Screening for mineral oil saturated and aromatic hydrocarbons in paper and cardboard directly by planar solid phase extraction and by its coupling to gas chromatography

Sample preparation for planar chromatography

High-performance thin-layer chromatography has favorable properties for high-throughput separations with a high matrix tolerance. Sample preparation, however, is sometimes required to control specific matrix interferences and to enhance the detectability of target compounds. Trends in contemporary applications have shifted from absorbance and fluorescence detection to methods employing bioassays and mass spectrometry. Traditional methods (shake-flask, heat at reflux, Soxhlet, and hydrodistillation) are being challenged by automated instrumental approaches (ultrasound-assisted and microwave-assisted solvent extraction, pressurized liquid extraction, and supercritical fluid extraction) and the quick, easy cheap, efficient, rugged, and safe extraction method for faster and streamlined sample processing. Liquid-liquid extraction remains the most widely used approach for sample clean-up with increasing competition from solid-phase extraction. On-layer sample, clean-up by planar solid-phase extraction is increasingly used for complex samples and in combination with heart-cut multimodal systems. The automated spray-on sample applicator, the elution head interface, biological detection of target and non-target compounds, and straightforward mass spectrometric detection are highlighted as the main factors directing current interest toward faster and simpler sample workflows, analysis of more complex samples, and the determination of minor contaminants requiring high concentration factors.

Screening for mineral oil hydrocarbons in vegetable oils by silver ion-planar solid phase extraction

The analysis of mineral oil hydrocarbons in vegetable oils is challenging especially regarding the analysis of mineral oil aromatic hydrocarbons (MOAH) since native terpenes like squalene or β-carotene are usually extracted along with the MOAH fraction and interfere their detection. When applying a recently developed screening method for the analysis of mineral oil saturated hydrocarbons (MOSH) and MOAH in paper and cardboard by planar solid phase extraction (pSPE) to vegetable oils, native terpenes expectably interfered with MOAH analysis. Thus, an adaption of pSPE employing silver ions, named silver ion-planar solid phase extraction (Ag-pSPE), was developed in this study. Impregnation of thin-layers with silver nitrate (AgNO₃) was found to be very successful in retaining squalene and β-carotene. MOAH analysis of vegetable oils after saponification showed good repeatability (relative standard deviation (%RSD) <10%) and recoveries of 73.4-112.4% at a spiking level of 4.5 mg/kg (n = 4). For MOSH analysis, a simple solid phase extraction (SPE) clean-up with aluminum oxide removed native n-alkanes prior to Ag-pSPE. Recoveries for MOSH were 55.3-84.5% with %RSD <11% at a spiking level of 45.5 mg/kg (n = 4). Limits of decision and quantitation were at 7.2 and 22.2 ng/zone for MOSH and 1.1 and 3.4 ng/zone for MOAH, respectively, which corresponded to the recently introduced pSPE method, thus showing that analytes were not affected by the impregnation of HPTLC plates with AgNO₃. The method comparison with LC-GC showed similar results for MOSH, while the amounts for MOAH determined by Ag-pSPE were higher.

Offline Solid-Phase Extraction and Separation of Mineral Oil Saturated Hydrocarbons and Mineral Oil Aromatic Hydrocarbons in Edible Oils, and Analysis via GC with a Flame Ionization Detector

A method was developed for the determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) in edible oils, achieving similar limits of quantification than those obtained by online extraction methodologies, i.e., 0.5 mg/kg. The isolation of MOSH and MOAH was performed in a silver nitrated silica gel stationary phase prior to their analysis by gas chromatography–flame ionization detector (GC-FID). To improve the sensitivity, the simulated on-column injection method, using a suitable liner, was optimized. The method was validated at 0.5, 10.0 and 17.9 mg/kg, and recoveries ranged from 80 to 110%. Intra and inter-day precision were evaluated at the same levels, and relative standard deviation (RSD) was lower than 20%. The method was applied to a total of 27 samples of different types of oil previously analyzed in an accredited laboratory, detecting MOSH up to 79.2 mg/kg and MOAH up to 22.4 mg/kg.

High-throughput planar solid-phase extraction coupled to orbitrap high-resolution mass spectrometry via the autoTLC-MS interface for screening of 66 multi-class antibiotic residues in food of animal origin

Antibiotic residues in food pose a major threat to the health of humans and animals worldwide. Their trace-level analysis is still too time- and cost-intensive to be adequately covered in routine analysis. Thus, a new high-throughput planar solid-phase extraction method has been developed for rapid screening of 66 antibiotics. Via simple clicks on the image, the autoTLC-MS interface automatically eluted the target analyte zones directly into an orbitrap high-resolution mass spectrometer operated in the variable data-independent acquisition mode. Muscle tissue, cow milk and chicken eggs were analyzed regarding nine different antibiotic classes, including sulfonamides, diaminopyrimidines, lincosamides, pleuromutilins, macrolides, cephalosporins, penicillins, amphenicols and nitroimidazoles. The planar clean-up took 7 min per sample, which is 5-fold faster than the routine state-of-the-art. The screening method has been validated for one representative of each class according to the European Commission Decision 2002/657/EC. Most analytes were successfully detected at half of their required maximum residue limit.

Epoxidation for the analysis of the mineral oil aromatic hydrocarbons in food. An update

On-line coupled high performance liquid chromatography-gas chromatography-flame ionization detection (HPLC-GC-FID) used for determining mineral oil aromatic hydrocarbons (MOAH) in foods, particularly in certain oils and fats, may be disturbed by interfering olefins present as natural food components or resulting from raffination of the oils and fats. While some interference can be coped with by disregarding their peaks, others overload GC to the extent of obscuring the MOAH or form humps which need to be distinguished from the hump formed by the MOAH. In the latter cases, it is necessary to remove these interferences prior to HPLC-GC analysis. So far, epoxidation of the olefins to increase their retention time beyond that of the MOAH in HPLC is the best method available, though imperfect by causing some loss of MOAH and sometimes incomplete removal of the interference. Two methods are re-evaluated; preference is given to a slightly modified version of that proposed by Nestola and Schmidt. The performances are comparable: the losses of MOAH are similar and with both methods not all interfering olefins may be removed from refined edible oils. However, the Nestola/Schmidt method has practical advantages, the main ones being that no cooling is necessary and no solvent needs to be evaporated, which facilitates automation. Potential residual interferences must be recognized and subtracted, which can be by the characteristics of the hump they form in HPLC-GC-FID, by GCxGC-FID or by GCxGC-MS using characteristic mass fragments.