Evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets for the determination of triazole fungicides in water samples by high-performance liquid chromatography

Quick synthesis of CoFe-PBA@GO with electrochemical method as a novel, sensitive, and degradable nanocomposite applied in nanofibers for triazole extraction before HPLC-UV analysis

Today, the wide use of triazole fungicides due to environmental damage and its side effects has raised global concern. Hence, in this research, poly-vinyl alcohol/polyacrylic-acid/CoFe-PBA@GO electrospun nanofiber was synthesized and applied as effective, degradable, and novel adsorbent at pipette-tip microextraction (PT-μSPE) method for the rapid and concurrent extraction of five of triazole fungicides in fruit and vegetable samples prior to quantitative analysis by high-performance liquid chromatography-ultraviolet. The incorporation of CoFe-PBA@GO with superporous structure and abundant functional groups in a polymer medium improves the extraction efficiency of nanofibers due to hydrogen bonding and π-π interactions formed between analytes and synthesized nano-adsorbent. Various important elements that affect the extraction yield of the target analytes were optimized utilizing a time-variable approach. Under the optimum conditions, dynamic range was attained in the range of 0.3-900.0 ng/mL with correlation coefficients ≥ 0.999. The identification limit of the PT-μSPE-HPLC-UV method ranged from 0.1 to 0.3 ng/mL.

Stereoselective analysis of chiral pesticides: a review

Chiral organic pollutants, including pesticides, herbicides, medicines, flame retardants, and polycyclic musk, represent a significant threat to both the environment and human health. The presence of asymmetric centers in the structure of chiral pesticides introduces stereoisomers with distinct distributions, fates, biomagnification capacities, and cytotoxicities. In aquatic environments, pesticides, as persistent/pseudo-persistent compounds, have been detected in substantial quantities, posing severe risks to non-target species and, ultimately, public health through water supply and food exposures. In response to this environmental challenge, stereoselective analytical methods have gained prominence for the identification of pesticide/drug enantiomers in recent years. This review examines the environmental impact of chiral pesticides, emphasizing the distinct biological activities and distribution patterns of their stereoisomers. By highlighting the advancements in liquid chromatography for enantiomeric analysis, the review aims to underscore the urgent need for a comprehensive understanding of these pollutants to facilitate informed remediation strategies and ensure the safer dispersal of chiral organic pollutants in the environment, thereby addressing the potential risks they pose to ecosystems and human health. Future research should focus on developing sustainable and efficient methodologies for the precise analysis of stereoisomers in complex matrices, particularly in sewage water, emphasizing the importance of sewage processing plants in ensuring water quality.

An effervescence-assisted switchable deep eutectic solvent based liquid-phase microextraction of triazole fungicides in drinking water and beverage

A new effervescence-assisted switchable deep eutectic solvent-based liquid phase microextraction (EA-SDES-LPME) combined with HPLC-UV was developed for determination of common triazole fungicides in drinking water and beverages, including myclobutanil, flusilazole, hexaconazole and bitertanol. The alternative extraction solvent was prepared with hexafluoroisopropanol and dipropylamine with the merits of time-saving, easy to collect and cost-effectiveness. The SDES can be reversibly switched between hydrophilic and hydrophobic states by pH adjustment. The homogeneous extraction was achieved under the hydrophilic form of SDES, and the bi-phase separation was obtained easily by adjusting pH value to restore the original hydrophobicity. Moreover, the characterization of SDES was investigated by FTIR and 1H NMR. The main variables affecting extraction efficiency were optimized in detail. Under the optimal conditions, the proposed method shows desirable precision (RSDs less than 18.5%) and acceptable recovery (72.6-95.4%). The lower limits of detection and limits of quantitation were found to be in the range of 1-2 μg L-1 and 5-10 μg L-1, respectively. The formation mechanism of SDES and the extraction mechanism for target analytes were investigated by density functional theory. The proposed methodology was simplicity, sensitive, time-saving and successfully applied to determine triazole fungicides in drinking water and beverages, making it an alternative technique for the analysis of trace analytes with satisfactory sensitivity.

Modified DLLME-GC-TQMS determination of pesticide residues in Gomti River, Lucknow, India: ecological risk assessment and multivariate statistical approach

This research article aims to establish an easy and well-defined analytical method for detection and quantification of multiclass pesticides in Gomti river water samples because the increased agricultural activities, industrialization, and urbanization had increased the presence of pesticides in the ecosystem which causes the depletion of water quality making it a global concern. The analytical method, vortex-assisted ultrasonication-based dispersive liquid-liquid microextraction-solidification of floating organic droplets (VAUS-DLLME-SFO) was optimized using one parameter at a time approach which gave the recovery between 69.45 and 114.15%, limit of detection (LOD), and limit of quantification (LOQ) 0.0011-0.0111 µg/L and 0.0033-0.0368 µg/L, respectively, and RSD in the range of 0.75-1.29 which shows sensitivity and accuracy better than earlier reported methods. The data obtained were subjected to measurement uncertainty, risk assessment, and multivariate statistical analysis to establish the robustness of the developed analytical method. The measurement uncertainty found was concluded to be in the acceptable range for analytical results. Furthermore, the real samples were analyzed and the associated value of the risk quotient was found to be less than 1, except for aquatic invertebrates, establishing the fact that the current concentration of pesticides has no such negative threat to flora and fauna. The possible source of pesticides in the Gomti river system was established by multivariate analysis. It was thus concluded that anthropogenic activity is responsible for the variable concentration of pesticides found in the sample.

An In Situ Formation of Ionic Liquid for Enrichment of Triazole Fungicides in Food Applications Followed by HPLC Determination

An in situ formation of ionic liquid was used for preconcentration of four triazole fungicides in food samples. The microextraction method was used for the first time in the literature for preconcentration of triazole fungicides. In the developed method, tributylhexadecylphosphonium bromide ([P₄₄₄₁₂]Br) and potassium hexafluorophosphate (KPF₆) were used for the formation of hydrophobic ionic liquid. After centrifugation, the fine microdroplets were produced in one step, providing the extraction step in a quick and environmentally friendly manner. The functional group of the hydrophobic ionic liquid was investigated using FT-IR. Various extraction parameters were studied and optimized. In the extraction method, 0.01 g of [P₄₄₄₁₂]Br and 0.01 g of KPF₆, centrifugation at 4500 rpm for 10 min were used. The optimized technique provided a good linear range (90-1000 μg L^-1) and high extraction recovery, with a low limit of detection (30-50 μg L^-1). Methods for the proposed in situ formation of ionic liquid were successfully applied to honey, fruit juice, and egg matrices. The recoveries were obtained in a satisfactory range of 62-112%. The results confirmed the suitability of the proposed microextraction method for selective extraction and quantification of triazole fungicides.

Rapid analysis of triazine herbicides in fruit juices using evaporation-assisted dispersive liquid-liquid microextraction with solidification of floating organic droplets and HPLC-DAD

A rapid and convenient analytical procedure (evaporation-assisted dispersive liquid-liquid microextraction with solidification of floating organic droplets) is advanced for determining the concentrations of triazine herbicide residues (e.g. simazine and atrazine) in fruit juices via HPLC-DAD. The technique involves adding 1-dodecanol (low density) and dichloromethane (high density) to the test solution to act as the extraction and volatile solvents, respectively. Calcium oxide is added to generate heat to accelerate the evaporation of dichloromethane, whereupon the 1-dodecanol quickly disperses into small droplets to complete the microextraction process. Thus, there is no need to use a dispersive solvent and heating equipment is also not required. The floating 1-dodecanol is subsequently frozen using an ice bath to facilitate its separation from the sample. Under optimal conditions (250 μL of 1-dodecanol (extraction solvent), 150 μL of CH₂Cl₂ (volatile solvent), 1250 mg of CaO, and an extraction time of 60 s) the detection procedure is linear over the range 0.05-5 μg mL^-1 (with R > 0.99). The limits of detection (LOD) and quantification (LOQ) were determined to be 0.0022-0.0034 μg mL^-1 and 0.0073-0.0113 μg mL^-1, respectively. The recovery of simazine and atrazine in three fruit juices ranged between 78.5% and 96.4% with a relative standard deviation <8.2%. Therefore, the proposed approach can be effectively adopted to analyze the triazine herbicide content in fruit juices. The method has been proved to be simple, reliable, and remarkably efficient.

Molecularly Imprinted Silica-Coated CdTe Quantum Dots for Fluorometric Determination of Trace Chloramphenicol

A dual recognition system with a fluorescence quenching of quantum dots (QDs) and specific recognition of molecularly imprinted polymer (MIP) for the detection of chloramphenicol (CAP) was constructed. MIP@SiO₂@QDs was prepared by reverse microemulsion method with 3-aminopropyltriethoxysilane (APTS), tetraethyl orthosilicate (TEOS) and QDs being used as the functional monomer, cross-linker and signal sources, respectively. MIP can specifically recognize CAP, and the fluorescence of QDs can be quenched by CAP due to the photo-induced electron transfer reaction between CAP and QDs. Thus, a method for the trace detection of CAP based on MIP@SiO₂@QDs fluorescence quenching was established. The fluorescence quenching efficiency of MIP@SiO₂@QDs displayed a desirable linear response to the concentration of CAP in the range of 1.00~4.00 × 10² μmol × L⁻¹, and the limit of detection was 0.35 μmol × L⁻¹ (3σ, n = 9). Importantly, MIP@SiO₂@QDs presented good detection selectivity owing to specific recognition for CAP, and was successfully applied to quantify CAP in lake water with the recovery ranging 102.0~104.0%, suggesting this method has the promising potential for the on-site detection of CAP in environmental waters.

Development of a colorimetric sensor array based on monometallic and bimetallic nanoparticles for discrimination of triazole fungicides

Due to the widespread use of pesticides and their harmful effects on humans and wildlife, monitoring their residual amounts in crops is critically essential but still challenging regarding the development of high-throughput approaches. Herein, a colorimetric sensor array has been proposed for discrimination and identification of triazole fungicides using monometallic and bimetallic silver and gold nanoparticles. Aggregation-induced behavior of AgNPs, AuNPs, and Au-AgNPs in the presence of four triazole fungicides produced a fingerprint response pattern for each analyte. Innovative changes to the metal composition of nanoparticles leads to the production of entirely distinct response patterns that can be used for the detection and discrimination of triazoles. Pattern recognition methods, including linear discriminant analysis (LDA) and hierarchical cluster analysis, have been employed for the differentiation of triazoles in the concentration range of 0.1-0.55 μg mL^-1. Besides, the sensor array demonstrates promising practicability to satisfactorily distinguished triazole in mixtures and complex media of wheat flour and cucumber samples. The proposed colorimetric sensor array might pave the way towards a cost-effective and rapid, yet sensitive platform for high-throughput monitoring of residual amounts of pesticides for on-site applications.

Analytical methods to analyze pesticides and herbicides

This paper reviews studies published in 2019, in the area of analytical techniques for determination of pesticides and herbicides. It should be noted that some of the reports summarized in this review are not directly related to but could potentially be used for water environment studies. Based on different methods, the literatures are organized into six sections, namely extraction methods, electrochemical techniques, spectrophotometric techniques, chemiluminescence and fluorescence methods, chromatographic and mass spectrometric techniques, and biochemical assays. PRACTITIONER POINTS: Totally 141 research articles have been summarized. The review is divided into six parts. Chromatographic and mass spectrometric techniques are the most widely used methods.

Sequential extraction and enrichment of pesticide residues in Longan fruit by ultrasonic-assisted aqueous two-phase extraction linked to vortex-assisted dispersive liquid-liquid microextraction prior to high performance liquid chromatography analysis

A simple, green and efficient method for extraction, purification and enrichment of pesticide residues of triazoles and pyrethroids in Longan fruit was developed by ultrasonic-assisted aqueous two-phase extraction (UAATPE) coupled to vortex-assisted dispersive liquid-liquid microextraction (VADLLME). Using an aqueous two-phase system (ATPS) of ethanol/K₂HPO₄ as extraction solvent, the composition of the ATPS, extraction temperature and time were investigated, respectively. Then VADLLME process also was optimized by investigating type and volume of extracting and dispersive solvents, vortex-assisted time and salt addition. The optimum conditions were as follows: the ATPS composition of ethanol concentration 30.0% (w/w) and K₂HPO₄ concentration 25% (w/w), extraction temperature 70 °C and extraction time 15 min for UAATPE; 1-dodecanol 200 μL as extraction solvent, ethanol 1.25 mL as dispersive solvent, vortex-assisted time 1.5 min and addition of NaCl 4% (w/v) for VADLLME. Ethanol as extraction solvent and dispersive solvent could directly connect UAATPE with VADLLME without extra steps. By means of HPLC-DAD detection, nine pesticides had good linearity ranged from 0.0200 to 13.59 μg/mL (R² ≥ 0.9957). LODs and LOQs were in the range of 0.005576-0.01740 μg/mL and 0.01859-0.05010 μg/mL, respectively. UAATPE-VADLLME coupled to HPLC was successfully applied to simultaneous determination of multiple pesticides in Longan fruit, and mean recoveries and RSDs were between 76.95% and 98.63%, 1.2% and 9.8%, respectively. Furthermore, myclobutanil, fenpropathrin and deltamethrin were detected in pericarp and pulp of Longan samples from different districts, respectively.

Dispersive liquid-liquid microextraction based on the solidification of floating organic droplets for HPLC determination of three strobilurin fungicides in cereals

In this paper, a dispersive liquid-liquid microextraction method based on the solidification of floating organic droplets, combined with high-performance liquid chromatography (DLLME-SFOD-HPLC), was developed for the detection of strobilurin fungicides (azoxystrobin, pyraclostrobin, and trifloxystrobin) in cereals. Natural fatty acids were used as an extractant and have low toxicity, density, and freezing point. The extractant nonanoic acid was evenly dispersed as droplets in sample solution and was then solidified in the upper layer of sample solution after centrifugation and ice bath, which improved the extraction and collection efficiency. The dispersive liquid-liquid microextraction procedure was optimised by univariate analysis and the Box-Behnken response surface methodology. Optimum conditions were as follows: the volume of nonanoic acid was 82 μL, the volume of acetonitrile was 620 μL, and the amount of salt was 256 mg. Under optimised conditions, the method had good linearity with a correlation coefficient higher than 0.997, and the limit of detection was 2.57-4.87 μg kg^-1. The recoveries of azoxystrobin, pyraclostrobin, and trifloxystrobin in rice, corn, and wheat were 82.0%-93.2%, and the relative standard deviations were 1.6%-7.4%. Therefore, the method was successfully applied to detect target fungicides in cereals.

Magnetic graphene oxide-ultrathin nickel–organic framework composite for the extraction and determination of epoxiconazole in food samples

In this work, a magnetic graphene oxide-ultrathin metal–organic framework composite (Fe₃O₄@SiO₂-GO-Ni-MOF) was synthesized for the first time. Employing Fe₃O₄@SiO₂-GO-Ni-MOF composite as extractant, a novel method for the separation and analysis of the pesticide epoxiconazole was established with the assistance of high performance liquid chromatography (HPLC). The adsorption mechanisms were studied including by adsorption kinetics, thermodynamic parameters and adsorption isotherms. The experimental results showed that this method was convenient, operable, effective and practical for the extraction and determination of epoxiconazole in real samples.

Schematic illustration for the MSPE procedures.

Air-assisted ionic liquid dispersive liquid-liquid microextraction based on solidification of the aqueous phase for the determination of triazole fungicides in water samples by high-performance liquid chromatography

A simple, rapid, and environmentally friendly approach was introduced to determine triazole fungicides in water samples by air-assisted ionic liquid dispersive liquid-liquid microextraction based on solidification of the aqueous phase using high-performance liquid chromatography-diode array detection. Ionic liquid was applied as the extraction solvent rather than a high-toxicity extraction solvent. The air-assisted dispersion method induced a trace amount of the ionic liquid to disperse as small droplets in the water sample, which significantly increased the contact area between the organic phase and the aqueous phase for the rapid transfer of target fungicides without using a dispersion solvent or auxiliary extraction devices. The solidification of the aqueous phase facilitated the collection of extraction solvent. The type of extraction solvent, the volume ratio of the extraction solvent to the water sample, the number of extraction cycles, the addition of NaCl, and pH values were evaluated. The recoveries were 72.65-100.13% with a relative standard deviation of 0.92% to 5.99%. The limits of quantification varied from 0.65 ng mL^-1 to 1.83 ng mL^-1. This approach can be used to determine fungicides in ground, river, and lake water samples.