000 plates/m. In addition, IL content, structure of the IL and combination of different IL groups have noticeable influences on interaction features of the stationary phases. After that, the separation performances of these PIL stationary phases were demonstrated by separating various mixed samples of aliphatic esters, dichloro-anilines, alcohols, aromatic amines, substituted alkanes, and so on. In order to reveal the relationship of interaction characteristics and separation performances, a set of indexes of contribution rates (CRs) is proposed. Based on CRs, the separation selectivity of the PIL stationary phases has been discussed in detail. The results indicate that there are significant differences in the separation selectivity not only between PILs and conventional polar stationary phases, but also among different PILs. All of these imply a family of practical PILs with special selectivity could be constructed upon this synthesis strategy.

Investigation of maltodextrin-based synergistic system with amino acid chiral ionic liquid as additive for enantioseparation in capillary electrophoresis

The combined use of chiral ionic liquids (ILs) and chiral selectors in capillary electrophoresis (CE) to establish a synergistic system has proven to be an effective approach for enantioseparation. In this article, tetramethylammonium-L-arginine, a kind of amino acid chiral IL, was applied to investigate its potential synergistic effect with maltodextrin in CE enantioseparation. The established maltodextrin-based synergistic system showed markedly improved enantioseparations compared with the single maltodextrin system. Parameters such as the chiral IL concentration, maltodextrin concentration, buffer pH, applied voltage, and capillary temperature were optimized. Satisfactory enantioseparation of the five studied drugs, including nefopam, duloxetine, ketoconazole, cetirizine, and citalopram was achieved in 50 mM Tris-H₃ PO₄ buffer solution (pH 3.0) containing 7.0% (m/v) maltodextrin and 60 mM tetramethylammonium-L-arginine. In addition, the chiral configuration of tetramethylammonium-L-arginine was also investigated to demonstrate the existence of a synergistic effect between chiral ILs and maltodextrin.

Establishment and molecular modeling study of maltodextrin-based synergistic enantioseparation systems with two new hydroxy acid chiral ionic liquids as additives in capillary electrophoresis

Discovering more superior performance of ionic liquids for the separation science has triggered increasing interest. In this work, two new Hydroxy acid-based chiral ionic liquids (CILs) (tertramethylammonium-d-pantothenate (TMA-d-PAN), tertramethylammonium-d-quinate (TMA-d-QUI)) were designed and first used as additives to establish the maltodextrin-based synergistic systems for enantioseparation in capillary electrophoresis (CE). Compared to traditional single maltodextrin chiral separation system, significantly improved separations of all tested drugs in the CIL/Maltodextrin synergistic systems were obtained. Some parameters (CIL concentration, maltodextrin concentration, buffer pH, and applied voltage) in the TMA-d-PAN/Maltodextrin synergistic system have been examined and optimized for analytes. The molecular docking software AutoDock was applied to simulate the recognition process and surmise feasible resolution mechanism in the Maltodextrin/CILs synergistic systems, which has certain guiding value.

Ionic liquids as stationary phases for fatty acid analysis by gas chromatography

The present paper provides an overview of the application of ionic liquid (IL) columns for GC analysis of fatty acid methyl esters (FAMEs).