Simultaneous determination of the quaternary ammonium pesticides paraquat, diquat, chlormequat, and mepiquat in barley and wheat using a modified quick polar pesticides method, diluted standard addition calibration and hydrophilic interaction liquid chromatography coupled to tandem mass spectrometry

Carbon nanotubes stabilized in chitosan sponge (CNT-CS) as a new alternative clean-up sorbent for pesticide multiresidue determination in eggplants using QuEChERS and UHPLC-MS/MS

The continuous development and application of pesticides in agriculture require robust multiresidue detection methods to guarantee food safety. This study introduces a novel method for multiresidue determination of pesticides in eggplants using the QuEChERS procedure, incorporating a clean-up step using carbon nanotubes stabilized in chitosan sponge (CNT-CS) and ultra-high performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS) for analysis. Upon identifying the optimal extraction conditions, various sorbents were assessed for their efficacy in the dispersive solid-phase extraction (d-SPE). Among these, the biosorbent CNT-CS emerged as the most efficient and cost-effective material, showing the best recovery results from spiked blank samples. The validation demonstrated that the method was adequate for analyzing 111 pesticides in eggplant samples with practical method quantification limits from 5 to 25 µg kg-1. When applied to commercial eggplant samples, 27 pesticides were detected, demonstrating the importance of the proposed method. It is noteworthy that the conducted work represents the first report on the use of the biosorbent CNT-CS in the clean-up step of the QuEChERS method. The results obtained in the validation and application steps demonstrate that the proposed method is an excellent alternative for monitoring programs.

Optimization and validation of high throughput methods for the determination of 132 organic contaminants in green and roasted coffee using GC-QqQ-MS/MS and LC-QqQ-MS/MS

Recently some major safety concerns have been raised on organic contaminants in widely consumed plants such as coffee. Hence, this study aimed to develop specifically optimized methods for determining organic contaminants, such as pesticides and polychlorinated biphenyls (PCBs), in coffee using GC-MS/MS and LC-MS/MS. QuEChERS method was used as a base extraction method, and 27 experiments were studied using design of experiments with categorical variables (extraction buffers, cleanup sorbents, and coffee roasting degree) to find the optimum method for each matrix type. The optimum method for green coffee was acetate buffer and chitosan for clean-up, while no-buffer extraction and the PSA + C18 method were ideal for light and dark-roasted coffee. The optimized methods were validated in accordance with SANTE/11312/2021. Furthermore, ten real samples (4 green, and 6 roasted) from the markets were analysed; ortho-phenylphenol was found in all the roasted coffee samples, and carbendazim was found in one green coffee sample.

Development of LC-MS/MS analytical method for the rapid determination of Diquat in water and beverages

This study aimed to develop simple, fast, and sensitive methods for the determination of diquat (DQ) in various matrices such as water and beverages. For water, direct injection was tested first, however, the sensitivity of the incurred samples were too low and couldn't possibly achieve the targeted limit of quantification. Hence, dilution with "weaker" injection solvents were tested, and the final conditions involved the dilution of water with acetonitrile (0.4 % ammonium hydroxide) which increased the sensitivity by more than ten times. Nevertheless, the beverages samples needed further treatment to achieve acceptable spiked recovery. The final conditions involved extraction using the aforementioned solvent, followed by heating and partitioning. Both of the methods satisfied the validation requirements, with an average recovery ranging from 85.9 to115 % and associated relative standard deviation (RSD %) within the range 3-8. Further applications on real samples were done to test the levels of contamination.

Utilizing symmetrical tetramethyl cucurbit[6]uril-based supramolecular fluorescence probe for detection of paraquat in water

A supramolecular fluorescence probe has been developed using a symmetrical tetramethyl cucurbit[6]uril (TMeQ[6]) and a styryl derivative (SPy) with a host-guest ratio of 2:1. The introduction of paraquat (PQ) competes with SPy for the TMeQ[6] cavity, resulting in fluorescent quenching. The addition of 17 common herbicides and ions had negligible effects on the fluorescence quenching, indicating that the 2TMeQ[6]/SPy complex exhibits excellent selectivity in detecting PQ. The detection limit was found to be 4.62 × 10-7 M. More importantly, the probe was engineered to detect paraquat in river water by examining post-treatment samples and noting alterations in fluorescence color. The red to blue (R/B) intensity ratio is subsequently calculated to ascertain the PQ concentration. Experimental trials conducted on river water samples yielded recovery rates between 98.21 % and 108 %, with a relative standard deviation of less than 5 %. By pairing this with a smartphone-based colorimetric analysis application, we can facilitate portable PQ detection, enabling efficient and convenient monitoring across various locations.

The determination of underivatized chlormequat, fosetyl-aluminium and phosphonic acid residues in maize and soybean by LC-MS/MS

In this study, a simple, rapid and sensitive method was developed for the simultaneous determination of chlormequat, fosetyl-aluminium and phosphonic acid residues in maize and soybean using liquid chromatography-triple quadrupole mass spectrometry (LC-MS/MS). Analytes were extracted with acetic acid solution, purified on an HLB column, and then filtered through a 0.2 μm hydrophilic microporous filter membrane. They were then separated on an IC column using a separation phase consisting of polyvinyl alcohol particles with quaternary ammonium groups. The mobile phase optimised with water was denoted as mobile phase A and that optimised with 200 mmol L-1 ammonium bicarbonate solution containing 0.05% ammonium hydroxide was denoted as mobile phase B. The residues were detected by tandem mass spectrometry with negative electrospray ionization in a multi-reaction monitoring mode. The correlation coefficient (R ≥ 0.997) showed good linear regressions for all analytes in water as well as in maize and soybean matrices with a wide dynamic range of 0.001 to 0.5 mg L-1 for calibration. The mean recoveries (RSDs) of the analytes were in the range 85.0-106.4% (5.5-14.9%), 81.7-109.5% (2.7-11.0%) and 74.7-104.4% (2.9-6.1%) at three concentration levels (0.05, 0.1 and 1 mg kg-1) for the interday test (n = 15). The limit of quantification (LOQ) and detection (LOD) of the method for different matrices were 0.01 and 0.003 mg kg-1, respectively. In conclusion, the established analytical approach has high sensitivity and good accuracy and precision and is suitable for monitoring chlormequat, fosetyl-aluminium and phosphonic acid residues in maize and soybean.

Supramolecular Fluorescence Sensor Array Based on Cucurbit[8]uril Complexes Used for the Detection of Multiplex Quaternary Ammonium Pesticides

The simultaneous detection of multiple quaternary ammonium pesticides (QAPs) in water is a challenge due to their high solubility in water and similar structures. In this paper, we have developed a quadruple-channel supramolecular fluorescence sensor array for the simultaneous analysis of five QAPs, including paraquat (PQ), diquat (DQ), difenzoquat (DFQ), mepiquat (MQ), and chlormequat (CQ). Not only were QAP samples of different concentrations (10, 50, and 300 μM) in water distinguished with 100% accuracy but also single QAP and binary QAP mixed samples (DFQ-DQ) were sensitively quantified. Our experimental interference study confirmed that the developed array has good anti-interference ability. The array can quickly identify five QAPs in river and tap water samples. In addition, it also qualitatively detected QAP residues in Chinese cabbage and wheat seedlings extract. This array has rich output signals, low cost, easy preparation, and simple technology, demonstrating great potential in environmental analysis.

Monitoring and Exposure Assessment of Fosetyl Aluminium and Other Highly Polar Pesticide Residues in Sweet Cherry

Cherries are popular fruits due to their health benefits, organoleptic quality, and attractive appearance. Since highly polar pesticides are of low mass and amphoteric character, and are not amenable to traditional multi-residue extraction methods, they are more commonly not included in the pesticide monitoring program. This study aims to determine twelve highly polar pesticide residues in cherry samples intended for export from Turkey. A total of 16,022 cherry samples from 2018−2020 harvests in four production areas of Turkey were analyzed using a modification of the Quick Polar Pesticides method and liquid chromatography-tandem mass spectrometry. The method was validated at two fortification levels (0.01 and 0.05 mg kg−1), and good recoveries (87.4−111.4%) and relative standard deviations (<6%) were achieved for all analytes. The limits of quantification were in the range of 1.08−2.55 μg kg−1. Overall, 28.4% of the analyzed cherry samples were detected with phosphonic acid, calculated as fosetyl aluminium (fosetyl-Al) in amounts up to 77.7 mg kg−1. For 2304 samples (14.4%), the residues exceeded the European Union maximum residue level of 2 mg kg−1. There is no reason to be concerned about long-term exposure to phosphonic acid/fosetyl-Al, and the other highly polar pesticides through the consumption of sweet cherry.

A new class of quaternary ammonium compounds as potent and environmental friendly disinfectants

Quaternary ammonium compounds (QACs) are inexpensive and readily available disinfectants, and have been widely used, especially since the COVID-19 outbreak. The toxicity of QACs to humans has raised increasing concerns in recent years. Here, a new type of QACs was synthesized by replacing the alkyl chain with zinc phthalocyanine (ZnPc), which consists of a large aromatic ring and is hydrophobic in nature, similar to the alkyl chain of QACs. Three ZnPc-containing disinfectants were synthesized and fully characterized. These compounds showed 15-16 fold higher antimicrobial effect against Gram-negative bacteria than the well-known QACs with half-maximal inhibitory (IC50) values of 1.43 μM, 2.70 μM, and 1.31 μM, respectively. With the assistance of 680 nm light, compounds 4 and 6 had much higher bactericidal toxicities at nanomolar concentrations. Compound 6 had a bactericidal efficacy of close to 6 logs (99.9999% kill rate) at 1 μM to Gram-positive bacteria, including MRSA, under light illumination. Besides, these compounds were safe for mammalian cells. In a mouse model, compound 6 was effective in healing wound infection. Importantly, compound 6 was easily degraded at working concentrations under sunlight illumination, and is environmentally friendly. Thus, compound 6 is a novel and promising disinfectant.

[Determination of paraquat and diquat residues in urine samples based on solid-phase extraction and ultra performance liquid chromatography-high resolution mass spectrometry]

Determining the presence of paraquat (PQ) and diquat (DQ) in urine samples through physical and chemical testing is challenging. As PQ and DQ have characteristics such as high molecular polarity and good water solubility, they are difficult to be retained by conventional reversed-phase columns. Most of the methods in the literature use hydrophilic interaction chromatography (HILIC) for the retention of PQ and DQ, but they often require high concentrations of buffer salts as the mobile phase, which increase the contamination of the mass spectrometer. In view of the above problems, a rapid and accurate analysis method was developed for the determination of PQ and DQ residuals in urine samples based on weak cation exchange (WCX) solid-phase extraction (SPE) and ultra performance liquid chromatography-high resolution mass spectrometry (UPLC-HRMS) in this study. Urine samples were first diluted with phosphate buffer (pH=6.86) and pretreated using the WCX SPE method. Chromatographic separation was performed on a Syncronis HILIC column (100 mm×2.1 mm, 1.7 μm). An electrospray ion source in the positive (ESI⁺) mode and full mass-data dependent MS² (full mass-ddMS²) mode was used for quantification by matrix-matched external standard method. In this study, the concentration of ammonium formate in the mobile phase in the HILIC mode was effectively reduced to 10 mmol/L by the continuous optimization of the chromatographic conditions. MS optimization results indicated that the molecular ion (M^+·) of PQ and DQ had the strongest response. In addition, sample pretreatment conditions were also optimized. The obtained results indicated that the hydrophobic polytetrafluoroethylene (PTFE) filter membrane, acetonitrile-water (1∶1, v/v) as a fixing solution, and polypropylene vials were suitable for PQ and DQ analysis. Under the optimal conditions, the linearity of PQ and DQ was good with correlation coefficients (r²) greater than 0.998. The limits of detection (LODs, S/N≥3) and limits of quantification (LOQs, S/N≥10) were 0.2 μg/L and 0.6 μg/L, respectively. Mean spiked recoveries of PQ and DQ at the four spiked levels (1.0, 20.0, 100.0, and 200.0 μg/L) were in the range of 85.8%-101% and 80.3%-86.9%, with the RSDs of 0.8%-5.1% and 0.9%-4.2%. The established method was employed for the analysis and confirmation of PQ and DQ for clinical poisoning cases. In one case, a 23-year-old male who had taken approximately 20 mL of pesticide orally was confirmed as DQ poisoning by the developed method. DQ concentration monitoring of the urine samples was conducted for this case during the clinical treatment process. The patient was successfully discharged from the hospital after five times of blood perfusion and other treatments until the DQ concentration was low in the urine samples. In conclusion, the method developed in this study based on WCX SPE-UPLC-HRMS can be used for the confirmation of poisoning cases and concentration monitoring during clinical treatment, providing strong technical support for clinical precision treatment. The method is rapid, simple, sensitive, and accurate, and it is suitable for the detection of PQ and DQ in urine samples.

Regulation of Paraquat for wheat crop contamination

Paraquat is a highly toxic and persistent pesticide in soil but is still used for wheat crops in many countries. Paraquat can pose potential health hazards if it is translocated from soil into wheat grains, but no study is available for its possible translocation causing wheat grain contamination. The present study aimed at finding out Paraquat residue in wheat grains under field conditions for two crop seasons to explore the sustainability of this pesticide. The experiments were conducted scientifically under field conditions at agricultural fields Pusa, Delhi, India. The soil texture was classified as sandy loam. Paraquat dichloride 24% SL (herbicide) was applied on five fields except for control field. Paraquat in wheat grains was analyzed using HPLC equipped with a photodiode array (PDA) detector. The method of analysis was validated for the pesticide residue recovery. The results showed that there was an alarming concentration of Paraquat in wheat grains ranging between 21.6 and 49.02 mg kg^-1 against maximum residue level of 0.1 mg kg^-1. Paraquat was also found in control crop (3.1 mg kg^-1) due to background residue in soil even when no Paraquat was applied. Furthermore, wheat flour samples from market also gave alarming Paraquat residue (20.39, 25.88, and 27.68 mg kg^-1). Paraquat residue was primarily dependent on % clay in field soils. More the % clay lesser was Paraquat residue in wheat grain. Thus, Paraquat was translocated from soil into wheat grains and resulted in worrying concentration of Paraquat residue in wheat grains. Consequently, use of Paraquat for wheat crops needs to be regulated as it contaminated the soil and resulted in the wheat grain contamination posing severe health hazards for humans.

Design and synthesis of amphiphilic carboxyl-functionalized magnetic polymer microspheres for fast determination of paraquat and its four metabolites in human urine samples prior to ultra-high performance liquid chromatography-high resolution mass spectrometry

In cases of low concentration paraquat (PQ) poisoning, as the disease progresses over a long period of time, the prototype PQ may not be detected in the urine, which has a significant negative impact on the precise treatment of the poisoning. But PQ poisoning can also be confirmed by the detection of specific metabolites of PQ in the urine samples. In the present study, core-shell amphiphilic carboxyl-functionalized magnetic polymer microsphere (Amphiphilic-MPs-COOH) was prepared, and the as-prepared Amphiphilic-MPs-COOH was characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and thermogravimetry and differential thermogravimetry analyses (TG-DTG). Then, the Amphiphilic-MPs-COOH was employed as a magnetic solid-phase extraction (MSPE) adsorbent for pretreatment and rapid determination of PQ and its four metabolites from urine samples prior to ultra-high performance liquid chromatography-high resolution mass spectrometry (UPLC-HRMS). The extraction-elution conditions of Amphiphilic-MPs-COOH towards PQ and its metabolites were optimized in spiking urine samples to obtain the best MSPE efficiency. The adsorption mechanism of PQ and its metabolites by Amphiphilic-MPs-COOH involves electrostatic attraction and π-π stacking interactions. Moreover, the effect of different ratios of hydrophilic monomer NVP and functional monomer 4-VBA on the extraction and purification performance of PQ and its metabolites in urine samples. And the results revealed that both hydrophilic monomer and functional monomer were important for the adsorption of PQ and its metabolites, and the addition of the appropriate amount of the hydrophilic monomer NVP can improve the compatibility of the adsorbent with the urine substrate. In addition, this study compared the matrix effect of the Amphiphilic-MPs-COOH based MSPE method and the commercial Waters Oasis WCX SPE method. The results showed that the Amphiphilic-MPs-COOH based MSPE method developed in this paper had better resistance to matrix interference. Under optimal conditions, the recoveries of PQ and its metabolites were ranging from 84.5 to 103%, with relative standard deviations (RSDs) of 1.1-6.3%. While the limits of detection (LODs, S/N ≥ 3) and limits of quantification (LOQs, S/N ≥ 9) of the method were in range of 0.1-1.6 μg/L and 0.3-4.8 μg/L, respectively. Finally, the established MSPE-UPLC-HRMS method in this study was used to confirm PQ poisoning not only based on detecting PQ prototype, but also on its four metabolites, providing strong technical support for clinical precision treatment.

Determination of Avermectins Residues in Soybean, Bean, and Maize Using a QuEChERS-Based Method and Ultra-High-Performance Liquid Chromatography Coupled to Tandem Mass Spectrometry

Soybean, maize, and bean are crops of great economic importance, but in recent years have suffered with infestations of the caterpillar Helicoverpa armigera, with the main reason being the resistance of this pest to most pesticides. Avermectin emamectin benzoate was recently released to control this pest. Other avermectins, like abamectin, doramectin, eprinomectin, and ivermectin are used in large scale because they potent acaricidal, anthelmintic, and insecticidal activities. Thus, a simple and fast method for the determination of avermectins in these crops based on a quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction procedure and ultra-high performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS) analysis was developed and validated. For extraction, water followed by acetonitrile:isopropanol and a partition step with salts was stablished. With the clean-up step using activated EMR-Lipid, limits of detection of 1.2 μg kg−1 for abamectin, doramectin, emamectin benzoate, and ivermectin, and of 2.4 μg kg−1 for eprinomectin were achieved. The validation showed satisfactory results and the method was successfully applied to commercial samples, indicating that it is suitable for routine analysis.

Monitoring of Paraquat in soya products intended for animal feed

Even though paraquat is considered to be one of the most toxic herbicides, it is one of the most used ones. Paraquat-based preparations are heavily used across many important agricultural countries and for a lot of types of crops such as soya. As soya is used in large quantities in the feed production, paraquat residues in soya products are a potential threat to livestock. The aim of this study was to investigate whether soya products intended for animal feed contain residues of paraquat. Therefore, an optimized Quick Polar Pesticides (QuPPe) Method was developed. In total, 174 samples were analyzed via LC-MS/MS using zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC). The results showed that paraquat was detected in 66 % of the samples above 0.008 mg/kg. Residues were mainly present in soya bean meals that were imported from Brazil or the USA and cultivated using genetically modified soya. Around 5 % of the samples were not compliant with the European regulation on maximum residue levels of pesticides in or on food and feed. The results of this study support the view that paraquat residues play a significant role in soya products intended for animal feed and, thus, need to be controlled on a regular basis. However, for enforcement actions reliable processing factors for paraquat in soya products or maximum residue levels for processed soya products are urgently required.

Current Strategies for Studying the Natural and Synthetic Bioactive Compounds in Food by Chromatographic Separation Techniques

The present study summarizes the new strategies including advanced equipment and validation parameters of liquid and gas chromatography methods i.e., thin-layer chromatography (TLC), column liquid chromatography (CLC), and gas chromatography (GC) suitable for the identification and quantitative determination of different natural and synthetic bioactive compounds present in food and food products, which play an important role in human health, within the period of 2019–2021 (January). Full characteristic of some of these procedures with their validation parameters is discussed in this work. The present review confirms the vital role of HPLC methodology in combination with different detection modes i.e., HPLC-UV, HPLC-DAD, HPLC-MS, and HPLC-MS/MS for the determination of natural and synthetic bioactive molecules for different purposes i.e., to characterize the chemical composition of food as well as in the multi-residue analysis of pesticides, NSAIDs, antibiotics, steroids, and others in food and food products.

Sulfonic acid functionalized hierarchical porous covalent organic frameworks as a SALDI-TOF MS matrix for effective extraction and detection of paraquat and diquat

Design and construction of a matrix with specific adsorption on the target compounds can effectively reduce the detection limit of surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS) analysis. Sulfonic acid functionalized hierarchical porous covalent organic frameworks (H-COF-SO₃H) was synthesized by defect-structure and post-modification method, and then used as matrix and adsorbent for the determination of quaternary ammonium herbicides paraquat (PQ) and diquat (DQ). N₂ adsorption-desorption experiments confirmed that H-COF-SO₃H possesses hierarchical porosity with pore widths concentrated at 1.3,1.5, and 2.8 nm. The strong UV absorption at 200-450 nm and good thermal stability made H-COF-SO₃H being a promising matrix without background interference. H-COF-SO₃H can efficiently enrich PQ and DQ via electrostatic attraction, and the key role of -SO₃H group on specific adsorption was confirmed by density functional theory (DFT) calculations. The limits of detection (LODs) for PQ and DQ with H-COF-SO₃H enrichment were 0.5 and 0.1 ng·mL^-1, respectively, which were 20 and 60 times higher than those without H-COF-SO₃H enrichment, respectively. The spiked recoveries of PQ and DQ for the three food samples were 92.0-113.2% and 80.1-102.6% with RSDs of 2.2-9.2% and 2.0-8.7%, respectively. This work provides an analyte-oriented approach for fabricating SALDI-TOF MS matrix.

Development, validation, and application of a multi-method for the determination of mycotoxins, plant growth regulators, tropane alkaloids, and pesticides in cereals by two-dimensional liquid chromatography tandem mass spectrometry

Mycotoxins and pesticides regularly co-occur in agricultural products worldwide. Thus, humans can be exposed to both toxic contaminants and pesticides simultaneously, and multi-methods assessing the occurrence of various food contaminants and residues in a single method are necessary. A two-dimensional high performance liquid chromatography tandem mass spectrometry method for the analysis of 40 (modified) mycotoxins, two plant growth regulators, two tropane alkaloids, and 334 pesticides in cereals was developed. After an acetonitrile/water/formic acid (79:20:1, v/v/v) multi-analyte extraction procedure, extracts were injected into the two-dimensional setup, and an online clean-up was performed. The method was validated according to Commission Decision (EC) no. 657/2002 and document N° SANTE/12682/2019. Good linearity (R2 > 0.96), recovery data between 70-120%, repeatability and reproducibility values < 20%, and expanded measurement uncertainties < 50% were obtained for a wide range of analytes, including very polar substances like deoxynivalenol-3-glucoside and methamidophos. However, results for fumonisins, zearalenone-14,16-disulfate, acid-labile pesticides, and carbamates were unsatisfying. Limits of quantification meeting maximum (residue) limits were achieved for most analytes. Matrix effects varied highly (-85 to +1574%) and were mainly observed for analytes eluting in the first dimension and early-eluting analytes in the second dimension. The application of the method demonstrated the co-occurrence of different types of cereals with 28 toxins and pesticides. Overall, 86% of the samples showed positive findings with at least one mycotoxin, plant growth regulator, or pesticide.

Cucurbit[7]uril as a matrix solid-phase dispersion for the extraction of quaternary ammonium pesticides from vegetables and their determination using HPLC-UV

Cucurbit[7]uril (Q[7]) was first used as a dispersant sorbent material in a matrix solid-phase dispersion for the simultaneous extraction of four quaternary ammonium pesticides from vegetables before analysis using high-performance liquid chromatography with UV detection. Q[7] exhibited a better selectivity and adsorption capability for these compounds, which is due to its ability to bind selectively organic molecules into its hydrophobic cavity and to form stable host-guest inclusion complexes. Various parameters affecting the extraction were investigated and optimized, such as sorbent/sample mass ratio, grinding time, rinsing and eluting conditions. Under optimized conditions, the proposed method exhibited a linear response in the concentration range of 1-100 μg·kg^-1, satisfactory recoveries for eight types of vegetable samples (>70%), and high repeatability (RSD < 9.0%). The limits of quantification were between 0.43 μg·kg^-1 and 0.99 μg·kg^-1, which is nearly 50 times lower than the maximum residue limits established by the European Council.

HLB-MCX-Based Solid-Phase Extraction Combined with Liquid Chromatography-Tandem Mass Spectrometry for the Simultaneous Determination of Four Agricultural Antibiotics (Kasugamycin, Validamycin A, Ningnanmycin, and Polyoxin B) Residues in Plant-Origin Foods

An ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was established for the determination of four highly polar agricultural antibiotics kasugamycin, validamycin A, ningnanmycin, and polyoxin B in plant-derived foods. The samples were extracted with a 0.2% formic acid solution, purified by hydrophilic-lipophilic balance and mixed-mode cation-exchange solid-phase extraction, and then reconstituted for UPLC-MS/MS detection. The chromatographic analysis was performed on a BEH Amide column (100 mm × 2.1 mm, 1.7 μm) using gradient elution with a 0.1% formic acid solution and 0.1% formic acid acetonitrile as mobile phases. Method validation was performed on 15 matrices spiked at 0.02 (or 0.05), 0.5, and 2 mg/kg. The mean recovery rate ranged from 75 to 102% with relative standard deviations (RSD) was less than 20%. Good linearities (r > 0.99) in the range of 0.002-0.2 μg/mL were obtained. The limits of quantification (LOQs) were 0.02 and 0.05 mg/kg. Studies on the stability of the analytes in the stored kiwifruit samples showed that kasugamycin, validamycin A, and ningnanmycin were stable for at least 6 months, while polyoxin B was observed to be partially degraded (the degradation rate at 6 months was 31.3%). The method was demonstrated to be effective and reliable in real samples. In the kiwifruit samples treated after 7 days, no residues of ningnanmycin and polyoxin B were detected, while the residues of kasugamycin and validamycin A were 0.12 and 0.038 mg/kg, respectively.

A simple, versatile, and automated pulse-diffusion-focusing strategy for sensitive milliliter-level-injection HILIC-MS/MS analysis of hydrophilic toxins

The measurement of trace hydrophilic toxins in complex aqueous-rich matrices is a daunting challenge. To address this analytical bottleneck, pulse diffusion focusing (PDF), a novel sample injection technique for hydrophilic interaction chromatography-tandem mass spectrometry (HILIC-MS/MS), was developed. Theoretical and experimental investigations of the mechanism and key parameters revealed that the pulse-injection approach, assisted by solvent diffusion, efficiently solved the volume overload problem. This milliliter-level-injection HILIC-MS/MS technique was reported for the first time herein, and provided a significant enhancement in sensitivity compared to the conventional injection method, in addition to being an efficient approach to address the solvent incompatibility of off-line sample preparation and HILIC. The automated PDF-HILIC-MS/MS system was obtained by slightly modifying a commercial LC-MS/MS instrument in an easy and economical manner. The efficiency of the system was demonstrated through the detection of trace tetrodotoxin contents in plasma and urine samples. Low limits of detection (i.e., 0.65 and 2.2 ng·mL^-1) were obtained using the simplified sample preparation method. The recoveries were in the range 91-113.3 % with intra-day and inter-day precisions of ≤9.6 %. Further experimental results proved the method to be versatile for various hydrophilic toxins.

Balls-in-tube matrix solid phase dispersion (BiT-MSPD): An innovative and simplified technique for multiresidue determination of pesticides in fruit samples

Sample preparation of complex matrices, like food samples, continues to be a challenge demanding great effort for improvements. In this study, a new technique named balls-in-tube matrix solid-phase dispersion (BiT-MSPD) is proposed based on a simplification of the conventional MSPD technique being all sample preparation performed directly in a closed extraction tube with the assistance of steel balls. An innovative method using BiT-MSPD was successfully established for the determination of 133 pesticide residues in apple, peach, pear and plum by ultra-high performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS). Several sorbents were evaluated as solid support in different proportions with the sample. The homogenization step using mortar, glass rod or steel balls, with methanol and acetonitrile as extraction solvent, was evaluated. Vortex and ultrasound assisted extractions were also tested. Best results were obtained with C18, homogenization with steel balls, acetonitrile as solvent and ultrasound assisted extraction. Validation presented adequate trueness and precision results for the evaluated pesticides with recovery results ranging from 72 to 113% and RSD ≤ 17%. Practical limit of detection (LOD) and quantification (LOQ) for the compounds were 3 and 10 µg kg^-1, respectively. The developed method proved to be easier and faster to perform than the MSPD, considering that extraction and clean-up are performed in the same tube without the need to transfer to cartridges, recipients or to use a separate clean-up step. The proposed BiT-MSPD technique was successfully applied to fruit samples and has great potential to be applied in other matrices, like cereals and meat, since the steel balls promote an efficient sample dispersion and extraction of pesticides. The BiT-MSPD permit a fully automation of the entire sample preparation step.

N-acetylcysteine alleviated paraquat-induced mitochondrial fragmentation and autophagy in primary murine neural progenitor cells

The developing brain is uniquely vulnerable to toxic chemical exposures. Studies indicate that neural stem cell (NSC) self-renewal is susceptible to oxidative stress caused by xenobiotics. However, the impact of antioxidants on NSC self-renewal and the potential mechanisms remain elusive. In this study, primary murine neural progenitor cells (mNPCs) from the subventricular zone were used as a research model. In addition, paraquat (PQ) was used to elicit oxidative stress and N-acetylcysteine (NAC) was used as a powerful antioxidant. mNPCs were treated with 80 μm PQ for 24 hours with or without 4 hours of NAC pretreatment. Our results showed that PQ treatment increased intracellular reactive oxygen species production, decreased cell viability and DNA synthesis, and promoted cell apoptosis. Meanwhile, pretreatment with NAC alleviated PQ-induced cytotoxicity in mNPCs. To elucidate the mechanisms further, we found that NAC pretreatment prevented PQ-induced reactive oxygen species production, mitochondrial fragmentation and autophagy in mNPCs. NAC-pretreated cells showed increased anti-apoptotic protein Bcl-2 and decreased pro-apoptotic protein Bax expression. Similarly, NAC pretreatment increased p-mTOR and decreased LC3B-II protein expression. Moreover, NAC decreased mitophagy related mRNA Pink1 and Parkin expression. Taken together, our results suggested that the antioxidant NAC treatment significantly attenuated PQ-induced mNPC self-renewal disruption through decreasing autophagy and salvaging mitochondrial morphology. These findings revealed a potential mechanism for neurological treatment relating to antioxidant and suggested potentially relevant implications for PQ-related neurodegenerative disorders. Thus, our study also provided insight into therapeutic strategies for the neurotoxic effects of oxidative stress-associated toxicants.