PEG-modified magnetic Schiff base network-1 materials for the magnetic solid phase extraction of benzoylurea pesticides from environmental water samples

Magnetic covalent organic frameworks as sorbents in the chromatographic analysis of environmental organic pollutants

Covalent organic frameworks (COFs) are featured with large specific surface areas, good thermal stability, and abundant pores. These properties are exactly what the sorbents used for extraction or adsorption of interest substances are desired with. While, the low density and hydrophobicity of COFs often makes them difficult to be dispersed evenly and recovered from the aqueous solution. Magnetic covalent organic frameworks (MCOFs) inherit magnetic property of the magnetic particles and porous structure of COFs. They have improved dispersity in aqueous solution and phase separation can be rapidly achieved via external magnetic fields. This review summarized the synthesis strategies for MCOFs, and their application in trace environmental organic pollutants analysis by chromatography techniques. The selection of COFs types and modification with active groups for a certain adsorption purpose is discussed, along with the exploration of adsorption mechanisms, which is beneficial for the design and synthesis of MCOFs.

Bacteria-templated ZIF-8 embedded in polyacrylonitrile nanofibers as a novel sorbent for thin film microextraction of benzoylurea insecticides

In the present work, the rod-like ZIF-8 (ZIF8@E coli) was prepared by fast, easy and environmentally friendly method of biomimetic mineralization with Escherichia coli bacteria as a bio-template and was exploited for the first time in the microextraction. In this regard, electrospun nanofiber mats of polyacrylonitrile (PAN) and ZIF8@E coli were prepared by electrospinning method and used as a new sorbent for thin film microextraction (TFME) of benzoylurea insecticides such as Hexaflumuron and Teflubenzuron as model analytes. The PAN/ZIF8@E coli nanocomposite was characterized using electron scanning microscopy and various spectroscopy techniques. Factors affecting the proposed extraction method were screened and optimized using the experiment design strategy. Then, the model analytes were measured by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detector after microextraction. Satisfactory figures of merit were obtained for suggested TFME-HPLC-UV under optimum conditions. The suitable linearity varied in the range of 0.5-200 μg L-1 with R2 greater than 0.9968. The limit of detections for Hexaflumuron and Teflubenzuron were 0.12 and 0.15 μg L-1, respectively. The application of the method in the real sample was investigated by analyzing the selected analytes in environmental water and food samples. The spiking recovery of the selected analytes varied in the range of 93.0-109.8 % (RSD≤7.68). The results confirm the efficient application of this new sorbent in TFME approach. Considering the high availability, ease of production, and environmental friendliness of bacteria along with the significant improvement of metal-organic framework (MOF) growth efficiency, biomimetic mineralization is expected to be efficient method for the synthesis of ordered MOFs for use in extraction fields.

Recent progress in the synthesis and applications of covalent organic framework-based composites

Covalent organic frameworks (COFs) have historically been of interest to researchers in different areas due to their distinctive characteristics, including well-ordered pores, large specific surface area, and structural tunability. In the past few years, as COF synthesis techniques developed, COF-based composites fabricated by integrating COFs and other functional materials including various kinds of metal or metal oxide nanoparticles, ionic liquids, metal-organic frameworks, silica, polymers, enzymes and carbon nanomaterials have emerged as a novel kind of porous hybrid material. Herein, we first provide a thorough summary of advanced strategies for preparing COF-based composites; then, the emerging applications of COF-based composites in diverse fields due to their synergistic effects are systematically highlighted, including analytical chemistry (sensing, extraction, membrane separation, and chromatographic separation) and catalysis. Finally, the current challenges associated with future perspectives of COF-based composites are also briefly discussed to inspire the advancement of more COF-based composites with excellent properties.

Unraveling the cytotoxicity and cellular uptake of low, medium and high molecular weight polyethylene glycol polymers in MCF-7 cells by green UPLC-MS/MS methods

Unraveling the cytotoxicity and cellular uptake of low, medium and high molecular weight polyethylene glycol (PEG) in cells is important for evaluation of therapeutic efficacy and toxicity of PEGylated drug delivery systems. In this study, cellular uptake of PEG600, PEG2K, PEG4K and PEG10K in MCF-7 cells was first studied by an UPLC-MS/MS assay coupled with collision induced dissociation (CID) in source technique. The CID of PEG in source with high values of declustering potentials generates numerous PEG-related product ions. These PEG-related fragment ions can be further broken into specific product ions in the collision cell as alternative ions for detection of PEG. The quantification of PEG was finally performed with the MRM transition (m/z 221.0 → 89.0). The experimental results indicated that the toxicity of PEG600, PEG2K, PEG4K and PEG10K was not significant at concentrations of 5-1200 μg/mL and the amounts of PEG polymers entry into MCF-7 cells at was small. The greenness of the developed analytical methods was also assessed by Analytical Eco-Scale, Analytical Greenness calculator (AGREE) and Green Analytical Procedure Index (GAPI) in this study.

Preparation of an efficient magnetic nano-sorbent based on modified cellulose and carboxylated carbon nano-tubes for extraction of pesticides from food and agricultural water samples before GC-FID analysis

This paper reports the direct synthesis approach of carboxamide functionalized magnetic nano-composite named Fe₃O₄@SiO₂-NH₂@dialdehyde cellulose (DAC)@CNT-COOH as an effectual sorbent for the co-extraction of seven agricultural insecticides and herbicides from vegetable, fruit, and water samples using the magnetic dispersive micro-solid-phase extraction procedure. Under the optimized extraction conditions (sorbent amount: 18.1 mg; desorption time: 6.5 min; desorption solvent volume: 185 μL; desorption solvent: acetonitrile; extraction time: 9.5 min; pH of sample solution: 7.0, and salt content: 5.0 % w/v sodium chloride), good linearity within the range 0.5-1200 ng/mL (R² ≥ 0.998) was achieved. Extraction efficiencies were in the range 63.4-84.1 %, the limits of detection were 0.08-1.0 ng/mL, and acceptable relative recoveries (87.6-103.8 %), and precisions were also achieved (RSDs < 6.8 %, n = 3). Ultimately, the obtained results showed that the developed method could be applied to determine trace amounts of desired analytes in various agricultural water and food samples.

Direct solidification of switchable-hydrophilicity salicylic acid: A design for the on-site dispersive liquid-liquid microextraction of benzoylurea insecticides in water and honey samples

This study describes the development of a fully manual method for on-site dispersive liquid-liquid microextraction based on the direct solidification of switchable-hydrophilicity salicylic acid (on-site DLLME-DSSA) coupled with high-performance liquid chromatography with an ultraviolet detector (HPLC-UVD) and its utilization for the detection of benzoylurea insecticides (BUs) in water and honey samples. Salicylic acid (SA), a switchable hydrophilic aromatic acid, was used as an extraction solvent. It can be converted into the hydrophobic/hydrophilic forms in pH-changeable solutions, facilitating facile and effective dispersion and phase separation. Moreover, the melting point of SA (significantly higher than room temperature) enables its direct solidification without an ice-water bath, facilitating its collection by filtration. The dispersion, separation, and collection of the extraction solvent were carried out entirely in a plastic syringe without requiring special apparatus or additional energy. Univariate and response surface analyses were used to optimize various parameters of the on-site DLLME-DSSA method. Under optimal conditions, the limits of determination (LODs) were 1.50 µg L^-1 and 0.03-0.09 mg kg^-1 in water and honey, respectively. The relative standard deviations (RSDs) for inter-day (n = 5) and intra-day (n = 5) precision were ≤8.4%, whereas the extraction recoveries and enrichment factors for the BUs ranged from 67.0 to 97.1% and 29 to 34, respectively. Furthermore, the proposed method was used for the on-site extraction and laboratory detection of BUs from real water and honey samples. Theoretical analyses indicated non-covalent interactions (such as hydrogen bonds, electrostatic interactions, van der Waals forces, and π-π interactions) to be the main driving force for extraction. This study introduces a switchable hydrophilic aromatic acid capable of direct solidification into on-site DLLME for the first time, opening new frontiers in the development of on-site sample pretreatment methods.

Recent progress in organic-inorganic hybrid materials as absorbents in sample pretreatment for pesticide detection

Sample pretreatment is essential for trace analysis of pesticides in complex food and environment matrices. Recently, organic-inorganic hybrid materials have gained increasing attention in pesticide extraction and preconcentration. This review highlighted the common organic-inorganic hybrid materials used as absorbents in sample pretreatment for pesticide detection. Furthermore, the preparation and characterization of organic-inorganic hybrid materials were summarized. To obtain a deep understanding of adsorption toward target analytes, the adsorption mechanism and absorption evaluation were discussed. Finally, the applications of organic-inorganic hybrid materials in sample pretreatment techniques and perspectives in the future are also discussed.

Co-precipitation based on layered double hydroxides and anionic surfactants for preconcentration of six benzoylurea insecticides in soft drinks before simultaneous analysis by high-performance liquid chromatography

Layered-double hydroxides (LDHs) modified with anionic surfactants via a co-precipitation method were developed for preconcentrating and simultaneous analysis of six benzoylurea insecticides (BUs) by high-performance liquid chromatography (HPLC). The anionic surfactants with different chain lengths, including sodium dodecylbenzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), sodium 1-nonane sulfonate (SNS), and sodium 1-hexane sulfonate monohydrate (SHS) were investigated to improve the extraction efficiency of LDHs. The SDBS-LDHs provided the highest efficiency for the enrichment of the BUs studied. Under the chosen conditions, enrichment factors in the range of 38-69 and detection limits in the range of 0.1-0.3 μg L^-1 were achieved. Good reproducibilities (RSD < 13.8%) and recoveries (71.4-118.7%) were also obtained. The proposed preconcentration method, used as an in situ procedure offers rapid and simple simultaneous preparation of LDHs and extraction of BUs. The method was successfully applied for residue analysis of BUs in fruit- and flower-derived soft drink samples.

Recent advances in porous organic frameworks for sample pretreatment of pesticide and veterinary drug residues: a review

Rapid and accurate detection of pesticide and veterinary drug residues is a continuing challenge because of the complex matrix effects. Thus, appropriate sample pretreatment is a crucial step for the effective extraction of the analytes and removal of the interferences. Recently, the development of nanomaterial adsorbents has greatly promoted the innovation of food sample pretreatment approaches. Porous organic frameworks (POFs), including polymers of intrinsic microporosity, covalent organic frameworks, hyper crosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks, have been widely utilized due to their tailorable skeletons and pores as well as fascinating features. This review summarizes the recent advances for POFs to be utilized in adsorption and sample preparation of pesticide and veterinary drug residues. In addition, future prospects and challenges are discussed, hoping to offer a reference for further study on POFs in sample pretreatment.

Fabrication of a Magnetic Fluorinated Covalent Organic Framework for the Selective Capture of Benzoylurea Insecticide Residue in Beverages

Efficient capture of benzoylurea insecticide (BU) residue in food is a vital procedure for food safe monitoring. Herein, a core-shell structured magnetic fluorinated covalent organic framework with good magnetic responsiveness and abundant fluorine affinity sites was successfully synthesized, suitable for magnetic solid-phase extraction (MSPE) of BUs. Using a room-temperature synthesis strategy, the magnetic fluorinated covalent organic framework was fabricated by in situ polymerization of 1,3,5-tris(4-aminophenyl) triazine (TAPT) and 2,3,5,6-tetrafluoroterephthaldehyde (TFTA) on the surface of carboxylated Fe₃O₄ nanoparticles. The competitive adsorption experiment and molecular simulation verified that this magnetic fluorinated covalent organic framework possesses favorable adsorption affinity for BUs. This magnetic fluorinated covalent organic framework could be easily regenerated and reused at least eight times with no reduction of enrichment performance. Combining this magnetic fluorinated covalent organic framework-based MSPE with high-performance liquid chromatography-tandem mass spectrometry, a novel sensitive method for the analysis of BUs was developed. In yellow wine and fruit juice samples, good linear correlations were obtained for BUs in the range of 10-2000 and 20-4000 ng·L^-1, respectively. The limit of quantitation of the BUs ranged from 1.4 to 13.3 ng·L^-1 in the two beverage matrices. Desirable precision was achieved, with intraday and interday relative standard deviations lower than 11%.

Preparation of magnetic zeolitic imidazolate framework-8 for magnetic solid-phase extraction of strobilurin fungicides from environmental water samples

In this paper, magnetic zeolitic imidazolate framework-8 composites were synthesized by a simple in situ method and then used for the first time as an adsorbent in magnetic solid-phase extraction for extracting multiple strobilurin fungicides. The magnetic composites were characterized in detail. The results showed that Fe₃O₄ nanoparticles were attached on the surface of zeolitic imidazolate framework-8 with a uniform particle size of 150-200 nm and that the magnetic composites possessed a perfect molecular transfer rate towards strobilurin fungicides. The parameters of the magnetic solid-phase extraction process, including solution pH, adsorption time, solution volume, elution solvent, and elution volume, were investigated. Under the optimum conditions, the recoveries of all five fungicides fell within the range 80.8-109.0% with spiking levels of 10, 20 and 50 ng mL^-1. A magnetic solid-phase extraction-high performance liquid chromatography-tandem mass spectrometry method based on the magnetic composites was established and confirmed to be simple, time-efficient and highly sensitive.

Preparation of chitosan-modified magnetic Schiff base network composite nanospheres for effective enrichment and detection of hippuric acid and 4-methyl hippuric acid

Chitosan-modified magnetic Schiff base network composite nanospheres (Fe₃O₄@SNW@Chitosan) were prepared for the enrichment and detection of hippuric acid (HA) and 4-methyl hippuric acid (4-MHA) via magnetic solid phase extraction (MSPE) connected with HPLC. The SNW was one of the covalent organic framework, which constructed through covalent bonds, shown comprising solvent stability, low density and accessible pores. The obtained Fe₃O₄@SNW@Chitosan has many merits as a magnetic sorbent, including a hydrophilic surface, uniform pore size, unique ordered channel structure, and superparamagnetism. The favourable linearity of this MSPE-HPLC method was in the range of 1-1000 μg L^-1, and LODs of HA and 4-MHA were 0.3 μg L^-1 and 0.2 μg L^-1, respectively. The recoveries in urine samples were range from 95.3 to 109.0 % with the RSD less than 9.6 %. When employed for the enrichment of HA and 4-MHA, Fe₃O₄@SNW@Chitosan exhibited great potential as a candidate for preconcentration.

Nanoparticles Based Extraction Strategies for Accurate and Sensitive Determination of Different Pesticides

Sample preparation methods have become indispensable steps in analytical measurements not only to lower the detection limit but also to eliminate the matrix effect although more sophisticated instruments are being commonly used in routine analyses. Solid phase extraction (SPE) is one of the main extraction/preconcentration methods used to extract and purify target analytes along with simple and rapid procedures but some limitations have led to seek for an easy, sensitive and fast extraction methods with analyte-selective sorbents. Nanoparticles with different modifications have been used as spotlight to enhance extraction efficiency of target pesticides from complicated matrices. Carbon-based, metal and metal oxides, silica and polymer-based nanoparticles have been explored as promising sorbents for pesticide extraction. In this review, different types of nanoparticles used in the preconcentration of pesticides in various samples are outlined and examined. Latest studies in the literature are discussed in terms of their instrumental detection, sample matrix and limit of detection values. Novel strategies and future directions of nanoparticles used in the extraction and preconcentration of pesticides are also discussed.

Phosphonium-based deep eutectic solvent coupled with vortex-assisted liquid-liquid microextraction for the determination of benzoylurea insecticides in olive oil

In this study, a novel method using a phosphonium-based deep eutectic solvent coupled with vortex-assisted liquid-liquid microextraction was investigated for the enrichment and separation of five benzoylurea insecticides in olive oil. The experimental factors affecting the extraction efficiency, including the extractant type, deep eutectic solvent volume, extraction time, and extraction mode, were optimized. Under optimal conditions, good linearity was observed for all target analytes, with correlation coefficients (r) ranging from 0.9971 to 0.9998; the limits of detection were in the range of 1.5 to 7.5 μg/L, and the recoveries of analytes using the proposed method ranged between 66.9 and 111.0%. The simple, rapid, and effective method was successfully applied for detecting target analytes in olive oil sample.

Covalent organic framework Schiff base network-1-based pipette tip solid phase extraction of sulfonamides from milk and honey

In this work, a covalent organic framework Schiff base network-1 (SNW-1), was synthesized based on the Schiff base reaction between terephthalaldehyde and melamine and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and nitrogen adsorption-desorption isotherm analyses. The prepared SNW-1 was employed as pipette tip solid phase extraction adsorbent for the extraction of sulfonamides (SAs) prior to high performance liquid chromatography analysis. The parameters affecting the extraction efficiency, including the salt concentration, sample pH, amount of adsorbent, and types and volume of eluent were investigated in detail. Good linearities were obtained between the peak area and SAs concentration ranging from 5 to 500 ng mL^-1 with correlation coefficients (R²) higher than 0.9998. The limits of detection and RSDs were lower than 0.25 ng mL^-1 and 1.9 %, respectively. The developed method was further applied for the determination of SAs in milk and honey samples with recoveries in the range of 85.8 % - 118.0 % and RSDs less than 9.5 %. The results demonstrate that the SNW-1 shows great potential for the enrichment of trace SAs in complex matrices.

Covalent Organic Framework Composites: Synthesis and Analytical Applications

In the recent years, composite materials containing covalent organic frameworks (COFs) have raised increasing interest for analytical applications. To date, various synthesis techniques have emerged that allow for the preparation of crystalline and porous COF composites with various materials. Herein, we summarize the most common methods used to gain access to crystalline COF composites with magnetic nanoparticles, other oxide materials, graphene and graphene oxide, and metal nanoparticles. Additionally, some examples of stainless steel, polymer, and metal-organic framework composites are presented. Thereafter, we discuss the use of these composites for chromatographic separation, environmental remediation, and sensing.

Covalent Organic Frameworks in Sample Preparation

Covalent organic frameworks (COFs) can be classified as emerging porous crystalline polymers with extremely high porosity and surface area size, and good thermal stability. These properties have awakened the interests of many areas, opening new horizons of research and applications. In the Analytical Chemistry field, COFs have found an important application in sample preparation approaches since their inherent properties clearly match, in a good number of cases, with the ideal characteristics of any extraction or clean-up sorbent. The review article is meant to provide a detailed overview of the different COFs that have been used up to now for sample preparation (i.e., solid-phase extraction in its most relevant operational modes-conventional, dispersive, magnetic/solid-phase microextraction and stir-bar sorptive extraction); the extraction devices/formats in which they have been applied; and their performances and suitability for this task.