Development of a split-flow system for high precision variable sample introduction in supercritical fluid chromatography

Advantages of online supercritical fluid extraction and chromatography hyphenated to mass spectrometry to analyse plastic additives in laboratory gloves

Plastic additives are introduced in plastic material formulations, along with organic polymers, to offer different properties such as stability, plasticity or color. However, plastic additives may migrate from the plastic material to the content (in case of plastic containers) or to the material in contact with the plastic, like human skin. In the case of plastic medical devices, this migration is of particular interest, as plastic additives may be deleterious to health. In the present paper, we examined the interest of combining supercritical fluid extraction (SFE) to supercritical fluid chromatography (SFC) hyphenated to mass spectrometry (MS) in an online system to characterize plastic additives in laboratory gloves, taken as samples of medical devices. A set of target compounds comprising 18 plasticizers, 4 antioxidants and 2 lubricants was defined and their detectability with MS was examined, where it appeared that electrospray ionization (ESI) provided better detectability than atmospheric pressure chemical ionization (APCI). After examining possible stationary phases with the help of Derringer desirability function, an isocratic chromatographic method (CO2:methanol 95:5) was developed on Shim-pack UC Phenyl column. The extraction method was examined with a 3-level full factorial design of experiments to optimize the extraction temperature (40 °C) and pressure (200 bar). The online SFE-SFC-MS method was compared to offline methods where the samples were extracted with liquid solvents at atmospheric pressure or high pressure then analysed with SFC-MS. In all cases, offline methods showed significant contaminants (like the oleamide lubricant) issuing from laboratory plastic materials as nitrogen drying station, syringes and filters, while the online method allowed a complete elimination of laboratory contaminations. Furthermore, the online method saved time, solvents and laboratory consumables. It will also show that transferring a compressible fluid from a loading loop is favourable to high efficiency, as the resulting chromatographic peaks are much thinner than when transferring a liquid. Compared to injecting liquid heptane, the efficiency increase was 3.4-fold, while compared to injecting liquid methanol (a common practice in SFC), the efficiency increase was 13-fold. Finally, the additive composition of different laboratory gloves was compared.

Thermally controlled microfluidic back pressure regulator

By using the temperature dependence of viscosity, we introduce a novel type of microfluidic lab-on-a-chip back pressure regulator (BPR) that can be integrated into a micro-total-analysis-system. A BPR is an important component used to gain pressure control and maintain elevated pressures in e.g. chemical extractions, synthesis, and analyses. Such applications have been limited in microfluidics, since the back pressure regularly has been attained by passive restrictors or external large-scale BPRs. Herein, an active microfluidic BPR is presented, consisting of a glass chip with integrated thin-film heaters and thermal sensors. It has no moving parts but a fluid restrictor where the flow resistance is controlled by the change of viscosity with temperature. Performance was evaluated by regulating the upstream pressure of methanol or water using a PID controller. The developed BPR has the smallest reported dead volume of 3 nL and the thermal actuation has time constants of a few seconds. The pressure regulation were reproducible with a precision in the millibar range, limited by the pressure sensor. The time constant of the pressure changes was evaluated and its dependence of the total upstream volume and the compressibility of the liquids is introduced.

Supercritical fluid extraction-supercritical fluid chromatography of saliva: Single-quadrupole mass spectrometry monitoring of caffeine for gastric emptying studies†

Saliva is an attractive sampling matrix for measuring various endogenous and exogeneous substances but requires sample treatment prior to chromatographic analysis. Exploiting supercritical CO₂ for both extraction and chromatography simplifies sample preparation, reduces organic solvent consumption, and minimizes exposure to potentially infectious samples, but has not yet been applied to oral fluid. Here, we demonstrate the feasibility and benefits of online supercritical fluid extraction coupled to supercritical fluid chromatography and single-quadrupole mass spectrometry for monitoring the model salivary tracer caffeine. A comparison of ¹³ C- and ³² S-labeled internal standards with external standard calibration confirmed the superiority of stable isotope-labeled caffeine over nonanalogous internal standards. As proof of concept, the validated method was applied to saliva from a magnetic resonance imaging study of gastric emptying. After administration of 35 mg caffeine via ice capsule, salivary levels correlated with magnetic resonance imaging data, corroborating caffeine's usefulness as tracer of gastric emptying (R²  = 0.945). In contrast to off-line methods, online quantification required only minute amounts of organic solvents and a single manual operation prior to online bioanalysis of saliva, thus demonstrating the usefulness of CO₂ -based extraction and separation techniques for potentially infective biomatrices.

Supercritical fluid chromatography - Mass spectrometry in metabolomics: Past, present, and future perspectives

Metabolomics, which consists of the comprehensive analysis of metabolites within a biological system, has been playing a growing role in the implementation of personalized medicine in modern healthcare. A wide range of analytical approaches are used in metabolomics, notably mass spectrometry (MS) combined to liquid chromatography (LC), gas chromatography (GC), or capillary electrophoresis (CE). However, none of these methods enable a comprehensive analysis of the metabolome, due to its extreme complexity and the large differences in physico-chemical properties between metabolite classes. In this context, supercritical fluid chromatography (SFC) represents a promising alternative approach to improve the metabolome coverage, while further increasing the analysis throughput. SFC, which uses supercritical CO₂ as mobile phase, leads to numerous advantages such as improved kinetic performance and lower environmental impact. This chromatographic technique has gained a significant interest since the introduction of advanced instrumentation, together with the introduction of dedicated interfaces for hyphenating SFC to MS. Moreover, new developments in SFC column chemistry (including sub-2 µm particles), as well as the use of large amounts of organic modifiers and additives in the CO₂-based mobile phase, significantly extended the application range of SFC, enabling the simultaneous analysis of a large diversity of metabolites. Over the last years, several applications have been reported in metabolomics using SFC-MS - from lipophilic compounds, such as steroids and other lipids, to highly polar compounds, such as carbohydrates, amino acids, or nucleosides. With all these advantages, SFC-MS is promised to a bright future in the field of metabolomics.

Supercritical Fluid Extraction of Pesticides and Insecticides from Food Samples and Plant Materials

The principal intention of this study is presenting the attempts carried out for extracting, separating, and determining of the pesticide and insecticide residues existing in food and plant samples. In this regard, a set of content, including the explanations about the supercritical fluid extraction (SFE), supercritical fluid chromatography, and various types of pesticides are indicated. Besides, the parameters affecting the pesticides extraction composed of temperature, pressure, modifier, drying agent, and so on are discussed. Also, examples of insecticides extraction by SFE technique as an important subset of pesticides are indicated. Along with these items, some interesting works, concerning the innovations implemented in the field of SFE of pesticide and insecticide residues from foodstuff and plants are depicted.

Evaluation of supercritical fluid extraction for the determination of neonicotinoid pesticides in green onion

A supercritical fluid extraction (SFE) method was presented for the determination of neonicotinoid pesticides in green onion. We optimized the SFE parameters, namely the pressure, temperature, type and concentration of the modifier solvent, and extraction time, by testing on the incurred green onion applied with four commercial neonicotinoid formulations at the harvesting stage. The analytical values of the four neonicotinoids, obtained by 5 min dynamic SFE with a 25% (v/v) methanol/supercritical carbon dioxide mixture at 80 °C and 25 MPa, were in good agreement with those obtained by solid-liquid extraction using a homogenizer. This latter homogenization method is employed as a Japanese official method for the analysis of pesticide residues in food. The SFE-to-homogenization analytical value ratios were in the range 98.8-100.0%. Spike-and-recovery testing with spiked green onion was also performed by optimized SFE. The ratios of the analytical-to-spiked concentrations for six neonicotinoids obtained by the SFE method were 96.1-102.1% for 0.4 mg/kg and 93.9-104.1% for 4.0 mg/kg spiking levels. These values satisfied the Japanese validation guidelines for the testing method of pesticides in food. These results indicate that SFE is applicable for the analysis of neonicotinoids in green onion and enables automatic extraction with a small amount of solvent.

Development of a practical online supercritical fluid extraction-supercritical fluid chromatography/mass spectrometry system with an integrated split-flow method

Herein, we describe a practical online supercritical fluid extraction-supercritical fluid chromatography/mass spectrometry (SFE-SFC/MS) system with an integrated split-flow method and a pre-column trap method that is well suited for the continuous extraction and separation of a wide range of compounds, including hydrophilic ones. Although an SFE-SFC system with a splitting method is already commercially available, in this study, we added some new features to this system: 1) a splitting method that further reduces the amount of extractant introduced into SFC, 2) a trap column, connected before the analytical column, with a different separation mechanism than the analytical column in the system with the splitting method, and 3) a system for calculating the recovery rate of SFE during online SFE-SFC/MS. In the above setup, part of the analyzed extract is introduced into the separation section at a higher split ratio owing to the make-up pump flow rate, thus reducing the distortion of the target analyte peak shape caused by the use of a strong extractant. Furthermore, the separation efficiency is improved by the use of an additional pre-column capable of interacting with compounds weakly retained on the analytical column. Finally, we show that equalization of the SFE and autosampler injection conditions allows evaluation of the recovery rate of SFE during online SFE-SFC/MS.