Selective pressurized liquid extraction of replacement and legacy brominated flame retardants from soil

Kelp forest food webs as hot spots for the accumulation of microplastic and polybrominated diphenyl ether pollutants

Kelp forests (KFs) are one of the most significant marine ecosystems in the planet. They serve as a refuge for a wide variety of marine species of ecological and economic importance. Additionally, they aid with carbon sequestration, safeguard the coastline, and maintain water quality. Microplastic (MP) and polybrominated diphenyl ethers (PBDEs) concentrations were analyzed across trophic levels in KFs around Todos Santos Bay. Spatial variation patterns were compared at three sites in 2021 and temporal change at Todos Santos Island (TSI) in 2021 and 2022. We analyzed these MPs and PBDEs in water, primary producers (Macrocystis pyrifera), grazers (Strongylocentrotus purpuratus), predators (Semicossyphus pulcher), and kelp detritus. MPs were identified in all samples (11 synthetic and 1 semisynthetic polymer) and confirmed using Fourier-transform infrared microspectroscopy-attenuated total reflectance (μ-FTIR-ATR). The most abundant type of MP is polyester fibers. Statistically significant variations in MP concentration were found only in kelps, with the greatest average concentrations in medium-depth kelps from TSI in 2022 (0.73 ± 0.58 MP g-1 ww) and in the kelp detritus from TSI in 2021 (0.96 ± 0.64 MP g-1 ww). Similarly, PBDEs were found in all samples, with the largest concentration found in sea urchins from Punta San Miguel (0.93 ± 0.24 ng g-1 ww). The similarity of the polymers can indicate a trophic transfer of MPs. This study shows the extensive presence of MP and PBDE subtropical trophic web of a KF, but correlating these compounds in environmental samples is highly complex, influenced by numerous factors that could affect their presence and behavior. However, this suggests that there is a potential risk to the systems and the services that KFs offer.

The Role of Mass Spectrometry in Protecting Public Health and the Environment from Synthetic Chemicals

Mass spectrometry (MS) has dramatically transformed environmental protection by facilitating the precise quantification and identification of pollutants. This review charts the evolution of environmental chemistry, intertwining it with advancements in analytical chemistry and MS technologies. It specifically focuses on the role of MS in studying persistent organic pollutants like organochlorine pesticides, polychlorinated biphenyls (PCBs), brominated fire retardants (BFRs), and perfluoroalkyl and polyfluoroalkyl substances (PFAS), marking significant milestones and their implications. Notably, the adoption of gas chromatography with MS in the 1970s and liquid chromatography with MS in the late 1990s profoundly expanded scientists' ability to detect complex pollutant mixtures. Over the past 50 years, the proliferation of potential pollutants has surged, necessitating more sophisticated analysis techniques, such as high-resolution mass spectrometry-nontargeted analysis (HRMS-NTA) and suspect screening. While HRMS promises to enhance the characterization of new environmental pollutants, a significant shift in chemical management strategies remains imperative. Despite technological advances, MS alone is insufficient to mitigate the risks from the continuous emergence of novel chemicals, with many potentially already present in the environment and bioaccumulating in humans.

Optimization and validation of an extraction method for the analysis of multi-class emerging contaminants in soil and sediment

Analytical methods for the determination of multi-class emerging contaminants are limited for soil and sediment while they are essential to provide a more complete picture of their distribution in the environment and to understand their fate in different environmental compartments. In this paper, we present the development and optimization of an analytical strategy that combines reliable extraction, purification and the analysis using ultra-pressure liquid chromatography triple quadrupole mass spectrometry (UPLC-MS/MS) of 90 emerging organic contaminants including pesticides, pharmaceuticals and personal care products, flame retardants, per- and polyfluoroalkyl substances (PFASs) and plasticizers in soil and sediment. To extract a wide range of chemicals, the extraction strategy is based on the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach. A number of different options were investigated (buffer, acidification, addition of EDTA, different types and combinations of dispersive SPE etc.) and the effectiveness of the chemical extraction procedure and the clean-up was assessed for two matrices: soil (organic matter content of 9%) and sediment (organic matter content of 1.9%). The method was fully validated for both matrices, in terms of accuracy, linearity, repeatability (intra-day), reproducibility (inter-day), method limits of detection and quantification (LODs and MLOQs, respectively). The final performance showed good accuracy and precision (mean recoveries were between 70 and 120% with relative standard deviations (RSD) less than 20% in most cases), low matrix effects, good linearity for the matrix-matched calibration curve (R2≥0.991) and MLOQs ranged from 0.25 and 10 µg/kg. To demonstrate the applicability and suitability of the validated method, soil and sediment samples from Vietnam, France, Sweden and Mexico were analyzed. The results showed that of the 90 target compounds, a total of 33 were quantified in the sediment and soil samples analyzed. In addition to multi-target analysis, this strategy could be suitable for non-target screening, to provide a more comprehensive view of the contaminants present in the samples.

Target and suspect analysis of liquid crystal monomers in soil from different urban functional zones

Recent studies have reported the occurrence of liquid crystal monomers (LCMs) in sediment, indoor dust, hand wipes, and human serum samples; however, information regarding their contamination status in soil is currently unavailable. The concentrations of 39 target LCMs were determined in n = 96 surface soil samples collected from five different urban functional zones including agricultural, scenic, industrial, commercial, and residential zones. We observed that 76 of 96 surface soil samples contained at least 19, 13, 16, 19, and 14 of the 39 target LCMs that were detectable in samples from agricultural, scenic, industrial, commercial, and residential zones, respectively. The LCMs in the samples from the agricultural zone exhibited the highest mean concentrations of 12.9 ng/g dry weight (dw), followed by those from commercial (5.23 ng/g dw), residential (3.30 ng/g dw), industrial (2.48 ng/g dw), and scenic zones (0.774 ng/g dw). Furthermore, strong and statistically significant (p < 0.05) correlations were observed for several pairs of LCMs (3cH2B vs. 5bcHdFB in the agricultural zone; 5bcHdFB vs. 2bcHdFB, 5bcHdFB vs. 3cH2B in the commercial zone; 5bcHdFB vs. 2bcHdFB in the industrial zone), indicating that they might have similar commercial applications and sources. Based on a newly established database containing 1173 LCMs, suspect screening was applied to discover other LCMs in these 96 soil samples using gas chromatograph coupled with quadrupole-time-of-flight mass spectrometry (GC-QTOF/MS). We tentatively identified 51 LCM formulas with 69 chemical structures. Collectively, this study provides the first evidence for the occurrence of LCMs in soil samples, and suggests that LCMs could be widely distributed across all five urban functional zones.

Brominated flame retardants (BFRs) in Western Australian biosolids and implications for land application

This study evaluates the prevalence of eight priority polybrominated diphenyl ethers (PBDEs; -28, -47, -99, -100, -153, -154, -183 and -209) and six novel brominated flame retardants (NBFRs; pentabromotoluene (PBT), pentabromoethylbenzene (PBEB), hexabromobenzene (HBB), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (EH-TBB), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) and decabromodiphenyl ethane (DBDPE)) in biosolids samples from 15 wastewater treatment plants (WWTPs) in Western Australia. Analytes were extracted using selective pressurized liquid extraction (S-PLE) and quantified by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) operated in electron impact (EI) ionization mode. ∑₈PBDE levels in biosolids ranged from 11 to 18,000 μg/kg dw with a median concentration of 1800 μg/kg dw. BDE-209 was the most prevalent congener constituting a median of 98% of ∑₈PBDE concentrations in samples with BDE-99, -47 and -100 each typically contributing less than 3% to total levels. NBFRs were detected in 71% of samples with ∑₆NBFR levels ranging between ND-1100 μg/kg dw (median; 600 μg/kg dw). Levels of DBDPE greatly exceeded those of all other NBFRs, while the next most prevalent compounds were EH-TBB and HBB. Australia produced approximately 327,000 dry tonnes of biosolids in 2017, of which approximately 75% was beneficially utilized on farmland as a fertilizer. Based on these results, an estimated 440 kg of BDE-209 and 150 kg of DBDPE are applied to agricultural land via biosolids applications annually in Australia. This study provides the first account of NBFR concentrations in Australian biosolids.

Adélie penguin colonies as indicators of brominated flame retardants (BFRs) in East Antarctica

While persistent organic pollutant (POP) contamination within Antarctica is largely caused by long-range atmospheric transport (LRAT), Antarctic research bases have been shown to be local sources of POPs such as brominated flame retardants (BFRs). This study compared concentrations of seven polybrominated diphenyl ethers (PBDE) congeners and five novel flame retardants (NBFRs) found in Adélie penguin (Pygoscelis adeliae) colony soils near the Australian research stations, Mawson and Davis, to assess the stations as local sources of these contaminants and provide a much needed baseline for contamination of BFRs in East Antarctica. Soil samples (n = 46) were collected from Adélie colonies at close proximity to the research stations as well as further afield during the 2016-17 austral summer. Samples were analysed using selective pressurised liquid extraction (S-PLE) and gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). PBDEs (BDE-28, -47, -99, -100, -153, -154 and -183) were detected in 45/46 samples with ∑₇PBDE concentrations ranging from <0.01 to 1.63 ng/g dry weight (dw) and NBFRs (2,3,4,5,6-pentabromotoluene (PBT), 2,3,4,5,6-pentabromoethylbenzene (PBEB), hexabromobenzene (HBB), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (EH-TBB) and bis(2,4,6-tribromophenoxy) ethane (BTBPE)) detected in 20/46 samples, with a range of ∑₅NBFR from not detected (ND) to 0.16 ng/g dw. Soils taken from around the Davis and Mawson research stations were more highly contaminated (n = 10) than penguin colonies (n = 27) and control areas not affiliated with breeding seabirds (n = 8). The most common congener detected was BDE-99, reflecting inputs from LRAT. However, the congener profiles of station soils supported the hypothesis that research stations are a local source of PBDEs to the Antarctic environment. In addition, the NBFR pentabromoethylbenzene (PBEB) was quantified for the first time in Antarctic soils, providing essential information for baseline contamination within the region and highlighting the need for ongoing monitoring as global regulations for the use of BFRs continuously change.

China's most typical nonferrous organic-metal facilities own specific microbial communities

The diversity and function of microorganisms have yet to be explored at non-ferrous metal mining facilities (NMMFs), which are the world’s largest and potentially most toxic sources of co-existing metal(loid)s and flotation reagents (FRs). The diversity and inferred functions of different bacterial communities inhabiting two types of sites (active and abandoned) in Guangxi province (China) were investigated for the first time. Here we show that the structure and diversity of bacteria correlated with the types of mine sites, metal(loid)s, and FRs concentrations; and best correlated with the combination of pH, Cu, Pb, and Mn. Combined microbial coenobium may play a pivotal role in NMMFs microbial life. Arenimonas, specific in active mine sites and an acidophilic bacterium, carries functions able to cope with the extreme conditions, whereas Latescibacteria specific in abandoned sites can degrade organics. Such a bacterial consortium provides new insights to develop cost-effective remediation strategies of co-contaminated sites that currently remain intractable for bioremediation.

Spatial Distribution of Novel and Legacy Brominated Flame Retardants in Soils Surrounding Two Australian Electronic Waste Recycling Facilities

Informal recycling of electronic waste (e-waste) has been shown to cause significant brominated flame retardant (BFR) contamination of surrounding soils in a number of Asian and West African countries. However, to the authors' knowledge, there have been no published studies demonstrating polybrominated diphenyl ether (PBDE) and novel brominated flame retardant (NBFR) soil contamination from regulated "formal" e-waste processing facilities in developed countries. This study reports on PBDEs (-28, -47, -99, -100, -153, -154, -183, and -209) and NBFRs (PBT, PBEB, HBB, EH-TBB, BTBPE and DBDPE) in 36 soil samples surrounding two Australian e-waste recycling plants and a further eight reference soils. Overall ∑PBDE concentrations ranged 0.10-98 000 ng/g dw (median; 92 ng/g dw) and ∑NBFRs ranged ND-37 000 ng/g dw (median 2.0 ng/g dw). Concentrations in soils were found to be significantly negatively associated with distance from one of the e-waste facilities for ∑penta-BDEs, BDE-183, BDE-209, and ∑NBFR compound groups. ANOVA tests further illustrated the potential for e-waste recycling to significantly elevate concentrations of some BFRs in soils over distances up to 900 m compared to references sites. This study provides the first evidence of soil contamination with PBDEs and NBFRs originating from formal e-waste recycling facilities in Australia, which may have implications for e-waste recycling practices throughout the world.

Concentrations of legacy and novel brominated flame retardants in indoor dust in Melbourne, Australia: An assessment of human exposure

Polybrominated diphenyl ethers (PBDEs) and novel brominated flame retardants (NBFR) have been used in a range of polymers to inhibit the spread of fires but also have a propensity to migrate out of consumer materials and contaminate indoor dust. In this study, a total of 57 dust samples were collected from 12 homes, eight offices and eight vehicles in Melbourne, Australia and analysed for eight PBDEs (-28, -47, -99, -100, -153, -154, -183 and -209) and seven NBFRs (PBT, PBEB, HBB, EH-TBB, BEH-TEBP, BTBPE and DBDPE) to determine human exposure risks from dust ingestion. Samples were analysed using selective pressurized liquid extraction (S-PLE) and gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). Legacy and replacement flame retardants were detected in all samples with overall ∑PBDE concentrations ranging from 120 to 1700,000 ng/g (median 2100 ng/g) and ∑NBFRs ranging from 1.1 to 10,000 ng/g (median 1800 ng/g). BDE-209 and DBDPE were the dominant compounds in dust samples, followed by congeners associated with commercial Penta-BDE formulations (-47, -99, -100, -153 and -154) and then EH-TBB of the FireMaster 550 and BZ-54 products. ∑Penta-BDE concentrations were elevated in office samples compared with homes and vehicles, while EH-TBB and BDE-209 measured higher concentrations in vehicles compared with their respective levels in homes and offices. Risk assessment estimates revealed the majority of exposure to occur in the home for both adults and toddlers in the City of Melbourne. Generally, body weight adjusted exposure to PBDEs and NBFRs was predicted to be 1 to 2 orders of magnitude higher for toddlers than adults. Estimated rates of BDE-47, -99, -153 and -209 ingestion were each 2 orders of magnitude or more below the USEPA's prescribed oral reference dose values (RfDs) for typical exposure scenarios. However, exposure rates for BDE-47 and -99 reached as high as 52 and 95% of RfDs, respectively, for adults and 4.4 and 7.4%, respectively, for toddlers in high exposure scenarios. This study provides the first wide-ranging survey of NBFRs in indoor dust from homes, offices and vehicles in Australia and offers further evidence of human exposure to legacy and novel brominated flame retardants via dust ingestion.

Widespread polybrominated diphenyl ether (PBDE) contamination of urban soils in Melbourne, Australia

Polybrominated diphenyl ethers (PBDEs) have been used as flame retardants in a variety of materials and products. PBDEs have been shown to accumulate in the environment and human populations while exhibiting a range of toxic effects. In this study, surface soil samples from 30 sites in the city of Melbourne, Australia, were analysed for PBDEs. Eight congeners of environmental concern (BDE-28, -47, -99, -100, -153, -154 -183 and -209) were assessed using selective pressurized liquid extraction (S-PLE) and gas chromatography coupled to triple quadrupole mass spectrometry (GC-MS/MS). PBDEs were detected in 29/30 samples with Σ₈PBDE soil concentrations ranging nd-13,200 ng/g dw and Σ₇PBDEs (excluding BDE-209) levels of nd-70.5 ng/g dw. Soils from waste disposal sites (n = 6) contained the highest median Σ₇PBDE and Σ₈PBDE concentrations, followed by manufacturing sites (n = 18) and then non-source sites (n = 6). Electronics recycling facilities contained the greatest levels of Σ₈PBDEs by a significant margin (p < 0.05) to indicate that these industries are a potential source of contamination. BDE-209 was the dominant congener, contributing an average of 75.5% to Σ₈PBDEs soil concentrations, followed by BDE-47, BDE-99 and BDE-183 at 7.90, 5.64 and 4.31%, respectively. Congener profiles reflected global estimates of Deca-BDE, Octa-BDE and Penta- BDE commercial production, with the most significant congener correlation existing between BDE-47 and BDE-99 (p < 0.001, r = 0.943). This first assessment of PBDEs in Melbourne soils indicates widespread contamination of the urban environment, including locations where direct sources to soil are not clear.