A single–step synthesized supehydrophobic melamine formaldehyde foam for trace determination of volatile organic pollutants

Needle trap device technique: From fabrication to sampling

Needle Trap Device (NTD) as a novel, versatile, and eco-friendly technique has played an important role in analytical and environmental chemistry. The distinctive role of this interdisciplinary technique can be defended through the sampling and analysis of biological samples and industrial pollutants in gaseous and liquid environments. In recent years, significant efforts have been made to enhance the performance of the needle trap device resulting in the development of novel extraction routes by various packing materials with improved selectivity and enhanced adsorption characteristics. These achievements can lead to the facilitated pre-concentration of desired analytes. This review tries to have a comparative and comprehensive survey of the three important areas of NTD technique: I) Fabrication and preparation procedures of NTDs; II) Sampling techniques of pollutants using NTDs; and III) Employed materials as adsorbents in NTDs. In the packing-material section, the commercial and synthetic adsorbents such as carbon materials, metal-organic frameworks, aerogel, and polymers are considered. Furthermore, the limitations and potential areas for future development of the NTD technique are presented.

Aquatic toxicity of waterpipe wastewater chemicals

INTRODUCTION

The recent increase in U.S. popularity and use prevalence of water pipe (WP) tobacco smoking raises concerns about the potential environmental impacts of WP waste disposal and the need for strategies to reduce such impacts. The U.S. Food and Drug Administration (FDA) is required to assess the environmental impacts of its tobacco regulatory actions per the U.S. National Environmental Policy Act (NEPA). The purpose of this study was to identify and quantify specific chemical constituents in WP wastewater and to determine their potential aquatic toxicity.

METHODS

Using a modified Beirut smoking regimen, five different WP charcoal brands (n = 70) and ten WP tobacco brands (n = 35) were smoked separately using a WP smoking machine in which smoke was passed through the WP base water. We analyzed and quantified specific chemical constituents in the WP bowl wastewater through standardized U.S. Environmental Protection Agency's (EPA) Hazardous Waste Test Methods. We then characterized the ecological hazard for acute and chronic aquatic toxicity posed by the specific chemicals through compilations of Globally Harmonized System of Classification and Labelling of Chemicals (GHS) and hazardous concentration values (concentration affecting 50% of the species).

RESULTS

Among the list of 31 specific chemicals analyzed, we detected 22 and 11 chemicals in wastewater from WP tobacco and WP charcoal smoking, respectively. Nearly half of the 22 WP wastewater chemicals were classified as "very toxic" or "toxic" for acute and chronic aquatic toxicity per GHS classification. The most hazardous compounds with acute and chronic toxicity in aquatic organisms include acrolein, acrylonitrile, and metals (cadmium, lead, chromium, nickel, cobalt) found in both WP tobacco and charcoal wastewater, and N-nitrosonornicotine, nicotine, crotonaldehyde and selenium were additionally found in WP tobacco wastewater. All the identified chemicals are considered harmful or potentially harmful constituents in tobacco products and tobacco smoke per FDA's list, and seventeen of them represent hazardous waste per EPA's list.

CONCLUSION

Our study expands the identification and quantifies several WP wastewater chemical constituents. It characterizes the ecological hazard of these chemicals and identifies chemicals of concern, aiding our evaluation of the environmental impacts of WP waste products. Our results add to the existing evidence that WP wastewater is a source of toxins that could affect water quality and aquatic organisms, and bioaccumulate in the environment if disposed of into public sewers, on the ground, or in an onsite septic system. These findings highlight the importance of concerted efforts to raise awareness of appropriate WP waste disposal practices in both retail and residential settings, and applicable regulatory compliance requirements for WP retailer establishments, thereby limiting hazards from WP wastewater.

Sponges and Sponge-Like Materials in Sample Preparation: A Journey from Past to Present and into the Future

Even though instrumental advancements are constantly being made in analytical chemistry, sample preparation is still considered the bottleneck of analytical methods. To this end, researchers are developing new sorbent materials to improve and replace existing ones, with the ultimate goal to improve current methods and make them more efficient and effective. A few years ago, an alternative trend was started toward sample preparation: the use of sponge or sponge-like materials. These materials possess favorable characteristics, such as negligible weight, open-hole structure, high surface area, and variable surface chemistry. Although their use seemed promising, this trend soon reversed, due to either the increasing use of nanomaterials in sample preparation or the limited scope of the first materials. Currently, with the development of new materials, such as melamine sponges, along with the advancement in nanotechnology, this topic was revived, and various functionalizations were carried out on such materials. The new materials are used as sorbents in sample preparation in analytical chemistry. This review explores the development of such materials, from the past to the present and into the future, as well as their use in analytical chemistry.

Waterpipe device cleaning practices and disposal of waste associated with waterpipe tobacco smoking in homes in the USA

OBJECTIVES

To quantify postsmoking waterpipe tobacco (WPT) waste and describe postsmoking waterpipe (WP) device cleaning practices and disposal of associated waste in home settings.

METHODS

We analysed data from a US convenience sample of 50 exclusive WPT smokers, mean age 25.3 years. Data were collected at a home visit during which participants smoked one WPT head and completed a self-administered questionnaire on WP cleaning practices and disposal of waste associated with WPT use. Research assistants provided and prepared a WP for participants by weighing and loading 10 g of WPT in the WP head and placing 470 mL of water in the WP bowl. At the completion of the smoking session, research assistants measured the remaining WPT and water. Descriptive analyses were performed.

RESULTS

Of the 10 g of fresh WPT used for each smoking session, 70.1% (mean=7.01 g) was discarded postsmoking as waste; for each 470 mL of water used in the WP bowl, 94.3% (mean=443 mL) was discarded. WP device cleaning practices ranged from never cleaning the device to cleaning it after each smoking session. Respondents reported discarding smoked WPT residue in the trash (81.6%) or the kitchen sink (14.3%) and discarding postsmoking charcoal in the trash (57.6%), the kitchen sink (27.3%) or backyard soil (9.1%). Respondents reported discarding smoked WP water in the kitchen sink (76.5%), bathroom sink (14.7%), toilet (2.9%) and backyard soil (5.9%).

CONCLUSIONS

Interventions and regulations are needed to inform proper WP device cleaning practices and disposal of waste associated with WPT use.

TRIAL REGISTRATION NUMBER

NCT03253653.

Implementing a superhydrophobic substrate in immersed solvent-supported microextraction as a novel strategy for determination of organic pollutants in water samples

In this research, a new approach for extraction and determination of polycyclic aromatic hydrocarbons from sea and rain water samples was developed by implementing a superhydrophobic substrate and consuming the least amount of solvent. This version of solvent-supported microextraction enabled us to perform the procedure in the immersion mode with the slightest troubles arising from water leakage into the gas chromatography. The superhydrophobic property leads to the fixation of extracting solvent on the substrate surface during water sampling. To prepare a superhydrophobic substrate, a piece of melamine foam was coated by tannic acid and silica nanoparticles using methyltrimethoxysilane and tetramethyl orthosilicate. The morphology of the prepared foams was studied by scanning electron microscopy. The developed solvent-supported microextraction method in combination with gas chromatography-mass spectrometry was applied to the isolation and determination of some typical polycyclic aromatic hydrocarbons from aquatic media. Influential parameters such as substrate nature, extractive solvent, eluting solvent and its quantity and extraction time were investigated. The limits of detection and quantification of the method under the optimized conditions were 0.01-0.11 µg L^-1 and 0.03-1.01 µg L^-1, respectively. The relative standard deviations at the concentration level of 20 µg L^-1 were between 3% and 14% (n = 3). The linearity of calibration curves ranged from 0.03 to 60 µg L^-1. The implementation of the solvent-supported method to the analysis of real water samples was quite successful and the relative recoveries were between 88% and 107%.