Nucleic acid separations using superficially porous silica particles

Characterization of mRNA therapeutics

Therapeutic messenger RNAs (mRNAs) have emerged as powerful tools in the treatment of complex diseases, especially for conditions that lack efficacious treatment. The successful application of this modality can be attributed to its ability to encode entire proteins. While the large nature of these molecules has supported their success as therapeutics, its extended size creates several analytical challenges. To further support therapeutic mRNA development and its deployment in clinical trials, appropriate methods to support their characterization must be developed. In this review, we describe current analytical methods that have been used in the characterization of RNA quality, identity, and integrity. Advantages and limitations from several analytical techniques ranging from gel electrophoresis to liquid chromatography-mass spectrometry and from shotgun sequencing to intact mass measurements are discussed. We comprehensively describe the application of analytical methods in the measurements of capping efficiency, poly A tail analysis, as well as their applicability in stability studies.

Stability indicating ion-pair reversed-phase liquid chromatography method for modified mRNA

Modified messenger RNA (mRNA) represents a rapidly emerging class of therapeutic drug product. Development of robust stability indicating methods for control of product quality are therefore critical to support successful pharmaceutical development. This paper presents an ion-pair reversed-phase liquid chromatography (IP-RPLC) method to characterise modified mRNA exposed to a wide set of stress-inducing conditions, relevant for pharmaceutical development of an mRNA drug product. The optimised method could be used for separation and analysis of large RNA, sized up to 1000 nucleotides. Column temperature, mobile phase flow rate and ion-pair selection were each studied and optimised. Baseline separations of the model RNA ladder sample were achieved using all examined ion-pairing agents. We established that the optimised method, using 100 mM Triethylamine, enabled the highest resolution separation for the largest fragments in the RNA ladder (750/1000 nucleotides), in addition to the highest overall resolution for the selected modified mRNA compound (eGFP mRNA, 996 nucleotides). The stability indicating power of the method was demonstrated by analysing the modified eGFP mRNA, upon direct exposure to heat, hydrolytic conditions and treatment with ribonucleases. Our results showed that the formed degradation products, which appeared as shorter RNA fragments in front of the main peak, could be well monitored, using the optimised method, and the relative stability of the mRNA under the various stressed conditions could be assessed.

Optimisation of denaturing ion pair reversed phase HPLC for the purification of ssDNA in SELEX

Aptamers have shown great promise as oligonucleotide-based affinity ligands for various medicinal and industrial applications. A critical step in the production of DNA aptamers via selective enhancement of ligands by exponential enrichment (SELEX) is the generation of ssDNA from dsDNA. There are a number of caveats associated with current methods for ssDNA generation, which can lower success rates of SELEX experiments. They often result in low yields thereby decreasing diversity or fail to eliminate parasitic PCR by-products leading to accumulation of by-products from round to round. Both contribute to the failure of SELEX protocols and therefore potentially limit the impact of aptamers compared to their peptide-based antibody counterparts. We have developed a novel method using ion pair reversed phase HPLC (IP RP HPLC) employed under denaturing conditions for the ssDNA re-generation stage of SELEX following PCR. We have utilised a range of 5' chemical modifications on PCR primers to amplify PCR fragments prior to separation and purification of the DNA strands using denaturing IP RP HPLC. We have optimised mobile phases to enable complete denaturation of the dsDNA at moderate temperatures that circumvents the requirement of high temperatures and results in separation of the ssDNA based on differences in their hydrophobicity. Validation of the ssDNA isolation and purity assessment was performed by interfacing the IP RP HPLC with mass spectrometry and fluorescence-based detection. The results show that using a 5' Texas Red modification on the reverse primer in the PCR stage enabled purification of the ssDNA from its complimentary strand via IP RP HPLC under denaturing conditions. Additionally, we have confirmed the purity of the ssDNA generated as well as the complete denaturation of the PCR product via the use of mass-spectrometry and fluorescence analysis therefore proving the selective elimination of PCR by-products and the unwanted complementary strand. Following lyophilisation, ssDNA yields of up to 80% were obtained. In comparison the streptavidin biotin affinity chromatography also generates pure ssDNA with a yield of 55%. The application of this method to rapidly generate and purify ssDNA of the correct size, offers the opportunity to improve the development of new aptamers via SELEX.

Particle Size Measurement and Detection of Bound Proteins of Non-Porous/Mesoporous Silica Microspheres by Single-Particle Inductively Coupled Plasma Mass Spectrometry

Single-particle inductively coupled plasma mass spectrometry (spICP-MS) has been used for particle size measurement of diverse types of individual nanoparticles and micrometer-sized carbon-based particles such as microplastics. However, its applicability to the measurement of micrometer-sized non-carbon-based particles such as silica (SiO2) particles is unclear. In this study, the applicability of spICP-MS to particle size measurement of non-porous/mesoporous SiO2 microspheres with a nominal diameter of 5.0 µm or smaller was investigated. Particle sizes of these microspheres were measured using both spICP-MS based on a conventional calibration approach using an ion standard solution and scanning electron microscopy as a reference technique, and the results were compared. The particle size distributions obtained using both techniques were in agreement within analytical uncertainty. The applicability of this technique to the detection of metal-containing protein-binding mesoporous SiO2 microspheres was also investigated. Bound iron (Fe)-containing proteins (i.e., lactoferrin and transferrin) of mesoporous SiO2 microspheres were detected using Fe as a presence marker for the proteins. Thus, spICP-MS is applicable to the particle size measurement of large-sized and non-porous/mesoporous SiO2 microspheres. It has considerable potential for element-based detection and qualification of bound proteins of mesoporous SiO2 microspheres in a variety of applications.

Nucleic acid degradation as barrier to gene delivery: a guide to understand and overcome nuclease activity

Gene therapy is on its way to revolutionize the treatment of both inherited and acquired diseases, by transferring nucleic acids to correct a disease-causing gene in the target cells of patients. In the fight against infectious diseases, mRNA-based therapeutics have proven to be a viable strategy in the recent Covid-19 pandemic. Although a growing number of gene therapies have been approved, the success rate is limited when compared to the large number of preclinical and clinical trials that have been/are being performed. In this review, we highlight some of the hurdles which gene therapies encounter after administration into the human body, with a focus on nucleic acid degradation by nucleases that are extremely abundant in mammalian organs, biological fluids as well as in subcellular compartments. We overview the available strategies to reduce the biodegradation of gene therapeutics after administration, including chemical modifications of the nucleic acids, encapsulation into vectors and co-administration with nuclease inhibitors and discuss which strategies are applied for clinically approved nucleic acid therapeutics. In the final part, we discuss the currently available methods and techniques to qualify and quantify the integrity of nucleic acids, with their own strengths and limitations.

Rapid Intact Mass Analysis and Evaluation of the Separation Potential of Microfluidic Capillary Electrophoresis Mass Spectrometry for Oligonucleotides

Oligonucleotide characterization is a rapidly advancing field in the biopharmaceutical industry. Understanding critical quality attributes, such as intact mass and impurities, requires a toolbox of analytical techniques, which commonly includes liquid chromatography-mass spectrometry (LC-MS). Oligonucleotide LC-MS analysis frequently requires sample run times upward of 15 min to achieve separation of multiple oligonucleotide species. Additionally, LC methods frequently employ mobile phase additives such as triethylamine and 1,1,1,3,3,3-hexafluoro-2-propanol that are not always desired for use in MS instrumentation. Here, microfluidic capillary electrophoresis mass spectrometry (CE-MS) via ZipChip technology was employed to enable rapid intact mass analysis of oligonucleotide single strands. Baseline separation of equal length oligonucleotides was achieved in less than 4 min. Additionally, the potential of the ZipChip platform for separation of oligonucleotide full-length products (FLPs) and their impurities was evaluated.

Optimization of orthogonal separations for the analysis of oligonucleotides using 2D-LC

Oligonucleotides are commonly analysed using one dimensional chromatography (1D-LC) to resolve and characterise manufacturing impurities, structural isomers and (in respect to emerging oligonucleotide therapeutics) drug substance and drug product. Due to low selectivity and co-elution of closely related oligonucleotides using 1D-LC, analyte resolution is challenged. This leads to the requirement for improved analytical methods. Multidimensional chromatography has demonstrated utility in a range of applications as it increases peak capacity using orthogonal separations, however there are limited studies demonstrating the 2D-LC analysis of closely related oligonucleotides. In this study we optimised OGN size and sequence based separations using a variety of 1D-LC methods and coupled these orthogonal modes of chromatography within a 2D-LC workflow. Theoretical 2D-LC workflows were evaluated for optimal orthogonality using the minimum convex hull metric. The most orthogonal workflow identified in this study was ion-pair reversed phase using tributylammonium acetate (IP-RP-TBuAA) coupled with strong anion exchange in conjunction with sodium perchlorate (SAX-NaClO4) at high mobile phase pH. We developed a heart-cut (IP-RP-TBuAA)-(SAX-NaClO4) 2D-LC method for analysis of closely related size and sequence variant OGNs and OGN manufacturing impurities. The 2D-LC method resulted in an increased orthogonality and a reduction in co-elution (or close elution). Application of a UV based reference mapping strategy in conjunction with the 2D-LC method demonstrated a reduction in analytical complexity by reducing the reliance on mass based detection methods.

Separation of long-stranded RNAs by RP-HPLC using an octadecyl-based column with super-wide pores

Messenger ribonucleic acids (mRNAs) have been used in vaccines for various diseases and are attracting attention as a new pharmaceutical paradigm. The purification of mRNAs is necessary because various impurities, such as template DNAs and transcription enzymes, remain in the crude product after mRNA synthesis. Among the various purification methods, reversed-phase high-performance liquid chromatography (RP-HPLC) is currently attracting attention. Herein, we optimized the pore size of the packing materials, the mobile phase composition, and the temperature of the process; we also evaluated changes in the separation patterns of RNA strands of various lengths via RP-HPLC. Additionally, single-stranded (50-1000 nucleotides in length) and double-stranded (80-500 base pairs in length) RNAs were separated while their non-denatured states were maintained by performing the analysis at 60 °C using triethylammonium acetate as the mobile phase and octadecyl-based RNA-RP1 with super-wide pores (> 30 nm) as the column. Furthermore, impurities in a long-stranded RNA of several thousand nucleotides synthesized by in vitro transcription were successfully separated using an RNA-RP1 column. The columns used in this study are expected to separate various RNA strands and the impurities contained in them.

Liquid chromatographic methods in the determination of inosine monophosphate dehydrogenase enzyme activity: a review

Inosine monophosphate dehydrogenase (IMPDH) is a crucial enzyme involved in the de novo synthesis of purine nucleotides. IMPDH activity is used to evaluate the pharmacodynamics/pharmacokinetics of immunosuppressant drugs such as mycophenolic acid and thiopurines. These drugs are often used to prevent organ transplant rejection and as steroid-sparing agents in autoinflammatory diseases such as inflammatory bowel disease and rheumatoid arthritis. Numerous analytical techniques have been employed to evaluate IMPDH activity in biological matrices. However, hyphenated LC techniques were most widely used in the literature. This review focuses on hyphenated LC methods used to measure IMPDH activity and provides detailed insight into the sample preparation techniques, chromatographic conditions, enzymatic assay conditions, detectors and normalization factors employed in those methods.

Simultaneous quantification of multiple RNA cargos co-loaded into nanoparticle-based delivery systems

Robust, sensitive, and versatile analytical methods are essential for quantification of RNA drug cargos loaded into nanoparticle-based delivery systems. However, simultaneous quantification of multiple RNA cargos co-loaded into nanoparticles remains a challenge. Here, we developed and validated the use of ion-pair reversed-phase high-performance liquid chromatography combined with UV detection (IP-RP-HPLC-UV) for simultaneous quantification of single- and double-stranded RNA cargos. Complete extraction of RNA cargo from the nanoparticle carrier was achieved using a phenol:chloroform:isoamyl alcohol mixture. Separations were performed using either a C₁₈ or a PLRP-S column, eluted with 0.1 M triethylammonium acetate (TEAA) solution as ion-pairing reagent (eluent A), and 0.1 M TEAA containing 25 % (v/v) CH₃CN as eluent B. These methods were applied to quantify mRNA and polyinosinic:polycytidylic acid co-loaded into lipid-polymer hybrid nanoparticles, and single-stranded oligodeoxynucleotide donors and Alt-R CRISPR single guide RNAs co-loaded into lipid nanoparticles. The developed methods were sensitive (limit of RNA quantification < 60 ng), linear (R² > 0.997), and accurate (≈ 100 % recovery of RNA spiked in nanoparticles). Hence, the present study may facilitate convenient quantification of multiple RNA cargos co-loaded into nanoparticle-based delivery systems.

Analytical techniques for characterizing diastereomers of phosphorothioated oligonucleotides

Oligonucleotides have emerged as powerful therapeutics for treating diverse diseases. To fully unlock the therapeutic potential of oligonucleotides, there is still a great need to further improve their drug-like properties. Numerous chemical modifications have been explored to achieve this goal, with phosphorothioation being one of the most widely used strategies. However, phosphorothioate modification produces diastereomers that are reported to have different properties and performances, demanding detailed characterization of these diastereomers. Here we provide an overview of phosphorothioated oligonucleotide diastereomers, covering their origin and configurations, physicochemical and pharmacological properties, and stereo-selective chemical synthesis, followed by a summary of currently available analytical techniques for characterizing these diastereomers, with a focus on liquid chromatography-based approaches, including ion-pair reversed-phase liquid chromatography, anion exchange chromatography, mixed-mode chromatography, and hybrid approaches. Non-chromatographic techniques, such as capillary electrophoresis, spectroscopy and other methods, are also being reviewed.

Assay, Purity, and Impurity Profile of Phosphorothioate Oligonucleotide Therapeutics by Ion Pair-High-Performance Liquid Chromatography-Mass Spectrometry

The relatively large molecular size, diastereoisomeric nature, and complex impurity profiles of therapeutic phosphorothioate oligonucleotides create significant analytical challenges for the quality control laboratory. To overcome the lack of selectivity inherent to traditional chromatographic approaches, an ion pair liquid chromatography-mass spectrometry (LCMS) method combining ultraviolet and mass spectrometry quantification was developed and validated for >35 different oligonucleotide drug substances and products, including several commercialized drugs. The selection of chromatographic and spectrometric conditions, data acquisition and processing, critical aspects of sample and buffer preparation and instrument maintenance, and results from method validation experiments are discussed.

Development of an ion pairing reversed-phase liquid chromatography-mass spectrometry method for characterization of clustered regularly interspaced short palindromic repeats guide ribonucleic acid

Guide ribonucleic acid (gRNA) is a critical reagent in clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 genome editing. The single stranded guide RNA (sgRNA) is the most commonly used gRNA in application. Evaluation of the impurity profile of synthetic sgRNA is important for any CRISPR genome editing experiments. However, the large molecular size, complex impurity profile and unique secondary structure pose many challenges in the analysis of sgRNA by ion pairing reversed-phase liquid chromatography (IP-RPLC), the commonly used method. In this work, we developed a generic IP-RPLC method for guide RNA analysis. We found that large pore size of stationary phase was the most critical column parameter to achieve high resolution separation of sgRNA while particle structure, particle size and surface chemistry had less impact. Our results indicated that charge interaction was the most critical mechanism for retention and mass transfer had less impact on the performance of separation. An IP-RPLC/mass spectrometry (MS) method was also developed with a specific practice to reduce adducts and enable intact MS analysis of sgRNAs. The generic IP-RPLC method demonstrates its feasibility to serve as a release, stability, characterization and in-process control testing method for synthetic sgRNA products.

Effect of ion-pairing reagent hydrophobicity on liquid chromatography and mass spectrometry analysis of oligonucleotides

We performed a systematic study of thirteen alkylamines used as ion-pairing reagents for ion-pair reversed-phase liquid chromatography (IP RP LC) separations of oligonucleotides on a C18 column. We proposed a method to classify the hydrophobicity of alkylamines by their retention in RP LC. The IP reagent hydrophobicity correlated with the retention and resolution of oligonucleotides in the corresponding IP mobile phases. The baseline resolution was achieved up to 30 mer for hydrophilic, or up to 50 mer for hydrophobic IP reagents. Hydrophobic alkylamines permitted useful oligonucleotide separations at relatively low buffer concentrations, such as 5-10 mM alkylamine-acetate IP systems. These buffers were compatible with mass spectrometry detection, however, replacement of acetic acid with hexafluoroisopropanol in the mobile phase improved the MS signal by 2-3 orders of magnitude. Experiments with native and chemically modified oligonucleotides highlighted the mixed-mode nature of IP RP LC. When using hydrophobic IP reagents, the ionic retention mechanism of oligonucleotides is enhanced while hydrophobic retention is diminished.

Ion pair-based mobile phase additives to improve the separation of alkaloids in supercritical fluid chromatography

In this study, a supercritical fluid chromatography (SFC) method based on ion pair reagents was used to separate alkaloids. The chromatographic parameters, including the stationary phase, additive type, additive concentration, outlet pressure, temperature and flow rate, were optimized. Baseline separation was completed in 20 min on an Agilent Pursuit 5 PFP column (4.6 × 150 mm) using carbon dioxide as the mobile phase and 7.5 mM sodium 1-pentanesulfonate as an additive with gradient elution at 140 bar, 60 °C, and a flow rate of 1.5 mL/min. The retention rate and resolution of the analytes were satisfactory. The limits of detection were 27.04-298.03 ng/mL, and the limits of quantification were 90.15-993.42 ng/mL. The recoveries of low and high concentrations were 77.46-111.86% and 83.84-111.00%, respectively. This ion pair additive greatly improved the separation efficiency of alkaloids. Consequently, this SFC method was successfully applied to the separation of alkaloids from Rhizoma corydalis.

Recent advances in therapeutic nucleic acids and their analytical methods

Therapeutic nucleic acids are various chemically modified RNA or DNA with different functions, which mainly play roles at the gene level. Owing to its accurately targeting at pathogenic genes, nucleic acid based therapeutics have a wide range of application prospects. Recently, the improvement on chemical synthesis and delivery materials accelerated the development of therapeutic nucleic acids rapidly. Up to now, 17 nucleic acid based therapeutics approved by Food and Drug Administration (FDA) or European Medicines Agency (EMA). The development of therapeutics raised higher requirements for analytical methods, both in quality control and in clinical research. The first part of this review introduces different classes of therapeutic nucleic acids, including antisense oligonucleotide (ASO), RNA interference (RNAi) therapy, mRNA, aptamer and other classes which are under research. The second part reviews the therapeutic nucleic acids commercialized from 2019 to now. The third part discusses the analytical methods for nucleic acid based therapeutics, including liquid chromatography-based methods, capillary gel electrophoresis (CGE), hybridization enzyme-linked immunosorbent assay (ELISA) and other infrequently used methods. Finally, the advantages and shortcomings of these methods are summarized, and the future development of analysis methods are prospected.

Purification of N-acetylgalactosamine-modified-oligonucleotides using orthogonal anion-exchange and mixed-mode chromatography approaches

N-acetylgalactosamine (GalNAc)-modified small interfering ribonucleic acids (siRNA) have shown promising outcomes for targeted siRNA delivery resulting in gene silencing in vivo; however, their structural complexity requires development of new purification methods to address high purity and recovery requirements. The current study evaluates complementary purification approaches using a mixed-mode Scherzo SS-C18 and anion-exchange (AEX) TSK-gel SuperQ-5PW for a range of single-stranded triantennary GalNAc-oligonucleotides. Initially, the semi-preparative mixed-mode support (10 × 250 mm, 3 µm) was compared against the preparative AEX analogue (21.5 × 300 mm, 13 µm), with the former affording double the recovery and higher purity of 95% over its AEX counterpart displaying 91% for a selected siRNA conjugate. An assortment of GalNAc-modified oligonucleotides was later purified using the mixed-mode resin revealing good recoveries (∼30-60%) and high purities of 90-94% ranging from straightforward to more challenging purifications. High sample loading in the 20 mg range was achieved, which was comparable with the larger preparative TSKgel SuperQ-5PW support. The Scherzo-SS-C18 resin also afforded some degree of resolution between diastereomers containing phosphorothioate functionalities. The TSKgel SuperQ-5PW support was later investigated to provide orthogonal separation selectivity to the Scherzo-SS-C18 column enabling purification of a selected, GalNAc-siRNA conjugate. The developed pH (8.5-11) and salt (0.3-0.7 M) gradients method provided enhanced separation selectivity between the free and conjugated siRNA, while minimizing formation of secondary structures and highlighting a complementary approach to deal with challenging purifications of oligonucleotide-GalNAc conjugates. Together, the use of AEX and mixed-mode columns provide much needed orthogonality to deal with complex GalNAc-modified oligonucleotides and potentially other upcoming modalities.

Analytical techniques currently used in the pharmaceutical industry for the quality control of RNA-based therapeutics and ongoing developments

The number of RNA-based therapeutics has significantly grown in number on the market over the last 20 years. This number is expected to further increase in the coming years as many RNA therapeutics are being tested in late clinical trials stages. The first part of this paper considers the mechanism of action, the synthesis and the potential impurities resulting from synthesis as well as the strategies used to increase RNA-based therapeutics efficacy. In the second part of this review, the tests that are usually performed in the pharmaceutical industry for the quality testing of antisense oligonucleotides (ASOs), small-interfering RNAs (siRNAs) and messenger RNAs (mRNAs) will be described. In the last part, the remaining challenges and the ongoing developments to meet them are discussed.

Impact of stationary-phase pore size on chromatographic performance using oligonucleotide separation as a model

A combined experimental and theoretical study was performed to understand how the pore size of packing materials with pores 60-300 Å in size affects the separation of 5-50-mer oligonucleotides. For this purpose, we developed a model in which the solutes were described as thin rods to estimate the accessible surface area of the solute as a function of the pore size and solute size. First, an analytical investigation was conducted in which we found that the selectivity increased by a factor of 2.5 when separating 5- and 15-mer oligonucleotides using packing with 300 Å rather than 100 Å pores. We complemented the analytical investigation by theoretically demonstrating how the selectivity is dependent on the column's accessible surface area as a function of solute size. In the preparative investigation, we determined adsorption isotherms for oligonucleotides using the inverse method for separations of a 9- and a 10-mer. We found that preparative columns with a 60 Å-pore-size packing material provided a 10% increase in productivity as compared with a 300 Å packing material, although the surface area of the 60 Å packing is as much as five time larger.

Characterization of therapeutic oligonucleotides by liquid chromatography

Marketed therapies in the pharmaceutical landscape are rapidly evolving and getting more diverse. Small molecule medicines have dominated in the past while antibodies have grown dramatically in recent years. However, the failure of traditional small and large molecules in accessing certain targets has led to increased R&D efforts to develop alternative modalities. Therapeutic oligonucleotides (ONs) can accurately be directed against their ribonucleic acid (RNA) target and represent a promising approach in previously untreated diseases. Established automated synthesis of ONs coupled with chemical improvements and the advance of new drug delivery technologies has recently brought ONs to a heightened level of interest. The first part of the present review describes the different classes of oligonucleotides, namely antisense oligonucleotide (ASO), small interfering RNA (siRNA), microRNA (miRNA), aptamer and immunostimulatory ON, with a focus on their delivery systems relevant for future analytical characterization. The second part reviews the typical impurities in therapeutic ON products. The third part discusses the use of historical methods anion exchange chromatography (AEX), ion-pair reversed phase liquid chromatography (IP-RP), mixed-mode chromatography (MMC) and recent analytical methodologies of hydrophilic interaction liquid chromatography (HILIC), two-dimensional liquid chromatography (2D-LC) mass spectrometry for the characterization of ASO and siRNA modalities. The effects of physicochemical properties of RPLC columns and ion-pair agents on ON separation are specifically addressed with possible future directions for method development provided. Finally, some innovative analytical developments for the analysis of siRNAs and their delivery materials to pave the way toward the use of multi-attribute methods in the near future are discussed.

Analysis of oligonucleotides by ion-pair reversed-phase liquid chromatography coupled with positive mode electrospray ionization mass spectrometry

Oligonucleotides are usually analyzed by ion-pair reversed-phase liquid chromatography (IP-RPLC) coupled with negative mode electrospray ionization mass spectrometry (ESI-MS) due to their highly negative charged phosphodiester backbones. Herein, the signal suppression effect of triethylamine (TEA) adducts caused the ion-pair reagent TEA/hexafluoroisopropanol (HFIP) is greatly alleviated after improving the in-source energy in positive mode ESI-MS. This strategy is applied for different RNA sequencing through analyzing their formic acid hydrolysates via IP-RPLC MS. Comparing with negative ion mode, we demonstrate that IP-RPLC MS analysis in positive ion mode is more suitable for RNA sequencing with fewer contaminant interferences. Finally, simultaneous online separation and detection of oligonucleotides and protein digests are achieved in positive ion mode IP-RPLC MS analysis with little interference to each other.

Oligonucleotide analysis by hydrophilic interaction liquid chromatography-mass spectrometry in the absence of ion-pair reagents

Improving our understanding of nucleic acids, both in biological and synthetic applications, remains a bustling area of research for both academic and industrial laboratories. As nucleic acids research evolves, so must the analytical techniques used to characterize nucleic acids. One powerful analytical technique has been coupled liquid chromatography - tandem mass spectrometry (LC-MS/MS). To date, the most successful chromatographic mode has been ion-pairing reversed-phase liquid chromatography. Hydrophilic interaction liquid chromatography (HILIC), in the absence of ion-pair reagents, has been investigated here as an alternative chromatographic approach to the analysis of oligonucleotides. By combining a mobile phase system using commonly employed in liquid chromatography-mass spectrometry (LC-MS) - i.e., water, acetonitrile, and ammonium acetate - and a new, commercially available diol-based HILIC column, high chromatographic and mass spectrometric performance for a wide range of oligonucleotides is demonstrated. Particular applications of HILIC-MS for the analysis of deoxynucleic acid (DNA) oligomers, modified and unmodified oligoribonucleotides, and phosphorothioate DNA oligonucleotides are presented. Based on the LC-MS performance, this HILIC-based approach provides an attractive, sensitive and robust alternative to prior ion-pairing dependent methods with potential utility for both qualitative and quantitative analyses of oligonucleotides without compromising chromatographic or mass spectrometric performance.

High resolution fingerprinting of single and double-stranded RNA using ion-pair reverse-phase chromatography

The emergence of new sustainable approaches for insect management using RNA interference (RNAi) based insecticides has created the demand for high throughput analytical techniques to fully characterise and accurately quantify double stranded RNA (dsRNA) prior to downstream RNAi applications. In this study we have developed a method for the rapid characterisation of single stranded and double stranded RNA using high resolution RNase mapping in conjunction with ion-pair reverse-phase chromatography utilising a column with superficially porous particles. The high resolution oligoribonucleotide map provides an important 'fingerprint' for identity testing and bioprocess monitoring. Reproducible RNA mapping chromatograms were generated from replicate analyses. Moreover, this approach was used to provide a method to rapidly distinguish different RNA sequences of the same size, based on differences in the resulting chromatograms. Principal components analysis of the high resolution RNA mapping data enabled us to rapidly compare multiple HPLC chromatograms and distinguish two dsRNA sequences of different size which share 72% sequence homology. We used the high resolution RNase mapping method to rapidly fingerprint biomanufactured dsRNA across a number of different batches. The resulting chromatograms in conjunction with principal components analysis demonstrated high similarity in the dsRNA produced across the different batches highlighting the potential ability of this method to provide information for batch release in a high throughput manner.

Superficially porous particles with 1000Å pores for large biomolecule high performance liquid chromatography and polymer size exclusion chromatography

To facilitate mass transport and column efficiency, solutes must have free access to particle pores to facilitate interactions with the stationary phase. To ensure this feature, particles should be used for HPLC separations which have pores sufficiently large to accommodate the solute without restricted diffusion. This paper describes the design and properties of superficially porous (also called Fused-Core^®, core shell or porous shell) particles with very large (1000Å) pores specifically developed for separating very large biomolecules and polymers. Separations of DNA fragments, monoclonal antibodies, large proteins and large polystyrene standards are used to illustrate the utility of these particles for efficient, high-resolution applications.