Development of a dispersive solid phase extraction method based on in situ formation of adsorbent followed by dispersive liquid–liquid microextraction for extraction of some pesticide residues in fruit juice samples

Polyaniline-coated kapok fibers for convenient in-syringe solid-phase microextraction and determination of organochlorine and pyrethroid pesticide residues in aqueous samples

Pesticides used in agriculture have low polarity and a tendency to accumulate in fatty tissues, posing potential risks to human health. Effective pre-treatment is crucial due to complex sample matrices and low concentrations of pesticide residues typically encountered in instrument analysis. In this study, polyaniline-coated kapok fiber (PANI-KF) was synthesized successfully using in-situ oxidative polymerization for use as sorbents in in-syringe SPME of pyrethroid pesticides (PYRs) and organochlorine pesticides (OCPs) from aqueous samples. Coating the natural KF with PANI maintained the hollow microtubular structure and fiber morphology while significantly enhancing the extraction efficiency. The extraction process was easily conducted by simply pulling and pushing the syringe plunger. The entire extraction process, utilizing 3 mg of PANI-KF, could be completed in approximately 3 min. Density functional theory results indicated that the adsorption mechanism of PANI-KF towards OCPs and PYRs mainly involved van der Waals interactions, π-π interactions, and weak hydrogen bonding interactions. With the coupling of gas chromatography-mass spectrometry, a quantification method was established that exhibited good linearities (R2 > 0.990), and relative recoveries (87.2-108.5 %). The limits of detection ranged from 0.4 to 2.0 ng mL-1 and the matrix effects were negligible (-12.3-16.4 %). The validated in-syringe SPME-GC-MS method was successfully applied to determine pesticide residues in fruit juices, oral liquids and herbal extract granules with satisfactory accuracy and precision. PANI-KF exhibits remarkable promise as a sorbent for the extraction and enrichment of pesticide residues in aqueous samples, thereby contributing to the advancement of pesticide residue determination methodologies.

In-situ formation of CO2-incorportaed solid sorbent for dispersive solid phase extraction of phenolic compounds from water and wastewater samples prior to gas chromatography-flame ionization detector

BACKGROUND

Herein, a new extraction procedure based on in-situ formation of carbon dioxide-incorporated solid sorbent was introduced for dispersive solid phase extraction of phenolic compounds from aqueous samples. In this study, incorporation of carbon dioxide into the structure of a diamine led to the formation of a solid compound in the sample solution that adsorbed the analytes.

RESULTS

The sample solution was mixed with isophorone diamine and placed under carbon dioxide stream. By doing so, isophorone diamine reacted with carbon dioxide and produced a carbamic acid analogue. It was dispersed into the sample solution as tiny particles that adsorbed the analytes. The adsorbed analytes were eluted by a volatile organic solvent and concentrated more by the vaporization of the eluate. The extraction procedure was done at low temperature to limit the releasing carbon dioxide from the produced compound. To obtain the reliable results, the method was validated and the obtained limits of detection and quantification were in the ranges of 0.29-41 and 0.96-1.3 ng/mL, respectively. Acceptable relative standard deviation (≤7.3%) and coefficient of determination (≥0.994) values confirmed the method repeatability and linearity. High enrichment factors (410-435) and extraction recoveries (82-87%) were attained with the introduced method.

SIGNIFICANCE AND NOVELTY

In this work, a chemical reaction was done between isophorone diamine and carbon dioxide in solution. The produced product (sorbent) was insoluble in solution and dispersed in whole parts of the solution as tiny particles. A high contact area between the sorbent and analytes provided high extraction efficiency for the analytes. The method was successful utilized in determining target analytes in real samples and the matrix effect of the samples had no important effect on the obtained results.

Polycarbonate-coated magnetic nanoparticles for the extraction of imipramine and its primary metabolite from urine

This study introduces a reliable and inexpensive magnetic dispersive solid phase extraction to extract imipramine and its primary metabolite (desipramine) from urine samples. To accomplish this aim, Fe3 O4 magnetic nanoparticles were synthesized by sonication, subsequently, polycarbonate was precipitated gradually onto the surface of them to form the adsorbent. Extraction recoveries of 85% and 76%, enrichment factors of 57 and 51, limits of detection of 2.5 and 2.8 μg/L, and limits of quantification of 8.3 and 9.3 μg/L were obtained for imipramine and desipramine under the optimal conditions, respectively. In addition, relative standard deviations for intra- (n = 6) and inter-day (n = 5) precisions at two concentrations (50 and 100 μg/L of each analyte) were less than or equal to 4%. Short extraction time, good repeatability, high enrichment factors, and simplicity are the main advantages of the proposed method.

In-situ formation of the adsorbent based on octadecylamine for the extraction of Ag+ ions from aqueous solutions and its determination by microinjection flame atomic absorption spectrometry

In this research, a dispersive solid phase extraction procedure based on changing the solubility of octadecylamine with pH was proposed to determine Ag+ ions in different water samples. For this purpose, first, the pH of sample solution containing the analyte was adjusted to 10.5. Then desired volume of the octadecylamine dissolved in acidic solution was injected into the solution. Because of the low solubility of octadecylamine in alkaline solution, a cloudy state was formed. The produced octadecylamine particles acted as a complexing agent for Ag+ ions and adsorbent for the formed complex. The obtained cloudy solution was centrifuged and the sedimented particles were removed and dissolved in a diluted nitric acid solution. It was injected into a flame atomic absorption spectrometry to determine the extracted amounts of the analyte. The effect of important parameters such as the amount of octadecylamine, volume of nitric acid, and centrifugation and vortexing conditions on the extraction efficiency of the procedure was studied and optimized. In optimal conditions, the developed method showed a linear range of 0.50-200 µg L-1. The limits of detection and quantification were 0.18 and 0.50 µg L-1, respectively. Extraction recovery was 93.6%. The relative standard deviations were less than 4%. The effectiveness of the method was investigated by determination of Ag+ ions in water and wastewater samples.

In-situ formation of a solid adsorbent for the extraction of some metal ions from crude oil before their determination by microflow nebulizer inductively coupled plasma-mass spectrometry

The presence of heavy metals in crude oil can create different problems on the oil processing and devices as well as pollution of the environment. Establishment of sample preparation methods for the extraction of metals from crude oil is the bottleneck of a successful determination method due to high hydrophobicity and complexity of crude oil matrix. In this study, a dispersive solid phase extraction procedure was developed for the simultaneous extraction of sixteen metal ions based on in-situ formation of an adsorbent in the sample solution. For this purpose, a suitable amount of dithiooxamide was dissolved in an organic solvent and was injected into the sample solution. By this action, dithiooxamide was re-precipitated in the sample solution and adsorbed the ions. The solid particles were separated and then the ions were eluted by a few microliters of choline chloride: 5-amino-8-hydroxyquinoline deep eutectic solvent under sonication. The presented method was validated and broad linear ranges (7.56-50000 ng g^-1) were obtained for calibration curves with coefficient of determination ≥0.992. Acceptable limits of detection (0.003-2.32 ng g^-1) and quantification (0.009-7.56 ng g^-1) were achieved. Good precision (relative standard deviation less than or equal to 4.3% for intra and inter-day precisions) and acceptable extraction recoveries (66-91%) were also obtained. Seven crude oil samples were analyzed and ten metal ions were determined successfully. The method was compared with the methods reported in literature and it was found that the data obtained by this method were reliable and accurate.

Residue Analysis and Risk Exposure Assessment of Multiple Pesticides in Tomato and Strawberry and Their Products from Markets

Pesticides are used on fruit and vegetable crops to obtain greater yield and quality. Residues can be detected in these crops or their products if applied pesticides do not degrade naturally. Therefore, this study aimed to estimate pesticide residues in some strawberry and tomato-based products available in the market for human consumption and associated dietary risks. Contamination with 3-15 pesticides in the tested samples was found. The total number of pesticides detected in the tested samples was 20, belonging to the group of insecticides (84%) and fungicides (16%). Pesticides of cypermethrin, thiamethoxam, chlorpyrifos, and lambda-cyhalothrin appeared at 100% in a number of samples, where the most detected was cypermethrin followed by thiamethoxam. The average values of pesticide residues detected in the tested samples ranged from 0.006 to 0.568 mg kg-1, where it was found that cypermethrin had the highest residue value and appeared in strawberry jam obtained from the market. The recovery rate of pesticides from fortified samples with pyrethroids ranged from 47.5% (fenvalerate) to 127% (lambda-cyhalothrin). Home processing of fortified tomato and strawberry samples had a significant effect on reducing residues in tomato sauce and strawberry jam, where the reduction reached 100%. The results of acute and chronic risk assessment showed that their values were much lower than 100%, indicating minimal risk of dietary intake.

Review of extraction and detection techniques for the analysis of pesticide residues in fruits to evaluate food safety and make legislative decisions: Challenges and anticipations

Fruits are vital parts of the human diet because they include necessary nutrients that the body needs. Pesticide use has increased dramatically in recent years to combat fruit pests across the world. Pesticide usage during production, on the other hand, frequently results in undesirable residues in fruits after harvest. Consumers are concerned about pesticide residues since most of the fruits are directly consumed and even recommended for the patients as dietary supplements. As a result of this worry, pesticide residues in fruits are being randomly monitored to re-assess the food safety situation and make informed legislative decisions. To assess the degree of pesticide residues in fruits, a simple and quick analytical procedure is usually required. As a result, pesticide residue detection (using various analytical techniques: GC, LC and Biosensors) becomes critical, and regulatory directives are formed to regulate their amounts via the Maximum Residue Limit (MRL). Over the previous two decades, a variety of extraction techniques and analytical methodologies for xenobiotic's efficient extraction, identification, confirmation and quantification have been developed, ranging from traditional to advanced. The goal of this review is to give readers an overview of the evolution of numerous extraction and detection methods for pesticide residue analysis in fruits. The objective is to assist analysts in better understanding how the ever-changing regulatory landscape might drive the need for new analytical methodologies to be developed in order to comply with current standards and safeguard consumers.

Modern Analytical Methods for the Analysis of Pesticides in Grapes: A Review

Currently, research on the determination of pesticides in food products is very popular. Information obtained from research conducted so far mainly concerns the development of a methodology to determine the content of pesticides in food products. However, they do not describe the content of the pesticide used in viticulture in the resulting product. Over the past decade, this study has examined analytical methodologies for assessing pesticide residues in grapes. Scopus, Web of Science, Science Direct, PubMed, and Springer databases were searched for relevant publications. The phrases “pesticides” and “grapes” and their combinations were used to search for articles. The titles and annotations of the extracted articles have been read and studied to ensure that they meet the review criteria. The selected articles were used to compile a systematic review based on scientific research and reliable sources. The need to study the detection of pesticide residues in grapes using advanced analytical methods is confirmed by our systematic review. This review also highlights modern methods of sample preparation, such as QuEChERS, SPME, PLE, dLLME, and ADLL-ME, as well as the most used methods of separation and identification of pesticides in grapes. An overview of the countries where residual grape pesticide amounts are most studied is presented, along with the data on commonly used pesticides to control pests and diseases in grape cultivation. Finally, future possibilities and trends in the analysis of pesticide residues in grapes are discussed by various analytical methods.

Polyoxometalate-based materials in extraction, and electrochemical and optical detection methods: A review

Polyoxometalates (POMs) as metal-oxide anions have exceptional properties like high negative charges, remarkable redox abilities, unique ligand properties and availability of organic grafting. Moreover, the amenability of POMs to modification with different materials makes them suitable as precursors to further obtain new composites. Due to their unique attributes, POMs and their composites have been utilized as adsorbents, electrodes and catalysts in extraction, and electrochemical and optical detection methods, respectively. A survey of the recent progress and developments of POM-based materials in these methods is therefore desirable, and should be of great interest. In this review article, POM-based materials, their properties as well as their identification methods, and analytical applications as adsorbents, electrodes and catalysts, and corresponding mechanisms of action, where relevant, are reviewed. Some current issues of the utilization of these materials and their future prospects in analytical chemistry are discussed.

Applications of covalent organic frameworks and their composites in the extraction of pesticides from different samples

Pesticides are used extensively in a wide range of applications and due to their high rate of consumption, they are ubiquitous in the different media and samples like environment, water sources, air, soil, biological materials, wastes (liquids, solids or sludges), vegetables and fruits, where they can persist for long periods. Pesticides often have hazardous side effects and can cause a range of harmful diseases like Parkinson, Alzheimer, asthma, depression and anxiety, cancer, etc, even at low concentrations. To this end, extraction, pre-concentration and determination of pesticides from various samples presents significant challenges caused by sample complexity and the low concentrations of them in many samples. Often, direct extraction and determination of pesticides are impossible due to their low concentrations and the complexity of samples. The main goals of sample preparation are removing interfering species, pre-concentrating target analyte/s and converting the analytes into more stable forms (when needed). The most popular approach is solid-phase extraction due to its simplicity, efficiency, ease of operation and low cost. This method is based on using a wide variety of materials, among which covalent organic frameworks (COFs) can be identified as an emerging class of highly versatile materials exhibiting advantageous properties, such as a porous and crystalline structure, pre-designable structure, high physical and chemical stability, ease of modification, high surface area and high adsorption capacity. The present review will cover recent developments in synthesis and applications of COFs and their composites for extraction of pesticides, different synthesis approaches of COFs, possible mechanisms for interaction of COFs-based adsorbents with pesticides and finally, future prospects and challenges in the fabrication and utilization of COFs and their composites for extraction of pesticides.

New frontiers and prospects of metal-organic frameworks for removal, determination, and sensing of pesticides

Pesticides have been widely used in agriculture to control, reduce, and kill insects. Humans are also being using pesticides to control insidious animals in daily life. By these practices, a huge volume of pesticides is introduced to the environment. Despite broad-spectrum applicability, pesticides also have hazardous effects on both humans and animals at high and low concentrations. Long-term exposure to pesticides can cause different diseases, like leukemia, lymphoma, and cancers of the brain, breasts, prostate, testis, and ovaries. Reproductive disorders from pesticides include birth defects, stillbirth, spontaneous abortion, sterility, and infertility. Therefore, the application of determination and treatment methods for pre-concentration and removal of these toxic materials from the environment appears a vital concern. To date, different materials and approaches have been employed for these purposes. Among these approaches, multifunctional metal-organic frameworks (MOFs)-assisted adsorption and determination processes have always been in the spotlight. These facts are due to exclusive properties of MOFs in terms of the crystallinity, large surface area, high chemical, and physical stability, and controllable structure as well as unique features of adsorption and determination process in terms of simple, easy, cheap, available method and ability to use in large and industrial scales. In the present work, we illustrate the exceptional features of MOFs as well as the possible mechanism for the adsorption of pesticides by MOFs. The use of these fantastic materials for pre-concentration and removal of pesticides are extensively explored. In addition, the performance of MOFs was compared with other adsorbents. Finally, the new frontiers and prospects of MOFs for the determination, sensing, and removal of pesticides are presented.

New Trend in the Extraction of Pesticides from the Environmental and Food Samples Applying Microextraction Based Green Chemistry Scenario: A Review

This review focused on the green microextraction methods used for the extraction of pesticides from the environmental and food samples. Microextraction techniques have been explored and applied in various fields of analytical chemistry since its beginning, as evinced by the numerous reviews published. The success of any technique in science and technology is measured by the simplicity, environmentally friendly, and its applications; and the microextraction technique is highly successive. Deliberations were attentive to studies where efforts have been made to validate the methods through the inter-laboratory comparison study to assess the analytical performance of microextraction techniques against conventional methods. Succinctly, developed microextraction methods are shown to impart significant benefits over conventional techniques. Provided that the analytical community continues to put forward attention and resources into the growth and validation of the microextraction technique, a promising future for microextraction is forecasted.

Synthesis of Magnetic Metal-Organic Frame Material and Its Application in Food Sample Preparation

A variety of contaminants in food is an important aspect affecting food safety. Due to the presence of its trace amounts and the complexity of food matrix, it is very difficult to effectively separate and accurately detect them. The magnetic metal-organic framework (MMOF) composites with different structures and functions provide a new choice for the purification of food matrix and enrichment of trace targets, thus providing a new direction for the development of new technologies in food safety detection with high sensitivity and efficiency. The MOF materials composed of inorganic subunits and organic ligands have the advantages of regular pore structure, large specific surface area and good stability, which have been thoroughly studied in the pretreatment of complex food samples. MMOF materials combined different MOF materials with various magnetic nanoparticles, adding magnetic characteristics to the advantages of MOF materials, which are in terms of material selectivity, biocompatibility, easy operation and repeatability. Combined with solid phase extraction (SPE) technique, MMOF materials have been widely used in the food pretreatment. This article introduced the new preparation strategies of different MMOF materials, systematically summarizes their applications as SPE adsorbents in the pretreatment of food contaminants and analyzes and prospects their future application prospects and development directions.