+Facile extraction of azide in sartan drugs using magnetized anion-exchange metal-organic frameworks prior to ion chromatography

High-Performance enrichment and sensitive analysis of bisphenol and its analogues in water and milk using a novel Ni-Based cationic Metal-Organic framework

A novel cationic metal-organic framework (iMOF-Ni) was designed and synthesized by a solvothermal method. It was fabricated as a solid-phase extraction (SPE) cartridge and exhibited high adsorption performance for Bisphenols (BPs). The theoretical simulation demonstrated that the adsorption mechanism between iMOF-Ni and BPs was attributed to cation-π bonding, π-π interaction, and electrostatic interactions. Under optimized SPE, a method for analyzing BPs was established by combining high-performance liquid chromatography-diode array detection (HPLC-DAD). The developed method has good linearity (R2 ≥ 0.994), low detection limits (0.07-0.16 ng/mL), and good reproducibility (1.72-6.35 %, n = 6). The applicability of the method was further evaluated by analyzing water and milk samples. Recoveries of four BPs in spiked samples were from 72.2 % to 96.6 %.

[Determination of seven phenoxy acid herbicides in water by dispersive solid phase extraction-ultra performance liquid chromatography-tandem mass spectrometry based on cationic metal-organic framework mixed matrix membrane]

离子型金属有机骨架材料(iMOFs)对离子型化合物具有良好的选择吸附性,利用水热法合成了一种金属有机骨架材料MIL-101-NH₂,以聚偏二氟乙烯(PVDF)为交联剂将其制备成混合基质膜(MMM),然后用三氟甲烷磺酸甲酯进行季胺基功能化改性,最终得到阳离子型金属有机骨架膜材料MIL-101-$NMe_{3}^{+}$-PVDF MMM,采用分散固相萃取方式富集水中的苯氧羧酸类除草剂,建立了一种基于阳离子型MOF混合基质膜的分散固相萃取-超高效液相色谱-串联质谱(UPLC-MS/MS)测定水体中7种苯氧羧酸类除草剂的分析方法。通过傅里叶变换红外光谱和扫描电子显微镜对制备的混合基质膜进行表征,结果表明季胺基功能化改性是成功的,得到了阳离子型MOF膜。对影响萃取效果的主要因素(吸附剂用量、水样pH值、萃取时间、洗脱剂种类、洗脱剂体积及洗脱时间)进行了优化,确定了最佳萃取条件。以0.01%(v/v)甲酸水溶液和乙腈作为流动相进行梯度洗脱,目标化合物在ACQUITY UPLC BEH C18色谱柱(100 mm×2.1 mm, 1.7 μm)上分离,在电喷雾电离源、负离子模式下进行多反应监测(MRM),外标法定量。结果表明,7种苯氧羧酸类除草剂在各自范围内线性关系良好,线性相关系数均大于0.997,方法的检出限(LOD)和定量限(LOQ)分别为0.00010~0.00090 μg/L和0.00033~0.00300 μg/L。在0.005、0.05和0.2 μg/L 3个加标水平下进行加标回收率试验,7种待测物的平均回收率为80%~102%,日内、日间相对标准偏差分别为1.4%~9.4%和4.2%~12.6%。该方法操作简单、快速,灵敏度高,适用于环境水体中7种苯氧羧酸类除草剂的检测。

A novel simple and precise method for the determination of azide impurity in sartans using headspace gas chromatography with two dissimilar capillary columns and two flame ionization detectors (HS-GC-FID/FID)

Determination of azide as an impurity in medicinal products was performed for the following sartans with tetrazole functional group (synthesized with the use of azide ion): candesartan, losartan, irbesartan, olmesartan medoxomil, and valsartan. This was achieved using headspace gas chromatography using a dual column/dual flame ionization detector (HS-GC-FID/FID). The method was linear in range, from 5.0-30.0 μg/g, with a coefficient of determination of >0.998 (R²). The limit of quantification was 5.0 μg/g and the detection limit was 1.9 μg/g. The sample preparation procedure is fast and simple. The validation procedure was performed in accordance with International Conference on Harmonization (ICH) and Pharmacopeia guidelines. Moreover, besides the content of azide ions, trace quantities of residual solvents (methanol, ethanol, acetone, isopropanol) were found in the majority of sartan tablets.

Cationic metal-organic framework based mixed-matrix membrane for extraction of phenoxy carboxylic acid (PCA) herbicides from water samples followed by UHPLC-MS/MS determination

A novel kind of cationic metal-organic framework(MOF) based mixed-matrix membrane(MMM) namely cationic MOF-MMM was firstly designed and used for simultaneous dispersive membrane extraction(DME) of six phenoxy carboxylic acid(PCA) herbicides from water samples followed by determination using ultrahigh-performance liquid chromatography tandem mass spectrometry. The cationic MOF-MMM was synthesized by soaking the zirconium-based MOFs in a polyvinylidene fluoride(PVDF) solution and further functionalization with quaternary amine groups, viz., UiO-66-NMe₃⁺ MMM. The well-prepared UiO-66-NMe₃⁺ MMM was characterized by FT-IR, SEM, XRD, XPS, NMR and etc. Several main variables influencing the MMM based DME efficiency were investigated and optimized in detail, such as dosage ratio of MOF/PVDF, solution pH, extraction time, coexistent anions and ionic strength. Electrostatic interactions dominated adsorption mechanism between anionic PCAs and cationic UiO-66-NMe₃⁺ MMM, along with ππ conjugation and cation-π bonding, leading to better adsorption performance. Low limits of detection in the range of 0.03-0.59 ng/L and satisfactory recoveries within 80.06-117.40 % for all the PCAs are a reliable witness to demonstrate supreme sensitivity and the applicability of the developed method. By relying on the obtained results, the present work implied cationic MOF-MMM based DME can be a versatile and worthy utility for extraction of pollutants from different water samples with high throughput.

Cationic metal-organic frameworks as an efficient adsorbent for the removal of 2,4-dichlorophenoxyacetic acid from aqueous solutions

Metal-organic frameworks (MOFs) material with high surface area, good chemical stability and multi-functionality, has become an emerging adsorbent for water treatment. A novel kind of quaternary amine anionic-exchange MOFs UiO-66 namely UiO-66-NMe₃⁺ was firstly synthesized for adsorptive removal of a widely used toxic herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous solutions. The well-prepared UiO-66-NMe₃⁺ MOFs were fully characterized, and then the main parameters affecting the adsorption process including solution pH, adsorbent dosage and coexisting anions were systematically investigated. The maximum adsorption capacity of UiO-66-NMe₃⁺ toward 2,4-D reached as high as 279 mg g^-1, much higher than that of pristine UiO-66 and aminated UiO-66. The adsorption mechanism could be attributed to the electrostatic interactions efficiently enhanced by the functionalization of quaternary amine groups, combining with the π-π conjugations between the linkers in MOFs and 2,4-D molecules, leading to the better adsorption performance of UiO-66-NMe₃⁺. Additionally, the UiO-66-NMe₃⁺ could be well regenerated by simple solvent washing and exhibited a slight decline of adsorption capacity after seven successive recycle. Furthermore, satisfactory adsorption capacity and reusability of the MOFs in environmental water samples were attained. Comparing with reported activated carbon and resin materials, the UiO-66-NMe₃⁺ MOFs possessed higher adsorption capacity and shorter equilibrium time, as well as good reusability and practicality. The developed ion-exchange functionalized MOFs provided an ideal alternative for efficient adsorptive-removal of 2,4-D from complicated aqueous environment.