Application of an immobilized ionic liquid for the passive sampling of perfluorinated substances in water

Development of ionic-liquid-impregnated activated carbon for sorptive removal of PFAS in drinking water treatment

Adsorption of per- and poly-fluoroalkyl substances (PFAS) on activated carbon (AC) is considerably hindered by the surface water constituents, degrading the ability of the AC adsorption process to remove PFAS in drinking water treatment. Herein, we developed ionic-liquid-impregnated AC (IL/AC) as an alternative to AC for PFAS sorption and demonstrated its performance with real surface water for the first time. Ionic liquids (ILs) of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (IL(C2)) and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (IL(C6)) were selected from among 272 different ILs using the conductor-like screening model for realistic solvents (COSMO-RS) simulation. Impregnation of the ILs in AC was verified using various analytical techniques. Although the synthesized IL/ACs were less effective than pristine AC in treating PFAS in deionized water, their performances were less impacted by the surface water constituents, resulting in comparable or sometimes better performances than pristine AC for treating PFAS in surface water. The removal efficiencies of 10 wt% IL(C6)/AC for six PFAS were 1.40-1.96 times higher than those of pristine AC in a surface water sample containing 2.6 mg/L dissolved organic carbon and millimolar-level divalent cation concentration. PFAS partitioning from the surface water to ILs was not hindered by dissolved organic matter and was enhanced by the divalent cations, indicating the advantages of IL/ACs for treating significant amounts of PFAS in water. The synthesized IL/ACs were effective at treating coexisting pharmaceutical and personal-care products in surface water, showcasing their versatility for treating a broad range of water micropollutants.

Progress in the application of ionic liquids and deep eutectic solvents for the separation and quantification of per- and polyfluoroalkyl substances

Per- and polyfluoroalkyl substances (PFASs), often labeled as "forever chemicals," earned this moniker due to their widespread presence in the environment, bioaccumulative tendencies, and resistance to remediation efforts. Employed for decades in various applications, spanning from stain-resistant fabrics to grease-proof food containers and fire-fighting foams, PFASs have evolved into an anthropogenic nightmare. Their adverse impact on human health, including immune dysfunction, infertility, and a spectrum of cancers, is alarming. Conventional water treatment methods, notably in the case of short-chain congeners, struggle to effectively eliminate PFASs, underscoring the pressing need for enhanced adsorbents. In recent years, there has been a prominent surge in the exploration of innovative techniques centered around ionic liquids (ILs) and deep eutectic solvents (DESs) for the removal of PFASs from various sources, including food samples like cooking oil, as well as environmental waters. In this Review, we delve into key advancements and discoveries related to the utilization of ILs and DESs as media for the liquid-liquid extraction of PFASs, as well as their applications as sorbents on solid-state or nanoscale supports. Our exploration encompasses groundbreaking approaches, including the utilization of dicationic ILs for ultra-sensitive mass spectrometric PFAS detection, alongside the innovative application of fluorinated ILs and hydrophobic DESs, enabling highly efficient PFAS sequestration. The landscape of existing PFAS extraction methods is riddled with formidable challenges, including limited selectivity, matrix interferences, subpar extraction efficiency, exorbitant costs, laborious procedures, ecological consequences, and a lack of standardization. Given these challenges, our review unequivocally asserts the pivotal role ILs and DESs will play in shaping the next generation of PFAS remediation strategies. Rigorous characterization of water solubility, toxicity, and biodegradation, along with improved recyclability and thorough techno-economic analyses, are essential for further progress. Future focus must also extend to addressing short-chain PFASs (such as PFBS) and PFAS alternatives (including ADONA, GenX, F-53B), which often pose higher toxicity risks than the compounds they aim to replace. A forward-thinking approach will integrate cutting-edge data-driven techniques, such as machine learning, to enhance our understanding and response to PFAS-related issues. Finally, we advocate seamless integration of PFAS separation with advanced treatment, efficiently isolating and destroying these compounds for a lasting solution to contamination challenges.

A Review of In Situ Methods-Solid Phase Adsorption Toxin Tracking (SPATT) and Polar Organic Chemical Integrative Sampler (POCIS) for the Collection and Concentration of Marine Biotoxins and Pharmaceuticals in Environmental Waters

Solid Phase Adsorption Toxin Tracking (SPATT) and Polar Organic Chemical Integrative Sampler (POCIS) are in situ methods that have been applied to pre-concentrate a range of marine toxins, pesticides and pharmaceutical compounds that occur at low levels in marine and environmental waters. Recent research has identified the widespread distribution of biotoxins and pharmaceuticals in environmental waters (marine, brackish and freshwater) highlighting the need for the development of effective techniques to generate accurate quantitative water system profiles. In this manuscript, we reviewed in situ methods known as Solid Phase Adsorption Toxin Tracking (SPATT) and Polar Organic Chemical Integrative Sampler (POCIS) for the collection and concentration of marine biotoxins, freshwater cyanotoxins and pharmaceuticals in environmental waters since the 1980s to present. Twelve different adsorption substrates in SPATT and 18 different sorbents in POCIS were reviewed for their ability to absorb a range of lipophilic and hydrophilic marine biotoxins, pharmaceuticals, pesticides, antibiotics and microcystins in marine water, freshwater and wastewater. This review suggests the gaps in reported studies, outlines future research possibilities and guides researchers who wish to work on water contaminates using Solid Phase Adsorption Toxin Tracking (SPATT) and Polar Organic Chemical Integrative Sampler (POCIS) technologies.

Carbon nanotube-passive samplers as novel tools for sampling and determining micropollutants in the aquatic environment

Passive sampling is an interesting and cost-effective strategy for the quantification of micropollutants in the aquatic environment. When combined especially with a sensitive analytical method such as liquid chromatography coupled with triple quadrupole mass spectrometry (LC-MS/MS), the use of passive sampling devices (PSDs) enables long-term and reliable determination of a wide range of chemicals. In this study, carbon nanotubes (CNTs) were used as an innovative sorbent in POCIS-like samplers (Polar Organic Chemical Integrative Sampler). The developed CNTs-PSDs were calibrated by the flow-through method and the obtained sampling rates (R_s) of analytes were compared with the previously obtained R_s values using the semi-static method. Subsequently, passive samplers were placed in the Baltic Sea, the Nogat River, and the Sztumskie Pole Lake in order to sample and concentrate 28 chemical compounds belonging to the group of contaminants of emerging concern (CECs). For the first time, the effectiveness of the use of CNTs-PSDs in the field was proven by the quantification of carbamazepine, diclofenac, p-nitrophenol, bisphenol A, 3,5-dichlorophenol, 17-β-estradiol, 17-α-ethinylestradiol and metoprolol in the tested surface waters. The obtained time-weighted average (TWA) concentrations of analytes ranged from 0.22 ± 0.12 ng/L (for metoprolol in the Nogat River) to 32.1 ± 2.4 ng/L (for bisphenol A in the Sztumskie Pole Lake). More importantly, CNTs-PSDs determined a greater amount of micropollutants than grab sampling and solid-phase extraction (SPE), which proves the advantage of passive sampling over grab sampling, especially when monitoring contaminants in the aquatic environment at low concentration levels.

Iron-Doped Bimodal Mesoporous Silica Nanomaterials as Sorbents for Solid-Phase Extraction of Perfluoroalkyl Substances in Environmental Water Samples

In this work, sorbets based on UVM-7 mesoporous silica doped with Fe were synthesized and applied to solid-phase extraction of perfluoroalkyl substances from environmental water samples. These emerging pollutants were then determined by liquid chromatography coupled with a mass spectrometry detector. Thus, Fe-UVM-7 mesoporous silica materials with different contents of iron, as well as different pore sizes (by using alkyltrimethilamonium bromide surfactants with different organic tail lengths) were synthesized, and their structure was confirmed for the first time by transmission electron microscopy, nitrogen adsorption–desorption, X-ray diffraction, and Raman spectroscopy. After comparison, Fe50-UVM-7-C₁₂ was selected as the best material for analyte retention, and several extraction parameters were optimized regarding the loading and elution step. Once the method was developed and applied to real matrices, extraction efficiencies in the range of 61–110% were obtained for analytes with C₈–C₁₄ chain length, both perfluoroalkyl carboxylates, and perfluoroalkyl sulfonates. Likewise, limits of detection in the range of 3.0–8.1 ng L⁻¹ were obtained for all target analytes. In the analysis of real well-water samples, no target compounds were detected. Spiked samples were analyzed in comparison to Oasis WAX cartridges, and statistically comparable results were achieved.

Superficially capped amino metal-organic framework for efficient solid-phase microextraction of perfluorinated alkyl substances

Perfluorinated alkyl substances (PFASs) were ubiquitously in the surface and groundwater. It is crucial and urgent to develop a rapid and ultrasensitive analysis method for the quantification of trace-level PFASs. Herein, a highly hydrophobic sorbent by capping phenylsilane groups on the surfaces of NH₂-UiO-66(Zr) nanocrystals was used for efficient solid-phase microextraction (SPME) of PFASs in water samples. It was found that the superficially capped nanocrystals (NH₂-UiO-66(Zr)-hp) exhibited both faster extraction kinetics and higher enrichment capacity than the non-capped nanocrystals. The extraction of eleven kinds of PFASs by NH₂-UiO-66(Zr)-hp fiber reached equilibrium in 20 min. The enrichment factors of the NH₂-UiO-66(Zr)-hp fiber ranged from 6.5 to 48, with a preference for long-chain PFASs over short-chain PFASs. It was proposed that superficial capping eliminated competitive moisture adsorption on the surfaces of the non-capped nanocrystals, thus facilitating the adsorption of PFASs through hydrophobic interaction. By using this new sorbent, the limits of detection of the SPME method as low as 0.035 to 0.616 ng·L^-1 were achieved for the target PFASs. The recoveries of PFASs in the environmental water samples were 80.9%-120%. This study presents a new strategy for developing an efficient sorbent for PFASs by surface hydrophobic modification.

A graphene-based hydrogel monolith with tailored surface chemistry for PFAS passive sampling

Aquatic contamination by per- and polyfluorinated alkyl substances (PFAS) has attracted global attention due to their environmental and health concerns. Current health advisories and surface water regulatory limits require PFAS detection in the parts per trillion (ppt) range. One way to achieve those low detection limits is to use a reliable passive sampling-based monitoring tool for PFAS, as exists for numerous nonpolar persistent organic pollutants. Here we introduce a new graphene-based hydrogel monolith and describe its synthesis, chemical functionalization, property characterization, and testing as a PFAS equilibrium passive sampler. The graphene monoliths were self-assembled by hydrothermal treatment from graphene oxide (GO) aqueous dispersions to produce free standing cylinders of ~563 mm³ volume consisting of ~4 wt-% thin-walled porous graphene and ~96 wt-% water. The uptake of 23 PFAS was measured on the as-produced monoliths, and equilibrium partition coefficients (K_SW), were derived for longer chain (C≥8) perfluoroalkyl acids (PFAA) and neutral precursors such as sulfonamides (log K_SW range 1.9 - 3.6). To increase the K_SW for shorter chain PFAA, the monoliths were chemically modified by a new diazonium-based grafting reaction that introduces positive surface charge without damage to the graphenic backbone. Introduction of benzylamine moieties through the diazonium intermediate switches zeta potential at pH 7 from -45mV (as-produced graphene) to + 5mV. This modification increased the sorption of short and middle chain PFAA by ten-fold (e.g. log K_SW for PFBA increased from 1.3 to 2.2), thereby improving the functionality of the passive sampler device for a wider range of PFAS. Field deployments demonstrated that the graphene monoliths were capable of detecting key PFAS in the Delaware River.

Development and Applications of Novel DGT Passive Samplers for Measuring 12 Per- and Polyfluoroalkyl Substances in Natural Waters and Wastewaters

Extensive and long-term use of per- and polyfluoroalkyl substances (PFASs) has caused their widespread distribution in aquatic systems. A new diffusive gradients in thin-films (DGT) passive sampling method based on weak anion exchanger (WAX) binding layer is developed here for monitoring five perfluoroalkyl carboxylic acids (PFCAs), five perfluoroalkanesulfonic acids (PFSAs) and two PFASs (6:2 FTSA and GenX) in waters. Performance of WAX-DGTs was independent of environmental conditions, namely pH (3.03-8.96), ionic strength (1-500 mM), and DOM content (4-30 mg L^-1). Diffusion coefficients (D) of the 12 PFASs in the diffusive gels were measured, 9 for the first time. Linear correlations between D and perfluoroalkyl chain lengths (CF₂) were established to obtain D for congener chemicals with the similar functional group and structure. The binding capacity of the WAX-DGT sampler was at least 440 μg PFASs per sampler, sufficient for applications in waters across a wide range of conditions and PFASs concentrations. Successful applications of WAX based DGT samplers in a wastewater treatment plant (WWTP) and three rivers has demonstrated that DGT is a powerful tool for monitoring, surveillance and research of these 12 PFASs in aquatic systems, and can be extended to wider suites of PFs in future.

A facile process for the preparation of organic gel-assisted silica microsphere material for multi-mode liquid chromatography

Organic gel (OG) has excellent characteristics, including a large surface area, adjustable pore/channel size, and good chemical stability, and has attracted great attention in the field of materials. However, the OG packed column is difficult to pack due to the weak mechanical strength and poor monodispersity. Herein, 1-allyl-3-methyl imidazolium hexafluorophosphate-co-1-dodecanethiol ([AMIm]PF₆-co-TDDM) was prepared on the silica microsphere for chromatographic packing available in multimode liquid chromatography (LC) mode with the good mechanical properties of silica microspheres through a simple OG synthesis method. [AMIm]PF₆-co-TDDM@SiO₂ hybrid microspheres with uniform particles and narrow particle size distribution are used as stationary phases of LC. These microspheres are used in anion-exchange (IEC), reversed-phase (RP), and hydrophilic interaction (HILIC) mode for the separation of different analytes. Such microspheres can also be used for the preliminary qualitative analysis of active ingredients in actual samples in addition to organic acids, alkylbenzenes, and nucleoside bases. The [AMIm]PF₆-co-TDDM@SiO₂ chromatography packing also has good reproducibility and stability. The adhesive properties of organogels and the adsorption properties of silica gel simplify the synthesis of stationary phase materials. This simple and effective strategy for preparing [AMIm]PF₆-co-TDDM@SiO₂ composite microspheres by one-pot method can expand the application of OG as a functional additive on silica microspheres in LC.

Sampling Rate of Polar Organic Chemical Integrative Sampler (POCIS): Influence Factors and Calibration Methods

As a passive sampling device, the polar organic chemical integrative sampler (POCIS) has the characteristics of simple operation, safety, and reliability for assessing the occurrence and risk of persistent and emerging trace organic pollutants. The POCIS, allowing for the determination of time-weighted average (TWA) concentration of polar organic chemicals, exhibits good application prospects in aquatic environments. Before deploying the device in water, the sampling rate (Rs), which is a key parameter for characterizing pollutant enrichment, should be determined and calibrated accurately. However, the Rs values strongly depend on experimental hydrodynamic conditions. This paper provides an overview of the current situation of the POCIS for environmental monitoring of organic pollutants in an aquatic system. The principle and theory of the POCIS are outlined. In particular, the effect factors such as the ambient conditions, pollutant properties, and device features on the Rs are analyzed in detail from aspects of impact dependence and mechanisms. The calibration methods of the Rs under laboratory and in situ conditions are summarized. This review offers supplementary information on comprehensive understanding of mechanism and application of the POCIS. Nevertheless, the Rs were impacted by a combined effect of solute–sorbent–membrane–solution, and the influence extent of each variable was still unclear. On this basis, the ongoing challenges are proposed for the future application of the POCIS in the actual environment, for instance, the need for this device to be improved in terms of quantitative methods for more accurate measurement of the Rs.

Measuring the occurrence of antibiotics in surface water adjacent to cattle grazing areas using passive samplers

A wide variety of antibiotics and other pharmaceuticals are used in livestock production systems and residues passed to the environment, often unmetabolized, after use and excretion. Antibiotic residues may be transported from manure-treated soils via runoff and are also capable of reaching surface and groundwater systems through a variety of pathways. The occurrence and persistence of antibiotics in the environment is a concern due to the potential for ecological effects and proliferation of environmental antibiotic resistance in pathogenic organisms. In the present study, the occurrence and seasonal variation of 24 commonly-used veterinary antibiotics was evaluated in surface water adjacent to several livestock production systems using Polar Organic Chemical Integrative Samplers (POCIS). Uptake rates for all compounds, nine of which have not been previously reported, were measured in the laboratory to permit estimation of changes in the time-weighted average (TWA) antibiotic concentrations during exposure. The antibiotics detected in POCIS extracts included sulfadimethoxine, sulfamethoxazole, trimethoprim, sulfamerazine, sulfadiazine, lincomycin, erythromycin, erythromycin anhydro- and monensin. The maximum TWA concentration belonged to sulfadiazine (25 ng/L) in the August-September sampling period and coincided with the highest number of precipitation events. With the exception of monensin that showed an increase in concentration over the stream path, none of the detected antibiotics were prescribed to livestock at the facility. The detection of antibiotics not prescribed by the facility may be attributable to the environmental persistence of previously used antibiotics, transfer by wind from other nearby livestock production sites or industrial uses, and/or the natural production of some antibiotics.

Calibration and application of passive sampling for per- and polyfluoroalkyl substances in a drinking water treatment plant

The aim of this study was to calibrate and apply polar organic chemical integrative samplers (POCIS) to examine 26 per- and polyfluoroalkyl substances (PFASs) in a drinking water treatment plant (DWTP). As a first step, the sampling rates (R_s) of 14 PFASs were determined in a laboratory calibration study for POCIS-WAX (weak-anion exchange) and POCIS-HLB (hydrophilic-lipophilic balance) (each with a surface area per mass of sorbent ratio of 227 cm² g^-1). While most PFASs were still in the linear uptake phase during the 28-day calibration study, R_s ranged from 0.003 to 0.10 L d^-1 for POCIS-WAX and 0.00052 to 0.13 for POCIS-HLB. It is important to note that POCIS-WAX had higher R_s for short-chain perfluoroalkyl carboxylates (PFCAs) with a perfluorocarbon chain length of C₃-C₆ and perfluorobutane sulfonate (PFBS) compared with POCIS-HLB. Furthermore, R_s was significantly positively correlated with the sorbent-water partition coefficient (K_pw) for POCIS-WAX and POCIS-HLB (p < 0.0001). Use of POCIS-WAX and POCIS-HLB in the DWTP showed good agreement with composite water sampling. No removal of PFASs was observed in the full-scale DWTP. Overall, this is the first study of PFAS monitoring in a DWTP using two types of POCIS. The results demonstrate high suitability for future applications.

New passive sampling device for effective monitoring of pesticides in water

The extensive use of pesticides promotes environmental contamination, mainly in surface and ground waters. However, they remain at very low concentration and present wide degradation level requiring the use of efficient devices for pesticides passive sampling. In this study, a new in situ passive sampling device was developed for monitoring and estimating time-weighted average (TWA) of pesticides in waters. The device was made with simple, recyclable and cheap materials. The sampling system involves the liquid phase microextraction technique with hollow fiber in two-phases mode. Pesticides determination was done by gas chromatography coupled to mass spectrometry. The method was optimized and validated for the determination of 29 pesticides in water, showing good linearity in the range between 0.012 and 40.00 μg L^-1 with determination coefficients of R² > 0,9649. Limit of detection (LOD) ranged from 0.009 to 0.557 μg L^-1 and limit of quantification (LOQ) from 0.012 to 0.802 μg L^-1. The recoveries of spiked pesticides in water samples were in the range from 96 to 130%. The method was applied to forty environmental water samples collected at São Francisco river basin, Brazil. The highest detection frequency was found for the pesticides 4,4-DDE, 4,4-DDD and propazine. They were detected in more than 20 percent of the samples.

The application of molecularly imprinted polymers in passive sampling for selective sampling perfluorooctanesulfonic acid and perfluorooctanoic acid in water environment

Modeling and predicting of a novel polar organic chemical integrative sampler (POCIS) for sampling of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) using molecularly imprinted polymers (MIPs) as receiving phase are presented in this study. Laboratory microcosm experiments were conducted to investigate the uptake kinetics, effects of flow velocity, pH, and dissolved organic matter (DOM), and also the selectivity of the POCIS. In this study, uptake study of PFOA and PFOS sampling on MIP-POCIS, over 14 days, was investigated. Laboratory calibrations of MIP-POCIS yielded sampling rate (R_s) values for PFOA and PFOS were 0.387 and 0.229 L/d, higher than POCIS using commercial sorbent WAX as receiving phase (0.133 and 0.141 L/d for PFOA and PFOS, respectively) in quiescent condition. The R_s values for PFOA and PFOS sampling on MIP-POCIS were increased to 0.591 and 0.281 L/d in stirred condition (0.01 m/s), and no significant increase occurred when the flow velocity was further increased. The R_s values were kept relatively high in the solution of which the pH was lower than the isoelectric point (IEP) of MIP-sorbent and decreased when the solution pH was extend the IEP value. Under the experimental conditions, DOM seemed to slightly facilitate the R_s values of PFOA and PFOS in MIP-POCIS. The results showed that the interaction between the target compounds and the receiving phase was fully integrated by the imprinting effects and also the electrostatic interaction. Finally, comparing the sampling rate of WAX-POCIS and the MIP-POCIS, the MIP-POCIS offers promising perspectives for selective sampling ability for PFOA and PFOS.